884 resultados para Simulated experiment
Resumo:
OBJETIVO: Avaliar os efeitos do lisinopril (L) sobre as taxas de mortes (M), insuficiência cardíaca (ICC), características da remodelação miocárdica, geométrica e funcional do ventrículo esquerdo (VE), em ratos com estenose aórtica supravalvar (EAS). MÉTODOS: Ratos foram submetidos a EAS ou cirurgia simulada (GC:n=10). Randomizados após 6 semanas para receber L (GL:n=30) ou nenhum tratamento (GE:n=73) sendo avaliados 6s e 21s por estudos ecocardiográfico, hemodinâmico e morfológico concomitantes. RESULTADOS: As taxas de M (GE: 53,9% vs GL: 16,7% e ICC GE: 44,8% vs GL: 20% p<0,05). No final do experimento, os valores da pressão sistólica do VE dos grupos GE e GL foram equivalentes e significantemente mais elevados do que no grupo GC; (p<0,05) não diferindo dos observados 6 semanas após os procedimentos cirúrgicos. Os valores da pressão diastólica do VE no grupo GE foram maiores do que os do grupo GL (p<0,05) sendo ambos maiores do que os do grupo GC (4 ± 2 mmHg, p<0,05). O mesmo comportamento foi observado com as variáveis: razão E/A; índice de massa, área seccional dos miócitos e conteúdo de hidroxiprolina do VE. A porcentagem de encurtamento do VE foi semelhante nos grupos GC e GL (p>0,05) sendo ambos maiores que os verificados no grupo GE. Comportamento semelhante foram obtidos com os valores da primeira derivada positiva e negativa da pressão do VE. CONCLUSÃO: em ratos com EAS o L reduziu as taxas de M e ICC e exerceu efeitos benéficos sobre a remodelação e a função do VE.
Resumo:
De forma geral, os cursos de física clássica oferecidos nas universidades carecem de exemplos de aplicações nas áreas de química e biologia, o que por vezes desmotivam os alunos de graduação destas áreas a estudarem os conceitos físicos desenvolvidos em sala de aula. Neste texto, a analogia entre os osciladores elétrico e mecânico é explorada visando possívies aplicações em química e biologia, mostrando-se de grande valia devido ao seu uso em técnicas de medição de variação de massa com alta precisão, tanto de forma direta como indireta. Estas técnicas são conhecidas como técnicas eletrogravimétricas e são de especial importância em aplicações que envolvem biossensores. Desta forma, o texto explora o estudo da analogia eletromecânica de forma interdisciplinar envolvendo as áreas de física, química e biologia. Baseado nessa analogia é proposto um experimento que permite a sua aplicação em diferentes níveis conceituais dessas disciplinas, tanto em abordagem básica como mais profunda.
Resumo:
Considerando que a palha pode alterar a dinâmica e a eficácia dos herbicidas no sistema de cana-crua e complementar a ação destes, o objetivo deste trabalho foi verificar a eficácia do amicarbazone no controle de plantas daninhas presentes em variadas circunstâncias, incluindo a possibilidade de absorção do herbicida diretamente da palha de cana-de-açúcar. Para isso, conduziu-se um experimento em vasos com quatro repetições, em que, além das testemunhas com e sem palha, o amicarbazone foi aplicado em diferentes situações: sobre 5 t ha-1 de palha; sobre o solo posteriormente recoberto com 5 t ha-1 de palha; sobre o solo sem cobertura de palha e com ou sem simulação de distintas quantidades de chuva aplicada antes ou após aplicação do produto. A dose de amicarbazone aplicada foi de 1.400 g ha-1 de ingrediente ativo (i.a.), com consumo de calda equivalente a 200 L ha-1. As plantas daninhas utilizadas foram Brachiaria plantaginea, Brachiaria decumbens, Ipomoea grandifolia e Cyperus rotundus. Avaliaram-se a porcentagem de controle das plantas daninhas aos 7, 14, 21, 28, 35, 42, 49 e 56 DAA, nos tratamentos em que o amicarbazone foi aplicado em pré-emergência, e aos 3, 10, 17, 24, 31 e 38 DAA, quando o herbicida foi aplicado em pós-emergência; a biomassa seca aos 56 ou 38 DAA; e a viabilidade dos tubérculos de C. rotundus, pelo teste de tetrazólio na última avaliação. Verificou-se que, independentemente da planta daninha avaliada, os maiores índices de controle foram alcançados quando o amicarbazone foi aplicado sobre a palha, simulando-se em seguida precipitação correspondente a 2,5 ou 30 mm de chuva, e nos tratamentos em que o herbicida foi aplicado diretamente no solo desnudo ou recoberto com palha. Dessa forma, para I. grandifolia, B. plantaginea e B. decumbens, patamares mais elevados de controle foram alcançados quando o amicarbazone atingiu o solo, tanto aplicado diretamente como quando lixiviado da palha pela chuva simulada após a aplicação. Já para C. rotundus, as maiores porcentagens de controle foram observadas quando o amicarbazone foi aplicado sobre a palha, com simulação de chuva imediatamente após a aplicação, evidenciando que a lixiviação pode ser um processo fundamental para uma apropriada absorção e eficácia do herbicida avaliado.
