674 resultados para epidote
Resumo:
The book is devoted to geology of the Philippine Sea floor. This region is studied most extensively among other marginal seas of the Pacific Ocean. Rocks of the sedimentary and basalt layers within this sea have been studied during five legs of D/S Glomar Challenger. International geological expedition on board R/V Dmitry Mendeleev carried out according to the Project ''Ophiolites of Continents and Comparable Rocks of the Ocean Floor''obtained unique collection of rocks from the second and third layers of the ocean crust in the Philippine Sea. The book provides detailed petrographic and geochemical description of igneous and sedimentary formations from the Philippine Sea and compares them with rocks of the continental ophiolite association. An analysis of structure and history of the ocean crust formation in the region is based on all known geological information. The main periods of tectonic movement activation and nature of their manifestations within the sea are shown.
Resumo:
A study was made of mineral composition of sand- and silt-sized fractions of recent clastic (riftogenic) sediments and solidified deposits collected from the bottom of the Romanche Trench during the first voyage of R/V Akademik Kurchatov. Similarity between mineral compositions of sediments and bedrocks (ultrabasites, gabbroids, diabases) was established. This similarity is a basis for considering the mineral complex of the deposits that have been derived from the bedrocks of the trench slopes, and have formed due to their submarine denudation accompanied by tectonic crushing. The same mineral composition was found in pieces of older consolidated deposits; this suggests that conditions of sedimentation similar to those at recent times have existed for a long time in the Romanche Trench.
Resumo:
The origin and modes of transportation and deposition of inorganic sedimentary material of the Black Sea were studied in approximately 60 piston, gravity, and Kasten cores. The investigation showed that the sediment derived from the north and northwest (especially from the Danube) has a low calcite-dolomite ratio and a high quartz-feldspar ratio. Rock fragments are generally not abundant; garnet is the principal heavy mineral and illite is the predominant clay mineral. This sedimentary material differs markedly from that carried by Anatolian rivers, which is characterized by a high calcite-dolomite ratio and a low quartz-feldspar ratio. Rock fragments are abundant; pyroxene is the principal heavy mineral and montmorillonite is the predominant clay mineral. In generel, the clay fraction is large in all sediments (27.6-86.9 percent), and the lateral distributian indicates an increase in clay consent from the coasts toward two centers in the western and eastern Black Sea basin. Illite is the most common clay mineral in the Black Sea sediments. The lateral changes in composition of the clay mineral can easily be traced to the petrologic character of northern (rich in illite) and southern (rich in montmorillonite) source areas. In almost all cores, a rhythmic change of the montmorillonite-illite ratio with depth was observed. These changes may be related to the changing influence of the two provinces during the Holocene and late Pleistocene. Higher montmorillonite content seems to indicate climctic changes, probably stages of glaciation end permafrost in the northern area, at which time the illite supply was diminished to a large extent. The composition of the sand fraction is relatad to the different petrologic and morphologic characteristics of two major source provimces: (1) a northern province (rich in quartz, feldspars, and garnet) characterized by a low elevation, comprising the Danube basin area and the rivers draining the Russian platform; and (2) a southern province (rich in pyroxene and volcanic and metamorphic rocks) in the mountainous region of Anatolia and the Caucasus, characterized by small but extremely erosive rivers. The textural properties (graded bedding) of the deep-sea send layers clearly suggest deposition from turbidity currents. The carbonate content of the contemporary sediments ranges from 5 to 65 percent. It increases from the coast to a maximum in two centers in the western and eastern basin. This pattern reflects the distribution of the <2-µm fraction. The contemporary mud sedimentation is governed by two important factors: (1) the deposition of terrigenous allochthonous material of low carbonate content originating from the surrounding hinterland (northern and southern source areas), and (2) the autochthonous production of large quantities of biogenic calcite by coccolithophores during the last period of about 3,000-4,000 years.
Resumo:
New data on lithology and stratigraphy of Cenozoic sediments from the Clarion Transform Fault Zone (Pacific Ocean) have been obtained on the base of polygon studies. It has been established that on different blocks (uplifted and subsided) of the Clarion tectonic structure deposits of different age (Eocene to Quaternary) occur. Unconsolidated sediments have been deposited under pelagic conditions since Eocene (probably, since Early Cretaceous) until now. Their mineral composition and content of different ore components are given.
