Morphostructural analysis of an alpine debris flows catchment: implication for debris supply

Rock slope instabilities are implicitly linked to the supply of sediment and debris recharging channels prone to debris flow. Hence, the incorporation of bedrock structure and terrain morphology can be relevant in the analysis of sediment budget and debris flow hazard assessment. Here, the mode of debris production of the Manival catchment (northern French Alps) is documented by the study of its morphostructural aspects extracted from high resolution DEM. Terrain implication in the process of debris supply is evaluated by: a) A systematic classification of the major morphological units based on the slope gradient that enables a spatial analysis of zones of debris production and deposition. b) A detailed structural analysis performed on DEM in order to identify potential unstable slopes. c) An analysis of the gullies orientation that informs in term of structural control of the sources zones. d) Localisation of high density joints sets that document about whether sources of continuous debris production are controlled by the structural setting of the catchment. These DEM-based indicators can be used as proxies for assessing the influences of the current topography and enable to quantify a degree of susceptibility to mass wasting and hillslope erosion activity. This present contribution suggests some directions for characterizing sediment flux dynamic in small alpine catchment.

Pineus boerneri Annand, 1928 (Hemiptera, Adelgidae) - a new species to Brazil: morphology of eggs, nymphs and adults

Pineus boerneri Annand, 1928 (Hemiptera, Adelgidae) _ a new species to Brazil: morphology of eggs, nymphs and adults. Pineus boerneri represents the first Adelgidae species recorded in Brazil. This aphid species forms extensive colonies on branches and trunk of Pinus spp., with apterous oviparous females, eggs and nymphs covered with white wax. The aim of this research is to study the morphology of eggs, nymphs, and adults to provide useful data for species identification in order to solve taxonomic issues. The study was based on morphometric data and optical and scanning electron microscopy images. First instar nymphs are active and can be easily distinguished from the others by their elongate minute yellowish body; well developed legs bearing a pair of sensorial setae at the apex of the second tarsomere; and antenna with three segments with a large rhinarium and distinct apical setae on the last segment. From the second to the fourth instar, nymphs are sessile, with round red body; they loose the third antennal segment and its sensorial structures, as well as the setae on the second tarsomere. The oviparous female is reddish-brown, with round body with about 0.76 mm diameter; legs reduced; antennae one-segmented; ovipositor distinct; numerous wax glands are present, mainly on the head. Accurate characterization of the species and distinction of the nymphal instars of P. boerneri were made possible by canonical analysis of morphometric data and morphological characters.

Finite-size scaling analysis of the avalanches in the three-dimensional Gaussian random-field Ising model with metastable dynamics

A numerical study is presented of the third-dimensional Gaussian random-field Ising model at T=0 driven by an external field. Standard synchronous relaxation dynamics is employed to obtain the magnetization versus field hysteresis loops. The focus is on the analysis of the number and size distribution of the magnetization avalanches. They are classified as being nonspanning, one-dimensional-spanning, two-dimensional-spanning, or three-dimensional-spanning depending on whether or not they span the whole lattice in different space directions. Moreover, finite-size scaling analysis enables identification of two different types of nonspanning avalanches (critical and noncritical) and two different types of three-dimensional-spanning avalanches (critical and subcritical), whose numbers increase with L as a power law with different exponents. We conclude by giving a scenario for avalanche behavior in the thermodynamic limit.

Urological complications in renal transplantation from cadaveric donor grafts: a retrospective analysis of 20 years.

