Qualité de vie avant et 6 mois après angioplastie coronaire transluminale percutanée

Summary Background: Percutaneous transluminal coronary angioplasty (PTCA) is an effective and minimally invasive treatment for angina pectoris, but its impact on patient's quality of life has not been extensively studied with specific questionnaires. Methods: Over a 6 month period, ail patients suffering from angina, planned for elective PTCA, and available for a 6 months follow-up, were included in the study. The specific "Seattle Angina Questionnaire" (SAQ) was administered the day before and 6 months after PTCA. The decision to implant a coronary stent was left to the cardiologist in charge of the procedure. Results: 112 patients were initially included (39 PTCA and 62 PTCA with stent im-plantation). There was no difference in gender, age, angina severity and type of coronary lesion between the two groups. Follow-up at 6 months was available for 101 patients (90%). Quality of life was dramatically improved in 4 of 5 SAQ dimensions (physical limitation, angina stability, angina frequency, disease perception, p <0.001). Only treatment satisfaction was worse at follow-up then before the procedure (p = 0.03), in particular satisfaction with received explanations, belief that everything possible was donc to treat angina, and global satisfaction. A stent implantation had no impact on these results. Conclusions: PTCA for ischaemic cardiac disease improved not only physical abilities, but also quality of life dramatically. Dissatisfaction with treatment could be corrected with better information during follow-up. SAQ is easy to use and could be selected as a monitoring instrument. Résumé Contexte: Le traitement de l'angine de poitrine par angioplastie coronaire transluminale per-cutanée (PTCA) est efficace et peu invasif, mais son impact sur la qualité de vie des patients a été relativement peu étudié avec des questionnaires spécifiques. Méthode: Durant 6 mois, tous les patients souffrant d'une angine de poitrine pour qui une PTCA élective était envisagée, et qui étaient disponibles pour un suivi à 6 mois ont été inclus dans l'étude. Le questionnaire spécifique «Seattle Angina Questionnaire» (SAQ) a été utilisé le jour avant et 6 mois après la procédure. La décision d'implanter un stent était laissée au cardiologue au moment de la procédure. Résultats: 112 patients ont été initialement inclus. Trente-neuf d'entre eux ont été traités avec une PTCA, et 62 avec une PTCA et l'implantation de stent. Il n'y avait pas de différence de sexe, d'âge, de sévérité de l'angine de poitrine, et de type de lésion coronaire entre les deux groupes. Un suivi à 6 mois a été possible pour 101 patients (90% de la cohorte initiale). La qualité de vie a été améliorée de façon spectaculaire dans 4 des 5 dimensions du SAQ (limites physiques, stabilité de l'angor, fréquence de l'angor, perception de l'angor, p <0,001). Seule, la satisfaction avec le traitement était pire lors du suivi qu'avant l'intervention (p = 0,03), en particulier la satisfaction avec les explications reçues, la conviction que tous les moyens avaient été utilisés pour le traitement, et la satisfaction globale. L'implantation d'un stent n'a eu aucun impact sur ces résultats.

A simple halide-to-anion exchange method for heteroaromatic salts and ionic liquids

A broad and simple method permitted halide ions in quaternary heteroaromatic and ammonium salts to be exchanged for a variety of anions using an anion exchange resin (A− form) in non-aqueous media. The anion loading of the AER (OH− form) was examined using two different anion sources, acids or ammonium salts, and changing the polarity of the solvents. The AER (A− form) method in organic solvents was then applied to several quaternary heteroaromatic salts and ILs, and the anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Relying on the hydrophobicity of the targeted ion pair for the counteranion swap, organic solvents with variable polarity were used, such as CH3OH, CH3CN and the dipolar nonhydroxylic solvent mixture CH3CN:CH2Cl2 (3:7) and the anion exchange was equally successful with both lipophilic cations and anions.

Combining phospholipases and a liquid lipase for one-step biodiesel production using crude oils

