Analysis of convectively-generated gravity waves in mesoscale model simulations and wind profiler observations

The characteristics of convectively-generated gravity waves during an episode of deep convection near the coast of Wales are examined in both high resolution mesoscale simulations [with the (UK) Met Oce Unified Model] and in observations from a Mesosphere-Stratosphere-Troposphere (MST) wind profiling Doppler radar. Deep convection reached the tropopause and generated vertically propagating, high frequency waves in the lower stratosphere that produced vertical velocity perturbations O(1 m/s). Wavelet analysis is applied in order to determine the characteristic periods and wavelengths of the waves. In both the simulations and observations, the wavelet spectra contain several distinct preferred scales indicated by multiple spectral peaks. The peaks are most pronounced in the horizontal spectra at several wavelengths less than 50 km. Although these peaks are most clear and of largest amplitude in the highest resolution simulations (with 1 km horizontal grid length), they are also evident in coarser simulations (with 4 km horizontal grid length). Peaks also exist in the vertical and temporal spectra (between approximately 2.5 and 4.5 km, and 10 to 30 minutes, respectively) with good agreement between simulation and observation. Two-dimensional (wavenumber-frequency) spectra demonstrate that each of the selected horizontal scales contains peaks at each of preferred temporal scales revealed by the one- dimensional spectra alone.

Decadal Prediction. Can It Be Skillful?

A new field of study, “decadal prediction,” is emerging in climate science. Decadal prediction lies between seasonal/interannual forecasting and longer-term climate change projections, and focuses on time-evolving regional climate conditions over the next 10–30 yr. Numerous assessments of climate information user needs have identified this time scale as being important to infrastructure planners, water resource managers, and many others. It is central to the information portfolio required to adapt effectively to and through climatic changes. At least three factors influence time-evolving regional climate at the decadal time scale: 1) climate change commitment (further warming as the coupled climate system comes into adjustment with increases of greenhouse gases that have already occurred), 2) external forcing, particularly from future increases of greenhouse gases and recovery of the ozone hole, and 3) internally generated variability. Some decadal prediction skill has been demonstrated to arise from the first two of these factors, and there is evidence that initialized coupled climate models can capture mechanisms of internally generated decadal climate variations, thus increasing predictive skill globally and particularly regionally. Several methods have been proposed for initializing global coupled climate models for decadal predictions, all of which involve global time-evolving three-dimensional ocean data, including temperature and salinity. An experimental framework to address decadal predictability/prediction is described in this paper and has been incorporated into the coordinated Coupled Model Intercomparison Model, phase 5 (CMIP5) experiments, some of which will be assessed for the IPCC Fifth Assessment Report (AR5). These experiments will likely guide work in this emerging field over the next 5 yr.

Algorithm for generating defective graphene sheets

An algorithm is presented for the generation of molecular models of defective graphene fragments, containing a majority of 6-membered rings with a small number of 5- and 7-membered rings as defects. The structures are generated from an initial random array of points in 2D space, which are then subject to Delaunay triangulation. The dual of the triangulation forms a Voronoi tessellation of polygons with a range of ring sizes. An iterative cycle of refinement, involving deletion and addition of points followed by further triangulation, is performed until the user-defined criteria for the number of defects are met. The array of points and connectivities are then converted to a molecular structure and subject to geometry optimization using a standard molecular modeling package to generate final atomic coordinates. On the basis of molecular mechanics with minimization, this automated method can generate structures, which conform to user-supplied criteria and avoid the potential bias associated with the manual building of structures. One application of the algorithm is the generation of structures for the evaluation of the reactivity of different defect sites. Ab initio electronic structure calculations on a representative structure indicate preferential fluorination close to 5-ring defects.

