Diurnal and nocturnal temperatures for Atlantic salmon postsmolts (Salmo salar L.) during their early marine life

Data storage tags (DSTs) were applied to Atlantic salmon (Salmo salar L.) smolts during their seaward migration in the spring of 2002 at a fish counting fence on Campbellton River, Newfoundland. Our objectives were to discover whether or not salmon smolts could carry DSTs and survive, whether or not useful data on thermal habitat could be obtained and interpreted, and whether or not salmon smolts moved vertically in the water column. Data were downloaded from 15 of the recovered tags and revealed the hourly water temperatures experienced by the fish for periods of 3 to 71 days. The data on the DSTs were analyzed for temperature patterns in relation to migration behavior and diurnal movement of the fish. While in the sea, the DSTs recorded night temperatures of 12.5°C, which were higher than day temperatures of 11.6°C; the record from moored recorders, however, indicated that sea temperatures actually declined at night. It is hypothesized that posts-molts avoid avian predators during daylight hours by positioning themselves deeper in the water column and that they were pursuing prey during the deeper vertical descents or ascents noted during the periods of more rapid changes in temperature.

Shelf life of dried products from small indigenous fish species under various packing and storage conditions

The overall quality of five SIS products was found in good condition up to 2 months storage on the basis of organoleptic, biochemical and bacteriological characteristics and all the products was excellent in sealed packed condition up to 45 days of storage. However, quality of the products stored in open air atmospheric temperature was found excellent for first 15 days. In an average the initial moisture content was in the range of 13.5 to 15.0% with highest moisture content in puti and lowest in chapila. At the end of the 60 days the moisture content reached to the range of 18.5 to 19.0% which was more or less near the recommended limit of 16% for dried fishery products. The moisture content beyond the recommended limit as the storage period increased further and at the end of 90 days the moisture content increased to the range of 22.9 to 24% when organoleptically the product quality became very poor. The changes in the value of total volatile base nitrogen (TVB-N), peroxide value (PO), moisture and aerobic plate count (APC) of solar tunnel dried products in sealed polythene packages were investigated during 60 days of storage. There was little or no differences in TVB-N, PO and bacterial load of each species packed under various polythene density. The initial TVB-N values were in the range of 10.30 to 12.40 mg/100g of the samples. TVB-N value increased slowly up to the end of the storage period and was to in the range of 46.20 to 57.00 mg/1 00 g of sample. Initially the peroxide values (P.O.) were in the range of 6.54 to 8.40 m.eq./kg oil of the samples. During 60 days of storage, P.O. values increased slowly and at the end of the storage period these values reached to the range of 22.00 to 25.30meq./kg of sample. The initial APC was in the range 5.3xl04-7.3x104 CFU/g. The bacterial load increased slowly and at the end of the 60 days storage period reached to the range 6.6x106 - 8.6x107 CFT/g.

Shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions

A study was conducted on the shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions. Organoleptically dried products were found in good condition after a storage period of 60 days in ambient and chilled conditions. The moisture content, TVB-N value and bacterial load slightly increased during 60 days of storage in ambient and chilled conditions. The changes in moisture content and bacterial load were faster in ambient temperature than in chilled storage condition whereas changes in TVB-N value was higher in chilled condition than in ambient temperature. The initial moisture content was in the range of 13.71% to 22.84%. After 60 days of storage in ambient and chilled condition the moisture content of dried products was in the range of 15.09% to 25.11% and 14.49% to 25.01%, respectively. The initial TVB-N value was in the range of 10.64 to 17.52 mg/100g and after 60 days of storage in ambient and chilled condition, TVB-N value was in the range of 29.00 to 34.82 mg/100g and 31.41 to 39.11 mg/100g, respectively. The initial bacterial load was in the range of 1.91x10 super(8) to 2.84x10 super(8) and after 60 days of storage in ambient and chilled condition, the bacterial load was in the range of 6.2x10 super(8) to 1.8x10 super(9) and 5.75x10 super(7) to 5.05x10 super(8) CFU/g, respectively. The results of the present study indicated that it is necessary to store high quality dried products in sealed packed in chilled condition to ensure good quality up to a certain period of time.

Product life trade-offs: what if products fail early?

Increasing product life allows the embodied emissions in products to be spread across a longer period but can mean that opportunities to improve use-phase efficiency are foregone. In this paper, a model that evaluates this trade-off is presented and used to estimate the optimal product life for a range of metal-intensive products. Two strategies that have potential to save emissions are explored: (1) adding extra embodied emissions to make products more sturdy, increasing product life, and (2) increasing frequency of use, causing early product failure to take advantage of improvements in use-phase efficiency. These strategies are evaluated for two specific case studies (long-life washing machines and more frequent use of vehicles through car clubs) and for a range of embodied and use-phase intensive products under different use-phase improvement rate assumptions. Particular emphasis is placed on the fact that products often fail neither at their design life nor at their optimal life. Policy recommendations are then made regarding the targeting of these strategies according to product characteristics and the timing of typical product failure relative to optimal product life.

