The water balance on sloping land in rainfed lowland rice ecosystem

Quantifying water losses in paddy fields assists estimation of water availability in rainfed lowland rice ecosystem. There is, however, no definite method for determining the water losses, and little information is available on water balance in different toposequence positions of a sloped rainfed lowland. Therefore, the aim of this work was to quantify percolation and the lateral water flow with special reference to the toposequential variation. Data used for the analysis was collected in Laos and northeast Thailand. Percolation and water tables were measured on a daily basis. The percolator is a steel cylindrical tube with a lid to prevent water loss from evapotranspiration. The water table meter is a short PVC tube for determination of perched water table and a long PVC tube for groundwater table, and the side is perforated with 5-mm diameter holes at 20-mm distance. Percolation rate was determined using linear regression analysis of cumulative percolation. Assuming that the total amount of evaporation and transpiration was equivalent to potential evapotranspiration, the lateral water flow was estimated using the water balance equation. Our results are in agreement with the previously reported findings, and the methodology of estimating water balance components appears reasonably acceptable. With regard to the toposequential variation, the higher position in the topoesquence, the greater potential of the water losses because of higher percolation and lateral flow rates.

Long-distance signaling in nodulation directed by a CLAVATA1-like receptor kinase

Proliferation of legume nodule primordia is controlled by shoot-root signaling known as autoregulation of nodulation (AON). Mutants defective in AON show supernodulation and increased numbers of lateral roots. Here, we demonstrate that AON in soybean is controlled by the receptor-like protein kinase GmNARK (Glycine max nodule autoregulation receptor kinase), similar to Arabidopsis CLAVATA1 (CLV1). Whereas CLV1 functions in a protein complex controlling stem cell proliferation by short-distance signaling in shoot apices, GmNARK expression in the leaf has a major role in long-distance communication with nodule and lateral root primordia.

AVALIAÇÃO DAS ALTERAÇÕES TRANSVERSAIS, ÂNTEROPOSTERIORES E VERTICAIS DA MAXILA EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente trabalho teve por finalidade avaliar as alterações produzidas nos arcos dentárias superiores de pacientes submetidos à expansão rápida da maxila por meio de disjunção da sutura palatina mediana assistida cirurgicamente ERM-AC. A amostra utilizada para a realização deste estudo foi composta de 34 pares de modelos de gesso de 17 pacientes, sendo 6 do sexo masculino e 11 do sexo feminino. Para cada paciente foram preparados 2 pares de modelos obtidos em diferentes fases: inicial ,antes do procedimento operatório (T1) e três meses após o travamento do parafuso expansor (T2). O dispositivo expansor utilizado nesta amostra foi o disjuntor tipo Hyrax. O procedimento cirúrgico adotado foi a osteotomia nas paredes laterais da maxila sem o envolvimento da lâmina pterigóide, osteotomia da espinha nasal à linha média dental (incisivos centrais anteriores), separação da sutura palatina mediana por meio de cinzel e separação do septo nasal. O início da ativação ocorreu no 3o dia pós operatório sendo ¼ pela manhã e ¼ à noite, as ativações seguiram critérios clínicos para o controle da expansão. As medidas foram realizadas por meio da máquina de medição tridimensional (SAC) baseado nas alterações nos três planos vertical, sagital e transversal que ocorreram nos modelos de gesso. Os resultados mostraram que houve uma expansão estatisticamente significante na região dos caninos, primeiros prémolares, primeiros molares e segundos molares, respectivamente 6,03mm, 9,82mm, 8,66mm, 9,72mm e 5,67mm. As distâncias obtidas entre os incisivos centrais e laterais não se mostraram estatisticamente significantes, os valores obtidos foram respectivamente: 0,40mm e 4,12mm. As inclinações das coroas dentais para vestibular mostraram um comportamento assimétrico, pois nos primeiros molares os valores encontrados foram 6,890 (lado direito) e 9,560 (lado esquerdo) e para os primeiros prémolares os valores obtidos foram 3,260 para o lado direito (estatisticamente não significante) e 4,740 para o lado esquerdo. Avaliando a variável comprimento do arco maxilar, foi observada uma diminuição média entre os intervalos analisados T1 28,20 mm e T2 26,56 mm variando 1,64mm. Podemos concluir que a ERM-AC produziu uma expansão maxilar com inclinação vestibular da coroas dos dentes posteriores e diminuição no comprimento do arco maxilar, as outras variáveis analisadas não mostraram alterações estatisticamente significantes nos intervalos medidos.

