Virtual knowledge brokering : describing the roles and strategies used by knowledge brokers in a pediatric physiotherapy virtual community of practice

Introduction: Knowledge transfer in pediatric rehabilitation is challenging and requires active, multifaceted strategies. The use of knowledge brokers (KBs) is one such strategy noted to promote clinician behavior change. The success of using KBs to transfer knowledge relies on their ability to adapt to ever-changing clinical contexts. In addition, with the rapid growth of online platforms as knowledge transfer forums, KBs must become effective in virtual environments. Although the role of KBs has been studied in various clinical contexts, their emerging role in specific online environments designed to support evidence-based behavior change has not yet been described. Our objective is to describe the roles of, and strategies used by, four KBs involved in a virtual community of practice to guide and inform future online KB interventions. Methods: A descriptive design guided this study and a thematic content analysis process was used to analyze online KB postings. The Promoting Action on Research in Health Sciences knowledge transfer framework and online andragogical learning theories assisted in the coding. A thematic map was created illustrating the links between KBs' strategies and emerging roles in the virtual environment. Results: We analyzed 95 posts and identified three roles: 1) context architect: promoting a respectful learning environment, 2) knowledge sharing promoter: building capacity, and 3) linkage creator: connecting research-to-practice. Strategies used by KBs reflected invitational, constructivism, and connectivism approaches, with roles and strategies changing over time. Discussion: This study increases our understanding of the actions of KBs in virtual contexts to foster uptake of research evidence in pediatric physiotherapy. Our results provide valuable information about the knowledge and skills required by individuals to fulfill this role in virtual environments.

Enhancing legume ecosystem services through an understanding of plant–pollinator interplay

Legumes are bee-pollinated, but to a different extent. The importance of the plant– pollinator interplay (PPI), in flowering crops such as legumes lies in a combination of the importance of pollination for the production service and breeding strategies, plus the increasing urgency in mitigating the decline of pollinators through the development and implementation of conservation measures. To realize the full potential of the PPI, a multidisciplinary approach is required. This article assembles an international team of genebank managers, geneticists, plant breeders, experts on environmental governance and agro-ecology, and comprises several sections. The contributions in these sections outline both the state of the art of knowledge in the field and the novel aspects under development, and encompass a range of reviews, opinions and perspectives. The first three sections explore the role of PPI in legume breeding strategies. PPI based approaches to crop improvement can make it possible to adapt and re-design breeding strategies to meet both goals of: (1) optimal productivity, based on an efficient use of pollinators, and (2) biodiversity conservation. The next section deals with entomological aspects and focuses on the protection of the “pest control service” and pollinators in legume crops. The final section addresses general approaches to encourage the synergybetweenfoodproductionandpollinationservicesatfarmerfieldlevel.Twobasic approaches are proposed: (a) Farming with Alternative Pollinators and (b) Crop Design System.

Understanding the Coach-Coachee-Client relationship: A conceptual framework for executive coaching

Objectives: There is a need for a more comprehensive understanding of how coaching processes psychologically operate. This paper presents the findings from a study aimed to characterise the coaching process experience and to identify how specific experiences contribute to coaching outcomes. Design: A qualitative design was adopted. Data was analysed by Interpretative Phenomenological Analysis (Smith, 2008). Method: Data was collected from 10 participants, this included coaches (N=4), coachees (N=5) and one commissioner, three times along the coaching process. A total of 30 interviews were undertaken. Findings: Coaching outcomes can be generated by three essential mechanisms: Projection of Future Self; Perspectivation of Present Self; and Confirmation of Past/Present Self. Each mechanism’s name represents a particular effect on coachee’s self and may evolve diverse coaching behaviours. Although they all can be actively managed to generate sustainability of outcomes, each mechanism tends to contribute differently to that sustainability. Conclusion: The study provides a comprehensive understanding of the different methodological and experiential ingredients of the coaching process and its implications. While most coaching research is focused on identifying coaching results based on a retrospective analysis, this is one of the first studies accompanying longitudinally the coaching process and capturing an integrative understanding of its dynamics. Moreover, the study provides evidence of how coaching can differently deliver sustainable outcomes and be used as a valuable developmental tool in organisations. The study contributes to our understanding of theory building and raises questions for further research on the uniqueness of coaching interventions.

