A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression

Desgaste corrosivo-cavitativo-erosivo de um aço-carbono em meio aquoso com frações de sal (NaCl), CO2 e particulados sólidos (SiO2)

A batch of eighty-four coupons of low carbon steel were investigated at laboratory conditions under a corrosive, cavitative-corrosive (CO2) and corrosive-erosive (SiO2 + CO2) in an aqueous salt solution and two levels of temperature. The following measurements were made on Vickers (HV0,05, HV0,10, HV0,20) Microhardness tests at three levels of subsurface layer. A turbulent flow collided on the cylindrical sample, with and without mechanical stirring and gas bubbling, with and without fluid contamination by solid particles of SiO2, at two temperatures. Surface Roughness and Waviness, under two conditions "as received, after machining" and "after worn out", as well as gravimetric and electrochemical parameter were measured on the two opposite generatrices of each cylindrical sample, on the flow upstream (0°) and downstream (180°) by Profilometry, Mass Variation and Linear Polarization Resistance (LPR). The results of the Microhardness and Surface Texture of all coupons were subjected to statistical comparison, using the software Statgraphics® Centurion XVI, 95% statistical certainty, and significant differences were observed in some arrays of measurements. The corrosive wear rate measured by LPR and mass variation shown to be sensitive to the presence of bubbles and hydrodynamic fluctuations inside the cell, considering the temperature and contamination of corrosive fluid by solid particles. The main results of visual inspection relative to some topologies of the surface damages involving different mechanisms that were seen to give explanation for some fluctuations in wear rates of the steel experimentally investigated

Consumo máximo de oxigênio e limiar anaeróbio de jogadores de futebol: comparação entre as diferentes posições

O grau de desenvolvimento das capacidades físicas no futebol é fator determinante do nível desportivo do jogador. O objetivo do presente estudo foi comparar valores de limiar anaeróbio e consumo máximo de oxigênio entre jogadores profissionais de futebol de diferentes posições. Para tanto, 25 atletas (idade = 22,08 ± 8,28 anos, peso = 76,12 ± 9,8kg, altura = 179,8 ± 7,1cm e relação corporal = 12,21 ± 3,67% de gordura corporal) foram divididos em cinco grupos, como se segue: goleiros (GO), zagueiros (ZA), laterais (LA), meio-campistas (MC) e atacantes (AT). O VO2max foi determinado em esteira ergométrica através de análise direta e a velocidade de corrida correspondente ao limiar anaeróbio fixo de 4mM (V4mM), em teste de campo (2 x 1.000m a 90 e 95% da velocidade máxima para a distância) através de interpolação linear. A V4mM foi menor (p < 0,05) para o grupo GO em relação aos demais grupos. Além disso, os grupos LA e MC apresentaram valores de V4mM significantemente maiores em relação aos grupos ZA e AT. O grupo GO mostrou VO2max significantemente menor em relação a todos os outros grupos, sendo que estes últimos não apresentaram diferença entre si. Uma vez que os atletas de diferentes posições não realizavam treinamento diferenciado, os autores creditam as diferenças encontradas à especificidade da movimentação durante partidas e coletivos.

Sugarcane bagasse ash as a potential quartz replacement in red ceramic

Sugarcane bagasse ash (SCBA) is an industrial waste that contains silicon and aluminum oxides as the major components and iron, calcium, magnesium, and potassium oxides as the main minor components. In this paper, SCBA from one Brazilian factory was characterized and tested for its influence on the ceramic properties of clay/ash ceramic probes. Prismatic probes were pressed (18 MPa) using a ceramic mass mixed with 0%, 5%, 8%, and 10% ash. The probes were fired at temperatures between 800 degrees and 1200 degrees C. X-ray diffraction, X-ray fluorescence, thermal analysis (differential thermal analysis, thermo-gravimetric analysis/differential thermogravimetric analysis), and tests for texture (particle-size analysis), flexural strength, and linear shrinkage were carried out to characterize the samples. The results showed that the amount of ash to be incorporated will depend on mainly the composition of clay but also ash, and indicated that the clay used in this work can incorporate up to 10% weight of ash to produce solid bricks. The results also showed an improvement in ceramic/ash properties up to sintering temperatures higher than 1000 degrees C.

