Uncertainties of the 137Cs technique for validation of soil redistribution modelling in a semiarid meso-scale watershed

Scarcity of long-term series of sediment-related variables has led watershed managers to apply mathematical models to simulate sediment fluxes. Due to the high efforts for installation and maintenance of sedimentological gauges, tracers have been pointed out as an alternative to validate soil redistribution modelling. In this study, the 137Cs technique was used to assess the WASA-SED model performance at the Benguê watershed (933 km²), in the Brazilian semiarid. Qualitatively, good agreement was found among the 137Cs technique and the WASA-SED model results. Nonetheless, quantitatively great differences, up to two orders of magnitude, were found between the two methods. Among the uncertainties inherent to the 137Cs technique, definition of the reference inventory seems to be a major source of imprecision. In addition, estimations of water and sediment fluxes with mathematical models usually also present high uncertainty, contributing to the quantitative differences of the soil redistribution estimates with the two methods.

Deficit irrigation in grapevine cv. Syrah during two growing seasons in the brazilian semiarid

Irrigation plays an important role for grape’s yield as well as on its quality for winemaking. Thus, the effects of deficit irrigation strategies on yield and quality of wine grapes cv. Syrah were evaluated in Petrolina, State of Pernambuco, Brazil. Evaluations were carried out throughout the second and third growing seasons, which were from November 2010 to February 2011 (rainy season) and from May to September 2011 (dry season), respectively. Vines were drip irrigated and the experimental design was completely randomized with three treatments and four replications. The treatments were full irrigation (FI), performed according crop evapotranspiration; regulated deficit irrigation (RDI), in which irrigation was interrupted in phenological growth stage of bunch closure, but was occasionally performed according soil water monitoring of the root zone; and deficit irrigation (DI), when irrigation was interrupted from bunch closure to harvesting. Differences on leaf water content among treatments were observed in both growing seasons and RDI and DI treatment plants presented moderate water stress. The number of bunches did not differ among treatments in both growing seasons; however, bunch weight per plant, average bunch weight and soluble solid content were higher in FI treatment during the dry season. Deficit irrigation strategies promoted water saving.

Registro dos ensaios clínicos

The International Committee of Medical Journal Editors (ICMJE) proposed trials registration in a public trials registry, as a condition for publication. This policy started after July 1, 2005, and was supported by the World Association of Medical Editors (WAME). In May 19, 2006, the WHO urged research institutions and companies to register all medical studies that test treatments on human beings, whether they involve patients or healthy volunteers. The WHO also started the International Clinical Trials Registry Platform (ICTRP), aimed at standardizing the way information of studies is made available to the public. The following registers contribute data directly to the Who Search Portal: Australian Clinical Trials Registry, ClinicalTrials.gov, and International Standard Randomized Controlled Trial Number Register. In May 15, 2007, the Latin American and Caribbean Center on Health Sciences Information (BIREME) published a recommendation for editors of health journals indexed in Latin American and Caribbean Literature on Health Sciences (LILACS) and Scientific Library Electronic Online (ScieLO) about registration of clinical trials. In addition to the UMIN Clinical Trial Registry and the Nederlands Trial Register, the ICMJE is now accepting registration in any of the primary registers that participate in the WHO ICTRP. The ICMJE is also adopting the WHO's definition of clinical trial. Three years ago, trials registration was the exception; now it is the rule. Registration facilitates the dissemination of information, and it helps to assure trial participants that the information that accrues as a result of their altruism will become part of the public record.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.

Finna - Opening Access to Cultural Heritage and Scientific Information

Aki Lassilan esitys Europeana työpajassa 20.11.2012 Helsingissä.

Adaptação para o português de questionário de avaliação da informação científica em saúde na imprensa (Index of Scientific Quality)

