Root canal filling: fracture strength of fiber-reinforced composite-restored roots and finite element analysis

The aims of this study were to evaluate the effect of root canal filling techniques on root fracture resistance and to analyze, by finite element analysis (FEA), the expansion of the endodontic sealer in two different root canal techniques. Thirty single-rooted human teeth were instrumented with rotary files to a standardized working length of 14 mm. The specimens were embedded in acrylic resin using plastic cylinders as molds, and allocated into 3 groups (n=10): G(lateral) - lateral condensation; G(single-cone) - single cone; G(tagger) - Tagger's hybrid technique. The root canals were prepared to a length of 11 mm with the #3 preparation bur of a tapered glass fiber-reinforced composite post system. All roots received glass fiber posts, which were adhesively cemented and a composite resin core was built. All groups were subjected to a fracture strength test (1 mm/min, 45°). Data were analyzed statistically by one-way ANOVA with a significance level of 5%. FEA was performed using two models: one simulated lateral condensation and Tagger's hybrid technique, and the other one simulated the single-cone technique. The second model was designed with an amount of gutta-percha two times smaller and a sealer layer two times thicker than the first model. The results were analyzed using von Mises stress criteria. One-way ANOVA indicated that the root canal filling technique affected the fracture strength (p=0.004). The G(lateral) and G(tagger) produced similar fracture strength values, while G(single-cone) showed the lowest values. The FEA showed that the single-cone model generated higher stress in the root canal walls. Sealer thickness seems to influence the fracture strength of restored endodontically treated teeth.

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Comportamento do esmalte de dentes decíduos após desafio desmineralizante em função de materiais restauradores: estudo ao microscópio de luz polarizada

Pós-graduação em Biopatologia Bucal - ICT

Utilização de bacteriófagos ambientais no controle de biofilmes de Salmonella spp. em superfícies utilizadas na indústria de processamento e comercialização de frango de corte e derivados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do selamento de ápices radiculares retrobturados ou recobertos com diferentes materiais mediante infiltração marginal por corante e análise da interface em microscopia eletrônica de varredura

The purpose of this study was to evaluate the apical sealing ability and the marginal adaptation of five dental materials used in retrofillings or applied to the bevelled root surface. One hundred and forty extracted single rooted human teeth were used, divided into seven groups of twenty each. ln the first, second, third and fourth groups, the teeth were apicoectomized, submitted to cavity preparations and retrofilled with one of the following materiais: zinc free silver amalgam, a dentin bonding system plus composite resin, a glass ionomer cement ora compomer. In the fifth, sixth and seventh groups, the teeth were apicoectomized and capped on the bevelled root surface with one of the following materiais: a dentin bonding system plus composite resin, a glass ionomer cement or a compomer. Two specimens of each experimental group were evaluated for the marginal adaptation using scanning electron microscopy. The remaining 126 specimens were immersed in 2% methylene blue dye, stored for one week at 37ºC and the infiltration was evaluated with a stereomicroscope. The results showed that the glass ionomer cement presented the lowest values of marginal infiltration when used as retrofilling material, with a significant statistical difference when compared with the others tested materials. When used as apical capping, the glass ionomer cement and the compomer were equivalent and significantly better than the dentin bonding system plus composite resin. Using scanning electron microscopy, all the materials showed some slight adjustment problem. ln the retrofilling, the smallest marginal gaps were observed with the compomer and the dentin bonding system plus composite resin, while the largest were observed with the glass ionomer cement and zinc free silver amalgam. ln the apical capping, the smallest marginal gaps were observed with the compomer and the dentin bonding system plus composite resin and ...

Veríssimo passando Érico a limpo: espelhos e biblioteca em Solo de clarineta

Pós-graduação em Letras - FCLAS

Criação de contexto favorável ao compartilhamento do conhecimento operário: pesquisa no ambiente vidreiro

In search for better competitiveness, the automotive industry has discussed and applied several concepts related to people and processes. However, in many organizations, the adopted concepts are implemented and kept unarticulated. In this context, authors recognize the role of the knowledge as competitive advantage, but it is still dealt in an implicit way with the traditional models of Production Management. Exploring opportunities in this scenario, this Thesis aims to analyse worker knowledge sharing using factors of Knowledge Management, Work Organization and Production Organization. For the realization of the present Thesis, the scope of the research was restricted to be the labour environment of the glass plants shop floor. The choice of the glass sector is justified due to high dependency on the tacit knowledge of blue-collars. The research uses a qualitative-quantitative approach and employs interviews with workers and managers to identify factors. To assess the importance of these factors in the management judgments, is employed the technique Incomplete Pairwise Comparisons based on Analytic Hierarchy Process Saaty (2001). The result indicates integration among factors and highlights the importance of systematic and technical conversation among operators to share better your knowledge. Also, worker knowledge sharing is improved using communication, training and work instruction. This research extends the conceptual frameworks encountered in literature from the factors integration of Knowledge Management with the Organization of Work and the Production and makes explicit use of the theme of knowledge. This contributes to promote of a favourable context for the creation and sharing of knowledge, among the people in the labour environment, and to support incremental innovation