Design and Technology: A Historical Perspective on the Mediating Role of Technology Between Industrial Design and Engineering

The interdisciplinary relationship between industrial design and mechanical engineering is sensitive. This research focuses on understanding how one can positively mediate this relation, in order to foster innovation. In this paper, technology is considered for this role since it has, in some historical moments, served as an integrator of these two disciplines, in processes that led to innovation. By means of an extensive literature review, covering three different periods of technological development, both disciplines’ positioning in society and their link with technology are analyzed and compared. The three case studies selected help to illustrate, precisely, the technology positioning between both disciplines and society. Literature assumes that industrial design is rooted in the rise of criticism against both the machine and the mechanized production. This is an opposing approach to the current paradigm, in which design plays a fundamental role in adapting technology to society. Also, the social problems caused by the mechanized and massive production triggered the mechanical engineering emergence, as a professionalized discipline. Technology was intrinsically connected with both industrial design and mechanical engineering emergence and subsequent evolution. In the technology conflict with society lays the reform and regulation for design practice, in its broadest sense.

Interdisciplinarity and Design Conceptualisation: Contributions from a Small-Scale Design Experiment

Literature emphasises the sparse research focused in collaborative and open approaches in the design conceptualisation stage, also known as the Fuzzy Front-End (FFE). Presently, the most challenging discussion arising from this specific field of research lies in understanding on whether or not to structure the referred conceptual stage. Accordingly, the established hypothesis behind this study sustains that a structured approach in the FFE would benefit the interdisciplinary dialogue. Therefore, two objectives support this study: to understand the benefits of an interdisciplinary approach in the FFE, and to test one proposed model for this conceptual stage. By means of a small-scale design experiment, this paper pretends to give additional contributions to this area of research, in the context of new product development (NPD). The general research supporting this specific study aims to conceptualise in the area of newly and futuristic aircraft configurations. Hence, this same topic based the conceptualisation process in the conducted ideation sessions, which are conducted by five different teams of three elements each. The results of the different ideation sessions reinforce the contemporary paradigm of Open Innovation (OI), which is based in trust and communication to better collaborate. The postulated hypothesis for this study is partially validated as teams testing the proposed and structured model generally consider that its usage would benefit the integration of different disciplines. Besides, a general feeling that a structured approach integrates different perspectives and gives creativity a focus pervades. Nevertheless, the small-scale of the design experiment attributes some limitations to this study, despite giving new insights in how to better organise coming and more sustained studies. Interestingly, the importance of sketching as an interdisciplinary means of communication is underlined with the obtained results.

“ The Creation of an Urban Landscape” in Adaptive reuse,the modern movement toward the future, 14th international conference proceedings, Do_co.mo.mo international, Lisboa ( indexed by SCOPUS)

The headquarters and park of the Calouste Gulbenkian Foundation in Lisbon represent the first modern Portuguese environment with an outstanding relation between exterior and interior as a spatial continuum . As such, the project refused the more common conceptual attitude of interior plus exterior. This unitary view revealed a clear understanding of the proposed site for the project and what could have been Calouste Sarkis Gulbenkian (1869-1955) expectations, while concretizing Modern Movement ideals regarding landscape architecture and architecture. Through its design the park mediates the relation between the buildings’ super-structures, the urban context, and the human scale, while generating a unifying system established by the complicity between natural and synthetic materials. From the first moment of the project’s design process, this complicity resulted in a set of strategies that met programmatic

Design, synthesis and biological evaluation of dual inhibitors of GSK-3B and Fyn kinases for the study of inflammatory pathways in neurodegenerative diseases