Background Enzymatic biodiesel is becoming an increasingly popular topic in bioenergy literature because of its potential to overcome the problems posed by chemical processes. However, the high cost of the enzymatic process still remains the main drawback for its industrial application, mostly because of the high price of refined oils. Unfortunately, low cost substrates, such as crude soybean oil, often release a product that hardly accomplishes the final required biodiesel specifications and need an additional pretreatment for gums removal. In order to reduce costs and to make the enzymatic process more efficient, we developed an innovative system for enzymatic biodiesel production involving a combination of a lipase and two phospholipases. This allows performing the enzymatic degumming and transesterification in a single step, using crude soybean oil as feedstock, and converting part of the phospholipids into biodiesel. Since the two processes have never been studied together, an accurate analysis of the different reaction components and conditions was carried out. Results Crude soybean oil, used as low cost feedstock, is characterized by a high content of phospholipids (900 ppm of phosphorus). However, after the combined activity of different phospholipases and liquid lipase Callera Trans L, a complete transformation into fatty acid methyl esters (FAMEs >95%) and a good reduction of phosphorus (P <5 ppm) was achieved. The combination of enzymes allowed avoidance of the acid treatment required for gums removal, the consequent caustic neutralization, and the high temperature commonly used in degumming systems, making the overall process more eco-friendly and with higher yield. Once the conditions were established, the process was also tested with different vegetable oils with variable phosphorus contents. Conclusions Use of liquid lipase Callera Trans L in biodiesel production can provide numerous and sustainable benefits. Besides reducing the costs derived from enzyme immobilization, the lipase can be used in combination with other enzymes such as phospholipases for gums removal, thus allowing the use of much cheaper, non-refined oils. The possibility to perform degumming and transesterification in a single tank involves a great efficiency increase in the new era of enzymatic biodiesel production at industrial scale.

Human Capital Questionnaire (PHCQ): Assessment of European nurses' perception as indicators of human capital quality

Healthcare accreditation models generally include indicators related to healthcare employees' perceptions (e.g. satisfaction, career development, and health safety). During the accreditation process, organizations are asked to demonstrate the methods with which assessments are made. However, none of the models provide standardized systems for the assessment of employees. In this study, we analyzed the psychometric properties of an instrument for the assessment of nurses' perceptions as indicators of human capital quality in healthcare organizations. The Human Capital Questionnaire was applied to a sample of 902 nurses in four European countries (Spain, Portugal, Poland, and the UK). Exploratory factor analysis identified six factors: satisfaction with leadership, identification and commitment, satisfaction with participation, staff well-being, career development opportunities, and motivation. The results showed the validity and reliability of the questionnaire, which when applied to healthcare organizations, provide a better understanding of nurses' perceptions, and is a parsimonious instrument for assessment and organizational accreditation. From a practical point of view, improving the quality of human capital, by analyzing nurses and other healthcare employees' perceptions, is related to workforce empowerment.

Partnership for fragility bone fracture care provision and prevention program (P4Bones): study protocol for a secondary fracture prevention pragmatic controlled trial.

ABSTRACT: BACKGROUND: Fractures associated with bone fragility in older adults signal the potential for secondary fracture. Fragility fractures often precipitate further decline in health and loss of mobility, with high associated costs for patients, families, society and the healthcare system. Promptly initiating a coordinated, comprehensive pharmacological bone health and falls prevention program post-fracture may improve osteoporosis treatment compliance; and reduce rates of falls and secondary fractures, and associated morbidity, mortality and costs.Methods/design: This pragmatic, controlled trial at 11 hospital sites in eight regions in Quebec, Canada, will recruit community-dwelling patients over age 50 who have sustained a fragility fracture to an intervention coordinated program or to standard care, according to the site. Site study coordinators will identify and recruit 1,596 participants for each study arm. Coordinators at intervention sites will facilitate continuity of care for bone health, and arrange fall prevention programs including physical exercise. The intervention teams include medical bone specialists, primary care physicians, pharmacists, nurses, rehabilitation clinicians, and community program organizers.The primary outcome of this study is the incidence of secondary fragility fractures within an 18-month follow-up period. Secondary outcomes include initiation and compliance with bone health medication; time to first fall and number of clinically significant falls; fall-related hospitalization and mortality; physical activity; quality of life; fragility fracture-related costs; admission to a long term care facility; participants' perceptions of care integration, expectations and satisfaction with the program; and participants' compliance with the fall prevention program. Finally, professionals at intervention sites will participate in focus groups to identify barriers and facilitating factors for the integrated fragility fracture prevention program.This integrated program will facilitate knowledge translation and dissemination via the following: involvement of various collaborators during the development and set-up of the integrated program; distribution of pamphlets about osteoporosis and fall prevention strategies to primary care physicians in the intervention group and patients in the control group; participation in evaluation activities; and eventual dissemination of study results.Study/trial registration: Clinical Trial.Gov NCT01745068Study ID number: CIHR grant # 267395.