Características sociodemográficas, hábitos de sono, estado cognitivo e funcional após acidente vascular cerebral

ABSTRACT Introduction: The cerebrovascular accident (CVA) is an important cause of neurological impairment. Few data about the factors associated with morbidity of cerebrovascular accident are found in Brazil. Objectives: Evaluate sociodemographic characteristics, sleep habits, cognitive and functional status of patients with cerebrovascular accident. Methods: The patients evaluated through questionnaire Step 1 to survey the sociodemographic characteristics and Modified Rankin Scale for functional assessment. The neurological degree was evaluated by the National Institutes of Health Stroke Scale (NIHSS), the sleep Habits questionnaire for sleep and cognitive status by the Mini-Examination of the Mental State (MEMS). The data were analyzed using the chi-square test to determine differences in proportions of variables and linear regression analysis. Results: 305 patients were evaluated and the larger number of subjects was between 50 and 69 years (40%), most patients had no formal education (40.3%) and had ischemic type of cerebrovascular accident (72.5%). In the analysis of the functionality it was found that most patients had moderate impairment (55.1%). The results of the sleep habits showed that 63,6% of patients had one more person in the bedroom,12,3% complained about too much noise in the 11 room and 35% of too much light. From these patients 5,8% were smokers, 7,8% and 70,1% drank coffee drinkers, 28,6% had difficulty in initiate to sleep and woke up 37,6% in the middle of the night. Were showed complaints about nightmares (11%), feeling of suffocation (37,7%) and 35% felt very sleepy during the day. In addition, 95% were unemployed, 80,5% did not perform physical activities and 95,4% did not perform mental activities. The cognitive screening conducted a determined association of cognitive status with age and education level and neurological status. Conclusion: The study showed a high frequency of cases of cerebrovascular accident with functional dependence in a moderate degree, identified that many patients do not follow hygienic measures of sleep and found that the assessment of cognitive deficits must take into consideration the age, educational level and degree of neurological patients. We suggest the need for programs of assistance to victims of cerebrovascular accident patients, with a multidimensional approach including the rehabilitation team, the role of sleep medicine and Neuropsychology, so that patients have access to a more appropriate functional rehabilitation, develop a lifestyle that ensures a good sleep quality and are evaluated and rehabilitated with regard to cognitive impairment

Attitude stability of artificial satellites subject to gravity gradient torque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis of PID controllers for a class of time delay systems

In this paper we use the Hermite-Biehler theorem to establish results on the design of proportional plus integral plus derivative (PID) controllers for a class of time delay systems. Using the property of interlacing at high frequencies of the class of systems considered and linear programming we obtain the set of all stabilizing PID controllers. As far as we know, previous results on the synthesis of PID controllers rely on the solution of transcendental equations. This paper also extends previous results on the synthesis of proportional controllers for a class of delay systems of retarded type to a larger class of delay systems. (C) 2009 Elsevier Ltd. All rights reserved.

Avaliação do comportamento de argila ativada na presença de água destilada, soluções salinas e inibidores de hidratação catiônicos

The clay swelling is today one of the major problems during the well drilling. Nearly 50% of clays that constitute shale expand easily in the presence of water molecules. During the drilling of a geological formation containing swelling clays, when is feasible the use of water base fluids, it is necessary to apply clay inhibitors. This avoids the incorporation of the cutting to the drilling fluid which is responsible for the wall swelling and crumbling. The aim of this work was to evaluate the synergistic behavior that occurs when swelling clay inhibitors are associated to NaCl and KCl salts. Three swelling clay inhibitors samples, INIB A, INIB B and INIB C, were analyzed. Each inhibitor was characterized by the amount of chlorides and active matter content. For the water-clay interaction evaluation in the presence of various fluids, it was used the Capillary Suction Timer (CST, Fann) and Linear Swell Meter (LSM 2000, Fann). For better interpretation of results, a Design of Experiments (DOE, Umetrics MODDE 7.0 TM) through Result Surface Methodology (RSM) was employed, taking into account the type, the swelling inhibitors concentration and the contact time with the clay. The results showed different efficiencies among the inhibitors employed, and the salt-inhibitors mixtures were more efficient than those products alone. However, for field operation, other parameters should be taking into account, as operational cost, environmental requests and time of application for each product

Relações entre produtividade de sorgo forrageiro e atributos físicos e teor de matéria orgânica de um latossolo do cerrado

