915 resultados para Process management, Service improvements, Six sigma, Financial services, Europe
Resumo:
Potential denitrification rates were measured using the acetylene block method, in sediments collected from streams in the sub-tropical, south-east Queensland region of Australia. Our aim was to estimate how much nitrogen could be removed from lotic systems by denitrification at the regional scale. Denitrification measured at 65 sites in August and September from a catchment of 22700 km(2) was extrapolated to all streams and rivers in the region based on the sediment area available for denitrification. Denitrification rates ranged between 4 and 950 mumol N m(-2) h(-1), with most sites having rates below 150 mumol N m(-2) h(-1). Based on these results, the current study estimates that a total of 305 t of nitrogen could be denitrified per year from all streams and rivers in the region, representing 6% of the total annual nitrogen load from surrounding land use. During baseflow conditions, when nitrogen loads to streams are low, the proportion of nitrogen removed through denitrification would be substantially higher, in some cases removing 100% of the nitrogen load. It is proposed that denitrification is an important process maintaining low concentrations of dissolved inorganic nitrogen under baseflow conditions and is therefore likely to enhance nitrogen limitation of primary production in this region.
Resumo:
How will financial institutions respond to the transactions and asset management needs of both the ageing population and their carers? The ageing of the population has generated increased interest from both government and business, including banking and financial services, in the sorts of services that will be required by older people, and how their money and property will be managed. This article examines the trends and implications for banking practice of this increasing population of customers and their carers.
Resumo:
Objective: Partnerships in mental health care, particularly between public and private psychiatric services, are being increasingly recognized as important for optimizing patient management and the efficient organization of services. However, public sector mental health services and private psychiatrists do not always work well together and there seem to be a number of barriers to effective collaboration. This study set out to investigate the extent of collaborative 'shared care' arrangements between a public mental health service and private psychiatrists practising nearby. It also examined possible barriers to collaboration and some possible solutions to the identified problems. Method: A questionnaire examining the above factors was sent to all public sector mental health clinicians and all private psychiatrists in the area. Results: One hundred and five of the 154 (68.2%) public sector clinicians and 103 of the 194 (53.1%) private psychiatrists returned surveys. The main barriers to successful collaboration identified by members of both sectors were: 'Difficulty communicating' endorsed by 71.4% of public clinicians and 72% of private psychiatrists, 'Confusion of roles and responsibilities' endorsed by 62.9% and 66%, respectively, and 'Different treatment approach' by 47.6% and 45.6%, respectively. Over 60% of private psychiatrists identified problems with access to the public system as a barrier to successful shared care arrangements. It also emerged, as hypothesized, that the public and private systems tend to manage different patient populations and that public clinicians in particular are not fully aware of the private psychiatrists' range of expertise. This would result in fewer referrals for shared care across the sectors. Conclusions: A number of barriers to public sector clinicians and private psychiatrists collaborating in shared care arrangements were identified. The two groups surveyed identified similar barriers. Some of these can potentially be addressed by changes to service systems. Others require cultural shifts in both sectors. Improved communications including more opportunities for formal and informal meetings between people working in the two sectors would be likely to improve the understanding of the complementary sector's perspective and practice. Further changes would be expected to require careful work between the sectors on training, employment and practice protocols and initiatives, to allow better use of the existing services and resources.