Estimating detailed soil water profile records from point measurements

Temporal and spatial patterns of soil water content affect many soil processes including evaporation, infiltration, ground water recharge, erosion and vegetation distribution. This paper describes the analysis of a soil moisture dataset comprising a combination of continuous time series of measurements at a few depths and locations, and occasional roving measurements at a large number of depths and locations. The objectives of the paper are: (i) to develop a technique for combining continuous measurements of soil water contents at a limited number of depths within a soil profile with occasional measurements at a large number of depths, to enable accurate estimation of the soil moisture vertical pattern and the integrated profile water content; and (ii) to estimate time series of soil moisture content at locations where there are just occasional soil water measurements available and some continuous records from nearby locations. The vertical interpolation technique presented here can strongly reduce errors in the estimation of profile soil water and its changes with time. On the other hand, the temporal interpolation technique is tested for different sampling strategies in space and time, and the errors generated in each case are compared.

Degradation of atrazine and isoproturon in surface and sub-surface soil materials undergoing different moisture and aeration conditions

The influence of different moisture and aeration conditions on the degradation of atrazine and isoproturon was investigated in environmental samples aseptically collected from surface and sub-surface zones of agricultural land. The materials were maintained at two moisture contents corresponding to just above field capacity or 90% of field capacity. Another two groups of samples were adjusted with water to above field capacity, and, at zero time, exposed to drying-rewetting cycles. Atrazine was more persistent (t(1/2) = 22-3S days) than isoproturon (t(1/2) = 5-17 days) in samples maintained at constant moisture conditions. The rate of degradation for both herbicides was higher in samples maintained at a moisture content of 90% of field capacity than in samples with higher moisture contents. The reduction in moisture content in samples undergoing desiccation from above field capacity to much lower than field capacity enhanced the degradation of isoproturon (t(1/2) = 9-12 days) but reduced the rate of atrazine degradation (t(1/2) = 23-35-days). This demonstrates the variability between different micro-organisms in their susceptibility to desiccation. Under anaerobic conditions generated in anaerobic jars, atrazine degraded much more rapidly than isoproturon in materials taken from three soil profiles (0-250 cm depth). It is suggested that some specific micro-organisms are able to survive and degrade herbicide under severe conditions of desiccation. (C) 2004 Society of Chemical Industry.

Phenolic contents of lettuce, strawberry, raspberry, and blueberry crops cultivated under plastic films varying in ultraviolet transparency

The levels of health-related phytochemicals were determined in lettuce leaf and in strawberry, raspberry and blueberry fruits grown in near-commercial conditions under plastic films of three different UV transparencies. In the red lettuce Lollo Rosso, total phenolics, anthocyanin, luteolin and quercetin levels were all raised by changing from a UV blocking film to a film of low UV transparency, and to a film of high UV transparency. The related green lettuce, Lollo Biondo, cultivated under the same conditions, showed virtually no phytochemical responses to the same variation in UV levels. Overall, the phenolic levels of strawberries, raspberries, and blueberries were unresponsive to the UV transparency of the plastic film under which the crops were grown. The significance of these findings is discussed in relation to the nutritional quality of soft fruit and salad crops which are increasingly being grown commercially under plastic tunnels.

Strengthening argumentation in medical explanations by text planning revision

Explanations are an important by-product of medical decisionsupport activities, as they have proved to favour compliance and correct treatment performance. To achieve this purpose, these texts should have a strong argumentation content and should adapt to emotional, as well as to rational attitudes of the Addressee. This paper describes how Rhetorical Sentence Planning can contribute to this aim: the rulebased plan discourse revision is introduced between Text Planning and Linguistic Realization, and exploits knowledge about the user personality and emotions and about the potential impact of domain items on user compliance and memory recall. The proposed approach originates from analytical and empirical evaluation studies of computer generated explanation texts in the domain of drug prescription. This work was partially supported by a British-Italian Collaboration in Research and Higher Education Project, which involved the Universities of Reading and of Bari, in 1996.