Resumo:
Soviet sedimentologists use the term "coarse silt" to denote the size fraction 0.1 to 0.05 mm (50-100 µm). Petelin (1961) has shown that this fraction is most diagnostic for terrigeneous and volcanogenic mineral assemblages and provinces in Recent deep-sea sediments, because of its greatest variability of both heavy and light non-opaque minerals, which may be easily identified by the common immersion method. We believe that the fraction is suitable for mineralogical study of unconsolidated and friable sediments from DSDP cores as well, if the objective is to investigate their source area and transporation tracks. In the case of fine-grained oceanic sediments, mineral composition of the coarse silt does not differ markedly from that of the "coarse fraction" (>62 µm).
Resumo:
During Legs 118 and 176, Ocean Drilling Program Hole 735B, located on Atlantis Bank on the Southwest Indian Ridge, was drilled to a total depth of 1508 meters below seafloor (mbsf) with nearly 87% recovery. The recovered core provides a unique section of oceanic Layer 3 produced at an ultraslow spreading ridge. Metamorphism and alteration are extensive in the section but decrease markedly downward. Both magmatic and hydrothermal veins are present in the core, and these were active conduits for melt and fluid in the crust. We have identified seven major types of veins in the core: felsic and plagioclase rich, plagioclase + amphibole, amphibole, diopside and diopside + plagioclase, smectite ± prehnite ± carbonate, zeolite ± prehnite ± carbonate, and carbonate. A few epidote and chlorite veins are also present but are volumetrically insignificant. Amphibole veins are most abundant in the upper 50 m of the core and disappear entirely below 520 mbsf. Felsic and plagioclase ± amphibole ± diopside veins dominate between ~50 and 800 mbsf, and low-temperature smectite, zeolite, and prehnite veins are present in the lower 500 m of the core. Carbonate veinlets are randomly present throughout the core but are most abundant in the lower portions. The amphibole veins are closely associated with zones of intense crystal plastic deformation formed at the brittle/ductile boundary at temperatures above 700°C. The felsic and plagioclase-rich veins were formed originally by late magmatic fluids at temperatures above 800°C, but nearly all of these have been overprinted by intense hydrothermal alteration at temperatures between 300° and 600°C. The zeolite, prehnite, and smectite veins formed at temperatures <100°C. The chemistry of the felsic veins closely reflects their dominant minerals, chiefly plagioclase and amphibole. The plagioclase is highly zoned with cores of calcic andesine and rims of sodic oligoclase or albite. In the felsic veins the amphibole ranges from magnesio-hornblende to actinolite or ferro-actinolite, whereas in the monomineralic amphibole veins it is largely edenite and magnesio-hornblende. Diopside has a very narrow range of composition but does exhibit some zoning in Fe and Mg. The felsic and plagioclase-rich veins were originally intruded during brittle fracture at the ridge crest. The monomineralic amphibole veins also formed near the ridge axis during detachment faulting at a time of low magmatic activity. The overprinting of the igneous veins and the formation of the hydrothermal veins occurred as the crustal section migrated across the floor of the rift valley over a period of ~500,000 yr. The late-stage, low-temperature veins were deposited as the section migrated out of the rift valley and into the transverse ridge along the margin of the fracture zone.
Resumo:
Coring during Integrated Ocean Drilling Program Expeditions 315, 316, and 333 recovered turbiditic sands from the forearc Kumano Basin (Site C0002), a Quaternary slope basin (Site C0018), and uplifted trench wedge (Site C0006) along the Kumano Transect of the Nankai Trough accretionary wedge offshore of southwest Japan. The compositions of the submarine turbiditic sands here are investigated in terms of bulk and heavy mineral modal compositions to identify their provenance and dispersal mechanisms, as they may reflect changes in regional tectonics during the past ca. 1.5 Myrs. The results show a marked change in the detrital signature and heavy mineral composition in the forearc and slope basin facies around 1 Ma. This sudden change is interpreted to reflect a major change in the sand provenance, rather than heavy mineral dissolution and/or diagenetic effects, in response to changing tectonics and sedimentation patterns. In the trench-slope basin, the sands older than 1 Ma were probably eroded from the exposed Cretaceous-Tertiary accretionary complex of the Shimanto Belt and transported via the former course of the Tenryu submarine canyon system, which today enters the Nankai Trough northeast of the study area. In contrast, the high abundance of volcanic lithics and volcanic heavy mineral suites of the sands younger than 1 Ma points to a strong volcanic component of sediment derived from the Izu-Honshu collision zones and probably funnelled to this site through the Suruga Canyon. However, sands in the forearc basin show persistent presence of blue sodic amphiboles across the 1 Ma boundary, indicating continuous flux of sediments from the Kumano/Kinokawa River. This implies that the sands in the older turbidites were transported by transverse flow down the slope. The slope basin facies then switched to reflect longitudinal flow around 1 Ma, when the turbiditic sand tapped a volcanic provenance in the Izu-Honshu collision zone, while the sediments transported transversely became confined in the Kumano Basin. Therefore, the change in the depositional systems around 1 Ma is a manifestation of the decoupling of the sediment routing pattern from transverse to long-distance axial flow in response to forearc high uplift along the megasplay fault.
