Natural fibers based composites - Technical and social issues

Brazil is the only country in South America to have an automotive supplier sector based on natural fibers. New opportunities are arising due to an increase demand by the car makers in applying natural fibers in their parts. Several crop fibers have been developed in Brazil. Among them can be listed caroa, piacava, pupunha, mutum and others of regional application. For the automotive industry, which requires large quantities with uniform quality, the alternatives are sisal (170,000 ton/yr), curaua (150 ton/yr in 2003), malva, 200 ton/yr; Brazil is the single largest producer country of sisal, and commercially, the only one in curaua. For South America, the alternatives are fique in Colombia, abaca in equator, flax in Argentina and curaua in Venezuela. It must be understood by the target countries of drugs, is that crop fiber can be an economic alternative to coca in the Andes region, therefore an instrument of land reform and drug reduction plantations. Several companies have a strong program of apply natural fibers based components in their products: Volkswagen do Brazil, DaimlerChrysler, General Motors do Brazil. Among their suppliers can be listed companies such Pematec (curaua), Toro (sisal, coir and jute), Incomer (sisal and jute), Ober (jute, curaua), Indaru (jute and sisal), Antolin (imported kenaf,) Tapetes Sao Carlos (sisal), Poematec (coir) and Art-Gore, with Woodstock'' wood and natural fibers). Figures about production and demand are discussed in the paper.

Efficacy of Sakacin on Selected Food Pathogenic Microorganisms Isolated from Fermented Milk Products

The efficacy of sakacin on selected food pathogenic microorganisms isolated from fermented milk products was investigated. The L. sake was isolated using the pour plate technique and was characterized based on it colony, cell morphology and some biochemical tests. This isolate was identified using standard scheme. The L. sake FCF 33 was propagated in De Man Rogosa Sharpe (MRS) broth for bacteriocin (sakacin) production. The sakacin had inhibitory effects on all test microorganisms (ranging from +5mm to +6mm) except Shigella dysenteriae N11, Salmonella typhimurium N8, Klebsiella ozaenae W24 and Proteus mirabilis N16a). Bacteriocins are antimicrobial substances of lactic acid bacteria (LAB) have gained tremendous attention as potential bio preservatives in the food and dairy industries. The LAB can serve as probiotics, which are products aimed at delivering living, potentially beneficial bacterial cells to the gut ecosystem of humans and other animals.

Dynamic mental representations of habitual behaviours: Food choice on a web-based environment

Aim: Rather than being rigid, habitual behaviours may be determined by dynamic mental representations that can adapt to context changes. This adaptive potential may result from particular conditions dependent on the interaction between two sources of mental constructs activation: perceived context applicability and cognitive accessibility . Method: T wo web-shopping simulations of fering the choice between habitually chosen and non-habitually chosen food products were presented to participants. This considered two choice contexts dif fering in the habitual behaviour perceived applicability (low vs. high) and a measure of habitual behaviour chronicity . Results: Study 1 demonstrated a perceived applicability ef fect, with more habitual (non-organic) than non-habitual (organic) food products chosen in a high perceived applicability (familiar) than in a low perceived applicability (new) context. The adaptive potential of habitual behaviour was evident in the habitual products choice consistency across three successive choices, despite the decrease in perceived applicability . Study 2 evidenced the adaptive potential in strong habitual behaviour participants – high chronic accessibility – who chose a habitual product (milk) more than a non-habitual product (orange juice), even when perceived applicability was reduced (new context). Conclusion: Results portray consumers as adaptive decision makers that can flexibly cope with changes in their (inner and outer) choice contexts.

Selection of optimal operating conditions based on minimum energy consumption for an acrylonitrile recovery unit

The selection of the optimal operating conditions for an industrial acrylonitrile recovery unit was conducted by the systematic application of the response surface methodology, based on the minimum energy consumption and products specifications as process constraints. Unit models and plant simulation were validated against operating data and information. A sensitivity analysis was carried out in order to identify the set of parameters that strongly affect the trajectories of the system while keeping products specifications. The results suggest that energy savings of up to 10% are possible by systematically adjusting operating conditions.

What Transaction Costs are Acceptable in Life Insurance Products from the Policyholders' Viewpoint?

