The evaluation of CloudSat and CALIPSO ice microphysical products using ground-based cloud radar and lidar observations

In this paper, the statistical properties of tropical ice clouds (ice water content, visible extinction, effective radius, and total number concentration) derived from 3 yr of ground-based radar–lidar retrievals from the U.S. Department of Energy Atmospheric Radiation Measurement Climate Research Facility in Darwin, Australia, are compared with the same properties derived using the official CloudSat microphysical retrieval methods and from a simpler statistical method using radar reflectivity and air temperature. It is shown that the two official CloudSat microphysical products (2B-CWC-RO and 2B-CWC-RVOD) are statistically virtually identical. The comparison with the ground-based radar–lidar retrievals shows that all satellite methods produce ice water contents and extinctions in a much narrower range than the ground-based method and overestimate the mean vertical profiles of microphysical parameters below 10-km height by over a factor of 2. Better agreements are obtained above 10-km height. Ways to improve these estimates are suggested in this study. Effective radii retrievals from the standard CloudSat algorithms are characterized by a large positive bias of 8–12 μm. A sensitivity test shows that in response to such a bias the cloud longwave forcing is increased from 44.6 to 46.9 W m−2 (implying an error of about 5%), whereas the negative cloud shortwave forcing is increased from −81.6 to −82.8 W m−2. Further analysis reveals that these modest effects (although not insignificant) can be much larger for optically thick clouds. The statistical method using CloudSat reflectivities and air temperature was found to produce inaccurate mean vertical profiles and probability distribution functions of effective radius. This study also shows that the retrieval of the total number concentration needs to be improved in the official CloudSat microphysical methods prior to a quantitative use for the characterization of tropical ice clouds. Finally, the statistical relationship used to produce ice water content from extinction and air temperature obtained by the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite is evaluated for tropical ice clouds. It is suggested that the CALIPSO ice water content retrieval is robust for tropical ice clouds, but that the temperature dependence of the statistical relationship used should be slightly refined to better reproduce the radar–lidar retrievals.

Energy at work: a measurement validation and linkage to unit effectiveness

We introduce the notion that the energy of individuals can manifest as a higher-level, collective construct. To this end, we conducted four independent studies to investigate the viability and importance of the collective energy construct as assessed by a new survey instrument—the productive energy measure (PEM). Study 1 (n = 2208) included exploratory and confirmatory factor analyses to explore the underlying factor structure of PEM. Study 2 (n = 660) cross-validated the same factor structure in an independent sample. In study 3, we administered the PEM to more than 5000 employees from 145 departments located in five countries. Results from measurement invariance, statistical aggregation, convergent, and discriminant-validity assessments offered additional support for the construct validity of PEM. In terms of predictive and incremental validity, the PEM was positively associated with three collective attitudes—units' commitment to goals, the organization, and overall satisfaction. In study 4, we explored the relationship between the productive energy of firms and their overall performance. Using data from 92 firms (n = 5939employees), we found a positive relationship between the PEM (aggregated to the firm level) and the performance of those firms. Copyright © 2011 John Wiley & Sons, Ltd.

Evoked prior learning experience and approach to learning as predictors of academic achievement

Background. In separate studies and research from different perspectives, five factors are found to be among those related to higher quality outcomes of student learning (academic achievement). Those factors are higher self-efficacy, deeper approaches to learning, higher quality teaching, students’ perceptions that their workload is appropriate, and greater learning motivation. University learning improvement strategies have been built on these research results. Aim. To investigate how students’ evoked prior experience, perceptions of their learning environment, and their approaches to learning collectively contribute to academic achievement. This is the first study to investigate motivation and self-efficacy in the same educational context as conceptions of learning, approaches to learning and perceptions of the learning environment. Sample. Undergraduate students (773) from the full range of disciplines were part of a group of over 2,300 students who volunteered to complete a survey of their learning experience. On completing their degrees 6 and 18 months later, their academic achievement was matched with their learning experience survey data. Method. A 77-item questionnaire was used to gather students’ self-report of their evoked prior experience (self-efficacy, learning motivation, and conceptions of learning), perceptions of learning context (teaching quality and appropriate workload), and approaches to learning (deep and surface). Academic achievement was measured using the English honours degree classification system. Analyses were conducted using correlational and multi-variable (structural equation modelling) methods. Results. The results from the correlation methods confirmed those found in numerous earlier studies. The results from the multi-variable analyses indicated that surface approach to learning was the strongest predictor of academic achievement, with self-efficacy and motivation also found to be directly related. In contrast to the correlation results, a deep approach to learning was not related to academic achievement, and teaching quality and conceptions of learning were only indirectly related to achievement. Conclusions. Research aimed at understanding how students experience their learning environment and how that experience relates to the quality of their learning needs to be conducted using a wider range of variables and more sophisticated analytical methods. In this study of one context, some of the relations found in earlier bivariate studies, and on which learning intervention strategies have been built, are not confirmed when more holistic teaching–learning contexts are analysed using multi-variable methods.