ESTUDO COMPARATIVO ENTRE A ANÁLISE FACIAL SUBJETIVA E ANÁLISE CEFALOMÉTRICA DE TECIDOS MOLES NO DIAGNÓSTICO ORTODÔNTICO

O propósito deste estudo foi avaliar a concordância entre a Análise facial subjetiva, proposta por CAPELOZZA FILHO e a Análise Cefalométrica de Tecidos Moles, de ARNETT; McLAUGHLIN. Fotografias de frente e de perfil e telerradiografias em norma lateral padronizadas, de 50 indivíduos, com média de idade de 24 anos e 1 mês foram utilizadas para a avaliação. Verificou-se também nos indivíduos classificados como Padrão I, a correspondência dos valores médios e dos desvios-padrão das medidas obtidas, com os valores normativos da Análise Cefalométrica dos Tecidos Moles para os indivíd uos com harmonia facial. Constatou-se em indivíduos do Padrão I que os lábios sempre se encontram à frente da Linha Vertical Verdadeira, e que apesar de grandes variações do ponto pogônio, ainda é mantido o equilíbrio facial. Os resultados demonstraram que a Análise facial subjetiva eficiente na classificação do padrão facial.

Avaliação das inclinações dentárias obtidas no tratamento ortodôntico com bráquetes autoligados utilizando tomografia computadorizada

O objetivo deste trabalho foi analisar a expressão dos torques dentários em pacientes tratados com aparelhos ortodônticos fixos com bráquetes autoligados, utilizando tomografias computadorizadas. Para este estudo, foi selecionada uma amostra clínica de 10 pacientes, seguindo como critérios de inclusão, indivíduos que apresentavam dentição permanente e todos os dentes presentes, com apinhamento superior ou igual a 4 mm, tratados sem extração. Todos os pacientes foram tratados na clínica da pós-graduação em Ortodontia da Universidade Metodista de São Paulo, utilizando-se bráquetes autoligados Damon 2 ORMCO na prescrição padrão. Foram realizadas medições das inclinações dos dentes anteriores, de canino a canino, superiores e inferiores, realizadas por meio de imagens tomográficas obtidas em um tomógrafo computadorizado volumétrico NewTom, em seu modelo DVT-9000 (NIM Verona - Itália), obtidas em dois tempos: antes do início do tratamento ortodôntico (denominado de T1) e depois do tratamento ortodôntico, após a inserção do último fio de nivelamento, de calibre 0,019 x 0,025 de aço inoxidável(denominado de T2). Para auxílio destas mensurações, foi utilizado o software QR-DVT 9000 e após análise dos resultados foram aplicados testes estatíscos (testes "t" pareado e Dalberg) e observou-se que as inclinações dos dentes do segmento anterior aumentaram, principalmente, nos caninos e incisivos laterais superiores, incisivos centrais e laterais inferiores. Os dentes apresentaram valores de inclinação diferentes da prescrição, tanto no início quanto no final do tratamento, denotando a incapacidade do fio 0,019 x 0,025 de aço inoxidável em reproduzir os torques indicados na prescrição padrão utilizada neste presente estudo.(AU)