INTRODUCTION: This study is a retrospective analysis of ureteral complications and their management from a monocenter series of 277 consecutive renal transplantations. MATERIALS AND METHODS: From September 1979 to June 1999, 277 renal transplantations (cadaveric origin) were performed in 241 patients. The ureter from the kidney graft was inserted into the bladder according to the technique of extravesical implantation described by Lich-Gregoir and Campos-Freire. The study analyzed the time of occurrence and the type of complications observed. The different procedures to restore the transplanted urinary tract are presented. RESULTS: Complications occurred in 43/277 renal transplantations (15.5%). Anastomotic urine leakage or ureteral stricture were the most frequent. The time to appearance of these complications was either short (<1 month) or late (>1 month) in a similar number of cases. Most cases were managed surgically: 33/43 cases (76.7%). The most frequent surgical repair was ureterovesical reimplantation (n=13), followed by: ureteroureteral end-to-end anastomosis (native ureter-ureter transplant, n=5); pyeloureteral anastomosis (native ureter-renal pelvis transplant, n=5); simple revision of ureterovesical implantation (n=4); resection and end-to-end anastomosis of the transplant ureter (n=2); calico-vesicostomy (graft-bladder, n=1); implantation according to Boari (n=1); pyelovesicostomy with bipartition of bladder (n=1), and pyeloileocystoplasty with detubularized ileal graft (n=1). No deaths related to any of the urological complications were reported. However, 2 consecutive vesico-renal refluxes led to the loss of the kidney graft in the long-term. CONCLUSION: The rate of complications observed in this retrospective analysis is similar to the experience of other studies, ranging from 2 to 20%. If the classical extravesical ureteral bladder implantation is to remain an attractive technique due to its simplicity, the surgical team at the training center should be aware of all the means to prevent any ureteral complications, such as the choice of another implantation technique and/or insertion of a transient ureteral stent.

cGMP-dependent protein kinase type I is implicated in the regulation of the timing and quality of sleep and wakefulness.

Many effects of nitric oxide (NO) are mediated by the activation of guanylyl cyclases and subsequent production of the second messenger cyclic guanosine-3',5'-monophosphate (cGMP). cGMP activates cGMP-dependent protein kinases (PRKGs), which can therefore be considered downstream effectors of NO signaling. Since NO is thought to be involved in the regulation of both sleep and circadian rhythms, we analyzed these two processes in mice deficient for cGMP-dependent protein kinase type I (PRKG1) in the brain. Prkg1 mutant mice showed a strikingly altered distribution of sleep and wakefulness over the 24 hours of a day as well as reductions in rapid-eye-movement sleep (REMS) duration and in non-REM sleep (NREMS) consolidation, and their ability to sustain waking episodes was compromised. Furthermore, they displayed a drastic decrease in electroencephalogram (EEG) power in the delta frequency range (1-4 Hz) under baseline conditions, which could be normalized after sleep deprivation. In line with the re-distribution of sleep and wakefulness, the analysis of wheel-running and drinking activity revealed more rest bouts during the activity phase and a higher percentage of daytime activity in mutant animals. No changes were observed in internal period length and phase-shifting properties of the circadian clock while chi-squared periodogram amplitude was significantly reduced, hinting at a less robust oscillator. These results indicate that PRKG1 might be involved in the stabilization and output strength of the circadian oscillator in mice. Moreover, PRKG1 deficiency results in an aberrant pattern, and consequently a reduced quality, of sleep and wakefulness, possibly due to a decreased wake-promoting output of the circadian system impinging upon sleep.

In situ spectroellipsometric study of the nucleation and growth of amorphous silicon

A detailed in situ spectroellipsometric analysis of the nucleation and growth of hydrogenated amorphous silicon (a:Si:H) is presented. Photoelectronic quality a‐Si:H films are deposited by plasma‐enhanced chemical vapor deposition on smooth metal (NiCr alloy) and crystalline silicon (c‐Si) substrates. The deposition of a‐Si:H is analyzed from the first monolayer up to a final thickness of 1.2 μm. In order to perform an improved analysis, real time ellipsometric trajectories are recorded, using fixed preparation conditions, at various photon energies ranging from 2.2 to 3.6 eV. The advantage of using such a spectroscopic experimental procedure is underlined. New insights into the nucleation and growth mechanisms of a‐Si:H are obtained. The nucleation mechanism on metal and c‐Si substrates is very accurately described assuming a columnar microstructural development during the early stage of the growth. Then, as a consequence of the incomplete coalescence of the initial nuclei, a surface roughness at the 10-15 Å scale is identified during the further growth of a‐Si:H on both substrates. The bulk a‐Si:H grows homogeneously beneath the surface roughness. Finally, an increase of the surface roughness is evidenced during the long term growth of a‐Si:H. However, the nature of the substrate influenced the film growth. In particular, the film thickness involved in the nucleation‐coalescence phase is found lower in the case of c‐Si (67±8 Å) as compared to NiCr (118±22 Å). Likewise films deposited on c‐Si present a smaller surface roughness even if thick samples are considered (>1 μm). More generally, the present study illustrates the capability of in situ spectroellipsometry to precisely analyze fundamental processes in thin‐film growth, but also to monitor the preparation of complex structures on a few monolayers scale.