The role of self-teaching in learning orthographic and semantic aspects of new words

This study explores how children learn the meaning (semantics) and spelling patterns (orthography) of novel words encountered in story context. English-speaking children (N = 88) aged 7 to 8 years read 8 stories and each story contained 1 novel word repeated 4 times. Semantic cues were provided by the story context such that children could infer the meaning of the word (specific context) or the category that the word belonged to (general context). Following story reading, posttests indicated that children showed reliable semantic and orthographic learning. Decoding was the strongest predictor of orthographic learning, indicating that self-teaching via phonological recoding was important for this aspect of word learning. In contrast, oral vocabulary emerged as the strongest predictor of semantic learning.

Root phenomics of crops: opportunities and challenges

Reliable techniques for screening large numbers of plants for root traits are still being developed, but include aeroponic, hydroponic and agar plate systems. Coupled with digital cameras and image analysis software, these systems permit the rapid measurement of root numbers, length and diameter in moderate ( typically <1000) numbers of plants. Usually such systems are employed with relatively small seedlings, and information is recorded in 2D. Recent developments in X-ray microtomography have facilitated 3D non-invasive measurement of small root systems grown in solid media, allowing angular distributions to be obtained in addition to numbers and length. However, because of the time taken to scan samples, only a small number can be screened (typically<10 per day, not including analysis time of the large spatial datasets generated) and, depending on sample size, limited resolution may mean that fine roots remain unresolved. Although agar plates allow differences between lines and genotypes to be discerned in young seedlings, the rank order may not be the same when the same materials are grown in solid media. For example, root length of dwarfing wheat ( Triticum aestivum L.) lines grown on agar plates was increased by similar to 40% relative to wild-type and semi-dwarfing lines, but in a sandy loam soil under well watered conditions it was decreased by 24-33%. Such differences in ranking suggest that significant soil environment-genotype interactions are occurring. Developments in instruments and software mean that a combination of high-throughput simple screens and more in-depth examination of root-soil interactions is becoming viable.

Mobilising community action towards a low-carbon future: Opportunities and challenges for local government in the UK

Over the last decade the important role that local authorities can play in catalyzing communityaction on climate change has been repeatedly emphasised by the UK Government. The paper examines this policy context and explores the options available to local authorities in terms of reaching and engaging their communities. The type of progressive response shown by some UKlocal authorities is illustrated with empirical evidence gathered through a study conducted in the London Borough of Islington focusing on their recently established ‘Green Living Centre’. The results confirm interest in this major council-led community initiative, with positive attitudes expressed by the majority of those questioned in terms of the advice and information available. However, it is also clear that many participants had preexisting pro-environmental attitudes and behavioural routines. Results from a broader sample of Islington residents indicate a substantial challenge in reaching the wider community, where enthusiasm for sustainability change and interest in this type of scheme were more mixed. The prospect for local government in addressing this challenge – and their ability to trigger and capitalize upon concepts of social change at the community level towardsalowercarbon future – is discussed in the final part of the paper.

Provenance of marbles from Naxos based on microstructural and geochemical characterization

A detailed quantitative microstructural study coupled with cathodoluminescence and geochemical analyses on marbles from Naxos demonstrates that the analysis of microstructures is the most sensitive method to define the origin of marbles within, and between, different regions. Microstructure examination can only be used as an accurate provenance tool if a correction for the second-phase content is considered. If second phases are not considered, a large spread of different microstructures occurs within sample sites, making a separation between neighbouring outcrops difficult or impossible. Moreover, this study shows that the origin of a marble is defined more precisely if the microstructural observations are coupled with cathodoluminescence data.