Neuroinflammation represents a key hallmark of neurodegenerative diseases and is the result of a complex network of signaling cascades within microglial cells. A positive feedback loop exists between inflammation, microglia activation and protein misfolding processes, that, together with oxidative stress and excitotoxicity, lead to neuronal degeneration. Therefore, targeting this vicious cycle can be beneficial for mitigating neurodegeneration and cognitive decline in central nervous system disorders. At molecular level, GSK-3B and Fyn kinases play a crucial role in microglia activation and their deregulation has been associated to many neurodegenerative diseases. Thus, we envisioned their combined targeting as an effective approach to disrupt this toxic loop. Specifically in this project, a hit compound, based on a 7-azaindole-3-aminothiazole structure, was first identified in a virtual screening campaign, and displayed a weak dual inhibitory activity on GSK-3B and Fyn, unbalanced towards the former. Then, in a commitment to uncover the structural features required for modulating the activity on the two targets, we systematically manipulated this compound by inserting various substitution patterns in different positions. The most potent compounds obtained were advanced to deeper investigations to test their ability of tackling the inflammatory burden also in cellular systems and to unveil their binding modes within the catalytic pocket. The new class of molecules synthesized emerged as a valuable tool to deepen our understanding of the complex network governing the inflammatory events in neurodegenerative disorders.

Comparative constitutional design for divided societies: a model to explain vonstitutional asymmetries

Comparative studies on constitutional design for divided societies indicate that there is no magic formula to the challenges that these societies pose, as lots of factors influence constitutional design. In the literature on asymmetric federalism, the introduction of constitutional asymmetries is considered a flexible instrument of ethnic conflict resolution, as it provides a mixture of the two main theoretical approaches to constitutional design for divided societies (i.e., integration and accommodation). Indeed, constitutional asymmetries are a complex and multifaceted phenomenon, as their degree of intensity can vary across constitutional systems, and there are both legal and extra-legal factors that may explain such differences. This thesis argues that constitutional asymmetries provide a flexible model of constitutional design and aims to explore the legal factors that are most likely to explain the different degrees of constitutional asymmetry in divided multi-tiered systems. To this end, the research adopts a qualitative methodology, i.e., Qualitative Comparative Analysis (QCA), which allows an understanding of whether a condition or combination of conditions (i.e., the legal factors) determine the outcome (i.e., high, medium, low degree of constitutional asymmetry, or constitutional symmetry). The QCA is conducted on 16 divided multi-tiered systems, and for each case, the degree of constitutional asymmetry was analyzed by employing standardized indexes on subnational autonomy, allowing for a more precise measure of constitutional asymmetry than has previously been provided in the literature. Overall, the research confirms the complex nature of constitutional asymmetries, as the degrees of asymmetries vary substantially not only across systems but also within cases among the dimensions of subnational autonomy. The outcome of the Qualitative Comparative Analysis also confirms a path of complex causality since the different degrees of constitutional asymmetry always depend on several legal factors, that combined produce a low, medium, or high degree of constitutional asymmetry or, conversely, constitutional symmetry.

Understanding food waste through behavioural theories in different settings

SDG 12.3 aims to promote sustainable consumption and production patterns by addressing the global food loss and waste problem. Given the multiple interrelated impacts, food waste is recognized as one of the major food system challenges. The scope of this work is to contribute to the understanding on food waste generation and potential approaches to tackle it. This work was specifically designed to achieve the following goals: 1) Understand specific factors that affect individual behaviours to generate FW at household, 2) Analyse the effective ways to reduce FW through behaviour change perspective given the catering and hospitality sector, and 3) Provide an evidence synthesis on intervention study that incorporate stakeholder insights focus on school meals. The first goal of identifying food waste drivers was achieved by the systematically reviewing on peer-reviewed and grey literature. The Motivation-Opportunity-Ability (MOA) framework was applied to frame consumer behavioural drivers and identify levers that could be potentially utilized to reduce food waste. Consumer segmentation was further discussed to provide insights for developing tailored food waste reduction interventions. The second goal required the identification on practical interventions, which has been accomplished by systematic literature review basing on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses. The efficiency and working mechanism of interventions were evaluated basing on the combination of MOA and behavioural change wheel. Building on the evidence of effective interventions, a roadmap was developed for policymakers and practitioners to lead their own pathway on intervention study and upscaling. The third aim has been achieved with a school meals interventions mapping and the implementation of stakeholder workshops. The method was built on the literature review and then enriched by intervention co-design dialogue among stakeholders. The overall conclusion addressed challenges of food waste determents identification, tailored reduction interventions developing, sustainable consumption promotion with school meals.

