Transmission of single HIV-1 genomes and dynamics of early immune escape revealed by ultra-deep sequencing.

We used ultra-deep sequencing to obtain tens of thousands of HIV-1 sequences from regions targeted by CD8+ T lymphocytes from longitudinal samples from three acutely infected subjects, and modeled viral evolution during the critical first weeks of infection. Previous studies suggested that a single virus established productive infection, but these conclusions were tempered because of limited sampling; now, we have greatly increased our confidence in this observation through modeling the observed earliest sample diversity based on vastly more extensive sampling. Conventional sequencing of HIV-1 from acute/early infection has shown different patterns of escape at different epitopes; we investigated the earliest escapes in exquisite detail. Over 3-6 weeks, ultradeep sequencing revealed that the virus explored an extraordinary array of potential escape routes in the process of evading the earliest CD8 T-lymphocyte responses--using 454 sequencing, we identified over 50 variant forms of each targeted epitope during early immune escape, while only 2-7 variants were detected in the same samples via conventional sequencing. In contrast to the diversity seen within epitopes, non-epitope regions, including the Envelope V3 region, which was sequenced as a control in each subject, displayed very low levels of variation. In early infection, in the regions sequenced, the consensus forms did not have a fitness advantage large enough to trigger reversion to consensus amino acids in the absence of immune pressure. In one subject, a genetic bottleneck was observed, with extensive diversity at the second time point narrowing to two dominant escape forms by the third time point, all within two months of infection. Traces of immune escape were observed in the earliest samples, suggesting that immune pressure is present and effective earlier than previously reported; quantifying the loss rate of the founder virus suggests a direct role for CD8 T-lymphocyte responses in viral containment after peak viremia. Dramatic shifts in the frequencies of epitope variants during the first weeks of infection revealed a complex interplay between viral fitness and immune escape.

Specializing pedestrian maps to address the needs of people using wheelchairs: a case study in community-sustainable information systems

Gemstone Team FASTR (Finding Alternative Specialized Travel Routes)

Neuroimaging assessment of early and late neurobiological sequelae of traumatic brain injury: implications for CTE.

Traumatic brain injury (TBI) has been increasingly accepted as a major external risk factor for neurodegenerative morbidity and mortality. Recent evidence indicates that the resultant chronic neurobiological sequelae following head trauma may, at least in part, contribute to a pathologically distinct disease known as Chronic Traumatic Encephalopathy (CTE). The clinical manifestation of CTE is variable, but the symptoms of this progressive disease include impaired memory and cognition, affective disorders (i.e., impulsivity, aggression, depression, suicidality, etc.), and diminished motor control. Notably, mounting evidence suggests that the pathology contributing to CTE may be caused by repetitive exposure to subconcussive hits to the head, even in those with no history of a clinically evident head injury. Given the millions of athletes and military personnel with potential exposure to repetitive subconcussive insults and TBI, CTE represents an important public health issue. However, the incidence rates and pathological mechanisms are still largely unknown, primarily due to the fact that there is no in vivo diagnostic tool. The primary objective of this manuscript is to address this limitation and discuss potential neuroimaging modalities that may be capable of diagnosing CTE in vivo through the detection of tau and other known pathological features. Additionally, we will discuss the challenges of TBI research, outline the known pathology of CTE (with an emphasis on Tau), review current neuroimaging modalities to assess the potential routes for in vivo diagnosis, and discuss the future directions of CTE research.

Associations between BMI and home, school and route environmental exposures estimated using GPS and GIS: do we see evidence of selective daily mobility bias in children?

BACKGROUND: This study examined whether objective measures of food, physical activity and built environment exposures, in home and non-home settings, contribute to children's body weight. Further, comparing GPS and GIS measures of environmental exposures along routes to and from school, we tested for evidence of selective daily mobility bias when using GPS data. METHODS: This study is a cross-sectional analysis, using objective assessments of body weight in relation to multiple environmental exposures. Data presented are from a sample of 94 school-aged children, aged 5-11 years. Children's heights and weights were measured by trained researchers, and used to calculate BMI z-scores. Participants wore a GPS device for one full week. Environmental exposures were estimated within home and school neighbourhoods, and along GIS (modelled) and GPS (actual) routes from home to school. We directly compared associations between BMI and GIS-modelled versus GPS-derived environmental exposures. The study was conducted in Mebane and Mount Airy, North Carolina, USA, in 2011. RESULTS: In adjusted regression models, greater school walkability was associated with significantly lower mean BMI. Greater home walkability was associated with increased BMI, as was greater school access to green space. Adjusted associations between BMI and route exposure characteristics were null. The use of GPS-actual route exposures did not appear to confound associations between environmental exposures and BMI in this sample. CONCLUSIONS: This study found few associations between environmental exposures in home, school and commuting domains and body weight in children. However, walkability of the school neighbourhood may be important. Of the other significant associations observed, some were in unexpected directions. Importantly, we found no evidence of selective daily mobility bias in this sample, although our study design is in need of replication in a free-living adult sample.

