INSULATOR-TO-METAL TRANSITION IN POLYTHIOPHENE

In the present work, the electronic structure of polythiophene at several doping levels is investigated by the use of the Huckel Hamiltonian with sigma-bond compressibility. Excess charges are assumed to be stored in conformational defects of the bipolaron type. The Hamiltonian matrix elements representative of a bipolaron are obtained from a previous thiophene oligomer calculation, and then transferred to very long chains. Negative factor counting and inverse iteration techniques have been used to evaluate densities of states and wave functions, respectively. Several types of defect distributions were analyzed. Our results are consistent with the following: (i) the bipolaron lattice does not present a finite density of states at the Fermi energy at any doping level; (ii) bipolaron clusters show an insulator-to-metal transition at 8 mol% doping level; (iii) segregation disorder shows an insulator-to-metal transition for doping levels in the range 20-30 mor %.

Insulator-to-metal transition driven by clustering of solitons in polyacetylene

It's believed that the simple Su-Schrieffer-Heeger Hamiltonian can not predict the insulator to metal transition of transpolyacetylene (t-PA). The soliton lattice configuration at a doping level y=6% still has a semiconductor gap. Disordered distributions of solitons close the gap, but the electronic states around the Fermi energy are localized. However, within the same framework, it is possible to show that a cluster of solitons can produce dramatic changes in the electronic structure, allowing an insulator-to-metal transition.

Metal-insulator transition in Nd1-xEuxNiO 3 compounds

Polycrystalline Nd1-xEuxNiO3 (0≤x≤0.5) compounds were synthesized in order to investigate the character of the metal-insulator (MI) phase transition in this series. Samples were prepared through the sol-gel route and subjected to heat treatments at ∼1000 °C under oxygen pressures as high as 80bar. X-ray diffraction (XRD) and neutron powder diffraction (NPD), electrical resistivity ρ(T), and magnetization M(T) measurements were performed on these compounds. The NPD and XRD results indicated that the samples crystallize in an orthorhombic distorted perovskite structure, space group Pbnm. The analysis of the structural parameters revealed a sudden and small expansion of ∼0.2% of the unit cell volume when electronic localization occurs. This expansion was attributed to a small increase of ∼0.003 of the average Ni-O distance and a simultaneous decrease of ∼-0.5° of the Ni-O-Ni superexchange angle. The ρ(T) measurements revealed a MI transition occurring at temperatures ranging from TMI∼193 to 336K for samples with x ≤ 0 and 0.50, respectively. These measurements also show a large thermal hysteresis in NdNiO3 during heating and cooling processes, suggesting a first-order character of the phase transition at TMI. The width of this thermal hysteresis was found to decrease appreciably for the sample Nd 0.7Eu0.3NiO3. The results indicate that cation disorder associated with increasing substitution of Nd by Eu is responsible for changing the first-order character of the transition in NdNiO3. © 2006 IOP Publishing Ltd.

Gas phase photocatalytic bacteria inactivation using metal modified TiO2 catalysts

The present study describes the efficiency of heterogeneous photocatalytic reactor for the inactivation of three air born bacteria, Escherichia coli, Bacillus subtilis and Staphylococcus aureus using metal modified TiO2 photocatalysts and blacklight irradiation. The catalysts were prepared by photodeposition of silver, palladium or iron on commercial TiO2, immobilized on glass plates. X-ray photoelectron spectroscopy analysis was applied to determine the atomic percentage and species of each metal on the TiO2 surface, showing that 85% of silver, 73% of palladium and 45% of iron were present in metallic form on TiO2 surface. The plates were positioned on the inner lateral walls of a chamber through which the contaminated air flow passed for disinfection. Irradiation of bare TiO 2 resulted in 50% inactivation of E. coli while 41% and 35% inactivation of B. subtilis and S. aureus were obtained, respectively. When metal modified TiO2 was applied, the inactivation of B. subtilis was improved to 91% using Pd-TiO2 while of S. aureus was improved to 94% with Fe-TiO2, showing in this case no significant difference when compared to Ag-TiO2 and Pd-TiO2. In contrast, inactivation of E. coli was not significantly increased when metal modified TiO2 was used, ranging from 47% to 57%. © 2012 Elsevier B.V.

