Evaluation on the effectiveness of actions for controlling infestation by rodents in Campo Limpo region, Sao Paulo Municipality, Brazil

Rodents are responsible for the transmission of more than 60 diseases both to human beings and to domestic animals. The increase in rodent infestation in a given area brings several health problems to the nearby population. Thus, when infestation increases, it is time to take intervention measures. Although many countries have implemented programs aimed at controlling rodent infestation, literature on studies evaluating the effectiveness of intervention measures in urban areas is scarce. Aimed at contributing to the understanding of rodents` population dynamics in urban areas, the objective of this study was to evaluate the effectiveness of the control methods proposed by ""Programa de Vigilancia e Controle de Roedores do Municipio de Sao Paulo`` (Program for Rodents Surveillance and Control in Sao Paulo Municipality), conducted on Jardim Comercial District. As a first step, a survey to assess infestation rates was conducted in 1529 dwellings located in the area studied. After that, a chemical control upon rodents was accomplished in every dwelling infested. One week and six months after completion of control measures, a new evaluation on infestation rates was carried out, in order to verify the effectiveness of the procedures taken and to estimate the re-infestation capacity. Initial infestation rate was 40.0%, and the final infestation rate, 14.4%. Therefore, the effectiveness of the control methods utilized was 63.8%. It can thus be concluded that the control methods applied were quite effective.

Design/Evaluation of A Methodology For Performance Optimization Of Indexable Carbide Inserts

In this project, two broad facets in the design of a methodology for performance optimization of indexable carbide inserts were examined. They were physical destructive testing and software simulation.For the physical testing, statistical research techniques were used for the design of the methodology. A five step method which began with Problem definition, through System identification, Statistical model formation, Data collection and Statistical analyses and results was indepthly elaborated upon. Set-up and execution of an experiment with a compression machine together with roadblocks and possible solution to curb road blocks to quality data collection were examined. 2k factorial design was illustrated and recommended for process improvement. Instances of first-order and second-order response surface analyses were encountered. In the case of curvature, test for curvature significance with center point analysis was recommended. Process optimization with method of steepest ascent and central composite design or process robustness studies of response surface analyses were also recommended.For the simulation test, AdvantEdge program was identified as the most used software for tool development. Challenges to the efficient application of this software were identified and possible solutions proposed. In conclusion, software simulation and physical testing were recommended to meet the objective of the project.

An assessment of criteria to evaluate the graduate education program in Brazil

This study sought to identify criteria adequate for the evaluation of graduate programs in Brazil. A survey was the means for collecting the ratings and rankings given by faculty members at selected Brazilian graduate programs. A questionnaire using Likerttype and ranking items asked the importance attributed by each respondent to each of the 109 items listed. The data analysis reported in this dissertation indicates that the most highly rated criteria and indicators were: (1) Library: current periodicals; (2) Facilities: classrooms and laboratories; (3) Library: books and monographs; (4) Academic Environment: discussion, investigation, and expression; and (5) Facilities: research space and equipment. The study presents the means and standard deviations obtained for each indicator and also includes some figures obtained for a relational analysis. This dissertation was developed to provide useful information to educational planners, policy makers, administrators, and evaluators involved in Brazilian higher education or comparative studies. It is suggested that additional investigations concentrate on more specific and in-depth analysis and interpretation of the policymaking processes, i.e., on the study of social facts or organizational and academic variables in their relationships with aspects of the educational system. The appendices section includes a facsimile of the questionnaire and additional data.

Models for genetic evaluation of Nelore cattle mature body weight

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Performance evaluation on electronic control systemsfor field sprayers using programmable logic controllers

The aim of this study was to develop a laboratory method for time response evaluation on electronically controlled spray equipment using Programmable Logic Controllers (PLCs). For that purpose, a PLC controlled digital drive inverter was set up to drive an asynchronous electric motor linked to a centrifugal pump on a experimental sprayer equipped with electronic flow control. The PLC was operated via RS232 serial communication from a PC computer. A user program was written to control de motor by adjusting the following system variables, all related to the motor speed: time stopped; ramp up and ramp down times, time running at a given constant speed and ramp down time to stop the motor. This set up was used in conjunction with a data acquisition system to perform laboratory tests with an electronically controlled sprayer. Time response for pressure stabilization was measured while changing the pump speed by +/-20%. The results showed that for a 0.2 s ramp time increasing the motor speed, as an example, an AgLogix Flow Control system (Midwest Technologies Inc.) took 22 s in average to readjust the pressure. When decreasing the motor speed, this time response was down to 8 s. General results also showed that this kind of methodology could make easier the definition of standards for tests on electronically controlled application equipment.

