Supported metal nanoparticles for sustainable green catalytic processes

Preformed Au nanoparticles supported on activated carbon and TiO2 were synthesised by sol-immobilisation. Polyethylene glycol, polyvinyl pyrrolidone and polyvinyl alcohol were used as stabilisers for the gold nanoparticles at different polymer/Au wt/wt ratios for each polymer. The effect of polymer/Au wt/wt ratios was investigated on (i) the average nanoparticle size, (ii) catalytic activity for two reactions, 4-nitrophenol reduction and glucose oxidation to glucaric acid. 4-nitrophenol reduction is recognised as a model reaction for nanomaterial catalytic activity tests; glucose oxidation to glucaric acid is a reaction that is traditionally carried out with concentrated nitric acid, for which alternative reaction pathways are looked for in an effort to reduce its environmental impact. The catalysts were characterised from the nanoparticle synthesis by colloidal method by means of UV-vis spectroscopy and DLS analysis, to the immobilisation step by XRD and TEM. The effect of the polymer:Au wt/wt ratio on nanoparticle size depends on the polymer nature, and point out the need to optimise supported nanoparticle synthesis protocols in the future depending on the type of stabiliser. The catalytic tests revealed that the polymers interact with Au nanoparticles through different active sites. Activated carbon (AC) and TiO2 were compared as supports for Au nanoparticles stabilised by PVA at PVA/Au 0,65 wt/wt. AC-supported Au NPs were the most active for glucose oxidation while TiO2-stabilised Au NPs were five times more active in 4-nitrophenol reduction that AC-supported NPs. Hence support and stabiliser are important parameters that should be optimised in order to achieve high catalytic activity for a given reaction.

Sviluppo di materiali compositi a base di Aquivion® PFSA per la valorizzazione catalitica del furfuril alcol

L'elaborato di tesi si è posto l'obiettivo di studiare la sintesi e l'attività catalitica di diversi materiali compositi a base di Aquivion, resina pefluorosolfonica dalle caratteristiche superacide, e vari ossidi su una reazione di valorizzazione catalitica del furfuril alcol. I test catalitici sono stati inizialmente svolti allo scopo di determinare l'influenza delle caratteristiche del catalizzatore e delle condizioni operative. La comparazione dei risultati ottenuti ha successivamente permesso di trarre ulteriori informazioni interessanti sul meccanismo di reazione. In particolare, le proprietà superficiali degli ossidi indagati hanno giocato un ruolo determinante per la generazione di acqua a partire dal solvente alcolico, acqua che è risultata fondamentale per alcuni step della reazione.

Catalytic reduction of organic pollutants using supported metal nanoparticles

Metal nanoparticle catalysts have in the last decades been extensively researched for their enhanced performance compared to their bulk counterpart. Properties of nanoparticles can be controlled by modifying their size and shape as well as adding a support and stabilizing agent. In this study, preformed colloidal gold nanoparticles supported on activated carbon were tested on the reduction of 4-nitrophenol by NaBH4, a model reaction for evaluating catalytic activity of metal nanoparticles and one with high significance in the remediation of industrial wastewaters. Methods of wastewater remediation are reviewed, with case studies from literature on two major reactions, ozonation and reduction, displaying the synergistic effects observed with bimetallic and trimetallic catalysts, as well as the effects of differences in metal and support. Several methods of preparation of nanoparticles are discussed, in particular, the sol immobilization technique, which was used to prepare the supported nanoparticles in this study. Different characterization techniques used in this study to evaluate the materials and spectroscopic techniques to analyze catalytic activities of the catalyst are reviewed: ultraviolet-visible (UV-Vis) spectroscopy, dynamic light scattering (DLS) analysis, X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM) imaging. Optimization of catalytic parameters was carried out through modifications in the reaction setup. The effects of the molar ratio of reactants, stirring, type and amount of stabilizing agent are explored. Another important factor of an effective catalyst is its reusability and long-term stability, which was examined with suggestions for further studies. Lastly, a biochar support was newly tested for its potential as a replacement for activated carbon.

