Efeitos de práticas de descompactação do solo em área sob sistema plantio direto

Soil compaction is one of the limiting factors in areas subjected to direct seeding. The method used to break up the compacted layer should disturb the soil as little as possible, as well as maintain the ground cover. The aim of this study was to evaluate the influence of subsoiling, scarification and use of shaft-type furrowing mechanisms when sowing, on preserving the ground cover, water content and soil density, as well as the effects on maize yield in a dystroferic Red Nitosol, cultivated under a system of direct seeding for ten years. The experimental design was of randomised blocks, with eight soil management treatments: subsoiling to a depth of 0.40 m before sowing the winter crop, subsoiling to 0.40 m before sowing the maize, scarification to 0.30 m before the winter crop, scarification to 0.30 m before the maize, scarification to 0.20 m before the winter crop, scarification to 0.20 m before the maize, direct seeding of the maize with a shaft-type furrowing mechanism and direct seeding of the maize using a double disc furrower. There were four replications. Subsoiling and scarification influenced the preservation of the ground cover, soil density and water content immediately after sowing, but did not interfere in plant development or grain yield in the maize crop. The use of shaft-type furrowing mechanisms in the sowing operation had no effect on any of the parameters under study.

Prediction of soil shear strength in agricultural and natural environments of the Brazilian Cerrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Capacidade de suporte de carga de Latossolo Vermelho cultivado com cana-de-açúcar e efeitos da mecanização no solo

The objective of this work was to determine the load support capacity (LSC) of an Oxisol and, through compressibility models, relate it to wheel-soil interactions under management systems with one and three sugarcane crop cycles, with mechanized harvest. LSC evaluations were carried out on undisturbed soil samples, collected at planting row and bed, in four layers: 0.00-0.10, 0.10-0.20, 0.20-0.30, and 0.300.40 m. The contact area between wheels and soil was determined in order to estimate the contact pressure by agricultural machinery on the soil. Pre-consolidation pressures were used to determine LSC. The system with three cycles showed higher LSC than the system with only one cycle. The load support capacity of the soil evaluated in the range of friability is greater than the contact pressures applied to the soil by the wheels of the studied agricultural machines.

Produção de chapas de partículas com resíduos de madeira Cordia goeldiana

The aim of this research consisted in the use of wastes from tropical wood (Cordia goeldiana) with low density and the polyurethane resin (mono and bicomponent) castor oil based in the manufacture of particleboards, generating subsidies as application in rural and civil construction, as well in the furniture industry. The particleboards were manufactured with 15% of polyurethane resin content (one part of pre-polymer and one part of polyol), compaction pressure of 4MPa, pressing temperature of 90 degrees C and press time of 7 minutes. The physical and mechanical properties investigated were density, moisture content, strength modulus in bending and internal bond, both obtained according to the recommendations of the Brazilian standard ABNT NBR 14810:2002. The mean values obtained for these properties were systematically superior to the Brazilian standard requirement. This point showed that it is possible the use of Cordia goeldiana wastes in the particleboard production. We confirmed the hypothesis of a significant linear relation between density and the internal bond of the panels, allowing the estimation of the internal bond of particleboards.

Modelo deposicional de carbonatos albianos da Formação Quissamã: análise faciológica, diagenética e estratigráfica de um campo de óleo na porção meridional da Bacia de Campos

Pós-graduação em Geologia Regional - IGCE

Expressão gênica de TLR-2, TLR-4, HMGB1 E VEGF em úlceras abomasais em bovinos de corte