Resumo:
Um die Insel Fehmarn und an der Nordküste Wagriens wurden rund 2500 Strand-, Flachwasser- und Seesandproben zum Erkennen der Materialtransportwege sedimentpetrographisch untersucht. Für die Schwermineralbestimmung wurde hauptsächlich die Fraktion 0,2-0,1 mm herangezogen, da diese für die vorliegenden Sedimente charakteristisch ist. Da die Mineralzusammensetzung der Sedimente im gesamten Untersuchungsgebiet gleich ist, also nirgends örtlich sog. Leitminerale zugeführt werden, wurden bei der Auswertung der Analysenergebnisse die hydrographischen Verhältnisse der westlichen Ostsee und die Abhängigkeit des Sedimentes von der Kraft des bewegten Meerwassers beachtet. Bezüglich der Abhängigkeit des transportierten Materials von der Wasserkraft werden drei voneinander abweichende Systeme, nämlich der Strand, die Brandungszone und das tiefere Wassergebiet, erkannt. Am Strand ist die angewandte Untersuchungsmethode sowohl an langgestreckten Küsten als auch in stark untergliederten Ufergebieten zum Erkennen der Sandwanderbahnen geeignet. Erosion und Neuzuführung von Material auf dem Transportwege zeigen das gleiche mineralische Bild, und eine Entscheidung, welcher dieser beiden Fälle tatsächlich vorliegt, kann nur im Gelände getroffen werden. Die Korngrößenanalyse allein ist zur Beantwortung vorliegender Fragestellungen nicht brauchbar, weil durch gegebene hydrographische Bedingungen die Korngröße in Transportrichtung sowohl abnehmen als auch zunehmen kann. In Strandgebieten mit veränderter natürlicher Beschaffenheit der Sedimente und an Küsten mit ausgedehnten vorgelagerten materialliefernden Abrasionsflächen ist die Grenze der Methode aufgezeigt. Höfte, Haken und Sandinseln zeigen jeweils typische mineralische Zusammensetzungen ihres Strandes, aus welchen die Entstehung der betreffenden Anlandungsformen abgeleitet werden kann. Quer über die Brandungszone weisen die Sedimente auf engem Raum wechselnde Mineralzusammensetzung auf, aus der auf die örtlichen hydrographischen Verhältnisse geschlossen werden kann. Zum Vergleich sedimentpetrographischer Ergebniswerte sind nur Sande, die unter gleichen Ablagerungsbedingungen entstanden sind, geeignet. Zum Erkennen der Materialwanderwege wurden entweder Sandproben von den Riffkämmen oder aus den Rinnen zwischen zwei Sandanhäufungszonen untersucht. In beiden Fällen wurden die Transportrichtungen erkannt. In Gebieten, in denen die Strandsanduntersuchungen negativ verliefen, ließen die Riffsandproben Schlüsse auf die Materialschüttungsrichtungen zu. An exponierten Küsten mit mehreren wirksamen Windrichtungen darf jedoch nicht von dem einen auf das andere Wandersystem geschlossen werden. Eine Umkehr der Materialvertriftung zwischen Flachwasser und Strand kann vorliegen. Im tieferen Wasser ist es möglich, mit gleicher Methode unter Berücksichtigung der Morphologie des Meeresgrundes die Materialschüttungsrichtung zu erkennen. Zur Sedimentuntersuchung auf Linienprofilen sind nur Proben gleicher Wassertiefe geeignet; die Sonderung des Materials nach der Tiefe muß beachtet werden. Aus den ermittelten sedimentpetrographischen Werten lassen sich eine Reihe von Beziehungen ablesen, die zur Deutung der Mineralgesellschaft und für die Auswertung der Untersuchungsergebnisse herangezogen werden können. Als regionales Ergebnis der vorstehenden Untersuchung kann eine Karte der Küsten Fehmarns und Nordoldenburgs vorgelegt werden, in der die Sandwanderungswege am Strand, in der Flachwasserzone und in den daran anschließenden tieferen Wassergebieten dargestellt sind.