Purpose - The purpose of this paper is to analyze what transaction costs are acceptable for customers in different investments. In this study, two life insurance contracts, a mutual fund and a risk-free investment, as alternative investment forms are considered. The first two products under scrutiny are a life insurance investment with a point-to-point capital guarantee and a participating contract with an annual interest rate guarantee and participation in the insurer's surplus. The policyholder assesses the various investment opportunities using different utility measures. For selected types of risk profiles, the utility position and the investor's preference for the various investments are assessed. Based on this analysis, the authors study which cost levels can make all of the products equally rewarding for the investor. Design/methodology/approach - The paper notes the risk-neutral valuation calibration using empirical data utility and performance measurement dynamics underlying: geometric Brownian motion numerical examples via Monte Carlo simulation. Findings - In the first step, the financial performance of the various saving opportunities under different assumptions of the investor's utility measurement is studied. In the second step, the authors calculate the level of transaction costs that are allowed in the various products to make all of the investment opportunities equally rewarding from the investor's point of view. A comparison of these results with transaction costs that are common in the market shows that insurance companies must be careful with respect to the level of transaction costs that they pass on to their customers to provide attractive payoff distributions. Originality/value - To the best of the authors' knowledge, their research question - i.e. which transaction costs for life insurance products would be acceptable from the customer's point of view - has not been studied in the above described context so far.

Digestibility of different wheat products in white shrimp Litopenaeus vannamei juveniles

Dry matter, energy, crude protein and amino acid apparent digestibility coefficients (ADCs) were determined in white shrimp juveniles for six wheat products: hard red winter whole grain meal (HWG), Rayon whole grain meal (RWG), Durum whole grain meal (DWG), hard red winter clear flour (HCF), mixed wheat 2nd clear flour (MCF) and semolina (S). The test diets included 30% of the test ingredients and 70% of a ground commercial diet supplemented with 1% chromic oxide and 1% sodium alginate. Amino acid contents in the ingredients, diets and feces were analyzed, and digestibility was determined by difference in order to minimize the impact of endogenous amino acid losses; crude protein and amino acids ADCswere adjusted for dietary preprandial losses in seawater. In general, nutrients digestibility was far higher in the wheat products than in the fish meal-based reference diet. Drymatter and crude proteinADCswere not statistically different amongwheat products (from84 to 96% and from88 to 107% respectively). Energy ADCs were significantly higher for clear flours (96% for HCF and MCF) than forwhole grainmeals and S (from83 to 86%). Total amino acids (TAA) and essentialamino acids (EAA) ADCs, once adjusted for preprandial leaching fromthe experimental diets, ranged from81 to 89% and from 58 to 81% respectively, and were statistically comparable among wheat products. Low Thr ADCs appear as a common feature of the amino acids digestibility profiles for whole grain meals, clear flours, or semolina.

A MARKET-BASED APPROACH TO 3D PRINTING FOR ECONOMIC DEVELOPMENT IN GHANA

The purpose of this report is to create the foundation for further study of a market-based approach to 3D printing as an instrument for economic development in Ghana. The delivery of improved products and services to the most underserved markets is needed to spur economic activity and improve standards of living. The relationship between economic development and the advancement of technology is considered within the context of Ghana. An opportunity for market entry exists within both the bottom of the economic pyramid and the mid-segment market. 3D printing (additive manufacturing) has proven to be a disruptive technology that has demonstrated an ability to expedite the speed of innovations and create products that were previously not possible. An investigation of how 3D printers can be used to create improved products for the most underserved markets within Ghana is presented. Questions are asked to elucidate how and when adoption of 3D printers and 3D printed products may occur in the future. Based upon the existing barriers to adoption, 3D printing technology must improve before widespread adoption will occur in Ghana.

Physics-Based Modeling of Power System Components for the Evaluation of Low-Frequency Radiated Electromagnetic Fields

The low-frequency electromagnetic compatibility (EMC) is an increasingly important aspect in the design of practical systems to ensure the functional safety and reliability of complex products. The opportunities for using numerical techniques to predict and analyze system’s EMC are therefore of considerable interest in many industries. As the first phase of study, a proper model, including all the details of the component, was required. Therefore, the advances in EMC modeling were studied with classifying analytical and numerical models. The selected model was finite element (FE) modeling, coupled with the distributed network method, to generate the model of the converter’s components and obtain the frequency behavioral model of the converter. The method has the ability to reveal the behavior of parasitic elements and higher resonances, which have critical impacts in studying EMI problems. For the EMC and signature studies of the machine drives, the equivalent source modeling was studied. Considering the details of the multi-machine environment, including actual models, some innovation in equivalent source modeling was performed to decrease the simulation time dramatically. Several models were designed in this study and the voltage current cube model and wire model have the best result. The GA-based PSO method is used as the optimization process. Superposition and suppression of the fields in coupling the components were also studied and verified. The simulation time of the equivalent model is 80-100 times lower than the detailed model. All tests were verified experimentally. As the application of EMC and signature study, the fault diagnosis and condition monitoring of an induction motor drive was developed using radiated fields. In addition to experimental tests, the 3DFE analysis was coupled with circuit-based software to implement the incipient fault cases. The identification was implemented using ANN for seventy various faulty cases. The simulation results were verified experimentally. Finally, the identification of the types of power components were implemented. The results show that it is possible to identify the type of components, as well as the faulty components, by comparing the amplitudes of their stray field harmonics. The identification using the stray fields is nondestructive and can be used for the setups that cannot go offline and be dismantled