Endosseous dental implant fractures an analysis of 21 cases

Implant fracture is an infrequent cause of implant failure. The present study evaluates 21 fractured implants, with an analysis of patient age and sex, the type, length and diameter of the implant, positioning in the dental arch, the type of prosthetic rehabilitation involved, the number of abutments and pontics, the presence or absence of distal extensions or cantilevers, and loading time to fracture. Implant fracture was more common in males than in females (15:4), and the mean patient age was 56.9 years. Most cases (n = 19) corresponded to implant-supported fixed prostheses - 16 with cantilevers of different lengths- while only two fractured implants were supporting overdentures instead of fixed prostheses. The great majority of fractured implants (80.9%) were located in the molar and premolar regions, and most fractured within 3-4 years after loading. It is important to know and apply the measures required to prevent implant fracture, and to seek the best individualized solution for each case - though complete implant removal is usually the treatment of choice

Analysis of the mitochondrial DNA of Schizophrenia patients by next generation sequencing

Mitochondrial DNA (mtDNA), a maternally inherited 16.6-Kb molecule crucial for energy production, is implicated in numerous human traits and disorders. It has been hypothesized that the presence of mutations in the mtDNA may contribute to the complex genetic basis of schizophreniadisease, due to the evidence of maternal inheritance and the presence of schizophrenia symptoms in patients affected of a mitochondrial disorder related to a mtDNA mutation. The present project aims to study the association of variants of mitochondrial DNA (mtDNA), and an increased risk of schizophrenia in a cohort of patients and controls from the same population. The entire mtDNA of 55 schizophrenia patients with an apparent maternal transmission of the disease and 38 controls was sequenced by Next Generation Sequencing (Ion Torrent PGM, Life Technologies) and compared to the reference sequence. The current method for establishing mtDNA haplotypes is Sanger sequencing, which is laborious, timeconsuming, and expensive. With the emergence of Next Generation Sequencing technologies, this sequencing process can be much more quickly and cost-efficiently. We have identified 14 variants that have not been previously reported. Two of them were missense variants: MTATP6 p.V113M and MTND5 p.F334L ,and also three variants encoding rRNA and one variant encoding tRNA. Not significant differences have been found in the number of variants between the two groups. We found that the sequence alignment algorithm employed to align NGS reads played a significant role in the analysis of the data and the resulting mtDNA haplotypes. Further development of the bioinformatics analysis and annotation step would be desirable to facilitate the application of NGS in mtDNA analysis.

Animals in an Urban Context. A Zooarchaeological study of the Medieval and Post-Medieval town of Turku