AVALIAÇÃO DAS ALTERAÇÕES DO SORRISO EM INDIVÍDUOS SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA

O objetivo deste estudo foi avaliar as possíveis alterações das características horizontais, verticais, de simetria e do arco do sorriso de pacientes com atresia maxilar submetidos à expansão rápida da maxila. A amostra consistiu de 81 fotografias extra-bucais do sorriso máximo de 27 pacientes com idade média de 10 anos e 3 meses. Foram realizadas fotografias do sorriso máximo nos períodos: inicial (antes da instalação do aparelho expansor); 3 meses após a fixação do parafuso expansor; 6 meses após a fixação do parafuso expansor. Para a calibragem e análise das fotografias foi utilizado o programa CEFX 2001 CDT. Os pontos fotométricos e as medidas a serem analisadas foram escolhidos após revisão da literatura do sorriso realizada. Para avaliar as alterações no sorriso durante as fases, foi utilizada a análise de variância ANOVA, com nível de significância de 5%. A expansão rápida da maxila promoveu aumento estatisticamente significante da dimensão transversal do sorriso; aumento da quantidade de exposição dos incisivos centrais e laterais superiores; manutenção da simetria entre os lados direito e esquerdo e da falta de paralelismo entre a curvatura das bordas dos incisivos superiores com a curvatura do lábio inferior (arco do sorriso).(AU)

A novel method for studying the cortical processing of human swallowing using Synthetic Aperture Magnetometry(SAM)

Background/Aims: Positron emission tomography has been applied to study cortical activation during human swallowing, but employs radio-isotopes precluding repeated experiments and has to be performed supine, making the task of swallowing difficult. Here we now describe Synthetic Aperture Magnetometry (SAM) as a novel method of localising and imaging the brain's neuronal activity from magnetoencephalographic (MEG) signals to study the cortical processing of human volitional swallowing in the more physiological prone position. Methods: In 3 healthy male volunteers (age 28–36), 151-channel whole cortex MEG (Omega-151, CTF Systems Inc.) was recorded whilst seated during the conditions of repeated volitional wet swallowing (5mls boluses at 0.2Hz) or rest. SAM analysis was then performed using varying spatial filters (5–60Hz) before co-registration with individual MRI brain images. Activation areas were then identified using standard sterotactic space neuro-anatomical maps. In one subject repeat studies were performed to confirm the initial study findings. Results: In all subjects, cortical activation maps for swallowing could be generated using SAM, the strongest activations being seen with 10–20Hz filter settings. The main cortical activations associated with swallowing were in: sensorimotor cortex (BA 3,4), insular cortex and lateral premotor cortex (BA 6,8). Of relevance, each cortical region displayed consistent inter-hemispheric asymmetry, to one or other hemisphere, this being different for each region and for each subject. Intra-subject comparisons of activation localisation and asymmetry showed impressive reproducibility. Conclusion: SAM analysis using MEG is an accurate, repeatable, and reproducible method for studying the brain processing of human swallowing in a more physiological manner and provides novel opportunities for future studies of the brain-gut axis in health and disease.

Clustering of Pick bodies in patients with Pick's disease

Clustering of Pick bodies (PB) was studied in the frontal and temporal lobe in 10 cases of Pick's disease (PD). Pick bodies exhibited clustering in 47/50 (94%) brain areas analysed. In 20/50 (40%) brain areas, PB were present in a single large cluster ≤ 6400 μm in diameter, in 27/50 (54%) PB occurred in smaller clusters (200-3200 μm in diameter) which exhibited a regular periodicity relative to the tissue boundary, in 1/50 (2%) there was a regular distribution of individual PB and in 2/50 (4%), PB were randomly distributed. Mean cluster size of the PB was greater in the dentate gyrus compared with the inferior temporal gyrus and lateral occipitotemporal gyrus. Mean cluster size of PB in a brain region was positively correlated with the mean density of PB. Hence, PB exhibit essentially the same spatial patterns as senile plaques and neurofibrillary tangles in Alzheimer's disease (AD) and Lewy bodies in Dementia with Lewy bodies (DLB).

