Influence of Er,Cr: YSGG laser on bond strength of self-adhesive resin cement

The purpose of this study was to investigate the bond strength of fiber post previously laser treated root canals. Forty single-rooted bovine teeth were endodontically treated, randomly and equally divided into two main groups according to the type of pretreatment: G1: 2.5% NaOCl (control group); and G2: Er,Cr:YSGG laser. Each group was further subdivided into 2 groups based on the category of adhesive systems/ luting materials used: a: an etch-and-rinse resin cement (Single Bond/RelyX ARC; 3M ESPE), and b: a self-adhesive resin cement (Rely X Unicem; 3M ESPE). Three 1.5 mm thick slabs were obtained per root and the push-out test was performed at a crosshead speed of 0.5 mm/min until post dislodgement occurred. Data were analyzed by ANOVA and post-hoc Tukey's test at a pre-set alpha of 0.05. Analysis of variance showed no statistically significant difference (p > 0.05) among the groups G1a (25.44 ± 2.35) and G1b (23.62 ± 3.48), G2a (11.77 ± 2.67) and G2b (9.93 ± 3.37). Fractures were observed at the interface between the dentin and the resin in all groups. The Er,Cr:YSGG laser irradiation did not influence on the bond strength of the resin cements and the etch-and-rinse resin cement had better results on bond strength than self-adhesive resin cement.

Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R)

Tanomaru-Filho M, Silveira GF, Reis JMSN, Bonetti-Filho I, Guerreiro-Tanomaru JM. Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R). International Endodontic Journal, 44, 1019-1023, 2011.Aim To analyse a method used to evaluate the thermomechanical properties of gutta-percha and Resilon at different temperatures and compression loads.Methodology Two hundred and seventy specimens measuring 10 mm in diameter and 1.5 mm in height were made from the following materials: conventional gutta-percha (GCO). thermoplastic gutta-percha (GTP) and Resilon (R) cones (RE). After 24 h, the specimens were placed in water at 50 degrees C. 60 degrees C or 70 degrees C for 60 s. After that, specimens were placed between two glass slabs, and loads weighing 1.0, 3.0 or 5.0 kg were applied. Images of the specimens were digitized before and after the test and analysed using imaging software to determine their initial and final areas. The thermomechanical property of each material was determined by the difference between the initial and final areas of the specimens. Data were subjected to ANOVA and SNK tests at 5% significance. To verify a possible correlation between the results of the materials, linear regression coefficients (r) were calculated.Results Data showed higher flow area values for RE under all compression loads at 70 degrees C and under the 5.0 kg load at 60 degrees C (P < 0.05). Regarding gutta-percha, GTP showed higher flow under loads weighing 3.0 and 5.0 kg. at 60 and 70 degrees C (P < 0.05). GCO presented higher flow at 70 degrees C with a load of 5.0 kg. Regression analyses showed a poor linear correlation amongst the results of the materials under the different experimental conditions.Conclusion Gutta-percha and Resilon (R) cones require different compression loads and temperatures for evaluation of their thermomechanical properties. For all materials, the greatest flow occurred at 70 degrees C under a load of 5.0 kg: therefore. these parameters may be adopted when evaluating endodontic tilling materials.

Evaluation of the thermoplasticity of gutta-percha and Resilon (R) using the Obtura II System at different temperature settings

Aim To analyse the thermoplasticity of several endodontic filling materials using the Obtura II System at different temperature settings.Methodology The following materials based on gutta-percha: Regular Obtura (OBT), Obtura Flow 150 (OBT F), Endo Flow (EDF), Odous (ODO) and the synthetic thermoplastic polymer material Resilon (RE) were heated using the Obtura II System at three temperature settings (140, 170 and 200 degrees C). Samples of the heated materials were placed on the sensor of a digital thermometer (THR-140; Instrutherm, São Paulo, Brazil) to determine their real temperature (RT) when the system was set at 140 degrees C (from 64.5 to 69 degrees C), 170 degrees C (from 73.8 to 77.5 degrees C) and 200 degrees C (from 83.6 degrees C for EDF and 100 degrees C for RE). Specimens (n = 30) were made by placing samples of each material in metallic ring moulds and compressing them between two glass slabs. After 24 h, specimens (n = 10) were heated at the different settings (RT) and submitted to compression under a 5-kg load. Plasticization was assessed by calculating the differences between the post-compression and initial diameters of each specimen. Data were submitted to ANOVA and Tukey's test at 5% significance.Results At 140 degrees C, Obtura Flow presented the highest thermoplasticity values and Regular Obtura, the lowest. At 170 degrees C, Obtura Flow and Resilon demonstrated greater plasticization. Resilon had the highest mean thermoplasticity values at 200 degrees C.Conclusions Thermoplasticity values were influenced both by the temperature settings on the Obtura II System and by the type of material analysed. Obtura Flow and Resilon had the highest mean thermoplasticity values.

