Raman scattering efficiency of graphene

We determine the Raman scattering efficiency of the G and 2D peaks in graphene. Three substrates are used: silicon covered with 300 or 90 nm oxide, and calcium fluoride (CaF2). On Si/SiOx, the areas of the G and 2D peak show a strong dependence on the substrate due to interference effects, while on CaF2 no significant dependence is detected. Unintentional doping is reduced by placing graphene on CaF2. We determine the Raman scattering efficiency by comparison with the 322 cm -1 peak area of CaF2. At 2.41 eV, the Raman efficiency of the G peak is ∼200×10-5 m-1Sr-1, and changes with the excitation energy to the power of 4. The 2D Raman efficiency is at least one order of magnitude higher than that of the G peak, with a different excitation energy dependence. © 2013 American Physical Society.

An improved method for the extraction of low molecular weight organic acids in variable charge soils

Due to specific adsorption to variable charge soils, low molecular weight organic acids (LMWOAs) have not been sufficiently extracted, even if common extractants, such as water and 0.1 M sodium hydroxide (NaOH), were employed. In this work, the method for extracting LMWOAs in soils with 0.1 M NaOH was improved for variable charge soils; e.g. 1.0 M potassium fluoride (KF) with pH 4.0 was applied as an extractant jointed with 0.1 M NaOH based on its stronger ability to change the electrochemical properties of variable charge soils by specific adsorption. With the proposed method, the recoveries of oxalic, tartaric, malic, citric and fumaric acids were increased from 83 4, 93 1, 22 2, 63 +/- 5 and 84 +/- 3% to 98 +/- 2, 100 +/- 2, 85 +/- 2, 90 +/- 2 and 89 +/- 2%, respectively, compared with NaOH alone. Simultaneously, the LMWOAs in Agri-Udic Ferrosol with field moisture were measured with a satisfactory result.

Increased carbon nanotube area density after catalyst generation from cobalt disilicide using a cyclic reactive ion etching approach

We used a cyclic reactive ion etching (RIE) process to increase the Co catalyst density on a cobalt disilicide (CoSi2) substrate for carbon nanotube (CNT) growth. Each cycle of catalyst formation consists of a room temperature RIE step and an annealing step at 450 °C. The RIE step transfers the top-surface of CoSi2 into cobalt fluoride; while the annealing reduces the fluoride into metallic Co nanoparticles. We have optimized this cyclic RIE process and determined that the catalyst density can be doubled in three cycles, resulting in a final CNT shell density of 6.6 × 10 11 walls·cm-2. This work demonstrates a very effective approach to increase the CNT density grown directly on silicides. © 2014 AIP Publishing LLC.

Color center conversion by femtosecond pulse laser irradiation in LiF : F-2 crystals

We report the observation of intense spontaneous emission of green light from LiF:F-2:F-3(+) centers in active channel waveguides generated in lithium fluoride crystals by near-infrared femtosecond laser radiation. While irradiating the crystal at room temperature with 405 nm light from a laser diode, yellow and green emission was seen by the naked eye. Stripe waveguides were fabricated by translating the crystal along the irradiated laser pulse, and their guiding properties and fluorescence spectra at 540 nm demonstrated. This single-step process inducing a waveguide structure offers a good prospect for the development of a waveguide laser in bulk LiF crystals.