Preparação e caracterização de óxido de alumínio anodizado sobre substratos transparentes

Pós-graduação em Ciência e Tecnologia de Materiais - FC

De um subproduto industrial para um produto destinado à alimentação animal: produção de biomassa bacteriana

A grande diversidade das atividades industriais ocasiona durante o processo produtivo a geração de resíduos sólidos, líquidos e gasosos, que podem poluir e/ou contaminar o solo, a água e o ar. Embora existam regulamentos para o descarte desses resíduos, a inobservância às regras, a ineficiência dos tratamentos despoluentes e a inoperância de órgãos fiscalizadores permitem que, ainda hoje, sejam lançados ao ambiente grandes cargas de poluentes. Isso se aplica às indústrias de alimentos de origem animal. Felizmente, a visão dos empresários do setor vem mudando, na medida em que a imagem de uma empresa que conta com produtos e processos ambientalmente responsáveis representa parte das estratégias competitivas atuais. O objetivo deste trabalho foi demonstrar como um efluente industrial pode ser transformado em matéria prima para a obtenção de um produto com valor comercial, utilizando tecnologias reconhecidas pela indústria e a atividade microbiana. O efluente foi obtido em indústria de abate e processamento de tilápias, apresentado (valores médios) pH = 9,4, DQO = 1.127 mg/L, óleos e graxas = 1.166 mg/L, nitrogênio total = 813 mg/L, coliformes a 30–35o C = 1,0x105 NMP/mL, coliformes a 45o C = 0,41 NMP/mL, bolores e leveduras = 4,6x103 UFC/mL e, ocasionalmente, contendo Salmonella sp e Aeromonas sp. Os tratamentos físicos aplicados ao efluente incluíram gradeamento, filtração (50µm) e pasteurização (65o C/30 min). O cultivo de Rubrivivax gelatinosus foi realizado sob anaerobiose em reatores de vidro durante 7 dias, em temperatura ambiente (30±5o C) e 2.000±500 lux. A recuperação da biomassa foi feita por filtração tangencial (0,2 µm; 1,5 bar), centrifugação (3.400 g/30 min; 5o C) e liofilização (-40o C) e a pulverização foi realizada manualmente. A produção de massa celular atingiu 0,18 g/L, com produtividade de 0,0634 g/L.dia. O processo promoveu redução de 52% na DQO, 48% em óleos e graxas e 22% no nitrogênio total, gerando um resíduo com pH 7,9, livre de bactérias patogênicas e, portanto, apto ao descarte. O produto obtido apresentou cor vermelho escuro (L = 22,42; C = 14,22; h = 25,48), 4,55% de umidade, 57,39% de proteína, 11,08% de extrato etéreo, 4,05% de matéria mineral, 3,03 mg/g de oxicarotenóides, 20,27 NMP/g de coliformes a 30–35o C, <1,0 NMP/g de coliformes a 45o C, 1,2x103 UFC/g de bolores e leveduras e ausência de microrganismos patogênicos. Essas características apontam para um potencial pigmentante e nutricional positivo no produto, que pode encontrar aplicação na produção animal, com segurança microbiológica. Dessa forma, fecha-se um ciclo autosustentável que pode ser adotado na própria fonte geradora do resíduo industrial, permitindo a reversão de gastos com tratamento despoluente em receitas advindas da comercialização de um novo produto.

Erva mate minimiza as alterações do perfil lipídico promovidas por elevado consumo de sacarose

The yerba mate (Ilex paraguariensis) is composed of bioactive that interfere with lipid metabolism. The objective was to evaluate if daily consumption of mate tea (MT) change the lipid deposits and dyslipidemia caused by excessive consumption of sucrose. Thirty male Wistar rats (40 days old) were divided into four groups: Group C - free access to commercial chow and deionized water; S - free access to commercial food, water and sucrose solution 30% (w/v) in water; MTS and deionized - free access to commercial feed solution, water, 30% sucrose (w/v) and treated with daily infusion of MT (soluble mate Leão Júnior®) via orogastric tube at a dose of 100 mg/kg/mc for 8 weeks. After the trial period the lipid profile was evaluated by the following parameters: a) direct weighing of the retroperitoneal (RP) and epididymal (EPI) adipose tissues; b) determination of plasma total cholesterol, triglycerides and HDL cholesterol concentration. The MT promoted the reduction of 1.4 times in both tissues RP and EPI in MTS group compared to group S. Treatment with MT decreased 2.7 times triglyceride in the MTS group compared with the group S. The sucrose consumption did not alter the plasma cholesterol concentration, however the consumption of MT significantly reduced total cholesterol circulating. The HDL cholesterol concentration, in the MTS group, showed higher concentration than in group S (1.3 times). MT prevents in young male rats the increase of lipid deposits and dyslipidemia caused by excessive consumption of sucrose.