EFFECTS of CREATINE SUPPLEMENTATION DURING RESISTANCE TRAINING on MYOSIN HEAVY CHAIN (MHC) EXPRESSION IN RAT SKELETAL MUSCLE FIBERS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Virulence attenuation and phenotypic variation of Paracoccidioides brasiliensis isolates obtained from armadillos and patients

Paracoccidioides brasiliensis is the etiological agent of paracoccidioidomycosis, the most important systemic mycosis in Latin America. The virulence profiles of five isolates of P. brasiliensis were studied in two different moments and correlated with some colonial phenotypic aspects. We observed a significant decrease in the virulence and an intense phenotypic variation in the mycelial colony. The recognition of all ranges of phenotypic and virulence variation of P. brasiliensis, as well as its physiological and genetic basis, will be important for a better comprehension of its pathogenic and epidemiological features.

Larval stages of Paradasygyius depressus (Bell, 1835) (Crustacea : Decapoda : Brachyura : Majidae) and a phylogenetic analysis for 21 genera of Majidae

All larval stages and the first crab instar of Paradasygyius depressus (Bell) were obtained in laboratory culture. Larval development consists of two zoeal stages, followed by the megalopa. Each larval stage is described in detail. Beginning with the first zoea, the duration of each stage was 4--7 (4.5 +/- 0.7), 4-5 (4.5 +/- 0.5), and 7 days, the megalopa and first crab instar appearing 11 +/- 1 and 15 days after hatching, respectively. A phylogenetic analysis of 21 genera of Majidae is provided based on 34 zoeal and three megalopal characters. The phylogenetic analysis resulted in four equally parsimonious trees 173 steps long (CI = 0.66, RI = 0.71, and RC = 0.47) supporting the monophyly of Oregoniinae, Majinae, and Inachinae (with the exclusion of Macrocheira de Haan incertae sedis). Based on general agreement of sister-group hypotheses, we provide sets of larval characters that define Oregoniinae, Majinae, and Inachinae. Our phylogenetic hypothesis suggests that Oregoniinae is the most basal clade within the Majidae, and Majinae and the clade (Epialtus H. Milne Edwards + Inachinae [excluding Macrocheira incertae sedis]) are sister taxa. Within Inachinae, all trees suggest that Inachus Weber and Macropodia Leach are sister taxa nested as the most derived clade, followed by Achaeus Leach, Pyromaia Stimpson, Paradasygyius Garth, Anasimus A. Milne-Edwards, and the most basal Stenorhynchus Lamarck. The sister-group relationships of the clade (Pisa Leach (Taliepus A. Milne-Edwards + Libinia Leach)), Mithrax Latreille and Microphrys H. Milne Edwards remained unresolved.

Hunting spiders of woodland fragments and agricultural habitats in the Atlantic rain forest region of Brazil

The hunting spider communities of the Dionycha clade were studied 1986 through 1988 in fragmented woodlands and secondary agricultural habitats of the Botucatu area in São Paulo state, Brazil. The original vegetation of mainly tropical Atlantic rain forest (Mata Atlantica) was cleared already 70 years ago. In a total sample of over 1000 adult spiders, 247 species belonging to 12 families Mere determined. A decreasing frequency and diversity of spiders rc as found if forest remnants were compared with sugar cane fields and cattle pasture. The specific composition of the spider fauna as surveyed in different habitats is discussed under ecological aspects and in relation to the history of land use.

Ultramorphology of mandibles from Dolichoderus (=Monacis) bispinosus males.

Mandibles of ants are usual for many activities like cut and transport of food, transport of larvae and eggs, colony defense and to dig the rolls in the soil or/and wood for next building, among other activities. In male the principal function of the mandible is to act itself to female body during the mating by other hand the female use its mandibles to cut out the end of the male body after mating. The mandible movement are be possible because the different muscle presents in its articulation - the abductor and to adductor ones. The S.E.M. makes possible to study it in details to and showed the presence of skeletal muscle. This suggests its function to be instrument to use during the mating.

Energy system contributions in indoor rock climbing

The present study cross-sectionally investigated the influence of training status, route difficulty and upper body aerobic and anaerobic performance of climbers on the energetics of indoor rock climbing. Six elite climbers (EC) and seven recreational climbers ( RC) were submitted to the following laboratory tests: ( a) anthropometry, (b) upper body aerobic power, and ( c) upper body Wingate test. on another occasion, EC subjects climbed an easy, a moderate, and a difficult route, whereas RC subjects climbed only the easy route. The fractions of the aerobic (WAER), anaerobic alactic (W-PCR) and anaerobic lactic (W-[La(])-) systems were calculated based on oxygen uptake, the fast component of excess post-exercise oxygen uptake, and changes in net blood lactate, respectively. on the easy route, the metabolic cost was significantly lower in EC [ 40.3 ( 6.5) kJ] than in RC [60.1 ( 8.8) kJ] ( P < 0.05). The respective contributions of the WAER, WPCR, and W-[La(])- systems in EC were: easy route = 41.5 (8.1), 41.1 (11.4) and 17.4% (5.4), moderate route = 45.8 (8.4), 34.6 (7.1) and 21.9% (6.3), and difficult route = 41.9 (7.4), 35.8 (6.7) and 22.3% (7.2). The contributions of the WAER, WPCR, and W-[La(])- systems in RC subjects climbing an easy route were 39.7 (5.0), 34.0 (5.8), and 26.3% (3.8), respectively. These results indicate that the main energy systems required during indoor rock climbing are the aerobic and anaerobic alactic systems. In addition, climbing economy seems to be more important for the performance of these athletes than improved energy metabolism.