OBJETIVO: Adaptação para a língua portuguesa e avaliação da aplicabilidade do questionário Index of Scientific Quality (ISQ) em textos sobre saúde da mulher, apresentados por revistas brasileiras. MÉTODOS: O estudo é de corte transversal. Foram coletados textos publicados entre agosto de 2005 e julho de 2006 nas principais revistas semanais: Veja, Época e Isto É. O questionário utilizado possui oito itens, que variam de um a cinco, e medem a aplicabilidade, o grau de opinião, a validade e o alcance da descoberta, precisão, coerência e consequência dos dados, além de um item global, que resume os outros itens. O ISQ foi traduzido, retrotraduzido e submetido à prova piloto até a versão definitiva, utilizada por dois médicos e dois jornalistas. Após a análise dos textos, foi verificada a consistência interna dos itens do questionário pelo coeficiente alfa de Cronbach e a concordância inter e intraobservador para cada item por meio do índice Kappa. RESULTADOS: A amostra conteve 80 textos. A consistência interna dos itens variou entre 0,81 e 0,96. A concordância interavaliadores foi de -0,03 a 0,48 e a intraobservador variou entre 0,27 e 0,34. (IC 95%). CONCLUSÃO: Os itens do questionário mensuraram de forma adequada a qualidade científica, porém a baixa concordância inter e intraobservadores indica a necessidade de novos estudos para se avaliar a versão brasileira do ISQ.

Foot rot and other foot diseases of goat and sheep in the semiarid region of northeastern Brazil

This paper reports the occurrence and epidemiology of outbreaks of foot rot and other foot diseases in goats and sheep in the semiarid region of Paraíba, northeastern Brazil. Four farms were inspected for the presence of foot lesion in sheep and goats and for environmental conditions, general hygiene, pastures, and disease control measures. The prevalence of foot lesions was 19.41% (170/876) in sheep and 17.99% (52/289) in goats, ranging between 5.77% and 33.85% in different farms. Foot rot was the most common disease, affecting 12.1% of the animals examined (141/1165), but with significantly higher (p<0.05) prevalence in sheep (13.69%) than in goats (7.27%). The frequency of malignant foot rot was also significantly lower (p<0.05) in goats (9.53%) than in the sheep (40.83%). On one farm, Dorper sheep showed significantly higher (p<0.05) prevalence of foot rot (17.5%) than Santa Inês sheep (6.79%), and the number of digits affected was also higher in the former. Dichelobacter nodosus and Fusobacterium necrophorum were isolated from cases of foot rot. White line disease was found in 3.95% of the animals, sole ulcers in 1.29%, foot abscess in 1.03% and hoof overgrowth in 0.5%. The high rainfall at the time of occurrence, grazing in wetlands, clay soils with poor drainage, presence of numerous stony grounds, closure of the flocks in pens at night, and introduction of affected animals were considered predisposing factors for the occurrence of foot diseases.

Estrus cycle monitoring of captive collared peccaries (Pecari tajacu) in semiarid conditions

Collared peccaries (Peccary tajacu) are among the most hunted species in Latin America due the appreciation of their pelt and meat. In order to optimize breeding management of captive born collared peccaries in semiarid conditions, the objective was to describe and correlate the changes in the ovarian ultrasonographic pattern, hormonal profile, vulvar appearance, and vaginal cytology during the estrus cycle in this species. During 45 days, females (n=4) were subjected each three days to blood collection destined to hormonal dosage by enzyme immunoassay (EIA). In the same occasions, evaluation of external genitalia, ovarian ultrasonography and vaginal cytology were conducted. Results are presented as means and standard deviations. According to hormonal dosage, six estrous cycles were identified as lasting 21.0 ± 5.7 days, being on average 6 days for the estrogenic phase and 15 days for the progesterone phase. Estrogen presented mean peak values of 55.6 ± 20.5 pg/mL. During the luteal phase, the high values for progesterone were 35.3 ± 4.4 ng/mL. The presence of vaginal mucus, a reddish vaginal mucosa and the separation of the vulvar lips were verified in all animals during the estrogenic peak. Through ultrasonography, ovarian follicles measuring 0.2±0.1 cm were visualized during the estrogen peak. Corpora lutea presented hyperechoic regions measuring 0.4±0.2 cm identified during luteal phase. No significant differences (P>0.05) between proportions of vaginal epithelial cells were identified when comparing estrogenic and progesterone phases. In conclusion, female collared peccaries, captive born in semiarid conditions, have an estral cycle that lasts 21.0±5.7 days, with estrous signs characterized by vulvar lips edema and hyperemic vaginal mucosa, coinciding with developed follicles and high estrogen levels.

