Comparison of uniform amplitude beam and intercepted Gaussian beam superresolution theories

The general superresolution theories for uniform amplitude beams and intercepted Gaussian beams are investigated. For these two types of incident beam, both two-zone amplitude and pure-phase filters are adopted to provide specific numerical descriptions of their differences in superresolution performances. Simulated results of comparisons between their performances indicate that, with the same spot size ratio, the intercepted Gaussian beam achieves a higher central image brightness ratio and significantly lower side-lobe effect irrespective of the filter used. (c) 2008 Elsevier Ltd. All rights reserved.

Output beam quality of edge pumped planar waveguide lasers with confocal unstable resonators

Output beam quality of edge pumped planar waveguide lasers with confocal unstable resonators is investigated by diffraction methods, taking into account gain saturation, asymmetric pumping, and beam interaction. The influences of pumping uniformity, doping concentration, cavity length and effective Fresnel number are analyzed with respect to output beam quality and pumping efficiency. It is found that good beam quality and high efficiency can be obtained with asymmetric pumping and optimized negative branch confocal unstable resonators. (c) 2005 The Optical Society of Japan.

High power coherent beam combination from two fiber lasers

Phase locking of two fiber lasers is demonstrated experimentally by the use of a self-imaging resonator with a spatial filter. The high-contrast interference strips of the coherent beam profile are observed. The coherent output power of the fiber array exceeds 12W and the efficiency of coherent power combination is 88% with pump power of 60W. The whole system operates quite stably and, for the spatial filter, no thermal effects have been observed, which means that we can increase the coherent output power further by this method. (c) 2006 Optical Society of America

Nd-glass belt lasers with improved beam quality

Nd-doped phosphate glass belt lasers pumped by laser diodes are demonstrated. The Nd-glass belt with a large cross-section and a small Fresnel number is air-cooled to provide around 18-W continuous wave (CW) output power with a beam quality factor of My2

Propagation properties of off-axis Hermite-cosh-Gaussian beam combinations through a first-order optical system

Based on the Collins integral formula, the analytic expressions of propagation of the coherent and the incoherent off-axis Hermite-cosh-Gaussian (HChG) beam combinations with rectangular symmetry passing through a paraxial first-order optical system are derived, and corresponding numerical examples are given and analysed. The resulting beam quality is discussed in terms of power in the bucket (PIB). The study suggests that the resulting beam cannot keep the initial intensity shape during the propagation and the beam quality for coherent mode is not always better than that for incoherent mode. Reviewing the numerical simulations of Gaussian, Hermite-Gaussian (HG) and cosh Gaussian (ChG) beam combinations indicates that the Hermite polynomial exerts a chief influence on the irradiance profile of composite beam and far field power concentration.

Coupling efficiency of laser beam to multimode fiber

The coupling efficiency of laser beam to multimode fiber is given by geometrical optics, and the relation between the maximum coupling efficiency and the beam propagation factor M-2 is analyzed. An equivalent factor M-F(2) for the multimode fiber is introduced to characterize the fiber coupling capability. The coupling efficiency of laser beam to multimode fiber is calculated in respect of the ratio M-2/M-F(2) by the overlapping integral theory. The optimal coupling efficiency can be roughly estimated by the ratio of M-2 to M-F(2) but with a large error range. The deviation comes from the lacks of information on the detail of phase and intensity profile in the beam factor M-2. (C) 2007 Elsevier B.V. All rights reserved.

Beam quality improvement of laser diode array by using off-axis external cavity

A novel off-axis external cavity is designed for laser diode array to improve the beam quality. In this external cavity, a circle aperture with variable size is used as a spatial filter. The diameter of aperture is optimized to 1.2mm and the off-axis angle of external cavity is optimized at 2.6 deg. In the optimal case, the beam parameter product (BPP) of laser diode array is reduced to 121 mm. mrad from 1050 mm. mrad with external cavity optical efficiency of 81%. (C) 2007 Optical Society of America.