Layers of generality and types of generalization in pattern activities

Pattern generalization is considered one of the prominent routes for in-troducing students to algebra. However, not all generalizations are al-gebraic. In the use of pattern generalization as a route to algebra, we —teachers and educators— thus have to remain vigilant in order not to confound algebraic generalizations with other forms of dealing with the general. But how to distinguish between algebraic and non-algebraic generalizations? On epistemological and semiotic grounds, in this arti-cle I suggest a characterization of algebraic generalizations. This char-acterization helps to bring about a typology of algebraic and arithmetic generalizations. The typology is illustrated with classroom examples.

A 3/2 algorithm for two-machine open shop with route-dependent processing times

This paper considers the problem of minimizing the schedule length of a two-machine shop in which not only can a job be assigned any of the two possible routes, but also the processing times depend on the chosen route. This problem is known to be NP-hard. We describe a simple approximation algorithm that guarantees a worst-case performance ratio of 2. We also present some modifications to this algorithm that improve its performance and guarantee a worst-case performance ratio of 3=2.

CAPLib - A 'thin layer' message passing library to support computational mechanics codes on distributed memory parallel systems

The Computer Aided Parallelisation Tools (CAPTools) [Ierotheou, C, Johnson SP, Cross M, Leggett PF, Computer aided parallelisation tools (CAPTools)-conceptual overview and performance on the parallelisation of structured mesh codes, Parallel Computing, 1996;22:163±195] is a set of interactive tools aimed to provide automatic parallelisation of serial FORTRAN Computational Mechanics (CM) programs. CAPTools analyses the user's serial code and then through stages of array partitioning, mask and communication calculation, generates parallel SPMD (Single Program Multiple Data) messages passing FORTRAN. The parallel code generated by CAPTools contains calls to a collection of routines that form the CAPTools communications Library (CAPLib). The library provides a portable layer and user friendly abstraction over the underlying parallel environment. CAPLib contains optimised message passing routines for data exchange between parallel processes and other utility routines for parallel execution control, initialisation and debugging. By compiling and linking with different implementations of the library, the user is able to run on many different parallel environments. Even with today's parallel systems the concept of a single version of a parallel application code is more of an aspiration than a reality. However for CM codes the data partitioning SPMD paradigm requires a relatively small set of message-passing communication calls. This set can be implemented as an intermediate `thin layer' library of message-passing calls that enables the parallel code (especially that generated automatically by a parallelisation tool such as CAPTools) to be as generic as possible. CAPLib is just such a `thin layer' message passing library that supports parallel CM codes, by mapping generic calls onto machine specific libraries (such as CRAY SHMEM) and portable general purpose libraries (such as PVM an MPI). This paper describe CAPLib together with its three perceived advantages over other routes: - as a high level abstraction, it is both easy to understand (especially when generated automatically by tools) and to implement by hand, for the CM community (who are not generally parallel computing specialists); - the one parallel version of the application code is truly generic and portable; - the parallel application can readily utilise whatever message passing libraries on a given machine yield optimum performance.

Advanced evacuation simulation software and its use in warships

The newly formed Escape and Evacuation Naval Authority regulates the provision of abandonment equipment and procedures for all Ministry of Defence Vessels. As such, it assures that access routes on board are evaluated early in the design process to maximize their efficiency and to eliminate, as far as possible, any congestion that might occur during escape. This analysis can be undertaken using a computer-based simulation for given escape scenarios and replicates the layout of the vessel and the interactions between each individual and the ship structure. One such software tool that facilitates this type of analysis is maritimeEXODUS. This tool, through large scale testing and validation, emulates human shipboard behaviour during emergency scenarios; however it is largely based around the behaviour of civilian passengers and fixtures and fittings of merchant vessels. Hence there existed a clear requirement to understand the behaviour of well-trained naval personnel as opposed to civilian passengers and be able to model the fixtures and fittings that are exclusive to warships, thus allowing improvements to both maritimeEXODUS and other software products. Human factor trials using the Royal Navy training facilities at Whale Island, Portsmouth were recently undertaken to collect data that improves our understanding of the aforementioned differences. It is hoped that this data will form the basis of a long-term improvement package that will provide global validation of these simulation tools and assist in the development of specific Escape and Evacuation standards for warships. © 2005: Royal Institution of Naval Architects.

