High volume fabrication of laser targets using MEMS techniques

The latest techniques for the fabrication of high power laser targets, using processes developed for the manufacture of Micro-Electro-Mechanical System (MEMS) devices are discussed. These laser targets are designed to meet the needs of the increased shot numbers that are available in the latest design of laser facilities. Traditionally laser targets have been fabricated using conventional machining or coarse etching processes and have been produced in quantities of 10s to low 100s. Such targets can be used for high complexity experiments such as Inertial Fusion Energy (IFE) studies and can have many complex components that need assembling and characterisation with high precision. Using the techniques that are common to MEMS devices and integrating these with an existing target fabrication capability we are able to manufacture and deliver targets to these systems. It also enables us to manufacture novel targets that have not been possible using other techniques. In addition, developments in the positioning systems that are required to deliver these targets to the laser focus are also required and a system to deliver the target to a focus of an F2 beam at 0.1Hz is discussed.

Shooting for the Moon or Flying Too Near the Sun? Crossing the Value Rubicon in Precision Cancer Care

In his last two State of the Union addresses, President Barack Obama has focused on the need to deliver innovative solutions to improve human health, through the Precision Medicine Initiative in 2015 and the recently announced Cancer Moonshot in 2016. Precision cancer care has delivered clear patient benefit, but even for high-impact medicines such as imatinib mesylate (Glivec) in chronic myeloid leukaemia, the excitement at the success of this practice-changing clinical intervention has been somewhat tempered by the escalating price of this 'poster child' for precision cancer medicine (PCM). Recent studies on the costs of cancer drugs have revealed significant price differentials, which are a major causative factor behind disparities in the access to new generations of immunological and molecularly targeted agents. In this perspective, we will discuss the benefits of PCM to modern cancer control, but also emphasise how increasing costs are rendering the current approaches to integrating the paradigm of PCM unsustainable. Despite the ever increasing pressure on cancer and health care budgets, innovation will and must continue. Value-based frameworks offer one of the most rational approaches for policymakers committed to improving cancer outcomes through a public health approach.

Temporal aggregation of migration counts can improve accuracy and precision of trends

Temporal replicate counts are often aggregated to improve model fit by reducing zero-inflation and count variability, and in the case of migration counts collected hourly throughout a migration, allows one to ignore nonindependence. However, aggregation can represent a loss of potentially useful information on the hourly or seasonal distribution of counts, which might impact our ability to estimate reliable trends. We simulated 20-year hourly raptor migration count datasets with known rate of change to test the effect of aggregating hourly counts to daily or annual totals on our ability to recover known trend. We simulated data for three types of species, to test whether results varied with species abundance or migration strategy: a commonly detected species, e.g., Northern Harrier, Circus cyaneus; a rarely detected species, e.g., Peregrine Falcon, Falco peregrinus; and a species typically counted in large aggregations with overdispersed counts, e.g., Broad-winged Hawk, Buteo platypterus. We compared accuracy and precision of estimated trends across species and count types (hourly/daily/annual) using hierarchical models that assumed a Poisson, negative binomial (NB) or zero-inflated negative binomial (ZINB) count distribution. We found little benefit of modeling zero-inflation or of modeling the hourly distribution of migration counts. For the rare species, trends analyzed using daily totals and an NB or ZINB data distribution resulted in a higher probability of detecting an accurate and precise trend. In contrast, trends of the common and overdispersed species benefited from aggregation to annual totals, and for the overdispersed species in particular, trends estimating using annual totals were more precise, and resulted in lower probabilities of estimating a trend (1) in the wrong direction, or (2) with credible intervals that excluded the true trend, as compared with hourly and daily counts.

New mechanical samples positioning system for irradiations on a radial channel at nuclear research reactor in a full-power continuous operation

FAPESP:97/5550

Monitoring sandy shores morphologies by DGPS: a practical tool to generate digital elevation models

The highly dynamic nature of some sandy shores with continuous morphological changes require the development of efficient and accurate methodological strategies for coastal hazard assessment and morphodynamic characterisation. During the past decades, the general methodological approach for the establishment of coastal monitoring programmes was based on photogrammetry or classical geodetic techniques. With the advent of new geodetic techniques, space-based and airborne-based, new methodologies were introduced in coastal monitoring programmes. This paper describes the development of a monitoring prototype that is based on the use of global positioning system (GPS). The prototype has a GPS multiantenna mounted on a fast surveying platform, a land vehicle appropriate for driving in the sand (four-wheel quad). This system was conceived to perform a network of shore profiles in sandy shores stretches (subaerial beach) that extend for several kilometres from which high-precision digital elevation models can be generated. An analysis of the accuracy and precision of some differential GPS kinematic methodologies is presented. The development of an adequate survey methodology is the first step in morphodynamic shore characterisation or in coastal hazard assessment. The sample method and the computational interpolation procedures are important steps for producing reliable three-dimensional surface maps that are real as possible. The quality of several interpolation methods used to generate grids was tested in areas where there were data gaps. The results obtained allow us to conclude that with the developed survey methodology, it is possible to Survey sandy shores stretches, under spatial scales of kilometers, with a vertical accuracy of greater than 0.10 m in the final digital elevation models.