Os atributos físicos e a matéria orgânica do solo influenciam no crescimento e desenvolvimento vegetal, limitando o crescimento de raízes e a produtividade das culturas. Objetivando-se estudar a variabilidade espacial e correlações lineares entre a produtividade do sorgo forrageiro e os atributos físicos e matéria orgânica do solo, realizou-se um experimento em Latossolo Vermelho distroférrico, no município de Selvíria (MS), na safrinha de 2005. Para tanto, estimou-se a produtividade de matéria fresca e seca do sorgo forrageiro, a microporosidade, macroporosidade, porosidade total, densidade e teor de matéria orgânica do solo, em três profundidades (0,00-0,10 m; 0,10-0,20 m; e 0,20-0,30 m). As amostras foram coletadas em uma malha geoestatística, com total de 124 pontos, em área de 4.000 m². As produtividades de matéria fresca e seca apresentaram elevada variabilidade, enquanto, para os atributos do solo, em geral, a variabilidade foi baixa. Os atributos da planta, a macroporosidade (nas primeiras camadas), microporosidade, porosidade total e densidade total, na primeira e terceira camadas, seguiram padrões espaciais bem definidos, com alcances estabelecidos entre 17,9 m e 84,2 m, enquanto os demais atributos apresentaram efeito pepita puro. A correlação linear simples entre os atributos da planta foi alta e positiva, enquanto, entre os atributos da planta com os do solo, foi baixa e significativa, com interações positivas para macroporosidade e porosidade total, bem como negativa para densidade do solo, na primeira camada. A densidade do solo, na menor profundidade, foi um excelente indicador da qualidade física do solo, para a estimativa da produtividade de matéria seca.

Produtividade da soja e resistência mecânica à penetração do solo sob sistema plantio direto no cerrado brasileiro

A resistência mecânica à penetração do solo pode influenciar, negativamente, o crescimento radicular da soja, afetando, sobremaneira, sua produtividade. No ano agrícola 2008/2009, no município de Selvíria (MS), no Cerrado brasileiro, foi analisada a produtividade da soja, em função da resistência mecânica à penetração de um Latossolo Vermelho distroférrico, no sistema de semeadura direta. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele com a melhor correlação, linear e espacial, para explicar a variabilidade da produtividade da soja. Foi instalada uma malha geoestatística, para a coleta de dados do solo e da planta, com 120 pontos amostrais, em área de 8,34 ha e declive homogêneo de 0,055 m m-1. Dessa forma, visando-se a auxiliar futuros trabalhos voltados à agricultura de precisão, os quais venham a utilizar os mesmos atributos do presente estudo, os valores dos alcances da dependência espacial a serem empregados deverão estar compreendidos entre 38,1 m e 114,7 m. do ponto de vista linear, a resistência mecânica à penetração do solo, quando avaliada na camada 0,10-0,20 m, apresentou boa correlação exponencial inversa com a produtividade de grãos de soja. Entretanto, do ponto de vista espacial, o número de vagens por planta apresentou-se como bom indicador da produtividade de grãos de soja.

Relação das condições socioeconômicas com as condições de saúde bucal em capitais brasileiras

Despite the improvement of Brazilian s living conditions in recent decades, this improvement occurred in a polarized way between groups of better social position. Then, there is still a health inequity´s panorama in Brazil which encompasses the oral health state. This panorama instigated the attainment of this ecological study that aimed to evaluate the relationship of socioeconomic conditions, and public health policies with oral health status in Brazilian capitals. Thus, we performed factor analysis and linear regression using oral health indicators collected from SB Brasil 2010, of socioeconomic conditions from Brazilian Census 2010 and related to water´s supply fluoridation from SISAGUA. Factor analysis with indicators of living conditions revealed two common factors, economic deprivation and socio-sanitary condition. Economic deprivation showed statistically significant positive correlation with DMFT 12 years (p= 0,03) and mean missing teeth (p = 0,002) and negative correlation with caries-free population (p=0,012). Socio-sanitary negatively correlated with DMFT (p <0,0001) and a positive correlation with caries-free population (p = 0.002). Fluoridated water had a significant association with DMFT (p <0,0001), mean missing teeth (p <0,0001) and caries free population (p <0.0001). Multiple linear regression analysis for the DMFT of capital was estimated by socio-sanitary condition and fluoridation, adjusted by economic deprivation, whereas the model for the mean missing teeth was estimated only by fluoridation and economic deprivation, and finally the model the rate for the population free of caries in Brazilian capitals was estimated by economic and socio-sanitary status adjusted fluoridated water supply. Therefore, factors related to living conditions and public policies are intrinsically linked to tooth decay issues. Thus, actions, beyond dental care assistance, must be development to impact positively in social and economic conditions, especially, between the most vulnerable populations