Avaliação dos fatores críticos para a seleção e aplicação clínica dos pinos de fibra: relato de caso cliínico

Teeth that have lost much of their coronal tooth structure need intraradical devices to achieve a desired retention of the restorative material, restoring aesthetics and function to the patient. For this purpose, various types of intracanal posts have been studied, of wich the fiber posts have been highlighted with its increasing use in the dental market. The purpose of this study was to present a clinical case of using fiberglass post. As well as critically analyze the published works and points of controversy described by different authors related to factors such as different protocols cementation, surface treatments pins, fracture toughness and compression, the possibility of microleakage, diameter and length of the pin, and the various materials used in conjunction with the intracanal retainers. Thus, we concluded that fiber posts showed as an excellent alternative for anterior teeth, since have least 2 mm of tooth remaining.

Corrosion resistance of Ni-Cr alloys in different mouthwashes

Several alloys have been used for prosthodontics restorations in the last years. These alloys have a number of metals that include gold, palladium, silver, nickel, cobalt, chromium and titanium and they are used in oral cavity undergo several corrosion. Corrosion can lead to poor esthetics, compromise of physical properties, or increased biological irritation. The objective of this study was evaluated corrosion resistance of two alloys Ni-Cr and Ni-Cr-Ti in three types of mouthwashes with different active ingredients: 0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride, 0.05% sodium fluoride + 0.03% triclosan (with fluor) and 0.12% chlorohexidine digluconate. The potentiodynamic curves were performed by means of an EG&G PAR 283 potentiostat/galvanostat. The counter electrode was a platinum wire and reference electrode was an Ag/AgCl, KCl saturated. Before each experiment, working electrodes were mechanically polished with 600 and 1200 grade papers, rinsed with distilled water and dried in air. All experiments were carried out at 37.0oC in conventional three-compartment double wall glass cell containing mouthwashes. The microstructures of two alloys were observed in optical microscopy. Analysis of curves showed that Ni-Cr alloy was less reactive in the presence of 0.12% chlorohexidine digluconate while Ni-Cr-Ti alloy was more sensitive for others two types of mouthwashes (0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride  and 0.05% sodium fluoride + 0.03% triclosan). This occurred probably due presence of titanium in this alloy. Microstructural analysis reveals the presence of dendritic and eutectic microstructures for NiCr and Ni-Cr-Ti, respectively.

Clinical evaluation of a composite resin and a resin-modified glass-ionomer cement in non -carious cervical lesions: one year result

Objectives: The objective of this study was to evaluate the clinical performance of 124 non-carious cervical lesion restorations at 12 months. Materials And Methods: Three study groups were formed according to the material and technique used. All teeth received 37% phosphoric acid etching in enamel and dentin. The teeth of Group I received the conventional adhesive system Scotch Bond Multi Purpose, followed by resin composite Filtek Z350; teeth of Group II were restored with resin-modified glass-ionomer cement Fuji II LC; teeth of Group III were restored with the same resin-modified glass-ionomer cement however, before it was inserted, 2 coats of primer of the Scotch Bond Multi Purpose adhesive system were applied to dentinal tissue. The teeth were evaluated by 2 examiners with regard to the factors of retention, marginal adaptation, marginal discoloration, color alteration, presence of marginal caries lesion, anatomic shape, and sensitivity. Results: Application of the Kruskal-Wallis test showed no statistically significant difference for anatomic shape, marginal discoloration, color alteration, caries lesion, marginal adaptation, and sensitivity among the three study groups, but the variable retention presented statistically significant difference at 12 months, with Group III presenting a behavior superior to that of Group II but similar to that of Group I. Conclusion: The analyzed restorations of non-carious cervical lesions presented a good clinical performance at 12 months.

Confocal laser scanning microscopy investigation of bond interfaces involved in fiber glass post cementation

Objective: This confocal microscopy study evaluated the cement/dentin and cement/post interfaces along theroot canalwallswhenfiberglasspostswerebonded to dentin using different types of cements. Material & Methods: Thirty endodontically treated premolars were divided into 3 groups according to the adhesive materials used in the bonding procedure: Prime & Bond 2.1/Self Cure + Enforce, RelyX Unicem and RelyX Luting. Rhodamine B dye was incorporated in the luting materials for the cementation of the fiber glass posts (Exacto, Angelus) to dentin. Three transversal slices (apical, middle and coronal) were examined under confocal laser scanning microscopy. Statistical analysis was performed using the Kappa, Kruskal-Wallis and Dunnet tests, in a significance level of 5%. Results: The Prime & Bond 2.1/Self Cure + Enforce presented a uniform formation of tags in the dentin but gaps in the cement/dentin interface. The RelyX Unicem and RelyX Luting presented an adhesive interface with a fewer amount of gaps, but showed shorter tag formation than the Enforce system. All cements presented the same pattern of bubbles inside the cements. The RelyX Luting presented a greater amount of cracks inside the cement in comparison with the other cements in the coronal third, while no difference was observed between RelyX Unicem and Enforce. The RelyX Luting showed the lowest quantity of cement penetration into the post. Conclusion: In general, the quality of bonding interfaces of fiber posts luted to root canals was affected by both location and type of cement.

Clinical evaluation of multiple-surface ART restorations: three-year follow-up

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)