Synthesis and catalytic activity of new cu-based catalytic systems for the enhanced electrochemical CO2 reduction

This Ph.D. thesis concerns the synthesis of nanostructured Cu-containing materials to be used as electrode modifiers for the CO2 electroreduction in aqueous phase and the evaluation of their catalytic performances. Inspired by the fascinating concept of the artificial photosynthesis-oriented systems, several catalytic layers were electrochemically loaded on carbonaceous gas diffusion membranes, i.e., 3D structures that allow the design of eco-friendly materials for applications in green carbon recycling processes. In particular, early studies on Cu(I-II)-Cu(0) nanostructured materials were carried out to produce films on 4 cm2 sized supports by means of a fast and low-cost electrochemical procedure. Besides, through a screening of potentials, it was possible to find out a selective value for the CH3COOH production at -0.4 V vs RHE with a maximum productivity (1h reaction), ensured by the presence of the Cu+/Cu0 active redox couple (0.31 mmol gcat-1 h-1). On the basis of these results, further optimisations of the electrocatalyst chemical composition were carried out with the aim of (i) facilitating the interaction with CO2, (ii) increasing the dispersion of the catalytic active phase, and (iii) enhancing the CH3COOH productivity. To this aim, novel electrocatalysts based on layered double hydroxides (LDHs) were optimised, having as a final goal the formation of a new Cu2O-Cu0 based electrocatalyst derived from electrochemically achieved CuMgAl LDHs, subjected to calcination and reduction processes. The as-obtained electrocatalysts were tested for the selective production of CH3COOH and unprecedented results were obtained with the pristine CuMgAl LDH (2.0 mmol gcat-1 h-1). Additional characterisations of such an electrocatalyst have highlighted the possibility to achieve a ternary LDH in intimate contact with Cu2O-Cu0 species starting from the electrochemical deposition. The presence of these species, along with an alkaline environment on the electrode surface, were essential to preserve the selectivity towards the desired product, as confirmed by further operando studies.

The bright routes to five-membered heterocycles: a photoredox catalytic approach

Synthetic chemists constantly strive to develop new methodologies to access complex molecules more sustainably. The recently developed photocatalytic approach results in a valid and greener alternative to the classical synthetic methods. Here we present three protocols to furnish five-membered rings exploiting photoredox catalysis. We firstly obtained 4,5-dihydrofurans (4,5-DHFs) from readily available olefins and α-haloketones employing fac-Ir(ppy)3 as a photocatalyst under blue-light irradiation (Figure 1, top). This transformation resulted very broad in scope, thanks to its mild conditions and the avoidance of stoichiometric amounts of oxidants or reductants. Moreover, similar conditions could lead to β,γ-unsaturated ketones, or highly substituted tetrahydrofurans (THFs) by carefully differentiating the substitution pattern on the starting materials and properly adjusting the reaction parameters. We then turned our attention to the reactivity of allenamides employing analogous photocatalytic conditions to access 2-aminofurans (Figure 1, bottom). α-Haloketones again provided the radical generated by fac-Ir(ppy)3 under visible-light irradiation, which added to the π-system and furnished the cyclic molecule. The addition of a second molecule of the α-haloketone moiety led to the formation of the final highly functionalized furan, which might be further elaborated to afford more complex products. The two works were both supplied with mechanistic investigations supported by experimental and computational methods. As our last project, we developed a methodology to achieve cypentanonyl-fused N-methylpyrrolidines (Figure 2), exploiting N,N-dimethylamines and carboxylic acids as radical sources. In two separated photocatalytic steps, both functionalities are manipulated through the photoredox catalysis by 4CzIPN to add to an α,β-enone system, furnishing the bicyclic product.

New catalytic strategies for the manipulation of arenes

The aim of this Doctoral Thesis is the development of new catalytic synthetic methodologies in the context of the modern organic chemistry setting, with special focus on the use of cheap, sustainable catalytic materials. Specifically, during the course my PhD, I focused my research on two main distinct catalytic strategies, namely: the use of carbonaceous materials as catalysts (carbocatalysis) and nickel catalysis, also investigating a synergistic combination of the two. These methodologies were explored as means for the manipulation of (hetero)aromatic cores, representing ubiquitous, easily accessible and privileged scaffolds in medicinal or natural products chemistry. Both polar and radical reaction manifolds were engaged as complementary reactivities, capitalizing on metal- as well as organo-based activation modes. Particular attention has been devoted to addressing modern synthetic challenges or highly sought- after methodologies. Specifically, protocols for direct substitution of alcohols, dearomatization of arene nuclei, formation of C-S bonds, carbon dioxide fixation, C-C bond activation and fluoroalkylation were successfully achieved under carbo- or nickel catalyzed conditions.