IDeS methodology applied to automotive component re-engineering focused on lightweight and high-strength by additive manufacturing

The project aims to gather an understanding of additive manufacturing and other manufacturing 4.0 techniques with an eyesight for industrialization. First the internal material anisotropy of elements created with the most economically feasible FEM technique was established. An understanding of the main drivers for variability for AM was portrayed, with the focus on achieving material internal isotropy. Subsequently, a technique for deposition parameter optimization was presented, further procedure testing was performed following other polymeric materials and composites. A replicability assessment by means of the use of technology 4.0 was proposed, and subsequent industry findings gathered the ultimate need of developing a process that demonstrate how to re-engineer designs in order to show the best results with AM processing. The latest study aims to apply the Industrial Design and Structure Method (IDES) and applying all the knowledge previously stacked into fully reengineer a product with focus of applying tools from 4.0 era, from product feasibility studies, until CAE – FEM analysis and CAM – DfAM. These results would help in making AM and FDM processes a viable option to be combined with composites technologies to achieve a reliable, cost-effective manufacturing method that could also be used for mass market, industry applications.

Computational design of a new type of sandwich cross-section for a defined solution of a tree-like column produced by wire-and-arc additive manufacturing

When it comes to designing a structure, architects and engineers want to join forces in order to create and build the most beautiful and efficient building. From finding new shapes and forms to optimizing the stability and the resistance, there is a constant link to be made between both professions. In architecture, there has always been a particular interest in creating new shapes and types of a structure inspired by many different fields, one of them being nature itself. In engineering, the selection of optimum has always dictated the way of thinking and designing structures. This mindset led through studies to the current best practices in construction. However, both disciplines were limited by the traditional manufacturing constraints at a certain point. Over the last decades, much progress was made from a technological point of view, allowing to go beyond today's manufacturing constraints. With the emergence of Wire-and-Arc Additive Manufacturing (WAAM) combined with Algorithmic-Aided Design (AAD), architects and engineers are offered new opportunities to merge architectural beauty and structural efficiency. Both technologies allow for exploring and building unusual and complex structural shapes in addition to a reduction of costs and environmental impacts. Through this study, the author wants to make use of previously mentioned technologies and assess their potential, first to design an aesthetically appreciated tree-like column with the idea of secondly proposing a new type of standardized and optimized sandwich cross-section to the construction industry. Parametric algorithms to model the dendriform column and the new sandwich cross-section are developed and presented in detail. A catalog draft of the latter and methods to establish it are then proposed and discussed. Finally, the buckling behavior of this latter is assessed considering standard steel and WAAM material properties.

Design and Characterization of an Active Three-Phase EMI Noise Separator for Three-Phase Power Electronics Systems

One of the major issues for power converters that are connected to the electric grid are the measurement of three phase Conduced Emissions (CE), which are regulated by international and regional standards. CE are composed of two components which are Common Mode (CM) noise and Differential Mode (DM) noise. To achieve compliance with these regulations the Equipment Under Test (EUT) includes filtering and other electromagnetic emission control strategies. The separation of differential mode and common mode noise in Electromagnetic Interference (EMI) analysis is a well-known procedure which is useful especially for the optimization of the EMI filter, to improve the CM or DM attenuation depending on which component of the conducted emissions is predominant, and for the analysis and the understanding of interference phenomena of switched mode power converters. However, separating both components is rarely done during measurements. Therefore, in this thesis an active device for the separation of the CM and DM EMI noise in three phase power electronic systems has been designed and experimentally analysed.

Iis--integrated Interactome System: A Web-based Platform For The Annotation, Analysis And Visualization Of Protein-metabolite-gene-drug Interactions By Integrating A Variety Of Data Sources And Tools.