Resumo:
The majority of ‘service’ literature has focused on the production side of service work (i.e. employees and management), while treating the role of the customer and/or consumer as secondary (Korczynski and Ott, 2004). Those authors who have addressed the role consumption plays in shaping and maintaining individuals' self- identity have tended to overemphasize the dominance of consumer culture in shaping ‘our consciousness’ (Ritzer, 1999), with little in the way of empirical evidence to support these assertions. This paper develops the conceptualization of service work and consumer culture literature, by placing more emphasis on the customer in the service encounter. Using an ethnographic study of a ‘high class’ department store, this paper addresses employee and customer identity and the nature of managerial, employee and customer control within this ‘exclusive’ context. Of particular interest is how employees and customer’s ‘embody’ this control. Using Bourdieu’s (1986) conception of class and habitus, the concept of exclusivity goes beyond the management /service worker dyad by providing a means of investigating identity control by the organization over both customers and service workers. However, an organization’s exclusivity is not a closed normative pursuit of control, and shows this enterprise is part of a contested terrain, while revealing the ambiguity and ‘openness’ of control practices and pursuits. In order to uphold the ideal of exclusivity, management, service workers and customers must all engage in a precarious quest for establishing and maintaining a sense of control and/or identity. This paper demonstrates the continuing contradiction between bureaucratic practices of control and consumer culture, and highlights the need for research that investigates the context -dependent nature of control in service-related and consumer studies.
Resumo:
Este estudo teve como objetivo principal analisar a relação entre a Liderança Transformacional, a Conversão do Conhecimento e a Eficácia Organizacional. Foram considerados como pressupostos teóricos conceitos consolidados sobre os temas desta relação, além de recentes pesquisas já realizadas em outros países e contextos organizacionais. Com base nisto identificou-se potencial estudo de um modelo que relacionasse estes três conceitos. Para tal considera-se que as organizações que buscam atingir Vantagem Competitiva e incorporam a Knowledge-Based View possam conquistar diferenciação frente a seus concorrentes. Nesse contexto o conhecimento ganha maior destaque e papel protagonista nestas organizações. Dessa forma criar conhecimento através de seus colaboradores, passa a ser um dos desafios dessas organizações ao passo que sugere melhoria de seus indicadores Econômicos, Sociais, Sistêmicos e Políticos, o que se define por Eficácia Organizacional. Portanto os modos de conversão do conhecimento nas organizações, demonstram relevância, uma vez que se cria e se converte conhecimentos através da interação entre o conhecimento existente de seus colaboradores. Essa conversão do conhecimento ou modelo SECI possui quatro modos que são a Socialização, Externalização, Combinação e Internalização. Nessa perspectiva a liderança nas organizações apresenta-se como um elemento capaz de influenciar seus colaboradores, propiciando maior dinâmica ao modelo SECI de conversão do conhecimento. Se identifica então na liderança do tipo Transformacional, características que possam influenciar colaboradores e entende-se que esta relação entre a Liderança Transformacional e a Conversão do Conhecimento possa ter influência positiva nos indicadores da Eficácia Organizacional. Dessa forma esta pesquisa buscou analisar um modelo que explorasse essa relação entre a liderança do tipo Transformacional, a Conversão do Conhecimento (SECI) e a Eficácia Organizacional. Esta pesquisa teve o caráter quantitativo com coleta de dados através do método survey, obtendo um total de 230 respondentes válidos de diferentes organizações. O instrumento de coleta de dados foi composto por afirmativas relativas ao modelo de relação pesquisado com um total de 44 itens. O perfil de respondentes concentrou-se entre 30 e 39 anos de idade, com a predominância de organizações privadas e de departamentos de TI/Telecom, Docência e Recursos Humanos respectivamente. O tratamento dos dados foi através da Análise Fatorial Exploratória e Modelagem de Equações Estruturais via Partial Least Square Path Modeling (PLS-PM). Como resultado da análise desta pesquisa, as hipóteses puderam ser confirmadas, concluindo que a Liderança Transformacional apresenta influência positiva nos modos de Conversão do Conhecimento e que; a Conversão do Conhecimento influencia positivamente na Eficácia Organizacional. Ainda, concluiu-se que a percepção entre os respondentes não apresenta resultado diferente sobre o modelo desta pesquisa entre quem possui ou não função de liderança.