Effect of the relationship between particle size, inter-particle distance, and metal loading of carbon supported fuel cell catalysts on their catalytic activity

The effect of the relationship between particle size (d), inter-particle distance (x(i)), and metal loading (y) of carbon supported fuel cell Pt or PtRu catalysts on their catalytic activity, based on the optimum d (2.5-3 nm) and x(i)/d (>5) values, was evaluated. It was found that for y < 30 wt%, the optimum values of both d and x(i)/d can be always obtained. For y >= 30 wt%, instead, the positive effect of a thinner catalyst layer of the fuel cell electrode than that using catalysts with y < 30 wt% is concomitant to a decrease of the effective catalyst surface area due to an increase of d and/or a decrease of x(i)/d compared to their optimum values, with in turns gives rise to a decrease in the catalytic activity. The effect of the x(i)/d ratio has been successfully verified by experimental results on ethanol oxidation on PtRu/C catalysts with same particle size and same degree of alloying but different metal loading. Tests in direct ethanol fuel cells showed that, compared to 20 wt% PtRu/C, the negative effect of the lower x(i)/d on the catalytic activity of 30 and 40 wt% PtRu/C catalysts was superior to the positive effect of the thinner catalyst layer.

Microstructure and metal-insulator transition in single crystalline KMo4O6

High quality KMo4O6 single crystals with tetragonal structure (space group P4/mbm) have been prepared by fused salt electrolysis. The crystals were studied by scanning electron microscopy (SEM), X-ray diffractometry, electrical resistivity, and magnetization measurements. X-ray powder diffraction patterns and SEM have given some information on the growth of single crystals. Electrical resistivity as a function of temperature shows that the KMo4O6 compound is a bad metal with resistivity change of approximately 30% in the temperature range from 2 to 300K. A metal-insulator transition (MIT), observed at approximately 110K, has been also confirmed for this material. Magnetization as a function of temperature agrees with previous report, however a magnetic ordering has been observed in M(H) curves in the whole temperature range.

Glycerol oxidehydration to acrylic acid on complex mixed-metal oxides

The project of this Ph.D. thesis is based on a co-supervised collaboration between Università di Bologna, ALMA MATER STUDIORUM (Italy) and Instituto de Tecnología Química, Universitat Politècnica de València ITQ-UPV (Spain). This Ph.D. thesis is about the synthesis, characterization and catalytic testing of complex mixed-oxide catalysts mainly related to the family of Hexagonal Tungsten Bronzes (HTBs). These materials have been little explored as catalysts, although they have a great potential as multifunctional materials. Their peculiar acid properties can be coupled to other functionalities (e.g. redox sites) by isomorphous substitution of tungsten atoms with other transition metals such as vanadium, niobium and molybdenum. In this PhD thesis, it was demonstrated how it is possible to prepare substituted-HTBs by hydrothermal synthesis; these mixed-oxide were fully characterize by a number of physicochemical techniques such as XPS, HR-TEM, XAS etc. They were also used as catalysts for the one-pot glycerol oxidehydration to acrylic acid; this reaction might represent a viable chemical route to solve the important issue related to the co-production of glycerin along the biodiesel production chain. Acrylic acid yields as high as 51% were obtained and important structure-reactivity correlations were proved to govern the catalytic performance; only fine tuning of acid and redox properties as well as the in-framework presence of vanadium are fundamental to achieve noteworthy yields into the acid monomer. The overall results reported herein might represent an important contribution for future applications of HTBs in catalysis as well as a general guideline for a multifaceted approach for their physicochemical characterization.