Application of wavelets to the evaluation of phantom images for mammography quality control

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of muscle tissue growth in Young Mediterranean Buffaloes slaughtered at different weights

This study evaluated muscle, adipose and bone tissue growth in young Mediterranean buffaloes slaughtered with different weights. Twenty eight non-castrated males, approximately 14 months old and 330 kilos, were distributed in four experimental and one control groups. Received the same diet during a non-fixed period and when reached the pre-established weights (450 kg, 480 kg, 510 kg, 540 kg) were fasted for 16 hours and slaughtered. NRC 1996, level 2, ruminal simulation program for non-castrated animals with a daily weight gain of 1.40 kg determined percentage composition of experimental diet (dry matter): coast cross hay (20.6%), corn silage (7.8%), cotton seed (8.2%), humid corn silage (46%) and commercial mineral concentrate (17.4%), representing 13% of crude protein and 2,68% of metabolizable energy (Mcal/kg). Feed was offered ad libitum twice daily. Slaughter of control group occurred after 30 days of an adaptation period. The other ones were weighted each 28 days until reached pre-established weight. Carcasses were chilled for 18 hours under -5 degrees C. Ninth, 10 degrees and 11 degrees ribs of the half left carcass were submitted to HH section and according to the statistical regression analysis (SAS, 1996), allometric coefficient value was negative (b<1) demonstrating the early growth of muscle in relation to empty carcass weight.

Microbiological evaluation of milk samples positive to California Mastitis Test in dairy buffalo cows (Buballus bubalis)

In order to observe the microbiological status of CMT positive samples, 734 apparently health mammary quarters from buffalo cows were submitted to physical evaluation, strip cup test and CMT. After milk samples inoculation in 10% ovine blood agar base media and in MacConkey agar and incubation under aerobic condition for 72 hours at 37 degrees C, identification was proceeded. According to CMT, 227 quarters (30,93%) were positive, among them 73 (32,16%) presented 1+ reaction, 53 (23,35%) were 2+ and 101 (44,49%) were 3+. Microbiological exams of such samples were positive in 147 (64,76%) out of 227 CMT positive samples and among the remaining 72 (31,72%) were negative and 8 (3,52) were contaminated. In the 147 microbiological positive samples 204 bacteria were found in pure or associated growth and the most frequent agents were: Corynebacterium sp (59,25%); Staphylococcus sp (17,65%) among which 86,11% were coagulase negative and 13,89% were coagulase positive; and Micrococcus sp (6,37%). The results revealed that, excluding the eight contaminated samples, 147 (67,12%) quarters out of 219 CMT positive could be considered as bacteria-carrier and that even in a smaller percentage false-positive results can cause problems in a sanitary program for mastitis control in dairy buffalo cows.

Evaluation of sixth grade primary schoolchildren's knowledge about avulsion and dental reimplantation

Dental trauma, particularly tooth avulsion, is a frequent cause of tooth loss in children, adolescents, and young adults. The avulsed tooth should be immediately reimplanted in its alveolus. This procedure can be performed by anyone at the accident site and not only by dental surgeons. Therefore, the purpose of this study is to evaluate the knowledge of sixth graders of the city of Aracatuba, SP, about dental avulsion and tooth reimplantation through a structured and standardized survey. Our sample consisted of 778 students. The data collected was processed using the program epiinfo 2000. Most students were around 12 years of age and 94.5% related to practice some kind of sports. Results demonstrated that the possibility of tooth reimplantation after dental avulsion is not acknowledged among these students and dental traumatism was associated to caries, toothache, and use of orthodontic appliances. Only 18.9% of the students associated dental traumatism to an impact trauma; 3.6% would store the tooth in milk, and 3.1% believed the tooth could be reimplanted by anyone present at the accident site. In summary, the results show an overall the lack of knowledge about dental traumatism and highlight the need of special programs designed to educate school-aged students about emergency procedures to handle cases of dental traumatisms.

Evaluation of the influence of location of osseointegrated implants associated with mandibular removable partial dentures

Purpose: The aim of this research was to assess, by means of, the bi-dimensional finite element method, the best implant location in the alveolar edge, through stress distribution and support structure displacement of a distal extension removable partial denture associated with an osseointegrated implant of 10.0 x .75 mm, acting as abutment for the denture base.Methods and Materials: Five models in sagittal cut were used to represent: model A-hemi arch containing natural tooth 33 and the distal alveolar edge; model B-similar to model A, but with a conventional removable partial denture to replace the absent teeth; model C (MC)-similar to the previous one, with an implant in the distal region of the edge under the denture base; model D-similar to MC, with the implant in the central region of the edge; model E-similar to MC, with an implant in the mesial region of the edge. With the aid of the finite element program ANSYS 8.0, the models were loaded with strictly vertical forces of 50 N on each cusp tip. Displacement and von Mises Maps were plotted for visualization of results.Results: The introduction of implant diminished the tendency of intrusion of the removable partial denture in all situations. The maximum stress was observed on implant in all situations. Approximating implant in direction of support teeth was benefit for stress distribution.Conclusion: Model D presented the lowest value for maximum tendency to displacement when compared with those found in the other models; model E demonstrated better relief with regard to demand from the abutment tooth; locating the implant near of the abutment tooth influenced positively the distribution of stresses on the analyzed structures.