A Multi-Project Scheduling Procedure for Transportation Projects, Final Report, HR-339, 1993

This report proposes, that for certain types of highway construction projects undertaken by the Iowa Department of Transportation, a scheduling technique commonly referred to as linear scheduling may be more effective than the Critical Path Method scheduling technique that is currently being used. The types of projects that appear to be good candidates for the technique are those projects that have a strong linear orientation. Like a bar chart, this technique shows when an activity is scheduled to occur and like a CPM schedule it shows the sequence in which activities are expected to occur. During the 1992 construction season, the authors worked with an inlay project on Interstate 29 to demonstrate the linear scheduling technique to the Construction Office. The as-planned schedule was developed from the CPM schedule that the contractor had developed for the project. Therefore, this schedule represents what a linear representation of a CPM schedule would look like, and not necessarily what a true linear schedule would look like if it had been the only scheduling technique applied to the project. There is a need to expand the current repertoire of scheduling techniques to address those projects for which the bar chart and CPM may not be appropriate either because of the lack of control information or due to overly complex process for the actual project characteristics. The scheduling approaches used today on transportation projects have many shortcomings for properly modeling the real world constraints and conditions which are encountered. Linear project's predilection for activities with variable production rates, a concept very difficult to handle with the CPM, is easily handled and visualized with the linear technique. It is recommended that work proceed with the refinement of the method of linear scheduling described above and the development of a microcomputer based system for use by the Iowa Department of Transportation and contractors for its implementation. The system will be designed to provide the information needed to adjust schedules in a rational understandable method for monitoring progress on the projects and alerting Iowa Department of Transportation personnel when the contractor is deviating from the plan.

Simulating maize yield in sub‑tropical conditions of southern Brazil using Glam model

The objective of this work was to evaluate the feasibility of simulating maize yield in a sub‑tropical region of southern Brazil using the general large area model (Glam). A 16‑year time series of daily weather data were used. The model was adjusted and tested as an alternative for simulating maize yield at small and large spatial scales. Simulated and observed grain yields were highly correlated (r above 0.8; p<0.01) at large scales (greater than 100,000 km²), with variable and mostly lower correlations (r from 0.65 to 0.87; p<0.1) at small spatial scales (lower than 10,000 km²). Large area models can contribute to monitoring or forecasting regional patterns of variability in maize production in the region, providing a basis for agricultural decision making, and Glam‑Maize is one of the alternatives.

Involuntary treatment of alcohol-dependent patients: a study of 17 consecutive cases of civil commitment.

AIM: To investigate the baseline and follow-up characteristics of a group of alcohol-dependent patients being treated under civil commitment. METHODS: This study involved a cross-sectional comparative analysis of baseline characteristics and a follow-up survey of a group of committed alcoholic patients. The study was undertaken in the Alcohol Unit of a 1,000-bed general and university hospital. The study included 17 consecutive cases of civil commitment (representing 15 patients, of whom 2 were committed twice) and a comparative group of 34 randomly selected age- and sex-matched patients. Baseline characteristics of the cases (at the time of commitment) and of patients from the comparative group were collected from medical records, including sociodemographic data, medical condition, patterns of drinking and number and dates of previous treatments for alcohol-related problems. A structured follow-up interview of the cases provided information on their medical condition, social status, patterns of alcohol use, type and duration of residential treatment as well as their perceptions of commitment. RESULTS: During a 4-year period, our Unit referred 23 cases of alcohol-dependent patients (out of 367) to the Guardianship Authority, requesting civil commitment. On 17 occasions, patients were committed to residential treatment, including 2 patients who underwent commitment on two separate occasions, thus representing a total of 15 different patients. In comparison with age- and sex-matched patients seen at the Unit, the cases were characterized by multiple medical, social and psychological alcohol-related impairments. At the time of follow-up, 14 out of 15 patients were alive, among whom 10 agreed to be interviewed. Eight of these reported complete abstinence, whereas 9 considered their alcohol problem as less severe than before. The average duration of commitment was 29 weeks. The majority of patients retrospectively considered the measure as having been justified and useful. The patients' satisfaction with the decision to commit was higher among women than among men. Health-related quality of life at the time of follow-up, as assessed by the MOS 36-Item Short Form Health Survey questionnaire, was good on average and better than that usually reported by other cohorts of alcoholics undergoing treatment. CONCLUSIONS: The usefulness of residential civil commitment of certain severely impaired alcohol-dependent patients is underscored. This study suggests that civil commitment not only may save the lives of endangered patients but could also be a health-promoting measure that may sometimes allow for recovery from dependence. Unexpectedly, this measure was retrospectively well accepted by many patients, who considered the commitment decision as having been justified and useful.