Pós-graduação em Ciência Animal - FMVA

Development of bovine abomasum in prenatal period

For this purpose, samples of Nelore fetus abomasum (Bos taurus indicus) were classified into five groups: 1 – fetuses with 9 to 15 weeks (8 to 21 cm) of gestation, 2 – fetuses with 16 to 22 weeks (23 to 37 cm), 3 – fetuses at 23 to 29 weeks (40 to 58 cm) 4 – fetuses with 30 to 36 weeks (61 to 77 cm) and 5 – fetuses with 37 to 43 weeks (79 to 88 cm). Histologic sections were stained with Hematoxylin and eosin, picrosirius and Mallory’s trichrome methods and examined under light microscopy. In fetus with 11 cm of length showed deep mucosa, wide folds and villi lined by single cylindrical epithelium, lamina propria, submucosa, muscular sublayers and serosa. Fetus with 13.5 cm, villi were evident and muscular layer of the mucosa was formed. At 16.5 cm, could be seen an increase in mucosa glands size and number. In fetus of 26 cm, showed gastric mucous glands at great number and ramifications. At 29 cm large folds, were observed. At 37 cm, showed glandular epithelium, muscular layer of the mucosa and muscular layer well development. Fetus with 42 cm, showed deep glands with corresponding mucous cells surrounding by thin lamina propria. It was concluded that the histomorphometric values of muscular layer and total abomasum wall were increased for all groups except for groups 4 and 5 which there was a decline of values, without presenting a significant difference and there was no continuous pattern of growth for other components of abomasum wall.

Quantificação de citocinas no conteúdo abomasal de bovinos de corte na presença ou ausência de ulceração gástrica

Pós-graduação em Ciência Animal - FMVA

Avaliação clínico-laboratorial e da expressão de metaloproteinases 2 e 9 de equinos com obstrução experimental do cólon menor

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de resistência anti-helmíntica ao monepantel em propriedades de ovinos de uma microrregião em torno de Jaboticabal-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Greenhouse gas emissions and N2o mitigation in beef cattle production on tropical pasture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impactos do manejo de um sistema plantio direto no crescimento e produtividade do arroz de terras altas e feijão de inverno em sucessão e nos atributos do solo

Pós-graduação em Agronomia - FEIS

Qualidade estrutural em latossolos compactados cultivados com milho

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Influência dos espaçamentos de plantio da cultura de cana-de-açúcar (Saccharum spp) nos atributos físico-hídricos do solo

The evolution of sugar cane mechanized harvesting made the sector to question the current row spacing used due to its influence on soil compaction. The aim of this study was to evaluate the soil hydro-physical attributes in two row spacings after the farm machinery traffic. The treatments were conducted in a randomized block design with twelve repetitions, being subjected to the variance analyze in double factorial arrangement. The bulk density, the gravimetric water content, and the soil cone index along the position of crop lines (LC) and 0,1m from the row (LP) at the range of depth of 0 to 0.2m and 0.2 to 0.4m were assessed in both row spacings after the fourth harvest season. The results showed that the row spacings of 1.4 and 1.5m did not affect the values of bulk density and gravimetric water content of the soil in all ranges of depth and sample positions studied. However, in the depth range of 0.2 to 0.4 m, the values of soil cone index (IC) in the row spacing of 1.5 m were higher than the values in row spacing of 1.4 m, at both sampling positions. Regardless of row spacing and sample position, the values of soil cone index in the depth range of 0.2 to 0.4m were higher than the depth range of 0 to 0.2m.

Métodos de determinação da densidade do solo em diferentes sistemas de manejo

Soil bulk density is an attribute often used to characterize soil physical structure, being an indicator of soil compaction. The objective of this study was to compare the values ​​of bulk density measured by the paraffin sealed clod and volumetric ring methods in conventional, no-tillage and minimum tillage systems on a Dystroferric Red Nitosol, clayey, in Botucatu, SP. The experiment design was a 3x2 factorial arrangement in randomized block with four replications. The density values ​​obtained by the paraffin sealed clod method were statistically higher than those obtained by the volumetric ring method. There was no difference between the managements when comparing the values ​​of soil density obtained by the paraffin sealed clod method. The soil under conventional management showed lower density when comparing the values ​​of soil density obtained by the volumetric ring. The volumetric ring method was more sensitive to show differences between the management systems than the paraffin sealed clod method.