Global optimisation of cold-formed steel sections

In this thesis, standard algorithms are used to carry out the optimisation of cold-formed steel purlins such as zed, channel and sigma sections, which are assumed to be simply supported and subjected to a gravity load. For zed, channel and sigma section, the local buckling, distortional buckling and lateral-torsional buckling are considered respectively herein. Currently, the local buckling is based on the BS 5950-5:1998 and EN 1993-1-3:2006. The distortional buckling is calculated by the direct strength method employing the elastic distortional buckling which is calculated by three available approaches such as Hancock (1995), Schafer and Pekoz (1998), Yu (2005). In the optimisation program, the lateral-torsional buckling based on BS 5950-5:1998, AISI and analytical model of Li (2004) are investigated. For the optimisation program, the programming codes are written for optimisation of channel, zed and sigma beam. The full study has been coded into a computer-based analysis program (MATLAB).

The size frequency distributions of beta-amyloid deposit subtypes in Alzheimer's disease

The size frequency distributions of diffuse, primitive and classic beta/A4 deposits was studied in single sections in the hippocampus, parahippocampal gyrus (PHG) and lateral occipitotemporal gyrus (LOT) in five cases of Alzheimer's disease. In most brain regions, the size distribution of the diffuse deposits was significantly different from that of the primitive and classic deposits. The data suggested that larger diffuse deposits appeared to be converted less often into primitive and classic deposits. Significant differences in the size distribution of primitive deposits were commonly observed between brain regions in which there was no difference in the size distribution of the diffuse deposits. Hence, local brain factors may influence the size of diffuse deposit which can be converted into mature amyloid deposit.

Mobility of NMDA autoreceptors but not postsynaptic receptors at glutamate synapses in the rat entorhinal cortex

NMDA receptors (NMDAr) are known to undergo recycling and lateral diffusion in postsynaptic spines and dendrites. However, NMDAr are also present as autoreceptors on glutamate terminals, where they act to facilitate glutamate release, but it is not known whether these receptors are also mobile. We have used functional pharmacological approaches to examine whether NMDA receptors at excitatory synapses in the rat entorhinal cortex are mobile at either postsynaptic sites or in presynaptic terminals. When NMDAr-mediated evoked EPSCs (eEPSCs) were blocked by MK-801, they showed no evidence of recovery when the irreversible blocker was removed, suggesting that postsynaptic NMDAr were relatively stably anchored at these synapses. However, using frequency-dependent facilitation of AMPA receptor (AMPAr)-mediated eEPSCs as a reporter of presynaptic NMDAr activity, we found that when facilitation was blocked with MK-801 there was a rapid (similar to 30-40 min) anomalous recovery upon removal of the antagonist. This was not observed when global NMDAr blockade was induced by combined perfusion with MK-801 and NMDA. Anomalous recovery was accompanied by an increase in frequency of spontaneous EPSCs, and a variable increase in frequency-facilitation. Following recovery from blockade of presynaptic NMDAr with a competitive antagonist, frequency-dependent facilitation of AMPAr-mediated eEPSCs was also transiently enhanced. Finally, an increase in frequency of miniature EPSCs induced by NMDA was succeeded by a persistent decrease. Our data provide the first evidence for mobility of NMDAr in the presynaptic terminals, and may point to a role of this process in activity-dependent control of glutamate release.

Anterior ophthalmic imaging

Improvements in imaging chips and computer processing power have brought major advances in imaging of the anterior eye. Digitally captured images can be visualised immediately and can be stored and retrieved easily. Anterior ocular imaging techniques using slitlamp biomicroscopy, corneal topography, confocal microscopy, optical coherence tomography (OCT), ultrasonic biomicroscopy, computerised tomography (CT) and magnetic resonance imaging (MRI) are reviewed. Conventional photographic imaging can be used to quantify corneal topography, corneal thickness and transparency, anterior chamber depth and lateral angle and crystalline lens position, curvature, thickness and transparency. Additionally, the effects of tumours, foreign bodies and trauma can be localised, the corneal layers can be examined and the tear film thickness assessed. © 2006 The Authors.