Resumo:
O objetivo da presente pesquisa foi verificar a eficácia do herbicida tebuthiuron no controle de plantas daninhas quando associadas à presença de palha de cana-de-açúcar. Para isso, conduziu-se um experimento em condições controladas em casa de vegetação, utilizando-se vasos com quatro repetições, onde, além das testemunhas com e sem palha, o tebuthiuron foi aplicado em diferentes situações: sobre 5 t de palha ha-1; sobre o solo posteriormente recoberto com 5 t de palha ha-1; sobre o solo sem cobertura de palha; e com ou sem simulação de distintas quantidades de chuva aplicada antes ou após a aplicação do produto. A dose de Combine 500 SC (tebuthiuron) aplicada foi de 1.000 g i.a. ha-1, com consumo de calda equivalente a 200 L ha-1. As plantas daninhas presentes no experimento foram Brachiaria plantaginea, Brachiaria decumbens e Ipomoea grandifolia. Avaliou-se a porcentagem de controle das plantas daninhas aos 7, 14, 21, 28, 35, 42, 49 e 56 DAA nos tratamentos em que o tebuthiuron foi aplicado em pré-emergência e aos 3, 10, 17, 24, 31 e 38 DAA, quando o herbicida foi aplicado em pós-emergência; e a biomassa seca aos 56 ou 38 DAA. Verificou-se que, independentemente da planta daninha avaliada, os maiores índices de controle foram alcançados quando o tebuthiuron foi aplicado sobre a palha, simulando-se em seguida precipitação correspondente a 2,5 ou 30 mm de chuva, e nos tratamentos em que o herbicida foi aplicado diretamente no solo desnudo ou recoberto com palha. Dessa forma, para I. grandifolia, B. plantaginea e B. decumbens, os índices mais elevados de controle foram alcançados quando o tebuthiuron atingiu o solo, tanto aplicado diretamente como quando lixiviado da palha pela chuva simulada após a aplicação.
Resumo:
Objetivou-se neste trabalho avaliar o controle em pré-emergência de Ipomoea hederifolia e Ipomoea quamoclit pelo herbicida sulfentrazone em função do intervalo de tempo entre a aplicação e a ocorrência de chuva e da manutenção ou não de palha de cana-de-açúcar na superfície do solo. Três experimentos foram desenvolvidos: dois em casa de vegetação e um em campo. Nos experimentos em casa de vegetação, foram estudadas três doses de sulfentrazone (0, 0,6 e 0,9 kg ha-1) pulverizado em duas quantidades de palha na superfície do solo (0 e 10 t ha-1) e cinco intervalos de tempo entre a sua aplicação e a simulação de chuva (0, 20, 40, 60 e 90 dias). No experimento em campo, foram avaliados cinco tratamentos de herbicida (sulfentrazone a 0,6 e 0,9 kg ha-1; sulfentrazone + hexazinone a 0,6 + 0,25 kg ha-1; amicarbazone a 1,4 kg ha-1; e imazapic a 0,147 kg ha-1) e duas testemunhas sem aplicação. A manutenção ou não da palha de cana sobre o solo também foi estudada. em casa de vegetação, a aplicação de 0,6 kg ha-1 de sulfentrazone foi suficiente para o controle adequado de I. hederifolia e I. quamoclit num ambiente seco com até 90 dias sem chuva após a aplicação. Os 20 mm de chuva simulados após a aplicação do herbicida foram suficientes para remover o sulfentrazone da palha para o solo, pois o efeito biológico de controle de I. hederifolia e I. quamoclit não foi alterado. em campo, sem ou com a permanência de palha de cana sobre o solo, o sulfentrazone isolado (0,6 e 0,9 kg ha-1) ou em mistura com hexazinone (0,6 + 0,25 kg ha-1) foi eficaz para I. hederifolia e I. quamoclit, com resposta similar ou melhor que a do amicarbazone (1,4 kg ha-1) e imazapic (0,147 kg ha-1).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: To compare simulated periodontal bone defect depth measured in digital radiographs with dedicated and non-dedicated software systems and to compare the depth measurements from each program with the measurements in dry mandibles.Methods: Forty periodontal bone defects were created at the proximal area of the first premolar in dry pig mandibles. Measurements of the defects were performed with a periodontal probe in the dry mandible. Periapical digital radiographs of the defects were recorded using the Schick sensor in a standardized exposure setting. All images were read using a Schick dedicated software system (CDR DICOM for Windows v.3.5), and