The aim of this study is to explore the role and importance of different animal species in Turku through an analysis of osteological data and documentary evidence. The osteological material used in this study is derived from two town plots in Turku dating from the 13th century to the 19th century. The osteological material deposited in Turku represents animals bred both in the town and in the surrounding landscape. Animal husbandry in SW-Finland can also be examined through a number of historical documents. The importance of animals in Turku and its hinterland are closely connected and therefore the roles of the animals in both urban and rural settings are examined. The study has revealed the complexity of the depositional patterns in medieval and post-medieval Turku. In the different areas of Turku, characteristic patterns in the osteological material and different deposit types were evident. These patterns are reflections of the activities and therefore of the lifestyles practiced in Turku. The results emphasise the importance of context- awareness in the study of material culture from archaeological sites. Both the zooarchaeological and historical sources indicate that cattle were important in animal husbandry in Turku from the Middle Ages up to the 19th century. Sheep were the second most common species. When taking into consideration the larger size of cattle, the dominance of these animals when it come to meat consumption seems clear even in those phases where sheep bones are more abundant. Pig is less abundant in the material than either cattle or sheep and their importance for subsistence was probably fairly modest, albeit constant. Goats were not abundant in the material. Most of the identified goat bones came from low utility body parts (e.g. skulls and lower extremities), but some amount of goat meat was also consumed. Wild species were of minor importance when it came to consumption practices in Turku. The changes in Turku’s animal husbandry patterns between the medieval and post medieval periods is reflected in the change in age of the animals slaughtered, which was part of a wider pattern seen in North- and Central Europe. More mature animals are also present in the assemblages. This pattern is related to the more pronounced importance of cattle as a manure producer and a draught animal as a result of the intensification of crop cultivation. This change seems to occur later in Finland than in the more Southerly regions, and indeed it did not necessarily take hold in all parts of the country.

Decoupled evolution of floral traits and climatic preferences in a clade of Neotropical Gesneriaceae.

BACKGROUND: Major factors influencing the phenotypic diversity of a lineage can be recognized by characterizing the extent and mode of trait evolution between related species. Here, we compared the evolutionary dynamics of traits associated with floral morphology and climatic preferences in a clade composed of the genera Codonanthopsis, Codonanthe and Nematanthus (Gesneriaceae). To test the mode and specific components that lead to phenotypic diversity in this group, we performed a Bayesian phylogenetic analysis of combined nuclear and plastid DNA sequences and modeled the evolution of quantitative traits related to flower shape and size and to climatic preferences. We propose an alternative approach to display graphically the complex dynamics of trait evolution along a phylogenetic tree using a wide range of evolutionary scenarios. RESULTS: Our results demonstrated heterogeneous trait evolution. Floral shapes displaced into separate regimes selected by the different pollinator types (hummingbirds versus insects), while floral size underwent a clade-specific evolution. Rates of evolution were higher for the clade that is hummingbird pollinated and experienced flower resupination, compared with species pollinated by bees, suggesting a relevant role of plant-pollinator interactions in lowland rainforest. The evolution of temperature preferences is best explained by a model with distinct selective regimes between the Brazilian Atlantic Forest and the other biomes, whereas differentiation along the precipitation axis was characterized by higher rates, compared with temperature, and no regime or clade-specific patterns. CONCLUSIONS: Our study shows different selective regimes and clade-specific patterns in the evolution of morphological and climatic components during the diversification of Neotropical species. Our new graphical visualization tool allows the representation of trait trajectories under parameter-rich models, thus contributing to a better understanding of complex evolutionary dynamics.

On the Application of Beam on Elastic Foundation Theory to the Analysis of Stiffened Plate Strips

