951 resultados para Poultry -- Feeding and feeds


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Marine turtles are reptiles that occur on the Brazilian coast and can travel very large distances between feeding and nesting grounds. Five species found in Brazil are threatened. The consumption of turtle meat and eggs is an ancient habit in many coastal communities around the world. The main causes that threaten these species are the increase in fishing and the drastic changes in the environment. The presence of turtles near the beaches and their accidental capture were reported by fishermen in the region of Cananéia, where this work was developed. This study was also made based in interviews of fishermen that living in the area and the follow up of their fishing activities. This methodology made possible to identify the turtles in the area, the behavior of the fishermen with these animals and the relation between non-commercial fishing and turtles. The fishing traps area has a direct relation with the capture of turtles. The higher incidence of turtle capture is usually next to islands, rocky coasts, low lands and bay entrances, which are areas where the most common species of the region (Chelonia mydas) normally look for food. The fishermen opinions about the critical situation of these species and their conservation has also been studied. Several programs in Environmental Education for the communities of the region have been recommended

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Human development and population growth during the twentieth century increased the water demand, tripling its consumption between 1950 and 1990. As the water streams were polluted; and as water is the source of minerals and also regulates vital functions, it becomes the vehicle of transmission and consequently spreads many diseases. Probably, the industries are the major responsible for this pollution when they dump untreated effluents to water streams, saturating the already insufficient net of sanitation facilities polluting water and soil. An effective treatment has been established with low cost in Europe and the United States, through constructed systems on wetlands Constructed Wetland Systems - CWSs, gradually used in other countries in the last three decades. Lately, we observe a continuous growth in Brazilian poultry business, and poultry industry showed greatest dynamism in the country, following the global market. Pondering this information and the efficiency of such treatment, this work aimed to study prototypes, in a laboratory scale, simulating ascending and descending types of CWSs, vegetated with aquatic macrophytes Eichhornia crassipes and the uses of aggregates and soil, to treat industrial wastewater from slaughterhouses and aviary. We conducted the initial characterization of the effluent to have an idea of its constituents and to scale the system and the continuous flow. Furthermore, we characterized the soil to be used in this system. The collects are periodically made in the refrigeration industry FRICOCK FRIGORIFICAÇÃO AVICULTURA INDÚSTRIA E COMÉRCIO LTDA. for local treatment simulation. The effluent that was treated with 12 prototypes of CWSs are analyzed with some frequency. The results of these reviews were compared to the effluent coming from the industry... (Complete abstract click electronic access below)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The change from the uterine environment to the external environment that occurs afterbirth requires rapid adaptation of the newborn. The right care in the first 24 hours of life can significantly reduce calves’ mortality. In this context, are included essential care to animals that are born weak and require immediate assistance so they can adapt to the extra uterine environment, such as stimulating the onset of spontaneous breathing and thermoregulation. The essential care is also related to colostrum feeding and treatment of the navel. The objective of this work is to bring together some of the major causes of morbidity and mortality in the first 24 hours of life of the newborn calf and discuss some of the special care that these animals require