A capoeira como escola de ofício

The purpose of this paper is to provide an in-depth look at the origins of the capoeira, as well as the occupation school, aiming to structure a work in the historic-bibliographic perspective which allows elucidating this relation with the occupation school, since this beging its origins until nowadays. It is a descriptive study, using the source documentary collection of data. Among the results it was observed that the capoeira it was not considered a ocupation (it was rather forbidden) but a "subsistence system", being transmitted from one generation to the other orally. The paths that the capoeira has walked through and, under certain circumstance, has draw for itself, make it a occupation school, such as in the relationship master-apprentice which lasts until the present moment. We are able to conclude that the capoeira as corporation and occupation school are realities lived due to its structure and function, both present in the contemporary world.

Historical aspects of Belly Dance and its practice in Brazil

Dance is regarded as one of the oldest art forms, which is based on evidence from prehistoric paintings found in caves; man expressed himself through body language prior to the development of spoken and written forms of communication. Dance was then used during important events, common to their era and culture, and often in religious rituals, to ensure good harvests - their economic activity. Belly-dance appeared approximately eight thousand years B. C. E. as a sacred dance firstly practiced by priestesses, and after that, it was popularized amongst women from Mesopotamia. Virtually considered an ancient form of physical exercise, it is still practiced by Bedouin women as a preparation for spontaneous delivery. In Brazil, belly-dance is widely practiced and our corporal culture enables its learning and improvement, resulting in professional dancers.

Respostas fisiológicas durante o exercício contínuo e intermitente: implicações para a avaliação e a prescrição do treinamento aeróbio

The objective of this study was to review the acute responses to maximal and supramaximal intermittent exercise (intensities near or above maximal oxygen uptake - iVO(2)max), and also at submaximal intermittent exercise, with intensities near maximal lactate steady state (MLSS). At the conditions of interval training above 100% iVO(2)max with short repetitions (<60 s), the passive recovery between the repetitions allows higher intensity during sets. For longer repetitions, the active recovery can be more efficient, since promotes greater blood lactate removal and longer time near VO(2)max. At the conditions of submaximal interval training, the relationship between intensity and duration of the repetitions are still maintained, i.e., the longer durations (>300 s) allow lower intensities and the shorter (150-300 s) allow higher intensities, with similar metabolic conditions (i.e., MLSS). However, both recovery types can be utilized, since they proportionate similar intensities at these conditions.

Efeito da velocidade de corrida em variáveis eletromiográficas e metabólicas

The aim of this study was to analyze the electromyographic signal of the rectus femuris (RF), vastus lateralis (VL), biceps femuris (BF), tibialis anterior (TA), and gastrocnemius lateralis (GL) muscles of seven male volunteers, during different running velocities; and determine and compare the EMG(FT) (electromyographic fatigue threshold), LT (lactate threshold) and AT (anaerobic threshold). The running protocol started with a velocity of 10 km.h(-1) and each three minutes elapsed occurred an increments of 1 km.h(-1) until the exhaustion, with an 30 second interval between each velocity increment to collect 25 mu l of blood. The increase of RMS values was verified in the RF in the velocities of 12 km.h(-1) to 14 km.h(-1). The EMG(FT) showed similarity between the muscles and in the indexes were found the following significant differences: AT > LT; EMG(FT) RF and EMG(FT) VL < AT and EMG(FT) VL and EMG(FT) BF > LT. These data confirmed the viability of using the EMGFT as a possible indicator to analyze the muscle fatigue.

O atletismo nos cursos de graduação em Educação Física

This study has the purpose to investigate the characteristics and the role of the athletics-related sports disciplines in four Physical Education undergraduate courses. In order to reach the goal, it was conducted as a qualitative-type research. Data was collected through documental analysis on disciplines briefings and programs, and also from classes observations and interviews with professors and students from the institutions (two State-boarded and two private) responsible for the courses. Through these analyses it was perceived that those disciplines have surpassed some characteristics of the traditional undergraduate program, which is based on sports. Regarding the role of the disciplines, it was noted that professors consider them as responsible for providing students with basic conditions, so they could benefit from sports as instrumental subjects for their professional intervention.

Aderência a um programa de atividade física e fatores associados

The aim of this study was to verify the adherence of participants in a program of physical activity; and to verify if there is any association between the age, Body Mass Index and General Functional Fitness Index with this adherence. It was used the control of frequency for 62 months and data of the anthropometric and functional evaluations of 122 participants (58 + 9 years). 49.2% of the participants gave the program up and 50.8% remained to it. The average of permanence time was 24 + 17 months. The percentage of the adherence of people with satisfactory fitness is greater than with not satisfactory fitness. The percentage of adherence of older people is larger than younger age. The percentage of adherence of not-obese is greater than of obese. However, none of these variables presented statistical difference. It can be concluded that even though there was adherence with similar results even to permanence as to desistance, the time of permanence in the program was very high when compared to other studies.