The main objective of this thesis is to show that plate strips subjected to transverse line loads can be analysed by using the beam on elastic foundation (BEF) approach. It is shown that the elastic behaviour of both the centre line section of a semi infinite plate supported along two edges, and the free edge of a cantilever plate strip can be accurately predicted by calculations based on the two parameter BEF theory. The transverse bending stiffness of the plate strip forms the foundation. The foundation modulus is shown, mathematically and physically, to be the zero order term of the fourth order differential equation governing the behaviour of BEF, whereas the torsion rigidity of the plate acts like pre tension in the second order term. Direct equivalence is obtained for harmonic line loading by comparing the differential equations of Levy's method (a simply supported plate) with the BEF method. By equating the second and zero order terms of the semi infinite BEF model for each harmonic component, two parameters are obtained for a simply supported plate of width B: the characteristic length, 1/ λ, and the normalized sum, n, being the effect of axial loading and stiffening resulting from the torsion stiffness, nlin. This procedure gives the following result for the first mode when a uniaxial stress field was assumed (ν = 0): 1/λ = √2B/π and nlin = 1. For constant line loading, which is the superimposition of harmonic components, slightly differing foundation parameters are obtained when the maximum deflection and bending moment values of the theoretical plate, with v = 0, and BEF analysis solutions are equated: 1 /λ= 1.47B/π and nlin. = 0.59 for a simply supported plate; and 1/λ = 0.99B/π and nlin = 0.25 for a fixed plate. The BEF parameters of the plate strip with a free edge are determined based solely on finite element analysis (FEA) results: 1/λ = 1.29B/π and nlin. = 0.65, where B is the double width of the cantilever plate strip. The stress biaxial, v > 0, is shown not to affect the values of the BEF parameters significantly the result of the geometric nonlinearity caused by in plane, axial and biaxial loading is studied theoretically by comparing the differential equations of Levy's method with the BEF approach. The BEF model is generalised to take into account the elastic rotation stiffness of the longitudinal edges. Finally, formulae are presented that take into account the effect of Poisson's ratio, and geometric non linearity, on bending behaviour resulting from axial and transverse inplane loading. It is also shown that the BEF parameters of the semi infinite model are valid for linear elastic analysis of a plate strip of finite length. The BEF model was verified by applying it to the analysis of bending stresses caused by misalignments in a laboratory test panel. In summary, it can be concluded that the advantages of the BEF theory are that it is a simple tool, and that it is accurate enough for specific stress analysis of semi infinite and finite plate bending problems.

Germination and Dormancy in Seeds of Sorghum halepense and Sorghum arundinaceum

Light, temperature and dormancy are factors that influence the germination of seeds and are strictly linked to the emergence of weeds. The objective of this work was to assess the germination of Sorghum arundinaceum and Sorghum halepense subjected to different conditions of temperature and luminosity, as well as assessing seed dormancy breaking mechanisms. For this, two experiments were conducted, both arranged in a completely randomized design. Experiment 1 was installed in a 2 x 5 double factorial design. The first factor was the absence or presence of light for 12 hours, and the other was composed of five constant temperatures: 15, 20, 30, 40 and 45 oC. In experiment 2, the efficiency of nine treatments used for breaking dormancy of seeds was assessed. The variables analyzed for both experiments were germination percentage and germination speed index (GSI). For the statistical analysis were performed an analysis of variance (ANOVA) and all the necessary consequences, as well as regression, when relevant. In experiment 1 for both species greater germination occurred in the presence of light. For S. arundinaceum the temperatures at which there was the highest percentage of germination were 33.13 and 31.24 oC for presence and absence of light respectively. As for S. halepense these temperatures were 31.98 and 29.75 oC for presence and absence of light respectively. As for the treatments for breaking dormancy, the mechanical scarification of seeds with sandpaper presented the highest germination and GSI. It is concluded that the Sorghum species studied are neutral photoblastic seeds and present mechanical type dormancy.

Alterations in The States and Contents of Consciousness: Empirical and Theoretical Aspects