Effects of deposition conditions on composition and thermal cycling life of lanthanum zirconate coatings

Lanthanum, zirconate (La2Zr2O7, LZ) coatings were prepared under four different deposition conditions by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, surface and cross-sectional morphology, cyclic oxidation behavior of these coatings were studied. Elemental analysis indicates that the coating composition has partially deviated from the stoichiometry of pyrochlore, and the existence of excess La2O3 is also observed. The deviation could be reduced by properly controlling the electron beam current or by changing the ingot composition.

Early development of germlings of Sargassum thunbergii (Fucales, Phaeophyta) under laboratory conditions

Morphology and culture studies on germlings of Sargassum thunbergii (Mertens et Roth) Kuntze were carried out under controlled laboratory conditions. Growth characteristics of these germlings grown under different temperatures (from 10 to 25A degrees C), irradiances (from 9 to 88 mu mol photons m(-2) s(-1)), and under blue and white light conditions are described. The development of embryonic germlings follows the classic "8 nuclei 1 egg" type described for Sargassaceae. Fertilized eggs spent 5-6 h developing into multicellular germlings with abundant rhizoids after fertilization. Under conditions of 20A degrees C, 44 mu mol photons m(-2) s(-1) and photoperiod of 12 h, young germlings with one or two leaflets reached 2-3 mm in length after 8 weeks. Temperature variations (10, 15, 20, 25A degrees C) under 88 mu mol photons m(-2) s(-1) significantly influenced the growth rate within the first week, although this effect became less obvious after 8 weeks, especially at 15 and 20A degrees C. Variation in germling growth was highly significant under different irradiances (9, 18, 44, 88 mu mol photons m(-2) s(-1)) at 25A degrees C. Low temperature (10A degrees C) reduced germling growth. Growth of germlings cultured under blue light was lower than in white light. Optimal growth of these germlings occurred at 25A degrees C and 44 mu mol photons m(-2) s(-1).

Effects of temperature and irradiance on early development of Chondrus ocellatus Holm (Gigartinaceae, Rhodophyta)

Chondrus is a type of commercially produced red seaweed that widely used for food and carrageen extraction. Although the natural life history of the alga had been well understood, the factors influencing development of the tetraspore and carpospore remain poorly understood. In the perspective of seedling resources, the regulation of early development is crucial for the seedling nursing; therefore, it is necessary to understand the physiological influences during its early development. In this study, we studied the effects of temperature and irradiance on the early development of Chondrus ocellatus Holm under laboratory conditions. The released tetraspores and carpospores were cultivated at different temperatures (10-28 degrees C) and irradiances ( 10, 60 mu mol photons m(-2)s(-1)) with a photoperiod of 12L:12D. The results indicate that both tetraspores and carpospores are tolerant to temperatures of 10-25 degrees C, and have the highest relative growth rate at 20 degrees C. Irradiance variances influenced the growth of the discoid crusts, and the influence was more significant with increasing temperature; 60 mu mol photons m(-2)s(-1) was more suitable than 10 mu mol photons m(-2)s(-1). The optimum temperature and irradiance for the development of seedlings was 20 degrees C and 60 mu mol photons m(-2)s(-1), respectively.

Formation and early development of tetraspores of Gracilaria lemaneiformis (Gracilaria, Gracilariaceae) under laboratory conditions

Morphological and culture studies of tetraspores of Gracilaria lemaneiformis were carried out under laboratory conditions. Relationships of germination rate, diameter and survival rate of tetraspores from 1st generation branches with grads of temperature and irradiance were determined, respectively. The result showed that 1st generation branches is in the majority of the tetraspores shedding and tetraspores from which had highest survival rates than other parts of the sporophytic plant. The time tetraspores used developing from giant unicells to diads, which both existed on the epidermis, then to tetraspores off the matrix, was only approximately 3 weeks all through. However, tetraspores spent more than two months developing into germlings of gametophytes. It was shown that temperature variation (10, 15, 25, 30 degrees C) with the light of 30 mu mol m(-2) s(-1) had significant effects on the germination rate and diameter, but had no apparent effect on survival rate (ANOVA, P < 0.01). Germination rates of tetraspores reached the maximum at 20 degrees C, which was significantly higher than those at other temperature levels (P < 0.01), whereas 15 degrees C seemed to be optimal temperature for the diameter. All the three growth parameters (germination rate, diameter and survival rate) yield highly significant variations with irradiance treatments at room temperature (ANOVA, P < 0.01). The optimal germination rate was detected at the irradiance of 30 mu mol m(-2) s(-1) (P < 0.01). The photon flux density which exceeds 480 nnol m(-2) s(-1) have apparently negative effect on diameter and survival rate. (c) 2005 Elsevier B.V. All rights reserved.