Synthesis and metal complexes of C2 symmetric ligands obtained from (R)-(+)-Betti and dialdehydes for asymmetric induction reactions

The aim of this master’s research thesis was the employment of an enantiopure 1,3-aminoalcohol, the 1-(α-aminobenzyl)-2-naphthol, known as Betti base, for the synthesis of some novel compounds which show a C2 symmetry. Some of these compounds, after derivatization, were used as ligands in association with transition metals to prepare some catalysts for enantioselective catalytic reactions. Some aminoalcohol (Salan-type) derivatives of these compounds were obtained upon reduction and in some cases it was possible to obtain complexes with transition metals such as Mn, Ni, Co and Cu. Furthermore a novel 6-membered analogue bisoxazoline ligand, 2,6-bis((R)-1-Phenyl-1H-naphtho[1,2-e][1,3]oxazin-3-yl)pyridine, was obtained and from it two Cu-complexes were prepared. The metal complexes were employed in some reactions to test the asymmetric induction, which was in some cases up to discrete values.

Broken symmetry and strangeness of the semiconductor impurity band metal-insulator transition

The filamentary model of the metal-insulator transition in randomly doped semiconductor impurity bands is geometrically equivalent to similar models for continuous transitions in dilute antiferromagnets and even to the λ transition in liquid He, but the critical behaviors are different. The origin of these differences lies in two factors: quantum statistics and the presence of long range Coulomb forces on both sides of the transition in the electrical case. In the latter case, in addition to the main transition, there are two satellite transitions associated with disappearance of the filamentary structure in both insulating and metallic phases. These two satellite transitions were first identified by Fritzsche in 1958, and their physical origin is explained here in geometrical and topological terms that facilitate calculation of critical exponents.

VO: a strongly correlated metal close to a Mott-Hubbard transition

Here, we present experimental and computational evidences to support that rocksalt cubic VO is a strongly correlated metal with non-Fermi-liquid thermodynamics and an unusually strong spin-lattice coupling. An unexpected change of sign of metallic thermopower with composition is tentatively ascribed to the presence of a pseudogap in the density of states. These properties are discussed as signatures of the proximity to a magnetic quantum phase transition. The results are summarized in an electronic phase diagram for the 3d monoxides, which resembles that of other strongly correlated systems. The structural and electronic simplicity of 3d monoxides makes them ideal candidates to progress in the understanding of highly correlated electron systems.

Coinage Metal Complexes as Chiral Catalysts for 1,3-Dipolar Cycloadditions

In this account, we describe the experience of our research group in the implementation of chiral coinage metal complexes into the efficient enantioselective 1,3-DC of azomethine ylides derived from α-amino acids and azlactones with different dipolarophiles. The corresponding chiral metallodipoles were generated in situ and next focused on the synthesis of highly substituted prolines. For this purpose, privileged ligands such as phosphoramidites and binap with silver(I), gold(I) and copper(II) salts are described. Depending from the ligand and mainly from the metal salt it can be possible to control the facial endo/exo-diasteroselectivity and the enantioselectivity of these types of processes. The synthetic processes are also supported by DFT calculations in order to elucidate the most plausible mechanism and the stereochemical results.

Low metal content Co and Ni alumina supported catalysts for the CO2 reforming of methane

Low metal content Co and Ni alumina supported catalysts (4.0, 2.5 and 1.0 wt% nominal metal content) have been prepared, characterized (by ICP-OES, TEM, TPR-H2 and TPO) and tested for the CO2 reforming of methane. The objective is to optimize the metal loading in order to have a more efficient system. The selected reaction temperature is 973 K, although some tests at higher reaction temperature have been also performed. The results show that the amount of deposited carbon is noticeably lower than that obtained with the Co and Ni reference catalysts (9 wt%), but the CH4 and CO2 conversions are also lower. Among the catalysts tested, the Co(1) catalyst (the value in brackets corresponds to the nominal wt% loading) is deactivated during the first minutes of reaction because CoAl2O4 is formed, while Ni(1) and Co(2.5) catalysts show a high specific activity for methane conversion, a high stability and a very low carbon deposition.