Automated Collection of Sign Inventory Information by Integrating Global Positioning System (GPS) with Videologging Data Collection Activities, 1995

Advances in communication, navigation and imaging technologies are expected to fundamentally change methods currently used to collect data. Electronic data interchange strategies will also minimize data handling and automatically update files at the point of capture. This report summarizes the outcome of using a multi-camera platform as a method to collect roadway inventory data. It defines basic system requirements as expressed by users, who applied these techniques and examines how the application of the technology met those needs. A sign inventory case study was used to determine the advantages of creating and maintaining the database and provides the capability to monitor performance criteria for a Safety Management System. The project identified at least 75 percent of the data elements needed for a sign inventory can be gathered by viewing a high resolution image.

Positioning Australia’s contemporary health and physical education curriculum to address poor physical activity participation rates by adolescent girls

Swath bathymetry using phase difference: Theoretical analysis of acoustical measurement precision

The phase difference principle is widely applied nowadays to sonar systems used for sea floor bathymetry, The apparent angle of a target point is obtained from the phase difference measured between two close receiving arrays. Here we study the influence of the phase difference estimation errors caused by the physical structure of the backscattered signals. It is shown that, under certain current conditions, beyond the commonly considered effects of additive external noise and baseline decorrelation, the processing may be affected by the shifting footprint effect: this is due to the fact that the two interferometer receivers get simultaneous echo contributions coming from slightly shifted seabed parts, which results in a degradation of the signal coherence and, hence, of the phase difference measurement. This geometrical effect is described analytically and checked with numerical simulations, both for square- and sine-shaped signal envelopes. Its relative influence depends on the geometrical configuration and receiver spacing; it may be prevalent in practical cases associated with bathymetric sonars. The cases of square and smooth signal envelopes are both considered. The measurements close to nadir, which are known to be especially difficult with interferometry systems, are addressed in particular.

Efeitos diretos e indiretos de parâmetros dos semivariogramas referentes aos atributos químicos do solo sobre a produtividade de grãos de soja

In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.

Image-Guided Precision Manipulation of Cells and Nanoparticles in Microfluidics

Manipulation of single cells and particles is important to biology and nanotechnology. Our electrokinetic (EK) tweezers manipulate objects in simple microfluidic devices using gentle fluid and electric forces under vision-based feedback control. In this dissertation, I detail a user-friendly implementation of EK tweezers that allows users to select, position, and assemble cells and nanoparticles. This EK system was used to measure attachment forces between living breast cancer cells, trap single quantum dots with 45 nm accuracy, build nanophotonic circuits, and scan optical properties of nanowires. With a novel multi-layer microfluidic device, EK was also used to guide single microspheres along complex 3D trajectories. The schemes, software, and methods developed here can be used in many settings to precisely manipulate most visible objects, assemble objects into useful structures, and improve the function of lab-on-a-chip microfluidic systems.

New design of electrostatic mirror actuators for application in high-precision interferometry

We describe a new geometry for electrostatic actuators to be used in sensitive laser interferometers, suited for prototype and table top experiments related to gravitational wave detection with mirrors of 100 g or less. The arrangement consists of two plates at the sides of the mirror (test mass), and therefore does not reduce its clear aperture as a conventional electrostatic drive (ESD) would do. Using the sample case of the AEI-10 m prototype interferometer, we investigate the actuation range and the influence of the relative misalignment of the ESD plates with respect to the test mass. We find that in the case of the AEI-10 m prototype interferometer, this new kind of ESD could provide a range of 0.28 mu m when operated at a voltage of 1 kV. In addition, the geometry presented is shown to provide a reduction factor of about 100 in the magnitude of the actuator motion coupling to the test mass displacement. We show that therefore in the specific case of the AEI-10 m interferometer, it is possible to mount the ESD actuators directly on the optical table without spoiling the seismic isolation performance of the triple stage suspension of the main test masses.