Variabilidade espacial da produtividade do feijoeiro correlacionada com atributos químicos de um Latossolo Vermelho Distroférrico sob sistema de semeadura direta

O feijão, importante fonte proteica, é um alimento muito comum na dieta da população dos países latino-americanos, sendo o Brasil maior produtor mundial deste legume. Nacionalmente, seu cultivo no sistema de semeadura direta tem crescido ano após ano. em 2002, foi avaliada a variabilidade espacial do feijoeiro, em função dos atributos químicos de um Latossolo Vermelho Distroférrico no sistema de semeadura direta, em Selvíria (MS) no Cerrado Brasileiro. O objetivo do presente estudo foi selecionar, entre os atributos do solo pesquisado, aquele com a melhor correlação, linear e espacial, para explicar a variabilidade da produtividade do feijoeiro. Foi instalada uma rede amostral, para a coleta de dados do solo e das plantas, com 135 pontos amostrais, em uma área de 7500 m². A produtividade de grãos de feijão (PG) representou o atributo da planta, enquanto os do solo foram: P, MO, pH, K, Ca, Mg, H+Al, S, T e o V%. Estabeleceram-se correlações lineares, simples e múltiplas, entre a PG e os atributos do solo. Foram modelados semivariogramas para todos os atributos, obtendo-se as respectivas krigagens e validações cruzadas. Também foram estabelecidas as co-krigagens entre a PG e os atributos do solo. em relação à produtividade de grãos de feijão, 22% da sua variação foram atribuídos à variação nos atributos químicos do solo. Tanto linear quanto espacialmente, o pH do solo foi bom indicador da produtividade de grãos de feijão quando cultivado sob sistema de semeadura direta.

Condutividade térmica de rochas: uma aplicação para granitos ornamentais

This dissertation focuses on rock thermal conductivity and its correlations with petrographic, textural, and geochemical aspects, especially in granite rocks. It aims at demonstrating the relations of these variables in an attempt to enlighten the behavior of thermal effect on rocks. Results can be useful for several applications, such as understanding and conferring regional thermal flow results, predicting the behavior of thermal effect on rocks based upon macroscopic evaluation (texture and mineralogy), in the building construction field in order to provide more precise information on data refinement on thermal properties emphasizing a rocky material thermal conductivity, and especially in the dimension stone industry in order to open a discussion on the use of these variables as a new technological parameter directly related to thermal comfort. Thermal conductivity data were obtained by using Anter Corporation s QuicklineTM -30 a thermal property measuring equipment. Measurements were conducted at temperatures ranging between 25 to 38 OC in samples with 2cm in length and an area of at least 6cm of diameter. As to petrography data, results demonstrated good correlations with quartz and mafics. Linear correlation between mineralogy and thermal conductivity revealed a positive relation of a quartz percentage increase in relation to a thermal conductivity increase and its decrease with mafic minerals increase. As to feldspates (K-feldspate and plagioclase) they show dispersion. Quartz relation gets more evident when compared to sample sets with >20% and <20%. Sets with more than 20% quartz (sienogranites, monzogranites, granodiorites, etc.), exhibit to a great extent conductivity values which vary from 2,5 W/mK and the set with less than 20% (sienites, monzonites, gabbros, diorites, etc.) have an average thermal conductivity below 2,5 W/mK. As to textures it has been verified that rocks considered thick/porphyry demonstrated in general better correlations when compared to rocks considered thin/medium. In the case of quartz, thick rocks/porphyry showed greater correlation factors when compared to the thin/medium ones. As to feldspates (K-feldspate and plagioclase) again there was dispersion. As to mafics, both thick/porphyry and thin/medium showed negative correlations with correlation factor smaller than those obtained in relation to the quartz. As to rocks related to the Streckeisen s QAP diagram (1976), they tend to fall from alcali-feldspates granites to tonalites, and from sienites to gabbros, diorites, etc. Thermal conductivity data correlation with geochemistry confirmed to a great extent mineralogy results. It has been seen that correlation is linear if there is any. Such behavior could be seen especially with the SiO2. In this case similar correlation can be observed with the quartz, that is, thermal conductivity increases as SiO2 is incremented. Another aspect observed is that basic to intermediate rocks presented values always below 2,5 W/mK, a similar behavior to that observed in rocks with quartz <20%. Acid rocks presented values above 2,5 W/mK, a similar behavior to that observed in rocks with quartz >20% (granites). For all the other cases, correlation factors are always low and present opposite behavior to Fe2O3, CaO, MgO, and TiO2. As to Al2O3, K2O, and Na2O results are not conclusive and are statistically disperse. Thermal property knowledge especially thermal conductivity and its application in the building construction field appeared to be very satisfactory for it involves both technological and thermal comfort aspects, which favored in all cases fast, cheap, and precise results. The relation between thermal conductivity and linear thermal dilatation have also shown satisfactory results especially when it comes to the quartz role as a common, determining phase between the two variables. Thermal conductivity studies together with rocky material density can function as an additional tool for choosing materials when considering structural calculation aspects and thermal comfort, for in the dimension stone case there is a small density variation in relation to a thermal conductivity considerable variation