氟化物无机纳米粒子的制备及其稀土掺杂体系的光谱性质

对于纳米复合材料来说，首要解决的问题就是光散射。光散射现象主要是粒子尺寸以及粒子与基质材料折射率的差异引起的。对于小粒子（＜25nm），纳米粒子与基质材料之间的折射率差异不会造成明显的光散射现象，但对于较大粒子来说，为避免明显的光散射现象的发生，二者之间的折射必须吻合。由瑞利散射公式计算得知，当粒子直径大到100nm时，粒子与基质之间的折射率差值必须在0.02之内。因此，解决复合材料光散射问题有两种途径：尽量减小纳米粒子尺寸；选择折射率匹配良好的氟化物和聚合物分别作光学活性组分的基质和材料的基底材料。由于微乳液法合成纳米粒子条件温和、设备简单，所合成纳米粒子尺寸可控。本文首先研究了微乳液结构和性质，采用微乳液法合成氟化物纳米粒子，并研究了其稀土掺杂体系的光学性质。对于微乳液结构和性质的研究，本文绘制了十六烷基三甲基嗅化钱（CTAB）／正丁醇（n-C_4H_9OH）／正辛烷（n-C_8H_(18)）／水（或NH4F溶液、或Ba(NO_3)_2溶液、或KNO_3-Mg(NO_3)_2混合溶液）四组分微乳体系的三元相图，观察了电导率随水（或豁溶液）含量变化的规律，很好地印证了微乳液体系的相行为。实验发现，在这四个四元体系的相图中，Ba(NO_3)_2溶液体系的油包水区域面积最大，纯水体系水包油微乳区面积最小，我们分析认为水包油微乳区面积的变化是由于体系中加入离子后对表面活性剂阳离子的静电作用所引起的。采用十六烷基三甲基澳化按（CTAB）／正丁醇／正辛烷／水体系合成了KMgF_3以及KMgF_3:Eu~(2+)纳米粒子。XRD分析表明所合成纳米粒子为立方KMgF_3单相；环境扫描电子显微镜（ESEM）分析得到所合成KMgF_3:Eu~(2+)纳米粒子粒径约为20nm。KMgF_3:Eu~(2+)纳米粒子光谱研究发现其发射峰位于360nm附近，其激发峰位于250nm附近，较KMgF_3:Eu~(2+)单晶的激发峰峰蓝移了约80nm。对KMgF_3:Eu~(2+)纳米粒子激发峰蓝移的机理进行了初步探讨。采用CTAB/2-丁醇／水微乳体系合成出球形BaF_2纳米粒子，XRD和ICP数据显示样品为纯BaF_2相；FTIR谱图证明体系中没有有机物质的存在。将由纳米粒子分散到水中所形成的胶体滴到铜网上，干燥后发现所合成粒子有自组装的特性摘要且粒子自组装形状因粒子尺寸以及样品制备过程而异。粒子的自组装完全是自发的，没有任何的化学试剂对粒子进行包覆，也没对粒子施加除超声分散之外的任何外力。当将一滴胶体溶液直接滴到铜网上，干燥后我们得到粒子的圆形自组装，较大粒子分布在外围形成一个圆，较小粒子分布在圆的内部形成环；我们将一滴BaF_2纳米粒子胶体溶液滴加到铜网上，待干燥后滴加第二滴，重复此操作两次，这样铜网上共滴加的胶体溶液为3滴，此时我们得到粒子的双平行线型组装；直接滴加3滴BaF_2纳米粒子胶体溶液到铜网上，干燥后得粒子的桶状自组装。采用CTAB／正丁醇／正辛烷／水体系于35℃下合成带有枝晶的BaF_2纳米立方。这些枝晶生长在纳米立方的两个相邻面之间呈片状弧形。粉末XRD分析表明，体系为BaF_2单相且结晶良好；用扫描电子显微镜（SEM）对粒子进行分析发现，所得纳米立方边长为400-450nm；FTIR分析表明，经处理后样品中没有有机物质残存；对枝晶的能谱分析（EDS）分析表明，枝晶中只有Ba和F两种元素而未发现C元素存在。这说明，立方上所生长的枝晶为纯BaF_2产物而非有机物质所形成的。试验发现，所合成粒子的尺寸和形状依赖于反应温度和反应时间。采用士一述体系，于25℃下反应，可得到横截面边长40nm，长200nm的立方柱状纳米粒子，并且未见枝晶。从不同反应时间所合成粒子的形状上我们可以估计纳米立方以及枝晶的住：长过程。采用CTAB／正丁醇／正辛烷／水体系首次合成了BaF_2:Er纳米粒子，并研究了掺杂浓度对粒子红外发光的影响，XRD分析表明所合成BaF_2:Er纳米粒子为BaF_2立方相，物相纯净，结晶良好；TEM分析表明在掺杂浓度为6mol％时，粒子尺寸为15-20nm，士曾大粒子的掺杂浓度（8，10和12mol％）下，其尺寸和形状无明显改变，但粒子团聚现象严重。粒子在氢离子激光器488nm激发下的荧光（PL）光谱显示，随粒子掺杂浓度的增大，其发光强度增强，半峰宽加宽。研究了BoF_2:Er纳米粒子尺寸对其发光强度的影响，通过调节体系中水含量以达到控制粒子尺寸的目的。在体系中水含量。分别为5，8，15的条件「分别合成出平均粒径约为8，10和20.5nm的粒子。从粒子的激光粒度分布图中我们可得到粒子的平均尺寸。从粒子的XRD图中我们可以发现，随粒子粒径的减小，粉末的衍射峰出现偏移的情况。对于不同种纳米粒子，粒子粒径越小，衍射峰偏移越严重；对于相同的粒子，衍射角度越大，衍射峰偏移的越严重。从三种粒子的红峰的半峰宽和有效半峰宽越宽，对于8nm粒径的粒子，我们得到其最大半峰宽为145nm或有效半峰宽173nm。而且随粒子粒径的减小，其发射峰出现红移的现象。采用CTAB／正丁醇／正辛烷／水体系首次合成了CeF_3以及掺杂浓度为17，25，30，42和50mol％的CeF_3:Lu纳米粒子。XRD分析表明，所合成纳米粒子为CeF_3六角相，物相纯净，结晶良好，即使在高的掺杂浓度下（50mol％）体系中一也无其他杂质相的存在。环境扫描电子显微镜（ESEM-FEG）分析表明，所合成CeF_3纳米粒子粒径为巧一20nm，Lu的掺入对粒子的形状和尺寸影响不明显，但在较高的掺杂浓度下粒子团聚现象严重。粒子的荧光光谱表明，CeF_3以及Lu：CeF_3纳米粒子在254nm的激发波长下的发射光谱从290nm到400nm的宽带发射，发射峰位于325nm，较单晶体的发射峰红移约30nm；Lu的掺入有利于提高CeF_3纳米粒子的发光强度，随Lu掺入量的增大，粒子的发光强度出现先增后减的情况，在掺杂浓度为30mol％时，我们得到CeF_3纳米粒子的最大发射，但在50mol％的掺杂浓度下的粒子的发射强度仍要比未掺杂体系的发光强度要强。325nln监测粒子的激发光谱是从200nm到350nm的宽带吸收，激发峰峰位于260nm左右。比CeF_3单晶体的280nm激发峰蓝移了20nm左右。而且粒子的激发光谱中未见长波方向上的肩峰，说明粒子中CeF_3纳米粒子结晶良好，且体系中氧含量低。采用自创建一步原位聚合的方法合成了聚合物包覆的纳米粒子，并采用本体聚合的方法合成复合材料。综上所述，本文采用微乳液法合成了不同的氟化物纳米粒子，并研究了其稀土掺杂体系的光学特性，为聚合物基复合材料的制备以及应用奠定了可靠的实验基础。

