Modeling bipolar power semiconductor devices gachovska

This book presents physics-based models of bipolar power semiconductor devices and their implementation in MATLAB and Simulink. The devices are subdivided into different regions, and the operation in each region, along with the interactions at the interfaces which are analyzed using basic semiconductor physics equations that govern their behavior. The Fourier series solution is used to solve the ambipolar diffusion equation in the lightly doped drift region of the devices. In addition to the external electrical characteristics, internal physical and electrical information, such as the junction voltages and the carrier distribution in different regions of the device, can be obtained using the models. Table of Contents: Introduction to Power Semiconductor Device Modeling/Physics of Power Semiconductor Devices/Modeling of a Power Diode and IGBT/IGBT Under an Inductive Load-Switching Condition in Simulink/Parameter Extraction. © 2013 by Morgan & Claypool.

Thyristors

Thyristors are usually three-terminal devices that have four layers of alternating p-type and n-type material (i.e. three p-n junctions) comprising its main power handling section. In contrast to the linear relation which exists between load and control currents in a transistor, the thyristor is bistable. The control terminal of the thyristor, called the gate (G) electrode, may be connected to an integrated and complex structure as a part of the device. Thyristors are used to approximate ideal closed (no voltage drop between anode and cathode) or open (no anode current flow) switches for control of power flow in a circuit. This differs from low-level digital switching circuits that are designed to deliver two distinct small voltage levels while conducting small currents (ideally zero). Thyristor circuits must have the capability of delivering large currents and be able to withstand large externally applied voltages. All thyristor types are controllable in switching from a forward-lockingstate (positive potential applied to the anode with respect to the cathode, with correspondingly little anode current flow) into a forward-conduction state (large forward anode current flowing, with a small anode-cathode potential drop). Most thyristors have the characteristic that after switching from a forward-blocking state into the forward-conduction state, the gate signal can be removed and the thyristor will remain in its forward-conduction mode. This property is termed "latching" and is an important distinction between thyristors and other types of power electronic devices. © 2007 Elsevier Inc. All rights reserved.

Imaging the failure of a rock-fill dam following liquefaction

Rock-fill dams are popular in developing countries due to their ease of construction and use of local materials. They are used to store water and to provide flood defences. The presence of such dams in earthquake-prone regions poses risks, particularly from ground liquefaction. In this paper, results from physical model tests on dams with different configurations are presented. Model dams with impermeable cores including sheet pile walls and clay cores were tested and the effect of reservoir water was investigated. High-speed photography was used to capture the response of the model dams allowing the movement of foundation soil below the dam to be established. It is concluded that the stiffness of the impermeable core has a significant influence on the ultimate deformation of the dam. The presence of reservoir water led to increased downstream movements of the dam and differential settlements between the upstream and downstream sides.

Current research in embankment dam engineering at imperial college London

This paper gives a short introduction to two research streams in embankment dam engineering underway at Imperial College London. The first is the modelling of embankment dam behaviour during earthquakes and the second is an investigation into the susceptibility of granular filters to internal erosion. The research motivation, methods and expected outcomes of each stream are discussed.

Cloning and characterization of interferon stimulated genes Viperin and ISG15, and their promoters from snakehead Channa argus

By suppression subtractive hybridization, rapid amplification of cDNA ends and gene walking methods, interferon stimulated genes (ISGs), Viperin and ISG15, and their promoters have been cloned and characterized from snakehead Channa argus. The Viperin cDNA was found to be 1474 nt and contain an open reading frame (ORF) of 1059 nt that translates into a putative peptide of 352 amino acid (aa). The putative peptide of Viperin shows high identity to that in teleosts and mammals except for the N-terminal 70 aa. The ISG15 cDNA was found to be 758 nt and contain an ORF of 468 nt that translates into a putative peptide of 155 aa. The putative peptide of ISG15 is composed of two tandem repeats of ubiquitin-like (UBL) domains, and a canonical conjugation motif (LRGG) at C-terminal. Viperin and ISG15 promoter regions were characterized by the presence of interferon stimulating response elements (ISRE) and gamma-IFN activation sites (GAS). ISRE is a feature of IFN-induced gene promoter and partially overlaps interferon regulatory factor (IRF) 1 and IRF2 recognition sites. GAS is responsible for the gamma-IFN mediated transcription. One conserved site for NF-kappa B was found in the promoter region of Viperin. This is the first report of conservative binding motif for NF-kappa B in accordance with the consensus sequence (GGGRN-NYYCC) among teleost ISG promoters. Moreover, there were also TATA, CAAT and Sp1 transcription factor sites in Viperin and ISG15 promoters. In 5' untranslated region (UTR), snakehead ISG15 gene contains a single intron, which differs from Viperin gene. The transcripts of Vipeirn and ISG15 mRNA were mainly expressed in head kidney, posterior kidney, spleen and gill. The expression levels in liver were found to increase obviously in response to induction by IFN-inducer poly I : C.