Implementation of cognitive mapping, spatial representation and wayfinding behaviours of people within evacuation modelling tools

Within the building evacuation context, wayfinding describes the process in which an individual located within an arbitrarily complex enclosure attempts to find a path which leads them to relative safety, usually the exterior of the enclosure. Within most evacuation modelling tools, wayfinding is completely ignored; agents are either assigned the shortest distance path or use a potential field to find the shortest path to the exits. In this paper a novel wayfinding technique that attempts to represent the manner in which people wayfind within structures is introduced and demonstrated through two examples. The first step is to encode the spatial information of the enclosure in terms of a graph. The second step is to apply search algorithms to the graph to find possible routes to the destination and assign a cost to the routes based on their personal route preferences such as "least time" or "least distance" or a combination of criteria. The third step is the route execution and refinement. In this step, the agent moves along the chosen route and reassesses the route at regular intervals and may decide to take an alternative path if the agent determines that an alternate route is more favourable e.g. initial path is highly congested or is blocked due to fire.

The Catford Riddim on the 202

This presentation is about a song, ”Catford Riddim” by the A-Team, a group of grime artists from South London, specifically about how it came to be played, perhaps a bit too loudly, in the back of the 202 bus one January morning on a teenager’s mobile phone. As an illustration of how social networks and technological networks converge, the ”Catford Riddim,” insisting on the music’s own provenance from the SE6 postcode, shows the formation of a local ethnoscape in the global networks of peer-to-peer file sharing and online DIY distribution sites such as MySpace. Contesting the narrative of online social networks as routes to fame, I suggest that on the contrary they illustrate the emergence of local, even insular, ”scenes” of musicians, events and audiences.

Metal oxide photoanodes for solar hydrogen production

The development of sustainable hydrogen production is a key target in the further facilitation of a hydrogen economy. Solar hydrogen generation through the photolytic splitting of water sensitised by semiconductor materials is attractive as it is both renewable and does not lead to problematic by-products, unlike current hydrogen sources such as natural gas. Consequently, the development of these semiconductor materials has undergone considerable research since their discovery over 30 years ago and it would seem prescient to review the more practical results of this research. Among the critical factors influencing the choice of semiconductor material for photoelectrolysis of water are the band-gap energies, flat band potentials and stability towards photocorrosion; the latter of these points directs us to focus on metal oxides. Careful design of thin films of photocatalyst material can eliminate potential routes of losses in performance, i.e., recombination at grain boundaries. Methods to overcome these problems are discussed such as coupling a photoanode for photolysis of water to a photovoltaic cell in a 'tandem cell' device.

Organometallic pincer-type complexes: recent applications in synthesis and catalysis

YCY pincer palladacycles, where YCY is typically an SCS, NCN, PCP, SeCSe anionic six-electron donor ligand (e.g. see 1-6, Scheme 1.1), are a well-established family of organometallic complexes with manifold applications in catalysis, synthesis and materials science [1-24]. Their synthesis can be achieved by many routes including C-H activation, oxidative addition, transmetalation and trans-cyclopalladation [25].

Assessment of the potential impacts of coasteering on rocky intertidal habitats in Wales

The relatively new recreational pursuit of coasteering, which has developed in the St David's area of Pembrokeshire, appears to be expanding rapidly. The majority of local commercial recreation providers (outdoor pursuit centers etc.) now appear to offer this pursuit. The majority of the rocky coastlines where it takes place lie within Pembrokeshire Marine Special Area of Conservation (SAC), and are also Sites of Special Scientific Interest (SSSI). No assessment has yet been undertaken of coasteering's potential impact on the intertidal habitats. Therefore the Countryside Council for Wales (CCW) commissioned the Marine Life Information Network (MarLIN) to undertake a desk study of the likely environmental effects of coasteering on rocky intertidal habitats within the Pembrokeshire marine SAC. The desk study was based on a review of the available literature, and in particular the effects of trampling on rocky intertidal communities. Communities (as biotopes) within the Pembrokeshire marine SAC likely to be exposed to coasteering activities were identified from Phase I biotope data for the area, provided by CCW. Where possible, existing research by MarLIN into the intolerance, recoverability and sensitivity of the biotopes identified, was used to identify their potential vulnerability to trampling. The literature review revealed that: - foliose canopy forming algae (e.g. fucoids) were particularly intolerant and sensitive to trampling impacts; - trampling damaged erect coralline turfs, barnacles, and resulted in an increase in bare space; in some cases paths across the shore were visible; - on brown algae dominated shores, understorey algae could suffer due to increased desiccation but algal turf species, opportunists and gastropod grazers (e.g. limpets) could increase in abundance as an indirect effect of trampling, and that - trampling impacts resulted from physical contact and wear and were dependant on the intensity, duration, and frequency of trampling, and even the type of footwear used. A total of 19 intolerant rocky intertidal biotopes were identified as potentially vulnerable to trampling and hence coasteering within the Pembrokeshire marine SAC, of which six are of Welsh importance and eight are nationally rare or scarce. Trampling is a highly localized impact and it was not possible to identify biotopes, and hence communities, actually impacted by coasteering activities in the Pembrokeshire marine SAC. In addition, the majority of the literature addresses the impacts of trampling on wave sheltered or moderately exposed brown algal dominated shores, while coasteering occurs on more wave exposed, steeply inclined shores. Therefore, direct survey of the routes used by coasteering groups within the Pembrokeshire marine SAC is required to identify the intensity, duration and frequency of trampling impact, together with the communities impacted. Given the paucity of data concerning trampling effects in the rocky intertidal in the UK, a survey of the impacts of coasteering would provide an opportunity to examine the effects of trampling and visitor use in steep rocky, wave exposed shores. The report recognizes the potential to engage coasteerers in contributing to the development of strategies for minimizing adverse impacts, recording impacts and collecting information of use in identifying climate change and the occurrence of non-native species.