Microfluidics based manufacture of liposomes simultaneously entrapping hydrophilic and lipophilic drugs

Despite the substantial body of research investigating the use of liposomes, niosomes and other bilayer vesicles for drug delivery, the translation of these systems into licensed products remains limited. Indeed, recent shortages in the supply of liposomal products demonstrate the need for new scalable production methods for liposomes. Therefore, the aim of our research has been to consider the application of microfluidics in the manufacture of liposomes containing either or both a water soluble and a lipid soluble drug to promote co-delivery of drugs. For the first time, we demonstrate the entrapment of a hydrophilic and a lipophilic drug (metformin and glipizide respectively) both individually, and in combination, using a scalable microfluidics manufacturing system. In terms of the operating parameters, the choice of solvents, lipid concentration and aqueous:solvent ratio all impact on liposome size with vesicle diameter ranging from ∼90 to 300 nm. In terms of drug loading, microfluidics production promoted high loading within ∼100 nm vesicles for both the water soluble drug (20–25% of initial amount added) and the bilayer embedded drug (40–42% of initial amount added) with co-loading of the drugs making no impact on entrapment efficacy. However, co-loading of glipizide and metformin within the same liposome formulation did impact on the drug release profiles; in both instances the presence of both drugs in the one formulation promoted faster (up to 2 fold) release compared to liposomes containing a single drug alone. Overall, these results demonstrate the application of microfluidics to prepare liposomal systems incorporating either or both an aqueous soluble drug and a bilayer loaded drug.

Introduction of African Swine Fever into the European Union through Illegal Importation of Pork and Pork Products

Transboundary animal diseases can have very severe socio-economic impacts when introduced into new regions. The history of disease incursions into the European Union suggests that initial outbreaks were often initiated by illegal importation of meat and derived products. The European Union would benefit from decision-support tools to evaluate the risk of disease introduction caused by illegal imports in order to inform its surveillance strategy. However, due to the difficulty in quantifying illegal movements of animal products, very few studies of this type have been conducted. Using African swine fever as an example, this work presents a novel risk assessment framework for disease introduction into the European Union through illegal importation of meat and products. It uses a semi-quantitative approach based on factors that likely influence the likelihood of release of contaminated smuggled meat and products, and subsequent exposure of the susceptible population. The results suggest that the European Union is at non-negligible risk of African swine fever.

Design of products to honor people post mortem

The cemeterial units, are places of social practices of everyday life and worship and the tomb where nostalgia can be externalized and the memory of the deceased revered. In Western societies we can find a category of artifacts meant to evoke the memory or honor the dead. In this paper we we mention three examples of products that enabled a reflection on the concepts that gave rise to their ways, and that risks to fit them into a new "material culture", in that it may have created a break with the traditional system codes and standards shared by companies, and its manifestations in relation to the physical creation of this category of products. This work offers a reflection on the Design Products.What probably makes it special is the field where it is located: the design of products in one post mortem memory. Usually made of granite rock or marble, have the form of plate or tablet, open book or rolled sheet. On one side have a photograph of the person who intend to honor and inscriptions. The thought of inherent design of this work put on one side the intricate set of emotions that this type of product can generate, and other components more affordable, and concerning the form, function and object interactions with users and with use environments. In the definition of the problem it was regarded as mandatory requirements: differentiation, added value and durability as key objectives.The first two should be manifested in the various components / product attributes. The aesthetic and material/structural durability of product necessarily imply the introduction of qualifying terms and quantitative weights, which positively influence the generation and evaluation of concepts based on the set of 10 principles for the project that originated a matrix as a tool to aid designing products. The concrete definition of a target audience was equally important. At this stage, the collaboration of other experts in the fields of psychology and sociology as disciplines with particular ability to understand individuals and social phenomena respectively was crucial. It was concluded that a product design to honor someone post mortem, should abandon the more traditional habits and customs to focus on identifying new audiences. Although at present it can be considered a niche market, it is believed that in the future may grow as well as their interest in this type of products.