Effects of microcystin-RR on the antioxidant system of Bacillus subtilis

Microcystins are a kind of cyclic hepatotoxins produced by many cyanobacterial species. Many works have been done concerning, the toxic effects of microcystins on animals and plants. However, the reports about their effects on microbial cells are very limited. In the present paper, Bacillus subtilis (B. subtilis) was used to determine the dose- and time-effect of microcystin-RR, and the results showed that the activity of antioxidant enzymes including superoxide dismutase (SOD) and catalase (CAT) was significantly increased to that of control, when exposed to 5 or 10 mu g/ml microcystin-RR for 1 h. The contents of thiobarbituric acid-reactive sub-stances (TBARS) and glutathione (GSH) as well as glu-tathione reductase (GR) activity were obviously increased only when exposed to 10 mu g/ml microcystin-RR. For the time-effect of microcystin-RR on B. subtilis, the activities of antioxidant enzymes including SOD and CAT as well as GR activity and TBARS, GSH contents in B. subtilis were at first significantly increased, and then subsequently de-creased. These results suggested that microcystin-RR could induce the oxidative stress of B. subtilis for a short period. The antioxidant system protects B. subtilis from oxidative damage.

A framework for the analysis of thermal losses in reciprocating compressors and expanders

This article presents a framework that describes formally the underlying unsteady and conjugate heat transfer processes that are undergone in thermodynamic systems, along with results from its application to the characterization of thermodynamic losses due to irreversible heat transfer during reciprocating compression and expansion processes in a gas spring. Specifically, a heat transfer model is proposed that solves the one-dimensional unsteady heat conduction equation in the solid simultaneously with the first law in the gas phase, with an imposed heat transfer coefficient taken from suitable experiments in gas springs. Even at low volumetric compression ratios (of 2.5), notable effects of unsteady heat transfer to the solid walls are revealed, with thermally induced thermodynamic cycle (work) losses of up to 14% (relative to the work input/output in equivalent adiabatic and reversible compression/expansion processes) at intermediate Péclet numbers (i.e., normalized frequencies) when unfavorable solid and gas materials are selected, and closer to 10-12% for more common material choices. The contribution of the solid toward these values, through the conjugate variations attributed to the thickness of the cylinder wall, is about 8% and 2% points, respectively, showing a maximum at intermediate thicknesses. At higher compression ratios (of 6) a 19% worst-case loss is reported for common materials. These results suggest strongly that in designing high-efficiency reciprocating machines the full conjugate and unsteady problem must be considered and that the role of the solid in determining performance cannot, in general, be neglected. © 2014 Richard Mathie, Christos N. Markides, and Alexander J. White. Published with License by Taylor & Francis.

Self-aligned current aperture in native oxidized AlInAs buried heterostructure InGaAsP/InP distributed feedback laser

A InGaAsP/InP self-aligned, native oxidized buried heterostructure (BH) distributed feedback (DFB) laser is proposed. It is as easy to process as the ridge waveguide DFB laser and has superior performance. The current aperture can be easily controlled without selective regrowth. The laser exhibits a low threshold of 5.0 mA with 36 dB side mode suppression ratio at the emission wavelength of 1.562 mu m. It emits in a single lobe with full width at half maximum angles of 33.6 degrees and 42.6 degrees for the lateral and vertical fields, respectively. Its beam is more circular than that of the as-grown BH laser because the lower refractive index of oxide compared to the as-grown layer and results in a larger lateral optical confinement. Its characteristic temperature (T-0) is 50 K at room temperature but increases in value at the higher temperature range. (C) 2000 American Institute of Physics. [S0003-6951(00)00812-3].

Face recognition based on PCA and multi-degree of freedom neurons

An algorithm of PCA face recognition based on Multi-degree of Freedom Neurons theory is proposed, which based on the sample sets' topological character in the feature space which is different from "classification". Compare with the traditional PCA+NN algorithm, experiments prove its efficiency.

automated test case generation for the stress testing of multimedia systems

With the advancement in network bandwidth and computing power, multimedia systems have become a popular means for information delivery. However, general principles of system testing cannot be directly applied to testing of multimedia systems on account of their stringent temporal and synchronization requirements. In particular, few studies have been made on the stress testing of multimedia systems with respect to their temporal requirements under resource saturation. Stress testing is important because erroneous behavior is most likely to occur under resource saturation. This paper presents an automatable method of test case generation for the stress testing of multimedia systems. It adapts constraint solving techniques to generate test cases that lead to potential resource saturation in a multimedia system. Coverage of the test cases is defined upon the reachability graph of a multimedia system. The proposed stress testing technique is supported by tools and has been successfully applied to a real-life commercial multimedia system. Although our technique focuses on the stress testing of multimedia systems, the underlying issues and concepts are applicable to other types of real-time systems.