Resumo:
Purpose: The purpose of this paper is to describe how the application of systems thinking to designing, managing and improving business processes has resulted in a new and unique holonic-based process modeling methodology know as process orientated holonic modeling. Design/methodology/approach: The paper describes key systems thinking axioms that are built upon in an overview of the methodology; the techniques are described using an example taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. These were produced in an 18 month project, using an action research approach, to improve quality and process efficiency. Findings: The findings of this research show that this new methodology can support process depiction and improvement in industrial sectors which are characterized by environments of high variety and low volume (e.g. projects; such as the design and manufacture of a radar system or a hybrid production process) which do not provide repetitive learning opportunities. In such circumstances, the methodology has not only been able to deliver holonic-based process diagrams but also been able to transfer strategic vision from top management to middle and operational levels without being reductionistic. Originality/value: This paper will be of interest to organizational analysts looking at large complex projects whom require a methodology that does not confine them to thinking reductionistically in "task-breakdown" based approaches. The novel ideas in this paper have great impact on the way analysts should perceive organizational processes. Future research is applying the methodology in similar environments in other industries. © Emerald Group Publishing Limited.
Resumo:
In an exploding and fluctuating construction market, managers are facing a challenge, which is how to manage business on a wider scale and to utilize modern developments in information technology to promote productivity. The extraordinary development of telecommunications and computer technology makes it possible for people to plan, lead, control, organize and manage projects from a distance without the need to be on site on a daily basis. A modern management known as distance management (DM) or remote management is emerging. Physical distance no longer determines the boundary of management since managers can now operate projects through virtual teams that organize manpower, material and production without face-to-face communication. What organization prototype could overcome psychological and physical barriers to reengineer a successful project through information technology? What criteria distinguishes the adapted way of communication of individual activities in a teamwork and assist the integration of an efficient and effective communication between face-to-face and a physical distance? The entire methodology has been explained through a case application on refuse incineration plant projects in Taiwan.
Resumo:
Materials management function is always a major concern to the management of any industrial organisation as high inventory and an inefficient procurement process affect the profitability to a great extent. Problems multiply due to a very current business environment in India. Hence, existing materials planning and procurement processes and inventory management systems require a re-look with respect to a changing business environment. This study shows a radical improvement in materials management function of an Indian petroleum refinery through business process re-engineering (BPR) by analysing current processes, identifying key issues, deriving paradigm shifts and developing re-engineered processes through customer value analysis. BPR has been carried out on existing processes of “materials planning and procurement” and “warehousing and surplus disposal”. The re-engineered processes for materials management function trigger a few improvement projects that were identified by the group of executives who took part in the re-engineering exercise. Those projects were implemented in an integrated framework with the application of the state of art information technology tools.
Resumo:
This paper presents a case study of the use of business-process simulation within the context of a business-process-reengineering approach to change. The process-based change methodology provides context to the simulation technique in that it connects the aims of a business-process simulation (BPS) study to the strategic aims of the organisation and incorporates a consideration of human factors in order to achieve successful implementation of redesigned processes. Conversely, the ability of BPS to incorporate system variability, scenario analysis and a visual display to communicate process performance makes it a useful technique to provide a realistic assessment of the need for, and results of, change.
Resumo:
Business process simulation (BPS) is used to evaluate the effect of the redesign of a police road traffic accident (RTA) reporting system. The new system aims to provide timely statistical analysis of traffic behaviour to government bodies and to enable more effective utilisation of traffic police personnel. The simulation method is demonstrated in the context of assisting process change enabled by the use of information systems in an organisation in which there had been a historically mixed pattern of success in this activity.
Resumo:
In recent years the scale and scope of retailer internationalisation activity has grown markedly, mainly through increasing levels of cross-border merger and acquisition activity. This has been particularly prevalent among companies operating in the food retail sector. During this time, and within the context of increased merger and acquisition activity in international markets, the financial institutions have taken an increasingly prominent role in the retail internationalisation process. Explores the nature of the financial institutions’ role in the retailer internationalisation process and, specifically, the extent to which the financial institutions actually inhibit and/or promote retail international activity. A key purpose of this study is to examine some of the drivers and inhibitors of the retailer internationalisation process. Reports the findings from 30 in-depth interviews with food retail analysts of the leading investment banks in the City of London. The findings from this study should help to provide further insights into the nature of the retailer internationalisation process.