The main purpose of the present doctoral thesis is to investigate subjective experiences and cognitive processes in four different types of altered states of consciousness: naturally occurring dreaming, cognitively induced hypnosis, pharmacologically induced sedation, and pathological psychosis. Both empirical and theoretical research is carried out, resulting in four empirical and four theoretical studies. The thesis begins with a review of the main concepts used in consciousness research, the most influential philosophical and neurobiological theories of subjective experience, the classification of altered states of consciousness, and the main empirical methods used to study consciousness alterations. Next, findings of the original studies are discussed, as follows. Phenomenal consciousness is found to be dissociable from responsiveness, as subjective experiences do occur in unresponsive states, including anaesthetic-induced sedation and natural sleep, as demonstrated by post-awakening subjective reports. Two new tools for the content analysis of subjective experiences and dreams are presented, focusing on the diversity, complexity and dynamics of phenomenal consciousness. In addition, a new experimental paradigm of serial awakenings from non-rapid eye movement sleep is introduced, which enables more rapid sampling of dream reports than has been available in previous studies. It is also suggested that lucid dreaming can be studied using transcranial brain stimulation techniques and systematic analysis of pre-lucid dreaming. For blind judges, dreams of psychotic patients appear to be indistinguishable from waking mentation reports collected from the same patients, which indicates a close resemblance of these states of mind. However, despite phenomenological similarities, dreaming should not be treated as a uniform research model of psychotic or intact consciousness. Contrary to this, there seems to be a multiplicity of routes of how different states of consciousness can be associated. For instance, seemingly identical time perception distortions in different alterations of consciousness may have diverse underlying causes for these distortions. It is also shown that altered states do not necessarily exhibit impaired cognitive processing compared to a baseline waking state of consciousness: a case study of time perception in a hypnotic virtuoso indicates a more consistent perceptual timing under hypnosis than in a waking state. The thesis ends with a brief discussion of the most promising new perspectives for the study of alterations of consciousness.

Genomic analysis of Brazilian patients with Fabry disease

Fabry disease is an X-linked lysosomal disorder due to a-galactosidase A deficiency that causes storage of globotriaosylceramide. The gene coding for this lysosomal enzyme is located on the long arm of the X chromosome, in region Xq21.33-Xq22. Disease progression leads to vascular disease secondary to involvement of kidney, heart and the central nervous system. Detection of female carriers based solely on enzyme assays is often inconclusive. Therefore, mutation analysis is a valuable tool for diagnosis and genetic counseling. Many mutations of the a-galactosidase A gene have been reported with high genetic heterogeneity, being most mutations private found in only one family. The disease is panethnic, and estimates of incidence range from about 1 in 40,000 to 60,000 males. Our objective was to describe the analysis of 6 male and 7 female individuals belonging to 4 different Fabry disease families by automated sequencing of the seven exons of the a-galactosidase gene. Sequencing was performed using PCR fragments for each exon amplified from DNA extracted from peripheral blood. Three known mutations and one previously described in another Brazilian family were detected. Of 7 female relatives studied, 4 were carriers. Although the present study confirms the heterogeneity of mutations in Fabry disease, the finding of the same mutation previously detected in another Fabry family from our region raises the possibility of some founder effect, or genetic drift. Finally, the present study highlights the importance of molecular analysis for carrier detection and genetic counseling.

Analysis of testicular cell populations using flow cytometry

Studying testis is complex, because the tissue has a very heterogeneous cell composition and its structure changes dynamically during development. In reproductive field, the cell composition is traditionally studied by morphometric methods such as immunohistochemistry and immunofluorescence. These techniques provide accurate quantitative information about cell composition, cell-cell association and localization of the cells of interest. However, the sample preparation, processing, staining and data analysis are laborious and may take several working days. Flow cytometry protocols coupled with DNA stains have played an important role in providing quantitative information of testicular cells populations ex vivo and in vitro studies. Nevertheless, the addition of specific cells markers such as intracellular antibodies would allow the more specific identification of cells of crucial interest during spermatogenesis. For this study, adult rat Sprague-Dawley rats were used for optimization of the flow cytometry protocol. Specific steps within the protocol were optimized to obtain a singlecell suspension representative of the cell composition of the starting material. Fixation and permeabilization procedure were optimized to be compatible with DNA stains and fluorescent intracellular antibodies. Optimization was achieved by quantitative analysis of specific parameters such as recovery of meiotic cells, amount of debris and comparison of the proportions of the various cell populations with already published data. As a result, a new and fast flow cytometry method coupled with DNA stain and intracellular antigen detection was developed. This new technique is suitable for analysis of population behavior and specific cells during postnatal testis development and spermatogenesis in rodents. This rapid protocol recapitulated the known vimentin and γH2AX protein expression patterns during rodent testis ontogenesis. Moreover, the assay was applicable for phenotype characterization of SCRbKO and E2F1KO mouse models.