Micro Insert: A Prototype Full-Ring PET Device for Improving the Image Resolution of a Small-Animal PET Scanner

A full-ring PET insert device should be able to enhance the image resolution of existing small-animal PET scanners. Methods: The device consists of 18 high-resolution PET detectors in a cylindric enclosure. Each detector contains a cerium-doped lutetium oxyorthosilicate array (12 x 12 crystals, 0.72 x 1.51 x 3.75 mm each) coupled to a position-sensitive photomultiplier tube via an optical fiber bundle made of 8 x 16 square multiclad fibers. Signals from the insert detectors are connected to the scanner through the electronics of the disabled first ring of detectors, which permits coincidence detection between the 2 systems. Energy resolution of a detector was measured using a Ge-68 point source, and a calibrated 68Ge point source stepped across the axial field of view (FOV) provided the sensitivity profile of the system. A Na-22 point source imaged at different offsets from the center characterized the in-plane resolution of the insert system. Imaging was then performed with a Derenzo phantom filled with 19.5 MBq of F-18-fluoride and imaged for 2 h; a 24.3-g mouse injected with 129.5 MBq of F-18-fluoride and imaged in 5 bed positions at 3.5 h after injection; and a 22.8-g mouse injected with 14.3 MBq of F-18-FDG and imaged for 2 h with electrocardiogram gating. Results: The energy resolution of a typical detector module at 511 keV is 19.0% +/- 3.1 %. The peak sensitivity of the system is approximately 2.67%. The image resolution of the system ranges from 1.0- to 1.8-mm full width at half maximum near the center of the FOV, depending on the type of coincidence events used for image reconstruction. Derenzo phantom and mouse bone images showed significant improvement in transaxial image resolution using the insert device. Mouse heart images demonstrated the gated imaging capability of the device. Conclusion: We have built a prototype full-ring insert device for a small-animal PET scanner to provide higher-resolution PET images within a reduced imaging FOV. Development of additional correction techniques are needed to achieve quantitative imaging with such an insert.

