Prediction of individual automobile RBNS claim reserves in the context of Solvency II

Automobile bodily injury (BI) claims remain unsettled for a long time after the accident. The estimation of an accurate reserve for Reported But Not Settled (RBNS) claims is therefore vital for insurers. In accordance with the recommendation included in the Solvency II project (CEIOPS, 2007) a statistical model is here implemented for RBNS reserve estimation. Lognormality on empirical compensation cost data is observed for different levels of BI severity. The individual claim provision is estimated by allocating the expected mean compensation for the predicted severity of the victim’s injury, for which the upper bound is also computed. The BI severity is predicted by means of a heteroscedastic multiple choice model, because empirical evidence has found that the variability in the latent severity of injured individuals travelling by car is not constant. It is shown that this methodology can improve the accuracy of RBNS reserve estimation at all stages, as compared to the subjective assessment that has traditionally been made by practitioners.

Error en el consentimiento en los contratos de SWAP

Cada cert temps hi ha assumptes d’alt interès social dins de la jurisdicció. En els últims anys, coincidint amb la crisi financera internacional, els assumptes relatius a contractes bancaris complexos, sobretot permutes financeres o swaps, han tingut una gran rellevància. En un context de crisi financera internacional, i també nacional, s'han estès el nombre de demandes dirigides contra bancs i entitats financeres. Són reclamacions en les quals se sol·licita la declaració de nul·litat dels citats contractes, principalment es basa en un error del consentiment, nul·litat que comporta la devolució de les quantitats invertides, de les rentabilitats esperades o de les penalitzacions aplicades davant la resolució anticipada d'us contractes pels clients defraudats en les seves expectatives. Les presents pàgines pretenen un estudi dels litigis sobre SWAPS, principalment dels “Interest Rate Swap”, identificar quins són els contractes bancaris complexes, quines són les normes de consentiment contractual que els regeixen. Respecte dels primers, cal destacar que l'elevat nombre de casos plantejats davant els nostres tribunals no es tradueix en una casuística tan àmplia com seria imaginable. La gran majoria versa sobre les peticions de nul·litat del contracte (total o parcial) realitzades pels clients, al moment en què l'Euribor va descendir, i que allò que molts havien contractat com un segur de cobertura enfront dels elevats tipus d'interès que havien de pagar per les seves hipoteques, veien com conforme als pactes en el contracte, havien de satisfer al seu contrapart (una entitat de crèdit) una liquidació.

Eliminating Software Failures - A Literature Survey

Software faults are expensive and cause serious damage, particularly if discovered late or not at all. Some software faults tend to be hidden. One goal of the thesis is to figure out the status quo in the field of software fault elimination since there are no recent surveys of the whole area. Basis for a structural framework is proposed for this unstructured field, paying attention to compatibility and how to find studies. Bug elimination means are surveyed, including bug knowhow, defect prevention and prediction, analysis, testing, and fault tolerance. The most common research issues for each area are identified and discussed, along with issues that do not get enough attention. Recommendations are presented for software developers, researchers, and teachers. Only the main lines of research are figured out. The main emphasis is on technical aspects. The survey was done by performing searches in IEEE, ACM, Elsevier, and Inspect databases. In addition, a systematic search was done for a few well-known related journals from recent time intervals. Some other journals, some conference proceedings and a few books, reports, and Internet articles have been investigated, too. The following problems were found and solutions for them discussed. Quality assurance is testing only is a common misunderstanding, and many checks are done and some methods applied only in the late testing phase. Many types of static review are almost forgotten even though they reveal faults that are hard to be detected by other means. Other forgotten areas are knowledge of bugs, knowing continuously repeated bugs, and lightweight means to increase reliability. Compatibility between studies is not always good, which also makes documents harder to understand. Some means, methods, and problems are considered method- or domain-specific when they are not. The field lacks cross-field research.

Bias and standard error for social reciprocity measurements

The directional consistency and skew-symmetry statistics have been proposed as global measurements of social reciprocity. Although both measures can be useful for quantifying social reciprocity, researchers need to know whether these estimators are biased in order to assess descriptive results properly. That is, if estimators are biased, researchers should compare actual values with expected values under the specified null hypothesis. Furthermore, standard errors are needed to enable suitable assessment of discrepancies between actual and expected values. This paper aims to derive some exact and approximate expressions in order to obtain bias and standard error values for both estimators for round-robin designs, although the results can also be extended to other reciprocal designs.

Entrevista con Manuel Villegas sobre 'El error de Prometeo. Psico(pato)logía del desarrollo moral'

Entrevista con Manuel Villegas

Minimization of the experimental workload for the prediction of pollutants propagation in rivers. Mathematical modelling and knowledge re-use

The present thesis in focused on the minimization of experimental efforts for the prediction of pollutant propagation in rivers by mathematical modelling and knowledge re-use. Mathematical modelling is based on the well known advection-dispersion equation, while the knowledge re-use approach employs the methods of case based reasoning, graphical analysis and text mining. The thesis contribution to the pollutant transport research field consists of: (1) analytical and numerical models for pollutant transport prediction; (2) two novel techniques which enable the use of variable parameters along rivers in analytical models; (3) models for the estimation of pollutant transport characteristic parameters (velocity, dispersion coefficient and nutrient transformation rates) as functions of water flow, channel characteristics and/or seasonality; (4) the graphical analysis method to be used for the identification of pollution sources along rivers; (5) a case based reasoning tool for the identification of crucial information related to the pollutant transport modelling; (6) and the application of a software tool for the reuse of information during pollutants transport modelling research. These support tools are applicable in the water quality research field and in practice as well, as they can be involved in multiple activities. The models are capable of predicting pollutant propagation along rivers in case of both ordinary pollution and accidents. They can also be applied for other similar rivers in modelling of pollutant transport in rivers with low availability of experimental data concerning concentration. This is because models for parameter estimation developed in the present thesis enable the calculation of transport characteristic parameters as functions of river hydraulic parameters and/or seasonality. The similarity between rivers is assessed using case based reasoning tools, and additional necessary information can be identified by using the software for the information reuse. Such systems represent support for users and open up possibilities for new modelling methods, monitoring facilities and for better river water quality management tools. They are useful also for the estimation of environmental impact of possible technological changes and can be applied in the pre-design stage or/and in the practical use of processes as well.

