942 resultados para equilibrium partition coefficient
Resumo:
Includes bibliography.
Resumo:
The determination of the reflection coefficient of shear waves reflected from a solid-liquid interface is an important method in order to study the viscoelastic properties of liquids at high frequency. The reflection coefficient is a complex number. While the magnitude measurement is relatively easy and precise, the phase measurement is very difficult due to its strong temperature dependence. For that reason, most authors choose a simplified method in order to obtain the viscoelastic properties of liquids from the measured coefficient. In this simplified method, inconsistent viscosity results are obtained because pure viscous behavior is assumed and the phase is not measured. This work deals with an effort to improve the experimental technique required to measure both the magnitude and phase of the reflection coefficient and it intends to report realistic values for oils in a wide range of viscosity (0.092 - 6.7 Pa.s). Moreover, a device calibration process is investigated in order to monitor the dynamic viscosity of the liquid.
Resumo:
Using the results recently obtained for computing integrals over (non-minimal) pure spinor superspace, we compute the coefficient of the massless two-loop four-point amplitude from first principles. Contrasting with the mathematical difficulties in the RNS formalism where unknown normalizations of chiral determinant formulæ force the two-loop coefficient to be determined only indirectly through factorization, the computation in the pure spinor formalism can be smoothly carried out. © SISSA 2010.
Resumo:
Includes bibliography
Resumo:
Includes bibliography
Resumo:
Includes bibliography
Resumo:
Poor posture control has been associated with an increased risk of falls and mobility disability among older adults. This study was conducted to assess the test-retest reliability and sensitivity to group differences regarding the time-limit (TLimit) of one-leg standing and selected balance parameters obtained with a force platform in older and young adults. A secondary purpose was to assess the relationship between TLimit and these balance parameters. Twenty-eight healthy older adults (age: 69±5years) and thirty young adults (age: 21±4years) participated in this study. Two one-leg stance tasks were performed: (1) three trials of 30s maximum and (2) one TLimit trial. The following balance parameters were computed: center of pressure area, RMS sway amplitude, and mean velocity and mean frequency in both the anterio-posterior and medio-lateral directions. All balance parameters obtained with the force platform as well as the TLimit variable were sensitive to differences in balance performance between older and young adults. The test-retest reliability of these measures was found to be acceptable (ICC: 0.40-0.85), with better ICC scores observed for mean velocity and mean frequency in the older group. Pearson correlations coefficients (r) between balance parameters and TLimit ranged from -0.16 to -0.54. These results add to the current literature that can be used in the development of measurement tools for evaluating balance in older and young adults. © 2013 Elsevier Ltd.
Resumo:
We consider a family of two-dimensional nonlinear area-preserving mappings that generalize the Chirikov standard map and model a variety of periodically forced systems. The action variable diffuses in increments whose phase is controlled by a negative power of the action and hence effectively uncorrelated for small actions, leading to a chaotic sea in phase space. For larger values of the action the phase space is mixed and contains a family of elliptic islands centered on periodic orbits and invariant Kolmogorov-Arnold-Moser (KAM) curves. The transport of particles along the phase space is considered by starting an ensemble of particles with a very low action and letting them evolve in the phase until they reach a certain height h. For chaotic orbits below the periodic islands, the survival probability for the particles to reach h is characterized by an exponential function, well modeled by the solution of the diffusion equation. On the other hand, when h reaches the position of periodic islands, the diffusion slows markedly. We show that the diffusion coefficient is scaling invariant with respect to the control parameter of the mapping when h reaches the position of the lowest KAM island. © 2013 American Physical Society.
Resumo:
Food base excess (BE, mEq/kg) can be calculated from the diet macroelements, together with either the sulfur amino acids methionine and cysteine (BEaa) or total sulfur (BEs) concentrations. The present study compared the use of sulfur or methionine and cysteine for calculating the food BE (experiment 1) and investigated the influence of food BE on blood gas analysis and the urine pH of cats, and proposes a prediction equation to estimate the urine pH of cats fed kibble diets based on the calculated food BE (experiments 2 and 3). In experiment 1, nine healthy, adult cats were used in a change-over design and fed with nine commercial dry cat foods. The cats were housed in metabolism cages over seven days for adaptation and three days for total urine collection. All of the urine produced over 24h was pooled by cat and diet. The cats' acid-base status was assessed through blood gas analysis after 10 days of diet consumption. A mean difference of -115mEq/kg between BEs and BEaa was observed, which could be explained by a greater concentration of sulfur in the whole diet than in methionine and cysteine. Urine pH presented a stronger correlation with food BEs (R2=0.95; P<0.001) than with food BEaa (R2=0.86; P<0.001). Experiment 2 included 30 kibble diets, and each diet was tested in six cats. The food BEs varied between -180 and +307mEq/kg, and the urine pH of the cats varied between 5.60 and 7.74. A significant correlation was found between the measured urine pH and the food BEs (urinary pH=6.269+[0.0036×BEs]+[0.000003×BEs2]; R2=0.91; P<0.001). In experiment 3, eight kibble diets were tested (food BEs between -187mEq/kg and +381mEq/kg) to validate the equation proposed in experiment 2 and to compare the obtained results with previously published formulae. The results of the proposed formula presented a high concordance correlation coefficient (0.942) and high accuracy (0.979) with the measured values, and the estimates of urine pH did not differ from the values obtained in cats (P>0.05). The cats' venous blood pH, bicarbonate, and blood BE were correlated with food BEs (P<0.001); the consumption of diets with low food BEs induced a reduction in these parameters. In conclusion, food macroelement composition has a strong influence on cats' acid-base equilibrium and food BEs calculation is a useful tool to formulate and balance kibble diets for felines. © 2013 Elsevier B.V.