Liquid-liquid extraction of protactinium(V) using tri-iso-octylamine

Solvent extraction of protactinium with tri-iso-octyl-amine (TIOA) in xylene, benzene, carbon tetrachloride and chloroform from HCl, HF, HNO3, HClO4 and H2SO4 media was studied using Pa-233 as a radiotracer. The extraction efficiencies of protactinium were determined as a function of shaking time, concentrations of mineral acids in aqueous phase, extractant concentrations and diluents in organic phase. The extraction mechanism was discussed. The results show that the extracted species in the organic phase is [(R3N-H)(n)Pa(OH)(x)Cl-y(5-x-y)].

Hydrothermal synthesis and characterization of microporous crystals of trivalent metal-containing zirconium phosphates

Two organically templated trivalent metal-containing crystalline zirconium phosphate materials FeZrPO-8 and AlZrPO-8 have been prepared hydrothermally by using fluoride as a mineralizer, and 1,6-diaminohexane (DAH) as templates. The powder XRD patterns indicate that the as-synthesized products are new materials. Substitutions of Al3+ or Fe3+ into Zr4+ sites were confirmed by a combination of powder X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) studies. The thermal behavior of the title compounds have been investigated using TG-DTA and X-ray thermodiffractometry, which indicated that the inorganic framework of the compounds are thermally stable up to similar to400 degreesC. (C) 2004 Elsevier B.V. All rights reserved.

Direct synthesis of Al-SBA-15 mesoporous materials via hydrolysis-controlled approach

Aluminum-substituted mesoporous SBA-15 (Al-SBA-15) materials were directly synthesized by a hydrolysis-controlled approach in which the hydrolysis of the silicon precursor (tetraethyl orthosilicate, TEOS) is accelerated by fluoride or by using tetramethyl orthosilicate (TMOS) as silicon precursor rather than TEOS. These materials were characterized by powder X-ray diffraction (XRD), N-2 sorption isotherms, TEM, Al-27 MAS NMR, IR spectra of pyridine adsorption, and NH3-TPD. It is found that the matched hydrolysis and condensation rates of silicon and aluminum precursors are important factors to achieve highly ordered mesoporous materials. Al-27 MAS NMR spectra of Al-SBA-15 show that all aluminum species were incorporated into the silica framework for the samples prepared with the addition of fluoride. A two-step approach (sol-gel reaction at low pH followed by crystallization at high pH) was also employed for the synthesis of Al-SBA-15. Studies show that the two-step approach could efficiently avoid the leaching of aluminum from the framework of the material. The calcined Al-SBA-15 materials show highly ordered hexagonal mesostructure and have both Bronsted and Lewis acid sites with medium acidity.

Characterization of stable isotope fractionation during methane production in the sediment of a eutrophic lake,lake dagow,germany

We measured delta C-13 of CO2, CH4, and acetate-methyl in profundal sediment of eutrophic Lake Dagow by incubation experiments in the presence and absence of methanogenic inhibitors chloroform, bromoethane sulfonate (BES), and methyl fluoride, which have different specificities. Methyl fluoride predominantly inhibits acetoclastic methanogenesis and affects hydrogenotrophic methanogenesis relatively little. Optimization of methyl fluoride concentrations resulted in complete inhibition of acetoclastic methanogenesis. Methane was then exclusively produced by hydrogenotrophic methanogenesis and thus allowed determination of the fractionation factors specific for this methanogenic pathway. Acetate, which was then no longer consumed, accumulated and allowed determination of the isotopic signatures of the fermentatively produced acetate. BES and chloroform also inhibited CH4 production and resulted in accumulation of acetate. The fractionation factor for hydrogenotrophic methanogenesis exhibited variability, e. g., it changed with sediment depth. The delta C-13 of the methyl group of the accumulated acetate was similar to the delta C-13 of sedimentary organic carbon, while that of the carboxyl group was by about 12 parts per thousand higher. However, the delta C-13 of the acetate was by about 5 parts per thousand lower in samples with uninhibited compared with inhibited acetoclastic methanogenesis, indicating unusual isotopic fractionation. The isotope data were used for calculation of the relative contribution of hydrogenotrophic vs. acetoclastic methanogenesis to total CH4 production. Contribution of hydrogenotrophic methanogenesis increased with sediment depth from about 35% to 60%, indicating that organic matter was only partially oxidized in deeper sediment layers.