Application of GA-PLS and GA-KPLS calculations for the prediction of the retention indices of essential oils

Genetic algorithm and partial least square (GA-PLS) and kernel PLS (GA-KPLS) techniques were used to investigate the correlation between retention indices (RI) and descriptors for 117 diverse compounds in essential oils from 5 Pimpinella species gathered from central Turkey which were obtained by gas chromatography and gas chromatography-mass spectrometry. The square correlation coefficient leave-group-out cross validation (LGO-CV) (Q²) between experimental and predicted RI for training set by GA-PLS and GA-KPLS was 0.940 and 0.963, respectively. This indicates that GA-KPLS can be used as an alternative modeling tool for quantitative structure-retention relationship (QSRR) studies.

Espectroscopia no infravermelho médio e análise sensorial aplicada à detecção de adulteração de café torrado por adição de cascas de café

Mid-infrared spectroscopy and chemometrics were used to identify adulteration in roasted and ground coffee by addition of coffee husks. Consumers' sensory perception of the adulteration was evaluated by a triangular test of the coffee beverages. Samples containing above 0.5% of coffee husks from pure coffees were discriminated by principal component analysis of the infrared spectra. A partial least-squares regression estimated the husk content in samples and presented a root-mean-square error for prediction of 2.0%. The triangular test indicated that were than 10% of coffee husks are required to cause alterations in consumer perception about adulterated beverages.

Aplicação de técnicas multivariadas e inteligência artificial na análise de espectros de infravermelho para determinação de matéria orgânica em amostras de solos

In this paper studies based on Multilayer Perception Artificial Neural Network and Least Square Support Vector Machine (LS-SVM) techniques are applied to determine of the concentration of Soil Organic Matter (SOM). Performances of the techniques are compared. SOM concentrations and spectral data from Mid-Infrared are used as input parameters for both techniques. Multivariate regressions were performed for a set of 1117 spectra of soil samples, with concentrations ranging from 2 to 400 g kg-1. The LS-SVM resulted in a Root Mean Square Error of Prediction of 3.26 g kg-1 that is comparable to the deviation of the Walkley-Black method (2.80 g kg-1).

Implementação de um método robusto para o controle fiscal de umidade em queijo minas artesanal. Abordagem metrológica multivariada

This study developed and validated a method for moisture determination in artisanal Minas cheese, using near-infrared spectroscopy and partial-least-squares. The model robustness was assured by broad sample diversity, real conditions of routine analysis, variable selection, outlier detection and analytical validation. The model was built from 28.5-55.5% w/w, with a root-mean-square-error-of-prediction of 1.6%. After its adoption, the method stability was confirmed over a period of two years through the development of a control chart. Besides this specific method, the present study sought to provide an example multivariate metrological methodology with potential for application in several areas, including new aspects, such as more stringent evaluation of the linearity of multivariate methods.

PREDICTING THE BOILING POINT OF PCDD/Fs BY THE QSPR METHOD BASED ON THE MOLECULAR DISTANCE-EDGE VECTOR INDEX

The quantitative structure property relationship (QSPR) for the boiling point (Tb) of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) was investigated. The molecular distance-edge vector (MDEV) index was used as the structural descriptor. The quantitative relationship between the MDEV index and Tb was modeled by using multivariate linear regression (MLR) and artificial neural network (ANN), respectively. Leave-one-out cross validation and external validation were carried out to assess the prediction performance of the models developed. For the MLR method, the prediction root mean square relative error (RMSRE) of leave-one-out cross validation and external validation was 1.77 and 1.23, respectively. For the ANN method, the prediction RMSRE of leave-one-out cross validation and external validation was 1.65 and 1.16, respectively. A quantitative relationship between the MDEV index and Tb of PCDD/Fs was demonstrated. Both MLR and ANN are practicable for modeling this relationship. The MLR model and ANN model developed can be used to predict the Tb of PCDD/Fs. Thus, the Tb of each PCDD/F was predicted by the developed models.

Models and applications for risk assessment and prediction of Asian soybean rust epidemics

Asian rust of soybean [Glycine max (L.) Merril] is one of the most important fungal diseases of this crop worldwide. The recent introduction of Phakopsora pachyrhizi Syd. & P. Syd in the Americas represents a major threat to soybean production in the main growing regions, and significant losses have already been reported. P. pachyrhizi is extremely aggressive under favorable weather conditions, causing rapid plant defoliation. Epidemiological studies, under both controlled and natural environmental conditions, have been done for several decades with the aim of elucidating factors that affect the disease cycle as a basis for disease modeling. The recent spread of Asian soybean rust to major production regions in the world has promoted new development, testing and application of mathematical models to assess the risk and predict the disease. These efforts have included the integration of new data, epidemiological knowledge, statistical methods, and advances in computer simulation to develop models and systems with different spatial and temporal scales, objectives and audience. In this review, we present a comprehensive discussion on the models and systems that have been tested to predict and assess the risk of Asian soybean rust. Limitations, uncertainties and challenges for modelers are also discussed.

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.