Studio della reazione di hydrogen-transfer di metil levulinato con etanolo in fase vapore: effetto del palladio supportato su catalizzatori contenenti zirconio

La valorizzazione di biomasse lignocellulosiche rappresenta la strada che la chimica può percorrere per svincolarsi dalle fonti fossili e virare verso un futuro incentrato sulla sostenibilità ambientale. In quest’ottica, l’acido levulinico (AL) e i suoi esteri, detti alchil levulinati, ottenibili dalla valorizzazione di biomasse di scarto, rappresentano una classe di composti di grande interesse industriale. Infatti, dalla loro riduzione è possibile ottenere g-valerolattone (GVL), un’importante molecola piattaforma per l’industria chimica, o alchil valerati, composti interessanti per diverse branche dell’industria chimica e per la formulazione di bio-carburanti. Già da tempo è nota la possibilità di effettuare la riduzione di AL in fase liquida in presenza di alcoli come H-Donor secondo un meccanismo detto Catalytic Transfer Hydrogenation che può essere promosso da ossido di zirconio (ZrO2). Recentemente, è stato ottimizzato un processo che impiega i reagenti appena citati in un reattore continuo operante in fase gassosa con ZrO2 come catalizzatore. In questo lavoro, si è dopato tale sistema catalitico con palladio, al fine di promuovere le reazioni di riduzione consecutiva al GVL e si sono ottimizzati i parametri operativi come tempo di contatto, temperatura e rapporto tra substrato e H-Donor.

Studio di ossidi misti Ti/Zr/O per la valorizzazione catalitica di furfurale a GVL in un reattore continuo in fase liquida

Il cambiamento climatico è una delle sfide più ardue che il nostro pianeta abbia mai dovuto affrontare. Negli ultimi anni si sta rendendo sempre più evidente la necessità di un profondo cambiamento ideologico e sociale in ogni campo. La Green Chemistry mira a capeggiare questo cambiamento proponendo dei principi guida in modo da indirizzare la chimica verso tale traguardo. Possibili strumenti attuativi di questa visione sono senza alcun dubbio le bioraffinerie. Raffinerie appunto, nate però per processare materie prime provenienti da fonti rinnovabili, le biomasse. Esistono diversi tipi di biomasse, dalle quali possono essere ricavate differenti molecole piattaforma. La biomassa lignocellulosica, per esempio, viene sfruttata per ottenere perlopiù composti furanici. Tra questi di particolare interesse è la furfurale(FUR), un’aldeide particolarmente reattiva dalla quale possono essere ottenute numerose sostanze chimiche ad alto valore aggiunto. Tra queste si trova il γ-valerolattone(GVL), estere ciclico a cinque atomi di carbonio, promettente prodotto preliminare nella sintesi di combustibili a base biologica e prodotti chimici di base. Il processo che porta dalla FUR al GVL comprende diversi step di reazione, alcuni catalizzati da acidità di Lewis, altri da acidità di Brønsted. Gli step di riduzione possono essere eseguiti mediante una reazione di Catalytic Transfer Hydrogenation (CTH) utilizzando isopropanolo piuttosto che H2 gassoso. La scelta del solvente/riducente assieme all’utilizzo di un sistema catalitico eterogeneo permettono la realizzazione della reazione con un basso impatto ambientale. Per quanto riguarda la scelta del sistema catalitico, particolarmente interessante è la combinazione TiO2-ZrO2. Lo scopo di questa tesi è stato quello di sintetizzare e valutare le performance di sistemi catalitici a base di ossidi misti Ti/Zr/O con diverse composizioni nella conversione della FUR a GVL in un reattore in fase liquida.

Carbon Nanoparticles For Gene Transfection In Eukaryotic Cell Lines.

For the first time, oxygen terminated cellulose carbon nanoparticles (CCN) was synthesised and applied in gene transfection of pIRES plasmid. The CCN was prepared from catalytic of polyaniline by chemical vapour deposition techniques. This plasmid contains one gene that encodes the green fluorescent protein (GFP) in eukaryotic cells, making them fluorescent. This new nanomaterial and pIRES plasmid formed π-stacking when dispersed in water by magnetic stirring. The frequencies shift in zeta potential confirmed the plasmid strongly connects to the nanomaterial. In vitro tests found that this conjugation was phagocytised by NG97, NIH-3T3 and A549 cell lines making them fluorescent, which was visualised by fluorescent microscopy. Before the transfection test, we studied CCN in cell viability. Both MTT and Neutral Red uptake tests were carried out using NG97, NIH-3T3 and A549 cell lines. Further, we use metabolomics to verify if small amounts of nanomaterial would be enough to cause some cellular damage in NG97 cells. We showed two mechanisms of action by CCN-DNA complex, producing an exogenous protein by the transfected cell and metabolomic changes that contributed by better understanding of glioblastoma, being the major finding of this work. Our results suggested that this nanomaterial has great potential as a gene carrier agent in non-viral based therapy, with low cytotoxicity, good transfection efficiency, and low cell damage in small amounts of nanomaterials in metabolomic tests.

Electronic And Structural Study Of Pt-modified Au Vicinal Surfaces: A Model System For Pt-au Catalysts.