Design and synthesis of constrained azacyclic pyrrolidine analogues of FTY720 as anticancer agents & metal coordination-controlled and bifunctional catalysis toward tertiary β-Ketols

Cette thèse se compose en deux parties: Première Partie: La conception et la synthèse d’analogues pyrrolidiniques, utilisés comme agents anticancéreux, dérivés du FTY720. FTY720 est actuellement commercialisé comme médicament (GilenyaTM) pour le traitement de la sclérose en plaques rémittente-récurrente. Il agit comme immunosuppresseur en raison de son effet sur les récepteurs de la sphingosine-1-phosphate. A fortes doses, FTY720 présente un effet antinéoplasique. Cependant, à de telles doses, un des effets secondaires observé est la bradycardie dû à l’activation des récepteurs S1P1 et S1P3. Ceci limite son potentiel d’utilisation lors de chimiothérapie. Nos précédentes études ont montré que des analogues pyrrolidiniques dérivés du FTY720 présentaient une activité anticancéreuse mais aucune sur les récepteurs S1P1 et S1P3. Nous avons soumis l’idée qu’une étude relation structure-activité (SARs) pourrait nous conduire à la découverte de nouveaux agents anti tumoraux. Ainsi, deux séries de composés pyrrolidiniques (O-arylmethyl substitué et C-arylmethyl substitué) ont pu être envisagés et synthétisés (Chapitre 1). Ces analogues ont montré d’excellentes activités cytotoxiques contre diverses cellules cancéreuses humaines (prostate, colon, sein, pancréas et leucémie), plus particulièrement les analogues actifs qui ne peuvent pas être phosphorylés par SphK, présentent un plus grand potentiel pour le traitement du cancer sans effet secondaire comme la bradycardie. Les études mécanistiques suggèrent que ces analogues de déclencheurs de régulation négative sur les transporteurs de nutriments induisent une crise bioénergétique en affamant les cellules cancéreuses. Afin d’approfondir nos connaissances sur les récepteurs cibles, nous avons conçu et synthétisé des sondes diazirine basées sur le marquage d’affinité aux photons (méthode PAL: Photo-Affinity Labeling) (Chapitre 2). En s’appuyant sur la méthode PAL, il est possible de récolter des informations sur les récepteurs cibles à travers l’analyse LC/MS/MS de la protéine. Ces tests sont en cours et les résultats sont prometteurs. Deuxième partie: Coordination métallique et catalyse di fonctionnelle de dérivés β-hydroxy cétones tertiaires. Les réactions de Barbier et de Grignard sont des méthodes classiques pour former des liaisons carbone-carbone, et généralement utilisées pour la préparation d’alcools secondaires et tertiaires. En vue d’améliorer la réaction de Grignard avec le 1-iodobutane dans les conditions « one-pot » de Barbier, nous avons obtenu comme produit majoritaire la β-hydroxy cétone provenant de l’auto aldolisation de la 5-hexen-2-one, plutôt que le produit attendu d’addition de l’alcool (Chapitre 3). La formation inattendue de la β-hydroxy cétone a également été observée en utilisant d’autres dérivés méthyl cétone. Étonnement dans la réaction intramoléculaire d’une tricétone, connue pour former la cétone Hajos-Parrish, le produit majoritaire est rarement la β-hydroxy cétone présentant la fonction alcool en position axiale. Intrigué par ces résultats et après l’étude systématique des conditions de réaction, nous avons développé deux nouvelles méthodes à travers la synthèse sélective et catalytique de β-hydroxy cétones spécifiques par cyclisation intramoléculaire avec des rendements élevés (Chapitre 4). La réaction peut être catalysée soit par une base adaptée et du bromure de lithium comme additif en passant par un état de transition coordonné au lithium, ou bien soit à l’aide d’un catalyseur TBD di fonctionnel, via un état de transition médiée par une coordination bidenté au TBD. Les mécanismes proposés ont été corroborés par calcul DFT. Ces réactions catalytiques ont également été appliquées à d’autres substrats comme les tricétones et les dicétones. Bien que les efforts préliminaires afin d’obtenir une enantioselectivité se sont révélés sans succès, la synthèse et la recherche de nouveaux catalyseurs chiraux sont en cours.