Mobility based energy efficient and multi-sink algorithms for consumer home networks

With the fast development of the Internet, wireless communications and semiconductor devices, home networking has received significant attention. Consumer products can collect and transmit various types of data in the home environment. Typical consumer sensors are often equipped with tiny, irreplaceable batteries and it therefore of the utmost importance to design energy efficient algorithms to prolong the home network lifetime and reduce devices going to landfill. Sink mobility is an important technique to improve home network performance including energy consumption, lifetime and end-to-end delay. Also, it can largely mitigate the hot spots near the sink node. The selection of optimal moving trajectory for sink node(s) is an NP-hard problem jointly optimizing routing algorithms with the mobile sink moving strategy is a significant and challenging research issue. The influence of multiple static sink nodes on energy consumption under different scale networks is first studied and an Energy-efficient Multi-sink Clustering Algorithm (EMCA) is proposed and tested. Then, the influence of mobile sink velocity, position and number on network performance is studied and a Mobile-sink based Energy-efficient Clustering Algorithm (MECA) is proposed. Simulation results validate the performance of the proposed two algorithms which can be deployed in a consumer home network environment.

BIM: innovation in design management, influence and challenges of implementation

The construction industry is widely being criticised as a fragmented industry. There are mounting calls for the industry to change. The espoused change calls for collaboration as well as embracing innovation in the process of design, construction and across the supply chain. Innovation and the application of emerging technologies are seen as enablers for integrating the processes ‘integrating the team’ such as building information modelling (BIM). A questionnaire survey was conducted to ascertain change in construction with regard to design management, innovation and the application of BIM as cutting edge pathways for collaboration. The respondents to the survey were from an array of designations across the construction industry such as construction managers, designers, engineers, design coordinators, design managers, architects, architectural technologists and surveyors. There was a general agreement by most respondents that the design team was responsible for design management in their organisation. There is a perception that the design manager and the client are the catalyst for advancing innovation. The current state of industry in terms of incorporating BIM technologies is posing a challenge as well as providing an opportunity for accomplishment. BIM technologies provide a new paradigm shift in the way buildings are designed, constructed and maintained. This paradigm shift calls for rethinking the curriculum for educating building professionals, collectively.

The cyber challenge: a robotics project to enthuse

Robotics is a key theme in many of the degrees offered in Systems Engineering. The topic has proved useful in attracting students to the University, and it also provides the basis of much practical and project work throughout the degrees. This paper focuses on one aspect, a Part 2 project in which students doing various degrees work together to develop a mobile robot which is controlled remotely to navigate an environment and perform specific tasks. In addition to providing practical experience of relevant academic topics, this project helps to contribute to key teaching and learning priorities including problem based learning, motivation and important employability skills.

A novel ensemble method for retrieving properties of warm cloud in 3-D using ground-based scanning radar and zenith radiances

We present a novel method for retrieving high-resolution, three-dimensional (3-D) nonprecipitating cloud fields in both overcast and broken-cloud situations. The method uses scanning cloud radar and multiwavelength zenith radiances to obtain gridded 3-D liquid water content (LWC) and effective radius (re) and 2-D column mean droplet number concentration (Nd). By using an adaption of the ensemble Kalman filter, radiances are used to constrain the optical properties of the clouds using a forward model that employs full 3-D radiative transfer while also providing full error statistics given the uncertainty in the observations. To evaluate the new method, we first perform retrievals using synthetic measurements from a challenging cumulus cloud field produced by a large-eddy simulation snapshot. Uncertainty due to measurement error in overhead clouds is estimated at 20% in LWC and 6% in re, but the true error can be greater due to uncertainties in the assumed droplet size distribution and radiative transfer. Over the entire domain, LWC and re are retrieved with average error 0.05–0.08 g m-3 and ~2 μm, respectively, depending on the number of radiance channels used. The method is then evaluated using real data from the Atmospheric Radiation Measurement program Mobile Facility at the Azores. Two case studies are considered, one stratocumulus and one cumulus. Where available, the liquid water path retrieved directly above the observation site was found to be in good agreement with independent values obtained from microwave radiometer measurements, with an error of 20 g m-2.