Coal-burning roasted corn and chili as the cause of dental fluorosis for children in southwestern China

To find the pathologic cause of the children's dental fluorosis in southwestern China, diet structure before the age of 6 and prevalence rate of dental fluorosis (DF) of 405 children were investigated, and the fluorine and arsenic content of several materials were determined. The prevalence rate of DF of children living on roasted corn before the age of 6 is 100% with nearly 95% having the mild to severe DF; while that of children living on non-roasted corn or rice is less than 5% with all having very mild DF. The average fluorine and arsenic concentration are 20.26 mg/kg and 0.249 mg/kg in roasted corn, which are about 16 times and 35 times more than in non-roasted corn, respectively. The average fluorine concentration is 78 mg/kg in coal, 1116 mg/kg in binder clay and 313 mg/kg in briquette (coal mixed with clay). The average arsenic concentration of coal is 5.83 mg/kg, the binder clay is 20.94 mg/kg, with 8.52 mg/kg in the briquette. Living on roasted corn and chili is the main pathologic cause of endemic fluorosis in southwestern China. The main source of fluorine and arsenic pollution of roasted corn and chill is the briquette of coal and binder clay. (C) 2010 Elsevier B.V. All rights reserved.

An effective method for enhancing metal-ions' selectivity of ionic liquid-based extraction system: Adding water-soluble complexing agent

Selective extraction-separation of yttrium(Ill) from heavy lanthanides into 1-octyl-3-methylimidazolium hexafluorophosphate ([C(8)mim][PF6]) containing Cyanex 923 was achieved by adding a water-soluble complexing agent (EDTA) to aqueous phase. The simple and environmentally benign complexing method was proved to be an effective strategy for enhancing the selectivity of [C(n)mim] [PF6]/[Tf2N]-based extraction system without increasing the loss of [C(n)mim](+). (c) 2007 Elsevier B.V. All rights reserved.

Ionic liquid-based "all-in-one" synthesis and photoluminescence properties of lanthanide fluorides

A facile route to the synthesis of LnF(3) nanocrystals has been accomplished in three ionic liquids (ILs) (OmimPF(6), OmimBF(4), and BmimPF(6)). The partial hydrolysis of PF6- and BF4- was utilized to introduce a new fluoride source. Uniform LnF(3) (Ln = La, Ce, Pr, Nd, Sm, Eu, Er), Tb3+-doped CeF3, and Eu3+-doped LaF3 nanocrystals could be obtained in a large scale, and the products were up to 0.15 g per 10 mL solvents. In the "all-in-one" systems, the ILs acted as solvents, reaction agents, and templates.

Hydrothermal synthesis of lanthanide fluorides LnF(3) (Ln = La to Lu) nano-/microcrystals with multiform structures and morphologies

Lanthanide fluoride LnF(3) (Ln = La to Lu) nano-/microcrystals with multiform crystal structures (hexagonal and orthorhombic) and morphologies (separated elongated nanoparticles, aggregated nanoparticles, polyhedral microcrystals) were successfully synthesized by a facile, effective, and environmentally friendly hydrothermal method. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, and photoluminescence spectra were used to characterize the samples. The experimental results indicated that the use of NaBF4 is indispensable for obtaining LnF(3) crystal structures.

Shape controllable synthesis and upconversion properties of NaYbF4/NaYbF4 : Er3+ and YbF3/YbF3 : Er3+ microstructures

Ytterbium fluoride compounds with different crystal phases and morphologies, such as beta-NaYbF4 hexagonal microdisks, microprisms, microtubes, and alpha-NaYbF4 submicrospheres as well as YbF3 octahedra, have been synthesized via a facile hydrothermal route. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and photoluminescence (PL) spectra were used to characterize the samples.