Systemic acanthamoebiasis associated with canine distemper in dogs in the semiarid region of Paraíba, Brazil

Infections by free-living amoebae can cause systemic disease in animals and humans. We describe the epidemiological, clinical and pathological aspects of disseminated acanthamoebiasis associated with canine distemper in three dogs of the semiarid region of Paraíba, Northeastern Brazil. Affected dogs developed progressive neurological and respiratory signs that progressed to death within in two to 20 days. Gross lesions were irregular and with yellow-reddish nodules randomly distributed in the lungs, heart, kidneys, spleen, lymph nodes, adrenals, and intestine. One dog had foci of malacia in the parietal cortex and another one in nucleus of brain basis. Histologically, pyogranulomas with areas of necrosis and hemorrhage in all organs affected were observed, associated with myriads of intralesional amoebic trophozoites. All three cases were concomitant canine distemper, that possibly triggered immunosuppression in the dogs. The diagnosis was performed through microscopic findings of infection by free-living amoebae and confirmed Acanthamoeba sp. by immunohistochemistry

Babesia canis vogeli infection in dogs and ticks in the semiarid region of Pernambuco, Brazil

Abstract:This study aimed to report the prevalence of Babesia canis vogeli in dogs and ticks in the urban and rural areas of Petrolina, Pernambuco. Serum and peripheral blood samples of 404 dogs were tested by indirect immunofluorescence assay (IFA) and by blood smears, respectively. The presence of tick infestation was evaluated, and some specimens were submitted to DNA amplification by polymerase chain reaction (PCR). The presence of antibodies anti-B. canis vogeli was determinate in 57.9% (234/404) of dogs. The direct detection of Babesia spp was obtained in 0.5% (2/404) dogs by visualization of intraerythrocytic forms. Infestation by Rhipicephalus sanguineus sensu lato was observed in 54.5% (220/404) of dogs in both urban and rural areas. DNA of Babesia canis vogeli were obtained by PCR in 6% individual (3/50) and 8.7% of pool of ticks (7/80). The risk factors for the presence of anti-B. canis vogeli antibodies, as determined through the application of logistic regression models (P<0.05), were the following: medium breed size variables (P<0.001); contact with areas of forest (P=0.021); and access on the street (P=0.046). This study describes, for the first time, the confirmation of infection of B. canis vogeli in dogs and ticks in the semiarid region of Pernambuco, Brazil.

Occurrence and risk factors assessment associated with Mycoplasma gallisepticum (MG) infection in chickens in the semiarid region of Pernambuco, Brazil

Abstract: The aim of the present study was to assess the occurrence of Mycoplasma gallisepticum (MG) infection and risk factors of this disease in three hundred serum samples from on 23 familiar agricultural properties in the semiarid region of the state of Pernambuco, Brazil. ELISA was used to study antibodies anti-Mycoplasma gallisepticum. The univariate analysis (chi-squared test or Fischer's exact test) followed by multivariate analysis (logistic regression) were used to assess the risk factors with two variables: management and sanity of the poultry. It was detected a frequence of 53.33% (157/300) of the birds were positive for MG, with 100% foci. The risk factors confirmed by multivariate analysis, in the present study, were the presence of other poultry species on the property, including Numida meleagris (OR=2.22; p=0.005), parrots (OR=1.72; p=0.027), and of passerines (OR=1.88; p=0.007). These results showed that Mycoplasma gallisepticum infection is endemic among backyard poultry in the semiarid region of the state of Pernambuco. These birds could be a source of infection for other wild or domestic poultry. . This is the first report of the occurrence of avian mycoplasmosis in backyard poultry in the state of Pernambuco in northeastern Brazil. The risk factors identified should serve as a parameter for the health authorities to seek solutions related to controlling the disease.

Scientific creativity and diversity of physical work environment: framework development

The aim of this research was to develop a framework to analyze how physical environment influences scientific creativity. Due to the relative novelty of this topic, there is still a gap in the unified method to study connection between physical environment and creativity. Therefore, in order to study this issue deeply, the qualitative method was used (interviews and qualitative questionnaire). Scientists (PhD students and senior researchers) of Graduate School of Management were interviewed to build the model and one expert interview was conducted to assess its validity. The model highlights several dimensions via which physical environment can influence scientific creativity: Comfort, Instruments and Diversity. Comfort and Instruments are considered to be related mostly to productivity, an initial requirement for creativity, while Diversity is the factor responsible for supporting all the stages of scientific creative process. Thus, creative physical environment is not one place by its nature, but an aggregative phenomenon. Due to two levels of analysis, the model is named the two-level model of creative physical environment.