Life and letters of Fathers Ponziglione, Schoenmakers, and other early Jesuits at Osage mission. Sketch of St. Francis' church. Life of Mother Bridget. By W.W. Graves . .

http://www.archive.org/details/ponziglionescho00gravrich

Historical sketch of the Flathead Indian nation from the year 1813 to 1890 : embracing the history of the establishment of St. Mary's Indian Mission in the Bitter Root Valley, Mont. : with sketches of the missionary life of Father Ravalli and other early missionaries : wars of the Blackfeet and Flatheads and sketches of history, trapping and trading in the early days / by Peter Ronan.

http://www.canadiana.org/ECO/mtq?doc=16974 View document online

A knowledge management system to optimise comfort throughout the building life-cycle

Comfort is, in essence, satisfaction with the environment, and with respect to the indoor environment it is primarily satisfaction with the thermal conditions and air quality. Improving comfort has social, health and economic benefits, and is more financially significant than any other building cost. Despite this, comfort is not strictly managed throughout the building lifecycle. This is mainly due to the lack of an appropriate system to adequately manage comfort knowledge through the construction process into operation. Previous proposals to improve knowledge management have not been successfully adopted by the construction industry. To address this, the BabySteps approach was devised. BabySteps is an approach, proposed by this research, which states that for an innovation to be adopted into the industry it must be implementable through a number of small changes. This research proposes that improving the management of comfort knowledge will improve comfort. ComMet is a new methodology proposed by this research that manages comfort knowledge. It enables comfort knowledge to be captured, stored and accessed throughout the building life-cycle and so allowing it to be re-used in future stages of the building project and in future projects. It does this using the following: Comfort Performances – These are simplified numerical representations of the comfort of the indoor environment. Comfort Performances quantify the comfort at each stage of the building life-cycle using standard comfort metrics. Comfort Ratings - These are a means of classifying the comfort conditions of the indoor environment according to an appropriate standard. Comfort Ratings are generated by comparing different Comfort Performances. Comfort Ratings provide additional information relating to the comfort conditions of the indoor environment, which is not readily determined from the individual Comfort Performances. Comfort History – This is a continuous descriptive record of the comfort throughout the project, with a focus on documenting the items and activities, proposed and implemented, which could potentially affect comfort. Each aspect of the Comfort History is linked to the relevant comfort entity it references. These three components create a comprehensive record of the comfort throughout the building lifecycle. They are then stored and made available in a common format in a central location which allows them to be re-used ad infinitum. The LCMS System was developed to implement the ComMet methodology. It uses current and emerging technologies to capture, store and allow easy access to comfort knowledge as specified by ComMet. LCMS is an IT system that is a combination of the following six components: Building Standards; Modelling & Simulation; Physical Measurement through the specially developed Egg-Whisk (Wireless Sensor) Network; Data Manipulation; Information Recording; Knowledge Storage and Access.Results from a test case application of the LCMS system - an existing office room at a research facility - highlighted that while some aspects of comfort were being maintained, the building’s environment was not in compliance with the acceptable levels as stipulated by the relevant building standards. The implementation of ComMet, through LCMS, demonstrates how comfort, typically only considered during early design, can be measured and managed appropriately through systematic application of the methodology as means of ensuring a healthy internal environment in the building.

Response to Comment on "Whole-genome analyses resolve early branches in the tree of life of modern birds".

Mitchell et al. argue that divergence-time estimates for our avian phylogeny were too young because of an "inappropriate" maximum age constraint for the most recent common ancestor of modern birds and that, as a result, most modern bird orders diverged before the Cretaceous-Paleogene mass extinction event 66 million years ago instead of after. However, their interpretations of the fossil record and timetrees are incorrect.

Ambitious mothers – successful daughters: Mothers’ early expectations for children’s education and children’s earnings and sense of control in adult life

Background. Mothers' expectations for their children's educational attainment are related to children's educational and occupational attainment. Studies have yet to establish, however, the long-term links between maternal expectations and offspring earnings, which are not always related to occupational attainment especially in women, or between maternal expectations and offspring sense of control and self-efficacy, which are pivotal factors in career choice and development. Aims. To explore the role of mothers' expectations for their children's educational attainment in children's earnings attainment and sense of control later in life. Method. Data from sweeps of the 1970 British Cohort Study (BCS70) were used. The study sample was those cohort members with complete information on all the variables of interest. The study sample (N = 3,285) was more educated and less disadvantaged than the whole sample. If cohort members of this type are more likely to have a mother who has high expectations, then our results are biased downwards, which suggests that we underestimate the effect of expectations on our two outcome variables. Results. Mothers' expectations at the age of 10 were positively related to daughters' sense of control at the age of 30 even after controlling for ethnicity, educational attainment, and concurrent partner, parent, and labour market participation status, as well as the following confounding variables (measured at the ages of 0–10): general ability and general ability squared, locus of control, emotional and behavioural problems and emotional and behavioural problems squared, socio-economic disadvantage, parental social class, parental family structure, and mothers' education, child-rearing attitudes, and mental health. Mothers' expectations had no effect on sons' adult outcomes. Conclusions. Given that women are particularly at risk for poor psychological and economic outcomes in adulthood, and that this study likely underestimated the effect of expectations on these two outcomes, this is an important conclusion.