Two single crystalline surfaces of Au vicinal to the (111) plane were modified with Pt and studied using scanning tunneling microscopy (STM) and X-ray photoemission spectroscopy (XPS) in ultra-high vacuum environment. The vicinal surfaces studied are Au(332) and Au(887) and different Pt coverage (θPt) were deposited on each surface. From STM images we determine that Pt deposits on both surfaces as nanoislands with heights ranging from 1 ML to 3 ML depending on θPt. On both surfaces the early growth of Pt ad-islands occurs at the lower part of the step edge, with Pt ad-atoms being incorporated into the steps in some cases. XPS results indicate that partial alloying of Pt occurs at the interface at room temperature and at all coverage, as suggested by the negative chemical shift of Pt 4f core line, indicating an upward shift of the d-band center of the alloyed Pt. Also, the existence of a segregated Pt phase especially at higher coverage is detected by XPS. Sample annealing indicates that the temperature rise promotes a further incorporation of Pt atoms into the Au substrate as supported by STM and XPS results. Additionally, the catalytic activity of different PtAu systems reported in the literature for some electrochemical reactions is discussed considering our findings.

Chemo-, Regio- And Stereoselective Heck Arylation Of Allylated Malonates: Mechanistic Insights By Esi-ms And Synthetic Application Toward 5-arylmethyl-γ-lactones.

We describe herein a general method for the controlled Heck arylation of allylated malonates. Both electron-rich and electron-poor aryldiazonium salts were readily employed as the aryl-transfer agents in good yields and in high chemo-, regio-, and stereoselectivity without formation of decarboxylated byproducts. Reaction monitoring via ESI-MS was used to support the formation of chelated Pd species through the catalytic cycle. Additionally, some Heck adducts were successfully used in the total synthesis of pharmacologically active γ-lactones.

Phtx-ii A Basic Myotoxic Phospholipase A2 From Porthidium Hyoprora Snake Venom, Pharmacological Characterization And Amino Acid Sequence By Mass Spectrometry.

A monomeric basic PLA2 (PhTX-II) of 14149.08 Da molecular weight was purified to homogeneity from Porthidium hyoprora venom. Amino acid sequence by in tandem mass spectrometry revealed that PhTX-II belongs to Asp49 PLA2 enzyme class and displays conserved domains as the catalytic network, Ca2+-binding loop and the hydrophobic channel of access to the catalytic site, reflected in the high catalytic activity displayed by the enzyme. Moreover, PhTX-II PLA2 showed an allosteric behavior and its enzymatic activity was dependent on Ca2+. Examination of PhTX-II PLA2 by CD spectroscopy indicated a high content of alpha-helical structures, similar to the known structure of secreted phospholipase IIA group suggesting a similar folding. PhTX-II PLA2 causes neuromuscular blockade in avian neuromuscular preparations with a significant direct action on skeletal muscle function, as well as, induced local edema and myotoxicity, in mice. The treatment of PhTX-II by BPB resulted in complete loss of their catalytic activity that was accompanied by loss of their edematogenic effect. On the other hand, enzymatic activity of PhTX-II contributes to this neuromuscular blockade and local myotoxicity is dependent not only on enzymatic activity. These results show that PhTX-II is a myotoxic Asp49 PLA2 that contributes with toxic actions caused by P. hyoprora venom.

Activation Of The Low Molecular Weight Protein Tyrosine Phosphatase In Keratinocytes Exposed To Hyperosmotic Stress.

Herein, we provide new contribution to the mechanisms involved in keratinocytes response to hyperosmotic shock showing, for the first time, the participation of Low Molecular Weight Protein Tyrosine Phosphatase (LMWPTP) activity in this event. We reported that sorbitol-induced osmotic stress mediates alterations in the phosphorylation of pivotal cytoskeletal proteins, particularly Src and cofilin. Furthermore, an increase in the expression of the phosphorylated form of LMWPTP, which was followed by an augment in its catalytic activity, was observed. Of particular importance, these responses occurred in an intracellular milieu characterized by elevated levels of reduced glutathione (GSH) and increased expression of the antioxidant enzymes glutathione peroxidase and glutathione reductase. Altogether, our results suggest that hyperosmostic stress provides a favorable cellular environment to the activation of LMWPTP, which is associated with increased expression of antioxidant enzymes, high levels of GSH and inhibition of Src kinase. Finally, the real contribution of LMWPTP in the hyperosmotic stress response of keratinocytes was demonstrated through analysis of the effects of ACP1 gene knockdown in stressed and non-stressed cells. LMWPTP knockdown attenuates the effects of sorbitol induced-stress in HaCaT cells, mainly in the status of Src kinase, Rac and STAT5 phosphorylation and activity. These results describe for the first time the participation of LMWPTP in the dynamics of cytoskeleton rearrangement during exposure of human keratinocytes to hyperosmotic shock, which may contribute to cell death.