Partitioning, bioavailability and effects of oestrogens and xeno-oestrogens in the aquatic environment

This review provides insights into the distribution and impact of oestrogens and xeno-oestrogens in the aquatic environment and highlights some significant knowledge gaps in our understanding of endocrine disrupting chemicals. Key areas of uncertainty in the assessment of risk include the role of estuarine sediments in mediating the fate and bioavailability of environmental (xeno)oestrogens (notably their transfer to benthic organisms and estuarine food chains), together with evidence for endocrine disruption in invertebrate populations. Emphasis is placed on using published information to interpret the behaviour and effects of a small number of model compounds thought to contribute to oestrogenic effects in nature; namely, the natural steroid 17 beta -oestradiol (E2) and the synthetic hormone 17 alpha -ethinyloestradiol (EE2), together with the alkyl-phenols octyl- and nonyl-phenol (OP, NP) as oestrogen mimics. Individual sections of the review are devoted to sources and concentrations of (xeno)oestrogens in waterways, sediment partitioning and persistence, bioaccumulation rates and routes, assays and biomarkers of oestrogenicity, and, finally, a synopsis of reproductive and ecological effects in aquatic species.

An overview of plankton ecology in the North Sea

The purpose of this report is to give an overview of plankton ecology in the North Sea, and the processes that effect it, as derived from current research. The Sir Alister Hardy Foundation has extensive data for the North Sea area, and other sources have also been used to provide information for this report. Shortfalls in current research have also been highlighted. The information contained herein is to be contributed towards an information base for the Strategic Environmental Assessment. The North Sea is an extension of the North Atlantic that has an area of 574,980 km2. The deepest area is off the coast of Norway (660m), with a number of shallow areas, such as the Dogger Bank (15m). The North Sea represents a large source of hydrocarbons that have been exploited since the early 1970s. The aim of this study is to provide the Department of Trade and Industry with biological data on the planktonic community of the North Sea, as a contribution towards the Strategic Environmental Assessment (SEA 2). An overview of phyto- and zoo- plankton community composition, plankton blooms, Calanus, mero-, pico- and megaplankton, sensitivity to disturbance / contamination, phytodetritus and vertical fluxes and the resting stages of phytoplankton is made using the results of the survey database. Additional published literature has also been used, and gaps in available data have been highlighted. 1.3 The Continuous Plankton Recorder (CPR) survey provides a unique long-term dataset of plankton abundance in the North Atlantic and North Sea (Warner and Hays 1994). The survey has been running for almost 70 years, using ‘ships of opportunity’ to tow CPRs on regular, and incidental routes, sampling at a depth of 10 m. Each sample represents 18 km of tow and approximately 3 m3 of filtered seawater. Over 400 taxa of plankton are routinely identified by a team of taxonomists. The samples are also compared to colour charts to give an indication of ‘greenness’, which provides a visual index of chlorophyll value. CPRs have been towed for over 4 million nautical miles, accumulating almost 200,000 samples. The design of the CPR has remained virtually unchanged since sampling started, thus providing a consistency of sampling that provides good historical comparisons. By systematically monitoring the plankton over a period, changes in abundance and long term trends can be distinguished. From this baseline data, inferences can be made, particularly concerning climate change and potentialanthropogenic impacts.