Réaction d’amination intramoléculaire de liens C-H à partir de N-mésyloxycarbamates catalysée par des complexes de rhodium et d’autres métaux de transition : s ynthèse verte d’oxazolidinones

La réaction d’amination de liens C-H, impliquant la transformation directe d’un lien C-H en lien C-N constitue une approche synthétique d’avenir pour la préparation de composés azotés. L’application de cette stratégie de manière intramoléculaire apparaît comme une approche puissante pour la synthèse de composés hétérocycliques. En particulier, les oxazolidinones, carbamates cycliques à cinq chaînons, constituant une nouvelle classe d’antibiotiques très prometteuse, pourraient être synthétisées par cette méthode. Il y a moins d’une dizaine d’années, notre groupe de recherche a travaillé sur le développement de méthodologies utilisant des espèces nitrènes métalliques pour l’amination intra et intermoléculaire. Les N-tosyloxycarbamates, en présence d’une base et d’un catalyseur dimère de rhodium (II) tétracarboxylate sont les précurseurs de ces espèces nitrènes métalliques, capables de faire l’insertion de liens C(sp3)-H. Dans ces travaux de thèse, nous avons travaillé sur le développement d’une méthode plus « verte » d’amination intramoléculaire. Les N-mésyloxycarbamates, plus légers que leurs homologues N-tosyloxycarbamates, ont été identifiés comme d’excellents précurseurs de nitrènes. La méthodologie développée ne nécessite que 3 mol % de dimère de rhodium Rh2(tpa)4 et de 1,5 équivalents de solution aqueuse saturée de K2CO3, le tout dans l’acétate d’éthyle et donne de bons rendements de cyclisation. Une étude de l’étendue réactionnelle a été effectuée, montrant la tolérance et les limitations de notre système catalytique : les hétéroatomes ne posent pas de problèmes hormis l’atome d’azote, qui doit être protégé afin de garantir la transformation. En outre, nous avons constaté que les liens C-H aliphatiques secondaires sont moins réactifs que les liens tertiaires. Après avoir tenté de développer des conditions réactionnelles spécifiques aux liens C-H non activés, nous avons montré la possibilité d’aminer des liens C-H propargyliques de manière chimiosélective ; la triple liaison C-C peut ensuite être dérivatisée efficacement, donnant accès à la formule saturée correspondante ainsi qu’à d’autres motifs. Dans un désir de substituer les complexes de rhodium par d’autres complexes de métaux plus abondants et moins dispendieux, nous nous sommes tournés, dans un premier temps, vers les complexes de fer et par la suite, vers les pinceurs de nickel. Les phtalocyanines de fer ont été identifiées comme étant de bons catalyseurs de l’amination intramoléculaire de N-mésyloxycarbamates. Le chlorure de phtalocyanine de fer (III), en présence d’un sel de AgBF4 et de K2CO3, dans le 1,1,2,2-tétrachloroéthane anhydre, permet l’obtention de la 4-phenyloxazolidin-2-one avec 63% de rendement. En outre, il est possible d’atteindre un rendement de 49% à partir du même substrat N-mésyloxycarbamate, par catalyse avec un pinceur de nickel de type POCN, en présence d’un sel de mésylate. Des indices sur le mécanisme des ces deux transformations ont pu être recueillis lors de la courte étude de ces systèmes.