Acute mobile phone operation affects neural function in humans

OBJECTIVES: Mobile phones (MP) are used extensively and yet little is known about the effects they may have on human physiology. There have been conflicting reports regarding the relation between MP use and the electroencephalogram (EEG). The present study suggests that this conflict may be due to methodological differences such as exposure durations, and tests whether exposure to an active MP affects EEG as a function of time. METHODS: Twenty-four subjects participated in a single-blind fully counterbalanced cross-over design, where both resting EEG and phase-locked neural responses to auditory stimuli were measured while a MP was either operating or turned off. RESULTS: MP exposure altered resting EEG, decreasing 1-4 Hz activity (right hemisphere sites), and increasing 8-12 Hz activity as a function of exposure duration (midline posterior sites). MP exposure also altered early phase-locked neural responses, attenuating the normal response decrement over time in the 4-8 Hz band, decreasing the response in the 1230 Hz band globally and as a function of time, and increasing midline frontal and lateral posterior responses in the 30-45 Hz band. CONCLUSIONS: Active MPs affect neural function in humans and do so as a function of exposure duration. The temporal nature of this effect may contribute to the lack of consistent results reported in the literature.

Desenvolvimento de um painel sanduíche com carga de particulado oriundo de resíduo lignocelulósico para aplicação em produtos na área de equipamentos de proteção

This work aims to study and investigate the use of a hybrid composite polymer formed with blanket aramid (Kevlar 29) fiber blanket flax fiber and particulate dry endocarp of coconut (Cocos nucifera Linn), using as matrix an epoxy resin based thermoset for use in areas of protective equipment. Besides such material is used an aluminum plate, joined to the composite by means of glue based on epoxy and araldite commercial. The manufacturing process adopted was manual lamination (Hand Lay Up) to manufacture the hybrid composite. After the composite is prepared, an aluminum plate is subjected to pressure and glued to cure the adhesive. Layers of veil will also be used to separate the particulate from the linen blanket layer without disturbing the alignment of the fibers of the blankets. To characterize the mechanical and physical behavior was manufactured a plate of 800 x 600 mm of the hybrid composite, which were removed specimens for tests of water absorption to saturation; density; impact test (Charpy) and two test specimens for ballistic testing 220 mm x 200 mm to make a comparative study between the dry state and saturated water absorption and thus see the ballistic performance of these two conditions. The test was applied to make a comparative study of fracture in these two conditions, caused by penetrating ballistic missile (38 and 380). To test the impact (Charpy) will analyze the absorbed energy, fracture appearance and lateral contraction, also in dry condition and saturation of absorbed water, thereby analyzing situations where the impact load is relevant, such as bumps and shocks produced by stone, metal or wooden bars among others. The proposed configuration, along with the tests, has the purpose, application in the fields of equipment against ballistic impact, such as helmets; bullet proof vests; shields; protective packaging and other items to be identified in this research.

Development of an instrumented customizable total knee prosthesis for experimental tests.

Total knee arthroplasty (TKA) has revolutionized the life of millions of patients and it is the most efficient treatment in cases of osteoarthritis. The increase in life expectancy has lowered the average age of the patient, which requires a more enduring and performing prosthesis. To improve the design of implants and satisfying the patient's needs, a deep understanding of the knee Biomechanics is needed. To overcome the uncertainties of numerical models, recently instrumented knee prostheses are spreading. The aim of the thesis was to design and manifacture a new prototype of instrumented implant, able to measure kinetics and kinematics (in terms of medial and lateral forces and patellofemoral forces) of different interchangeable designs of prosthesis during experiments tests within a research laboratory, on robotic knee simulator. Unlike previous prototypes it was not aimed for industrial applications, but purely focusing on research. After a careful study of the literature, and a preliminary analytic study, the device was created modifying the structure of a commercial prosthesis and transforming it in a load cell. For monitoring the kinematics of the femoral component a three-layers, piezoelettric position sensor was manifactured using a Velostat foil. This sensor has responded well to pilot test. Once completed, such device can be used to validate existing numerical models of the knee and of TKA and create new ones, more accurate.It can lead to refinement of surgical techniques, to enhancement of prosthetic designs and, once validated, and if properly modified, it can be used also intraoperatively.