Generating recipient-centred explanations about drug prescription

In this paper we describe how we generated written explanations to ‘indirect users’ of a knowledge-based system in the domain of drug prescription. We call ‘indirect users’ the intended recipients of explanations, to distinguish them from the prescriber (the ‘direct’ user) who interacts with the system. The Explanation Generator was designed after several studies about indirect users' information needs and physicians' explanatory attitudes in this domain. It integrates text planning techniques with ATN-based surface generation. A double modeling component enables adapting the information content, order and style to the indirect user to whom explanation is addressed. Several examples of computer-generated texts are provided, and they are contrasted with the physicians' explanations to discuss advantages and limits of the approach adopted.

Mediating between hearer's and speaker's views in the generation of adaptive explanations

In this article, we examine the case of a system that cooperates with a “direct” user to plan an activity that some “indirect” user, not interacting with the system, should perform. The specific application we consider is the prescription of drugs. In this case, the direct user is the prescriber and the indirect user is the person who is responsible for performing the therapy. Relevant characteristics of the two users are represented in two user models. Explanation strategies are represented in planning operators whose preconditions encode the cognitive state of the indirect user; this allows tailoring the message to the indirect user's characteristics. Expansion of optional subgoals and selection among candidate operators is made by applying decision criteria represented as metarules, that negotiate between direct and indirect users' views also taking into account the context where explanation is provided. After the message has been generated, the direct user may ask to add or remove some items, or change the message style. The system defends the indirect user's needs as far as possible by mentioning the rationale behind the generated message. If needed, the plan is repaired and the direct user model is revised accordingly, so that the system learns progressively to generate messages suited to the preferences of people with whom it interacts.

What do patients want to know? An empirical approach to explanation generation and validation

This article describes an empirical, user-centred approach to explanation design. It reports three studies that investigate what patients want to know when they have been prescribed medication. The question is asked in the context of the development of a drug prescription system called OPADE. The system is aimed primarily at improving the prescribing behaviour of physicians, but will also produce written explanations for indirect users such as patients. In the first study, a large number of people were presented with a scenario about a visit to the doctor, and were asked to list the questions that they would like to ask the doctor about the prescription. On the basis of the results of the study, a categorization of question types was developed in terms of how frequently particular questions were asked. In the second and third studies a number of different explanations were generated in accordance with this categorization, and a new sample of people were presented with another scenario and were asked to rate the explanations on a number of dimensions. The results showed significant differences between the different explanations. People preferred explanations that included items corresponding to frequently asked questions in study 1. For an explanation to be considered useful, it had to include information about side effects, what the medication does, and any lifestyle changes involved. The implications of the results of the three studies are discussed in terms of the development of OPADE's explanation facility.

Modeling the user knowledge by belief networks

This paper describes the user modeling component of EPIAIM, a consultation system for data analysis in epidemiology. The component is aimed at representing knowledge of concepts in the domain, so that their explanations can be adapted to user needs. The first part of the paper describes two studies aimed at analysing user requirements. The first one is a questionnaire study which examines the respondents' familiarity with concepts. The second one is an analysis of concept descriptions in textbooks and from expert epidemiologists, which examines how discourse strategies are tailored to the level of experience of the expected audience. The second part of the paper describes how the results of these studies have been used to design the user modeling component of EPIAIM. This module works in a two-step approach. In the first step, a few trigger questions allow the activation of a stereotype that includes a "body" and an "inference component". The body is the representation of the body of knowledge that a class of users is expected to know, along with the probability that the knowledge is known. In the inference component, the learning process of concepts is represented as a belief network. Hence, in the second step the belief network is used to refine the initial default information in the stereotype's body. This is done by asking a few questions on those concepts where it is uncertain whether or not they are known to the user, and propagating this new evidence to revise the whole situation. The system has been implemented on a workstation under UNIX. An example of functioning is presented, and advantages and limitations of the approach are discussed.

User interface standards for expert systems: are they appropriate?

In recent years there has been a growing debate over whether or not standards should be produced for user system interfaces. Those in favor of standardization argue that standards in this area will result in more usable systems, while those against argue that standardization is neither practical nor desirable. The present paper reviews both sides of this debate in relation to expert systems. It argues that in many areas guidelines are more appropriate than standards for user interface design.