three commonly available non-dedicated software systems (Vix Win 2000 v.1.2; Adobe Photoshop 7.0 and Image Tool 3.0). The defects were measured three times in each image and a consensus was reached among three examiners using the four software systems. The difference between the radiographic measurements was analysed using analysis of variance (ANOVA) and by comparing the measurements from each software system with the dry mandibles measurements using Student's t-test.Results: the mean values of the bone defects measured in the radiographs were 5.07 rum, 5.06 rum, 5.01 mm and 5.11 mm for CDR Digital Image and Communication in Medicine (DICOM) for Windows, Vix Win, Adobe Photoshop, and Image Tool, respectively, and 6.67 mm for the dry mandible. The means of the measurements performed in the four software systems were not significantly different, ANOVA (P = 0.958). A significant underestimation of defect depth was obtained when we compared the mean depths from each software system with the dry mandible measurements (t-test; P congruent to 0.000).Conclusions: the periodontal bone defect measurements in dedicated and in three non-dedicated software systems were not significantly different, but they all underestimated the measurements when compared with the measurements obtained in the dry mandibles.
Resumo:
The cathodic behaviour of oxides formed on titanium electrodes in physiological solutions at potentials between 3 and 5 V (vs. SCE) was studied by cyclic voltammetry. In case of anodic polarization at potentials higher than 3 V (vs. SCE), a cathodic peak at similar to 0.4 V (vs. SCE) appears in the cathodic scan, which could be due to the reduction of unstable peroxides. The results show that this peak depends on the anodic potential and the oxidation time. This behaviour supposedly is due to the formation of unstable titanium peroxides like TiO3 during anodization. Based on repetitive oxidation-reduction processes can be concluded that the created amount of TiO3 inside of the TiO2 surface layer seems to be constant. (c) 2006 Elsevier Ltd. All rights reserved.
Resumo:
Salmonella enterica serovar Enteritidis-lysing bacteriophages isolated from poultry or human sewage sources were used to reduce Salmonella Enteritidis in vitro and in experimentally infected chicks. Cocktails of 4 different bacteriophages obtained from commercial broiler houses (CB4O) and 45 bacteriophages from a municipal wastewater treatment plant (WT45O) were evaluated. In experiment 1, an in vitro crop assay was conducted with selected bacteriophage concentrations (105 to 101 pfu/mL) to determine ability to reduce Salmonella Enteritidis in the simulated crop environment. Following 2 h at 37 degrees C, CB40 or WT45O reduced Salmonella Enteritidis recovery by 1.5 or 5 log, respectively, as compared with control. However, CB40 did not affect total SE recovery after 6 h, whereas WT45O resulted in up to a 6-log reduction of Salmonella Enteritidis. In experiment 2, day-of-hatch chicks were challenged orally with 3 x 103 cfu /chick Salmonella Enteritidis and treated cloacally with 1 X 109 WT45O pfu/chick I h postchallenge. One hour later, chicks were treated or not with a commercially available probiotic (Floramax-B11). Both treatments significantly reduced Salmonella Enteritidis recovery from cecal tonsils at 24 h following vent lip application as compared with controls, but no additive effect was observed with the combination of bacteriophages and probiotic. In experiment 3, day-of-hatch chicks were challenged orally with 9 x 103 cfu/chick Salmonella Enteritidis and treated via oral gavage with I X 108 CB40 pfu/chick, 1.2 x 108 WT45O pfu/chick, or a combination of both, I h postchallenge. All treatments significantly reduced Salmonella Enteritidis recovered from cecal tonsils at 24 h as compared with untreated controls, but no significant differences were observed at 48 h following treatment. These data suggest that some bacteriophages can be efficacious in reducing SE colonization in poultry during a short period, but with the bacteriophages and methods presently tested, persistent reductions were not observed.