Effectiveness of a specialized outpatient palliative care service as experienced by patients and caregivers.

Abstract Objectives: In Germany since 2007 patients with advanced life-limiting diseases are eligible for Specialized Outpatient Palliative Care (SOPC). To provide this service, SOPC teams have been established as a new facility in the health care system. The objective of this study was to evaluate the effectiveness of one of the first SOPC teams based at the Munich University Hospital. Methods: All patients treated by the SOPC team and their primary caregivers were eligible for this prospective nonrandomized study. The main topics of the surveys before and after involvement of the SOPC team were: for patients, the assessment of symptom burden (Minimal Documentation System for Palliative Medicine, MIDOS), satisfaction with quality of palliative care (Palliative Outcome Scale, POS), and quality of life (McGill Quality of Life Questionnaire, MQOL); for caregivers, burden of care (Häusliche Pflegeskala, home care scale, HPS), anxiety and depression (Hospital Anxiety and Depression Scale, HADS), and quality of life (Quality of Life in Life-Threatening Illness-Family Carer Version, QOLLTI-F). Results: Of 100 patients treated between April and November 2011, 60 were included in the study (median age 67.5 years, 55% male, 87% oncological diseases). In 23 of 60 patients, only caregivers could be interviewed. The median interval between the first and second interview was 2.5 weeks. Quality of life increased significantly in patients (p<0.05) and caregivers (p<0.001), as did the patients' perception of quality of palliative care (POS, p<0.001), while the caregivers' psychological distress and burden of care significantly decreased (HADS, p<0.001; HPS, p<0.001). Conclusions: The involvement of an SOPC team leads to a significant improvement in the quality of life of patients and caregivers and can lower the burden of home care for the caregivers of severely ill patients.

Development of a simulation tool for torsional vibration of branched power transmission system

In this master's thesis a mechanical model that is driven with variable speed synchronous machine was developed. The developed mechanical model simulates the mechanics of power transmission and its torsional vibrations. The mechanical model was developed for the need of the branched mechanics of a rolling mill and the propulsion system of a tanker. First, the scope of the thesis was to clarify the concepts connected to the mechanical model. The clarified concepts are the variable speed drive, the mechanics of power transmission and the vibrationsin the power transmission. Next, the mechanical model with straight shaft line and twelve moments of inertia that existed in the beginning was developed to be branched considering the case of parallel machines and the case of parallel rolls. Additionally, the model was expanded for the need of moreaccurate simulation to up to thirty moments of inertia. The model was also enhanced to enable three phase short circuit situation of the simulated machine. After that the mechanical model was validated by comparing the results of the developed simulation tool to results of other simulation tools. The compared results are the natural frequencies and mode shapes of torsional vibration, the response of the load torque step and the stress in the mechanical system occurred by the permutation of the magnetic field that is arisen from the three phase short circuit situation. The comparisons were accomplished well and the mechanical model was validated for the compared cases. Further development to be made is to develop the load torque to be time-dependent and to install two frequency converters and two FEM modeled machines to be simulated parallel.

Jäähdytysjärjestelmän vaikutus kiinteistön elinkaaren aikaisiin tuottoihin

Ilmastoinnin jäähdytys yleistyy toimisto- ja hotellikiinteistöissä jatkuvasti. Perinteinen tapa tuottaa jäähdytysenergia on kiinteistökohtainen vedenjäähdytysjärjestelmä. Helsingissä on ollut vuodesta 2000 lähtien mahdollista liittyä Helsingin energian kaukojäähdytysverkostoon. Jäähdytysjärjestelmien ominaisuudet poikkeavat toisistaan ja niistä aiheutuu kiinteistönomistajalle erilaisia kustannuksia. Kiinteistöstä saataviin tuottoihin vaikuttaa kustannusten lisäksi vuokralaisen tyytyväisyys. Tämän vuoksi työssä selvitettiin vuokralaisen tarpeet jäähdytysjärjestelmälle haastattelemalla vuokralaisen edustajia. Tässä diplomityössä vertaillaan kaukojäähdytyksen ja kiinteistökohtaisen jäähdytysjärjestelmän kustannuksia, sekä vaikutuksia kiinteistön elinkaarituottoihin kiinteistönomistajan näkökulmasta. Kerättyjen kustannusten perusteella suoritetaan elinkaarikustannuslaskenta GaBi-ohjelmalla. Vuokralaisen tarpeista jäähdytysjärjestelmälle tunnistetaan olennaisiksi toimintavarmuus, ympäristöystävällisyys sekä hiljainen äänitaso. Nämä ovat lisäarvotekijöitä, joille työssä määritetään painoarvo ja jotka huomioidaan laskennassa. Diplomityö osoitti kaukojäähdytyksen kannattavaksi vaihtoehdoksi kiinteistökohtaiselle järjestelmälle, kun huomioidaan hankinta- ja käyttökustannusten lisäksi asennustöiden, käyttöönoton, huollon ja kunnossapidon sekä loppusijoituksen kustannukset. Myös valikoituneet lisäarvotekijät puoltavat kaukojäähdytystä ja niiden kompensointi lisää kiinteistökohtaisen järjestelmän kustannuksia.