Beam combination of a radial laser array: Flat-topped beam

An analytical expression of a radial laser array for flat-topped beam is derived based on the generalized Collins formula. The intensity distribution of the resulting beam focused by a lens at the focus plane, for phase-locked and nonphase-locked cases, is studied numerically. The effect of the Fresnel number and normalized radius on intensity distribution for phase-locked and nonphase-locked cases is also presented. It is found that intensity distribution for nonphase-locked case is much less sensible to the Fresnel number and normalized radius than that of phase-locked case. (C) 2008 Elsevier Ltd. All rights reserved.

Beam conditions for radiation generated by an electromagnetic J 0-correlated Schell-model source

Based on the 2 x 2 (electric field) cross-spectral density matrix, a model for an electromagnetic J(0)-correlated Schell-model beam is given that is a generalization of the scalar J(0)-correlated Schell-model beam. The conditions that the matrix for the source to generate an electromagnetic J(0)-correlated Schell-model beam are obtained. The condition for the source to generate a scalar J(0)-correlated Schell-model beam can be considered as a special case. (C) 2008 Optical Society of America

Beam collimation of high-power laser diode array with graded-index fiber lens array

Graded-index (GRIN) fiber lens arrays are fabricated from commercial GRIN fibers to collimate a high-power laser diode array. The beam divergence angles are reduced to 4.2 and 14.7 mrad in the fast and slow axes, respectively. The influences of smile and fluctuation in fiber length are discussed. Using an aspherical focal lens system, about 74% power can be launched into a fiber with a numerical aperture (NA) of 0.22 and a core diameter of 400 mu m. (c) 2008 Society of Photo-Optical Instrumentation Engineers.

Análise comparativa dos instrumentos de gestão em Unidades de Conservação visando a gestão participativa no Cone Sul

A influência humana sobre as unidades de conservação (UCs) deve ser considerada a partir de modelos mais amplos, entendendo que há influência dos processos sociais nas mesmas e que essa é uma dimensão a ser discutida no âmbito das práticas de proteção da natureza. É importante que seja levado em consideração na criação, na ampliação e na gestão de uma UC a participação dos atores envolvidos direta e indiretamente, já que o quadro mundial indica ser uma tendência a criação de novas áreas e o envolvimento da sociedade neste processo. Ante esta realidade objetivou-se, nesta tese, contribuir para o fortalecimento da gestão participativa em UCs no Cone Sul, aqui definido como o conjunto de quatro países: Brasil, Argentina, Uruguai e Chile e tendo como estudo de caso quatro áreas protegidas: Parque Nacional do Itatiaia - Brasil, Parque Nacional Lago Puelo - Argentina, Santuário da Natureza Parque Pumalín - Chile e Paisagem Protegida Lagoa de Rocha Uruguai. Tendo por base os instrumentos de gestão em unidades de conservação no Brasil: plano de manejo, zona de amortecimento, educação ambiental e conselho gestor e sendo os mesmos determinados por normas legais (Leis, Decretos, Resoluções, Instruções Normativas) tais normas foram analisadas e comparadas com a finalidade de averiguar se nos países estudados estes instrumentos eram determinados legalmente, da mesma forma como são no Brasil, bem como se a vertente participativa estava presente nesta determinação. Após verificou-se se na Argentina, no Uruguai e no Chile havia a aplicação dos mesmos instrumentos de gestão em áreas protegidas que no Brasil; bem como foi averiguada a situação dos mesmos nos estudos de caso tendo por base a vertente participativa. Depois houve a contextualização e apresentação das dificuldades na gestão e das pressões sofridas pelas áreas protegidas buscando trazer à tona a realidade em que estão inseridas e das quais compartilham. Para tanto se utilizou de levantamentos bibliográficos, documentais, entrevistas semi-estruturadas com pessoas que tiveram experiências práticas com o problema pesquisado e os estudos de caso. Constatou-se que a determinação legal de instrumentos que propiciem a participação não é, via de regra, essencial para efetivar a gestão participativa da UC, mas a existência dos mesmos sim. Verificou-se que um bom resultado está atrelado às qualidades técnicas e subjetivas da gestão e também dos gestores, que podem ajudar e muito na gestão participativa, juntamente com uma parceria bem fortalecida.