Resumo:
The simulated annealing optimization technique has been successfully applied to a number of electrical engineering problems, including transmission system expansion planning. The method is general in the sense that it does not assume any particular property of the problem being solved, such as linearity or convexity. Moreover, it has the ability to provide solutions arbitrarily close to an optimum (i.e. it is asymptotically convergent) as the cooling process slows down. The drawback of the approach is the computational burden: finding optimal solutions may be extremely expensive in some cases. This paper presents a Parallel Simulated Annealing, PSA, algorithm for solving the long term transmission network expansion planning problem. A strategy that does not affect the basic convergence properties of the Sequential Simulated Annealing algorithm have been implementeded and tested. The paper investigates the conditions under which the parallel algorithm is most efficient. The parallel implementations have been tested on three example networks: a small 6-bus network, and two complex real-life networks. Excellent results are reported in the test section of the paper: in addition to reductions in computing times, the Parallel Simulated Annealing algorithm proposed in the paper has shown significant improvements in solution quality for the largest of the test networks.
Resumo:
A case study of convective development in the Southwest Amazon region during the Wet Season Atmospheric Mesoscale Campaign (WETAMC) and Tropical Rainfall Measuring Mission (TRMM)/Large-Scale Biosphere-Atmosphere (LBA) Experiment in Amazonia is presented. The convective development during 7 February 1999 is shown to occur during a period of very weak large-scale forcing in the presence of topography and deforestation. The available data include dual Doppler radar analysis, radiosonde launches, and surface and boundary layer observations. The observational analysis is complemented with a series of model simulations using the RAMS with 2-km resolution over a 300 km 300 km area forced by a morning radiosonde profile. A comparison of the observed and simulated thermodynamic transformation of the boundary layer and of the formation of convective lines, and of their kinematic and microphysical properties is presented. It is shown that only a few very deep and intense convective cells are necessary to explain the overall precipitating line formation and that discrete propagation and coupling with upper atmosphere circulations may explain the appearance of several lines. The numerical simulation indicates that topography may be the cause of initial convective development, although later on the convective line is parallel to the midlevel shear. There are indications that small-scale deforestation may have an effect on increasing rainfall in the wet season when the large-scale forcing is very weak.
Resumo:
The aim of the present study was to assess the heat tolerance of animals of two Portuguese (Alentejana and Mertolenga) and two exotic (Frisian and Limousine) cattle breeds, through the monitoring of physiological acclimatization reactions in different thermal situations characterized by alternate periods of thermoneutrality and heat stress simulated in climatic chambers. In the experiment, six heifers of the Alentejana, Frisian and Mertolenga breeds and four heifers of the Limousine breed were used. The increase in chamber temperatures had different consequences on the animals of each breed. When submitted to heat stress, the Frisian animals developed high thermal polypnea (more than 105 breath movements per minute), which did not prevent an increase in the rectal temperature (from 38.7 degrees C to 40.0 degrees C). However, only a slight depression in food intake and in blood thyroid hormone concentrations was observed under thermal stressful conditions. Under the thermal stressful conditions, Limousine animals decreased food intake by 11.4% and blood triiodothyronine (T3) hormone concentration decreased to 76% of the level observed in thermoneutral conditions. Alentejana animals had similar reactions. The Mertolenga cattle exhibited the highest capacity for maintaining homeothermy: under heat stressful conditions, the mean thermal polypnea increased twofold, but mean rectal temperature did not increase. Mean food intake decreased by only 2% and mean T3 blood concentration was lowered to 85,6% of the concentration observed under thermoneutral conditions. These results lead to the conclusion that the Frisian animals had more difficulty in tolerating high temperatures, the Limousine and Alentejana ones had an intermediate difficulty, and the Mertolenga animals were by far the most heat tolerant.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
We examined the effects of simulated folivory by caterpillars on photosynthetic parameters and nitrogen (N) resorption efficiency in Quercus pyrenaica saplings. We analyzed the differences between intact leaves in control plants, punched leaves in damaged plants, and intact leaves in damaged plants. We then established two levels of simulated folivory: low (approximate to 13% of the leaf area of one main branch removed per plant) and high (approximate to 26% of the leaf area of one main branch removed per plant) treatments. No differences were found in net assimilation rate and conductance between either leaf type or treatment during the most favourable period for photosynthesis. However, the N content was lower in punched than in intact leaves, and as a result PNUE was higher in damaged leaves from treated trees. In leaf-litter samples, N mass was significantly higher in punched than in intact leaves in treated plants, and LMA was significantly higher in damaged than in intact leaves of both the treated and control plants. Consequently, N resorption efficiency was around 15% lower in damaged leaves as compared with intact leaves from treated and control plants. Mechanical injury to leaves not only triggered no compensatory photosynthetic response to compensate a lower carbon uptake due to leaf area loss, but also affected the resorption process that characterizes leaf senescence.