Prova de Trabalho de Parto Após uma Cesárea Anterior

Objetivo: estudar a validade da prova de trabalho de parto (PTP) em gestantes com uma cesárea anterior. Métodos: estudo retrospectivo, tipo coorte, incluindo 438 gestantes com uma cesárea anterior ao parto em estudo e seus 450 recém-nascidos (RN), divididas em dois grupos - com e sem PTP. O tamanho amostral mínimo foi de 121 gestantes/grupo. Considerou-se variável independente a PTP e as dependentes relacionaram-se à ocorrência de parto vaginal e à freqüência de complicações maternas e perinatais. Foram efetuadas análises uni e multivariada, respectivamente. A comparação entre as freqüências (%) foi analisada pelo teste do qui-quadrado (chi²) com significância de 5% e regressão logística com cálculo do odds ratio (OR) e do intervalo de confiança a 95% (IC95%). Resultados: a PTP associou-se a 59,2% de partos vaginais. Foi menos indicada nas gestantes com mais de 40 anos (2,7% vs 6,5%) e nas portadoras de doenças associadas e complicações da gravidez: síndromes hipertensivas (7,0%) e hemorragias de 3º trimestre (0,3%). A PTP não se relacionou às complicações maternas e perinatais. As gestantes que tiveram o parto por cesárea, independente da PTP, apresentaram maior risco de complicações puerperais (OR = 3,53; IC95% = 1,57-7,93). A taxa de mortalidade perinatal foi dependente do peso do RN e das malformações fetais e não se relacionou à PTP. Ao contrário, as complicações respiratórias foram mais freqüentes nos RN de mães não testadas quanto à PTP (OR = 1,92; IC95% = 1,20-3,07). Conclusões: os resultados comprovaram que a PTP em gestantes com uma cesárea anterior é estratégia segura - favoreceu o parto vaginal em 59,2% dos casos e não interferiu com a morbimortalidade materna e perinatal. Portanto, é recurso que deve ser estimulado.

Análise de barreiras e o modelo de ressonância funcional de acidentes de Erik Hollnagel

Partindo de apresentação da proposta de análise de acidentes baseada no modelo sistêmico e não linear de acidentes, dito de ressonância funcional, desenvolvido por Erik Hollnagel, este texto discute críticas às concepções deterministas de acidente e aos modelos lineares de representação desses eventos. Aspectos do modelo de ressonância funcional são usados como eixo definidor de proposta de agenda de discussões a ser desenvolvida pelos interessados no tema da análise de acidentes, destacando-se: a) a defesa do abandono da idéia de causas de acidentes e sua substituição pela de explicação desses eventos; b) apresentação dos conceitos de variabilidade de desempenhos e adaptações locais e a proposta de sua utilização como bases para a identificação de perfis ou aspectos típicos de acidentes. Por fim, discute-se a necessidade de incorporação dos conceitos apresentados no debate sobre novos caminhos para as práticas de análises e de prevenção de acidentes em nosso país.