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Concentrative nucleoside transporter 1 (hCNT1) promotes phenotypic changes relevant to tumor biology in a translocation independent manner

Nucleoside transporters (NTs) mediate the uptake of nucleosides and nucleobases across the plasma membrane, mostly for salvage purposes. The canonical NTs belong to two gene families, SLC29 and SLC28. The former encode equilibrative nucleoside transporter proteins (ENTs), which mediate the facilitative diffusion of natural nucleosides with broad selectivity, whereas the latter encode concentrative nucleoside transporters (CNTs), which are sodium-coupled and show high affinity for substrates with variable selectivity. These proteins are expressed in most cell types, exhibiting apparent functional redundancy. This might indicate that CNTs play specific roles in the physiology of the cell beyond nucleoside salvage. Here, we addressed this possibility using adenoviral vectors to restore tumor cell expression of hCNT1 or a polymorphic variant (hCNT1S546P) lacking nucleoside translocation ability. We found that hCNT1 restoration in pancreatic cancer cells significantly altered cell-cycle progression and phosphorylation status of key signal-transducing kinases, promoted poly-(ADP ribose) polymerase hyperactivation and cell death, and reduced tumor growth and cell migration. Importantly, the translocation-defective transporter triggered these same effects on cell physiology. These data predict a novel and totally unexpected biological role for the nucleoside transporter protein hCNT1 that appears to be independent of its role as mediator of nucleoside uptake by cells, thereby suggesting a transceptor function. Cell Death & Disease Anastasis Stephanou Receiving Editor Cell Death & Disease 19th Apr 2013 Dr Perez-Torras Av/ Diagonal 643. Edif. Prevosti, Pl -1 Barcelona 08028 Spain RE: Manuscript CDDIS-13-0136R, 'CDDIS-13-0136R' Dear Dr Perez-Torras, It is a pleasure to inform you that your manuscript has been evaluated at the editorial level and has now been officially accepted for publication in Cell Death & Disease, pending you meet the following editorial requirements: 1) the list of the abbreviations is missing please include Could you send us the revised text as word file via e-mail and we will proceed and transfer the paper onto our typesetters. Please download, print, sign, and return the Licence to Publish Form using the link below. This must be returned via FAX to ++ 39 06 7259 6977 before your manuscript can be published:

13

Summary and conclusion: One of the main challenges facing the Swiss health care system remains continued fragmentation as a consequence of the federal structure and the division of responsibilities. This constitutes a major barrier for the implementation of a nationwide public health strategy and a more rational organization of health care. Much of the health reform agenda during the past decade was driven by cost-containment efforts. Despite the absence of a national regulatory framework targeting prevention and care of chronic diseases, national strategies and programmes have been developed within a growing recognition of the need to address chronic disease in the health care system. In addition, several small-scale pilot and preliminary structured care programmes have been implemented in selected localities. The latter are however still too few and limited in scope to cover the needs of the majority of patients with chronic diseases residing in Switzerland. Given the continued high satisfaction with the system among health care users, of around 80%, pressure to actually initiate larger scale changes might not yet be sufficiently strong.

A simple halide-to-anion exchange method for heteroaromatic salts and ionic liquids

A broad and simple method permitted halide ions in quaternary heteroaromatic and ammonium salts to be exchanged for a variety of anions using an anion exchange resin (A− form) in non-aqueous media. The anion loading of the AER (OH− form) was examined using two different anion sources, acids or ammonium salts, and changing the polarity of the solvents. The AER (A− form) method in organic solvents was then applied to several quaternary heteroaromatic salts and ILs, and the anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Relying on the hydrophobicity of the targeted ion pair for the counteranion swap, organic solvents with variable polarity were used, such as CH3OH, CH3CN and the dipolar nonhydroxylic solvent mixture CH3CN:CH2Cl2 (3:7) and the anion exchange was equally successful with both lipophilic cations and anions.