On the search for potential anti-Trypanosoma cruzi drugs: Synthesis and biological evaluation of 2-hydroxy-3-methylamino and 1,2,3-triazolic naphthoquinoidal compounds obtained by click chemistry reactions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Land reform in NE Brazil: a stochastic frontier production efficiency evaluation

O objetivo desse artigo é caracterizar as fontes da ineficiência técnica e alocativa em um conjunto de 308 beneficiários de um programa de reforma agrária de mercado, chamado Cédula da Terra;, distribuídos em cinco estados do Nordeste brasileiro. Estudos conduzidos por Buainain et al. (2002) mostraram existem poucas diferenças entre as características de beneficiários deste programa e dos programas tradicionais de reforma agrária por expropriação e que portanto, os resultados obtidos por este trabalho permitem visualizar as dificuldades enfrentadas pelos assentamentos no Brasil. Para medir eficiência, estimou-se uma função de produção potencial segundo a metodologia de Battese e Coelli (1995) e a partir disto, procurou-se explicar as razões da ineficiência (relativa) encontrada. Os resultados apontam para a existência de ineficiência técnica e alocativa que é identificada principalmente nas situações em que a presença de produção para consumo é elevada. Tratase de um resultado que revela a pouca maturidade da maioria dos lotes dos assentados do PCT e a dificuldade de superar as limitações impostas pela condição inicial de formação dos assentamentos de reforma agrária, principalmente na região nordeste do Brasil.

Evaluation of nine microsatellite loci and misidentification paternity frequency in a population of Gyr breed bovines

Erros de identificação de paternidade são prejudiciais por reduzir o ganho genético anual e comprometer um programa eficiente de melhoramento genético. O objetivo principal deste trabalho foi avaliar o potencial de uso de nove microssatélites em testes de paternidade e investigar a freqüência de erro de identificação de famílias de um rebanho de animais da raça Gir. No experimento foram utilizadas amostras de sangue de quarenta famílias (touro/ vaca/ bezerro) de animais da raça Gir, Puros de Origem e registrados na Associação Brasileira dos Criadores de Zebu (ABCZ). A maior parte dos microssatélites avaliados neste trabalho são recomendados, para Testes de Paternidade em bovinos, pela Sociedade Internacional de Genética Animal (ISAG). As regiões microssatélites TGLA122, TGLA126, BM1824, BMS2533, SPS115, ETH3, ETH10, ETH225 e POTCHA foram amplificadas por meio da técnica de PCR. Os produtos da amplificação foram separados por eletroforese em gel de poliacrilamida desnaturante. A partir dos dados obtidos foram calculadas as freqüências alélicas, diversidade gênica, conteúdo de polimorfismo informativo e probabilidade de exclusão para cada microssatélite. Também foram calculadas as freqüências genotípicas, heterozigosidade, probabilidade de exclusão combinada e probabilidade de Paternidade nas famílias consideradas. A probabilidade de exclusão combinada para todos os microssatélites estudados foi de 0,9789. Os resultados dos testes de paternidade acusaram erro de identificação em onze das 40 famílias estudadas, ou seja, 27,5% da amostra. A probabilidade de paternidade variou entre 0,8691 e 0,9999, com valor médio de 0,9512.

Genetic evaluation of performance traits in Brazilian Quarter Horse

The aim of this study was to estimate genetic parameters for racing performance traits in Quarter Horses in Brazil. The data (provided by the Sorocaba Jockey Club) came from 3 Brazilian hippodromes in 1994-2003, with 11875 observations of race time and 7775 of the speed index (Sl), distributed in 2403 and 2169 races, respectively. The variance components were estimated by the MTGSAM program, under animal models including the random additive genetic effect, random permanent environmental effect, and the fixed effects of sex, age and race. Heritabilities for race time and the SI, for the 3 distances studied (301, 365 and 402 in), varied from 0.26 to 0.41 and from 0. 14 to 0. 19, respectively, whereas repeatabilities varied from 0.36 to 0.68 (time) and from 0.27 to 0.42 (SI) and the genetic correlations from 0.90 to 0.97 (time) and from 0.67 to 0.73 (SI).