Resumo:
In this paper, we consider a concept of local Nash equilibrium for non-cooperative games - the so-called weak local Nash equilibrium. We prove its existence for a significantly more general class of sets of strategies than compact convex sets. The theorems on existence of the weak local equilibrium presented here are applications of Brouwer and Lefschetz fixed point theorems. © 2013 Juliusz Schauder Centre for Nonlinear Studies Nicolaus Copernicus University.
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O biodiesel é definido como sendo uma mistura de monoésteres de ácidos graxos derivados de gorduras animal ou óleos vegetais, obtido por meio do processo de transesterificação com alcoóis de cadeia curta. Durante a sua produção é utilizada uma quantidade em excesso de álcool e um catalisador para favorecer a reação de formação dos ésteres; desta forma a corrente de saída do reator contém o catalisador, o álcool que não reagiu e os produtos da transesterificação, biodiesel e glicerina, formando um sistema bifásico; dependendo do grau de solubilidade desses compostos, pode haver quantidades de biodiesel na fase rica em glicerina e quantidades de glicerina na fase rica em biodiesel. Durante o processo de purificação do biodiesel é necessário executar uma lavagem com água, para promover a retirada do catalisador e impurezas do produto de interesse. Devido à quantidade de compostos envolvidos na produção e purificação é essencial conhecer os dados de equilíbrio líquido-líquido para poder predizer as proporções em que os compostos coexistem e, posteriormente, proceder com a purificação sob condições adequadas para obtenção do biodiesel com maior rendimento e auxiliar no projeto do reator e sistemas de separação. Os objetivos desse trabalho foram produzir o biodiesel a partir de uma planta oleaginosa nativa da região, a castanha do Brasil (Bertholletia excelsa H. B. K.) e, determinar dados de equilíbrio líquido-líquido (ELL) para os sistemas ternários: biodiesel de castanha do Brasil + metanol + glicerina e biodiesel de castanha do Brasil + metanol + água nas temperaturas de 30°C e 50°C. O biodiesel produzido foi inicialmente caracterizado segundo as normas da Agência Nacional de Petróleo (ANP) utilizando métodos físico-químicos. Os dados obtidos foram posteriormente correlacionados com os modelos termodinâmicos NRTL e UNIQUAC para o calculo do coeficiente de atividade de cada componente na fase liquida, com estimativa de novos parâmetros de interação energética. Os resultados obtidos com a modelagem foram satisfatórios, e foi observado que o modelo NRTL representou melhor os dados experimentais.
Resumo:
Este trabalho utilizou uma amostra proveniente da bacia de S. Luis-Grajaú, MA, que consiste numa mistura na qual há predominantemente palygorskita e dolomita, abordando a existência desta nova ocorrência, sugerindo um método de beneficiamento e sua aplicação como adsorvente de fósforo para utilização na agricultura, já que a dolomita funciona como corretor de solos, enquanto a palygorskita tem a função de carreador de nutrientes. Primeiramente foi feita a caracterização química e mineralógica por meio de análise de difração de raios X, fluorescência de raios X, microscopia eletrônica de varredura, e separação das frações de areia, silte e argila. Foram ainda realizados ensaios de decantação e de adsorção de fósforo, com determinação da curva cinética. Após a análise de difração de raios X pode-se afirmar que a amostra é constituída principalmente de palygorskita e dolomita, apresentando também ilita, clorita e quartzo. Também foi possível verificar que os diferentes tipos de desagregação utilizados não apresentaram diferenças significativas nos difratogramas de raios X das amostras. Quanto à separação areia-silte-argila, apesar de se basear somente na granulometria, apresentou uma eficiência razoável na separação mineralógica, assim como os ensaios de decantação, onde se verificou que após 24 h a dolomita praticamente desaparece do sobrenadante. A determinação da curva cinética de adsorção mostrou que 2 h não é suficiente para que haja a adsorção do fósforo, sendo necessárias 24 h para atingir o equilíbrio da reação. Os ensaios de adsorção de fósforo mostraram eficiência acima de 91% do fósforo inicialmente presente na solução e o valor máximo adsorvido por grama da amostra foi de 0,607 mg. A correlação com os modelos de isotermas de adsorção estudados mostrou melhor resultado para a isoterma de Langmuir-Freundlich, com coeficiente de correlação 0,9993, o que pode ser atribuído ao fato da adsorção ocorrer em mais de uma camada.