High-throughput screening of physical, genetic and chemical-genetic interactions brings important perspectives in the Systems Biology field, as the analysis of these interactions provides new insights into protein/gene function, cellular metabolic variations and the validation of therapeutic targets and drug design. However, such analysis depends on a pipeline connecting different tools that can automatically integrate data from diverse sources and result in a more comprehensive dataset that can be properly interpreted. We describe here the Integrated Interactome System (IIS), an integrative platform with a web-based interface for the annotation, analysis and visualization of the interaction profiles of proteins/genes, metabolites and drugs of interest. IIS works in four connected modules: (i) Submission module, which receives raw data derived from Sanger sequencing (e.g. two-hybrid system); (ii) Search module, which enables the user to search for the processed reads to be assembled into contigs/singlets, or for lists of proteins/genes, metabolites and drugs of interest, and add them to the project; (iii) Annotation module, which assigns annotations from several databases for the contigs/singlets or lists of proteins/genes, generating tables with automatic annotation that can be manually curated; and (iv) Interactome module, which maps the contigs/singlets or the uploaded lists to entries in our integrated database, building networks that gather novel identified interactions, protein and metabolite expression/concentration levels, subcellular localization and computed topological metrics, GO biological processes and KEGG pathways enrichment. This module generates a XGMML file that can be imported into Cytoscape or be visualized directly on the web. We have developed IIS by the integration of diverse databases following the need of appropriate tools for a systematic analysis of physical, genetic and chemical-genetic interactions. IIS was validated with yeast two-hybrid, proteomics and metabolomics datasets, but it is also extendable to other datasets. IIS is freely available online at: http://www.lge.ibi.unicamp.br/lnbio/IIS/.

Study Of The Homogeneity Of Drug Loaded In Polymeric Films Using Near-infrared Chemical Imaging And Split-plot Design.

Split-plot design (SPD) and near-infrared chemical imaging were used to study the homogeneity of the drug paracetamol loaded in films and prepared from mixtures of the biocompatible polymers hydroxypropyl methylcellulose, polyvinylpyrrolidone, and polyethyleneglycol. The study was split into two parts: a partial least-squares (PLS) model was developed for a pixel-to-pixel quantification of the drug loaded into films. Afterwards, a SPD was developed to study the influence of the polymeric composition of films and the two process conditions related to their preparation (percentage of the drug in the formulations and curing temperature) on the homogeneity of the drug dispersed in the polymeric matrix. Chemical images of each formulation of the SPD were obtained by pixel-to-pixel predictions of the drug using the PLS model of the first part, and macropixel analyses were performed for each image to obtain the y-responses (homogeneity parameter). The design was modeled using PLS regression, allowing only the most relevant factors to remain in the final model. The interpretation of the SPD was enhanced by utilizing the orthogonal PLS algorithm, where the y-orthogonal variations in the design were separated from the y-correlated variation.

Understanding Red Blood Cell Parameters In The Context Of The Frailty Phenotype: Interpretations Of The Fibra (frailty In Brazilian Seniors) Study.

Frailty and anemia in the elderly appear to share a common pathophysiology associated with chronic inflammatory processes. This study uses an analytical, cross-sectional, population-based methodology to investigate the probable relationships between frailty, red blood cell parameters and inflammatory markers in 255 community-dwelling elders aged 65 years or older. The frailty phenotype was assessed by non-intentional weight loss, fatigue, low grip strength, low energy expenditure and reduced gait speed. Blood sample analyses were performed to determine hemoglobin level, hematocrit and reticulocyte count, as well as the inflammatory variables IL-6, IL-1ra and hsCRP. In the first multivariate analysis (model I), considering only the erythroid parameters, Hb concentration was a significant variable for both general frailty status and weight loss: a 1.0g/dL drop in serum Hb concentration represented a 2.02-fold increase (CI 1.12-3.63) in an individual's chance of being frail. In the second analysis (model II), which also included inflammatory cytokine levels, hsCRP was independently selected as a significant variable. Each additional year of age represented a 1.21-fold increase in the chance of being frail, and each 1-unit increase in serum hsCRP represented a 3.64-fold increase in the chance of having the frailty phenotype. In model II reticulocyte counts were associated with weight loss and reduced metabolic expenditure criteria. Our findings suggest that reduced Hb concentration, reduced RetAbs count and elevated serum hsCRP levels should be considered components of frailty, which in turn is correlated with sarcopenia, as evidenced by weight loss.