Evaluation of physicochemical and glycaemic properties of commercial plant-based milk substitutes

The market for plant-based dairy-type products is growing as consumers replace bovine milk in their diet, for medical reasons or as a lifestyle choice. A screening of 17 different commercial plant-based milk substitutes based on different cereals, nuts and legumes was performed, including the evaluation of physicochemical and glycaemic properties. Half of the analysed samples had low or no protein contents (<0.5 %). Only samples based on soya showed considerable high protein contents, matching the value of cow’s milk (3.7 %). An in-vitro method was used to predict the glycaemic index. In general, the glycaemic index values ranged from 47 for bovine milk to 64 (almond-based) and up to 100 for rice-based samples. Most of the plant-based milk substitutes were highly unstable with separation rates up to 54.39 %/h. This study demonstrated that nutritional and physicochemical properties of plant-based milk substitutes are strongly dependent on the plant source, processing and fortification. Most products showed low nutritional qualities. Therefore, consumer awareness is important when plant-based milk substitutes are used as an alternative to cow’s milk in the diet.

Reductive dechlorination of TCE and cis-DCE by zero-valent iron and iron-based bimetallic reductants

CEs are the most frequently detected pollutants in groundwater. Several studies have been shown iron-based bimetallic reductants as a good method toward to chlorinated ethylenes degradation. However, many fundamental issues surrounding the chemistry of this phenomena remains elusive. In this study, kinetics and compound specific isotope analysis for reductive dechlorination of TCE and cis-DCE by unamended iron and iron-based bimetal reductants was evaluated. Generally, all the bimetals reductants tested revealed to increase the reactivity of the degradation, in which palladium and nickel were the additional metals more reactive. Ethene and ethane were the major products of TCE degradation. It is supported the simultaneous hydrogenolysis and β-elimination reaction hypothesis, however, the first step of TCE degradation by Au/Fe undergoes preferably by β-elimination, while by unamended iron, Pt/Fe and Co/Fe goes preferably by hydrogenolysis. No apparent elucidation was obtained to explain the high reactivity on bimetals systems; Degradação do TCE e cis-DCE por ferro de valência zero e redutores bimetálicos à base de ferro Resumo: Etilenos clorados são os poluentes mais frequentemente detetados na água subterrânea. Vários estudos têm mostrado que redutores bimetálicos à base de ferro são um bom método para a degradação dos etilenos clorados. Porém, muitas questões fundamentais acerca da química deste fenómeno permanecem elusivas. Neste estudo foi avaliada a cinética e a análise isotópica de compostos específicos para a degradação do TCE e cis-DCE por ferro e redutores bimetálicos à base de ferro. Genericamente, os redutores bimetálicos mostraram aumentar a reatividade da degradação, sendo paládio e níquel os metais adicionais mais reativos. Os produtos principais da degradação do TCE foram eteno e etano. É apoiada a hipótese da simultaneidade de hidrogenólise e β-eliminação, porém, o primeiro passo da degradação do TCE por Au/Fe é realizada preferencialmente por β-eliminação, enquanto por ferro, Pt/Fe e Co/Fe é realizada preferencialmente por hidrogenólise. Não houve uma elucidação aparente para explicar a reatividade nos sistemas bimetálicos.

Assessing the role of Mediterranean evergreen oaks canopy cover in land surface albedo and temperature using a remote sensing-based approach

Modifications in vegetation cover can have an impact on the climate through changes in biogeochemical and biogeophysical processes. In this paper, the tree canopy cover percentage of a savannah-like ecosystem (montado/dehesa) was estimated at Landsat pixel level for 2011, and the role of different canopy cover percentages on land surface albedo (LSA) and land surface temperature (LST) were analysed. A modelling procedure using a SGB machine-learning algorithm and Landsat 5-TM spectral bands and derived vegetation indices as explanatory variables, showed that the estimation of montado canopy cover was obtained with good agreement (R2 = 78.4%). Overall, montado canopy cover estimations showed that low canopy cover class (MT_1) is the most representative with 50.63% of total montado area. MODIS LSA and LST products were used to investigate the magnitude of differences in mean annual LSA and LST values between contrasting montado canopy cover percentages. As a result, it was found a significant statistical relationship between montado canopy cover percentage and mean annual surface albedo (R2 = 0.866, p < 0.001) and surface temperature (R2 = 0.942, p < 0.001). The comparisons between the four contrasting montado canopy cover classes showed marked differences in LSA (χ2 = 192.17, df = 3, p < 0.001) and LST (χ2 = 318.18, df = 3, p < 0.001). The highest montado canopy cover percentage (MT_4) generally had lower albedo than lowest canopy cover class, presenting a difference of −11.2% in mean annual albedo values. It was also showed that MT_4 and MT_3 are the cooler canopy cover classes, and MT_2 and MT_1 the warmer, where MT_1 class had a difference of 3.42 °C compared with MT_4 class. Overall, this research highlighted the role that potential changes in montado canopy cover may play in local land surface albedo and temperature variations, as an increase in these two biogeophysical parameters may potentially bring about, in the long term, local/regional climatic changes moving towards greater aridity.