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: Breast-feeding has stood out as health care measure and is part of the Government’s National Health Policy, involving dental professionals. However, it has been suggested that breast milk could be a risk factor for the development of early childhood caries. Objective: The purpose of this report was to search for scientific evidence that would support or refute the statement that breastfeeding is associated with the development of early childhood caries. Method: Medline and SciELO databases were consulted to retrieve studies, ranging from laboratory investigations to epidemiological surveys, which relate breastfeeding to dental caries. The key words ‘breast-feedingand ‘dental caries’ were used on the reference search. There was no scientific evidence that could demonstrate a clear relationship between breast milk and cariogenicity. This is attributed to fact that dental caries is a multifactorial disease that is susceptible to multiple confusing factors, among which the early introduction of sucrose to the infant’s diet and late introduction of oral hygiene habits. The dentist should encourage exclusive breast-feeding because, in addition to the undeniable benefits to the child’s physical and psychological health, it contributes to a harmonic facial growth and prevents the development of atypical deglutition and malocclusions, in combination with early introduction of oral hygiene habits and noncariogenic diet. Conclusion: There is no scientific evidence to demonstrate an association between breast-feeding and early childhood caries.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work aimed to evaluate the attractiveness, non-preference for feeding and antibiosis in straight and runner growth habit peanut cultivars to Stegasta bosquella (Chambers). Eight cultivars were evaluated, four of straight growth habit (IAC Tatu, IAC 22, IAC 8112 and IAC 5) and four of runner growth habit (IAC Runner 886, IAC 147, IAC 125 and IAC 503). Free-choice and no-choice feeding tests were performed, using pairs of overlapped leaf discs with 1.0 cm diameter, which were placed in Petri dishes where third instar larvae of S. bosquella were released. The attractiveness to the larvae was assessed in predetermined times, in addition to the dry mass consumed. In the antibiosis assay, the biological parameters were evaluated: period and viability of larvae, pre-pupae, pupae, and total, weight of larvae and pupae, sex ratio and longevity. None of the runner growth habit cultivars exhibited non-preference for feeding-type resistance. Among the straight growth habit cultivars, IAC 5 and IAC 22 were the least attractive and consumed in the free-choice feeding test, and IAC 5 and IAC 8112 were the least attractive in the no-choice test. The runner growth habit cultivars IAC 147 and IAC Runner 886 affected the larval survival of S. bosquella, exhibiting antibiosis-type resistance. For the straight growth habit cultivars, IAC 22 and IAC 8112 affected the larval viability, presenting antibiosis-type resistance. The straight and runner growth habit cultivars did not influence the biological parameters of weight of pupae, sex ratio and longevity of S. bosquella.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Growing in orange on Terra Mulata has been submitted nutrient limitation requiring correction in agricultural areas. The application of biochar associated with another source of nutrients can be a viable alternative to increase the efficiency of fertilizers and reduce losses in the areas. The objective of this study was to evaluate the effect of biochar, poultry litter and NPK in the nutritional status of orange trees grown in an Oxisol with anthropogenic A horizon (Terra Mulata). The study was conducted in a rural property landfall in Manacapuru (AM) in a randomized block design with eight treatments using biochar, poultry litter and NPK (4-14-8) applied in isolation and associates. To review two samples were taken at different periods of sheets to determine the nutritional status. Fertilizers applied did not increase the efficiency in the availability of contents of N, P, Fe and Zn, being the latter below the range of suitable content. As for the K, compost chicken manure and their combinations increased their availability, and the highest levels of Mg were found in the control treatment.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In experimental conditions, cutting forces were studied during turning of green alumina billets, including their correlation with surface aspects of the workpiece. The correlation between cutting power and the removal rate are important parameters for defining the design of ceramic products, since inadequate parameters can produce excessive surface damage to the workpiece. This study examined the forces obtained during turning of alumina workpieces with 99.8% purity in their green state, by means of a three-point dynamometer, evaluating the cutting, feed and depth forces, using a cermet tool under constant machining conditions. Variables were compared with the forces, including surface finish, tool wear and temperature during machining. In the study, it was found that the depth of cut had no significant effect on the surface quality, and the cutting speed and feed influencing the finish. However, preliminary tests for selecting the cutting conditions showed that unsuitables cutting speeds and feeds generate severe damage to the workpiece surface. The best condition was 1.00 mm depth of cut, and the forces increasedfor with each pass performed, with the feed force the variable with greatest increases in relation to the cutting and depth forces, and wear of the cutting tool directly influenced the surface finish, generated by the highly abrasive nature of the alumina particles of the green compact. It is emphasized that the alumina in its green state showed high abrasive effect on the cutting tool during the turning process and the surface finishing of the green workpiece had a direct influence on the sintered workpiece.