Joan Robinson Was Almost Right: Output under Third-Degree Price Discrimination

In this paper, we show that in order for third-degree price discrimination to increase total output, the demands of the strong markets should be, as conjectured by Robinson (1933), more concave than the demands of the weak markets. By making the distinction between adjusted concavity of the inverse demand and adjusted concavity of the direct demand, we are able to state necessary conditions and sufficient conditions for third-degree price discrimination to increase total output.

R&D Policy in Economies with Endogenous Growth and Non-Renewable Resources

The aim of this paper is to analyze how active R&D policies affect the growth rate of an economy with endogenous growth and non-renewable resources. We know from Scholz and Ziemens (1999) and Groth (2006) that in infinitely lived agents (ILA) economies, any active R&D policy increases the growth rate of the economy. To see if this result also appears in economies with finite lifetime agents, we developed an endogenous growth overlapping generations (OLG) economy à la Diamond which uses non-renewable resources as essential inputs in final good’s production. We show analytically that any R&D policy that reduces the use of natural resources implies a raise in the growth rate of the economy. Numerically we show that in economies with low intertemporal elasticity of substitution (IES), active R&D policies lead the economy to increase the depletion of non-renewable resources. Nevertheless, we find that active R&D policies always imply increases in the endogenous growth rate, in both scenarios. Furthermore, when the IES coefficient is lower (greater) than one, active R&D policies affect the growth rate of the economy in the ILA more (less) than in OLG economies.

Sermam que pregou o R. P. Antonio Vieira da Companhia de Jesus, na Capella Real o primeiro de janeiro de 1642

Apresenta o sermão proferido pelo padre Antonio Vieira na Capela Imperial em 1º de janeiro de 1642. O documento reflete a batalha jur��dica e teológica para a Restauração da coroa de Portugal, também defendida por teólogos através de sermões que eram publicados às expensas do Tesouro Real

De re etymologica: vasc. -(r)antz ‘hacia’

Iker bilduma = Colección Iker, nº 17

Vida de D. Nuno Alvares Pereyra, segundo condestavel de Portugal, conde de Ourem Arrayolos, e Barcellos, mordomo mor de El Rey D. João o primeiro; Senhor donatário das Villas de Valença, Basto, Bouças, Baltar... : progenitor da Casa Real, pela Serenissima de Bragança em Portugal, ascendente das de Castella, França, Austria, Saboya, e dos monarcas, soberanos, principes, potentados, senhores e ilustres famílias da Europa : novamente composta pelo M. R. Padre Fr. Domingos Teixeyra, religioso eremita de Santo Agostinho, offerecida á magestade de Elrey D. João V, Nosso Senhor

Frei Domingos Teixeira, religioso da Ordem de Santo Agostinho e historiador, nasceu em Celorico de Basto entre os anos de 1675 e 1680 e morreu em 1726. Professou, em 1695, no Convento da Graça, em Lisboa e exerceu o cargo de Sacristão-Mor do Convento da Penha de França. Dedicou-se a escrever narrativas históricas, tendo sido acusado de plagiar ‘A Vida do Condestável’, de Jacinto Freire de Andrade, utilizando-se de anotações deste escritor. Trata-se da primeira edição da obra, que teve ainda uma segunda edição, custeada pelo livreiro Inácio Nogueira Xisto, na Oficina de Francisco Luis Ameno, em 1749. José dos Santos em seu ‘Catálogo da Livraria do Conde de Arneal’ nos diz que ‘a primeira edição é muito estimada e rara, sendo considerada obra de bastante merecimento para o estudo e história do Santo Condestável D. Nuno Álvares Pereira e dos seus heroicos feitos militares

Numerical Simulation of R-M Instability

In order to capture shock waves and contact discontinuities in the field and easy to program with parallel computation a new algorithm is developed to solve the N-S equations for simulation of R-M instability problems. The method with group velocity control is used to suppress numerical oscillations, and an adaptive non-uniform mesh is used to get fine resolution. Numerical results for cylindrical shock-cylindrical interface interaction with a shock Mach number Ms=1.2 and Atwood number A=0.818, 0.961, 0.980 (the interior density of the interface/outer density p(1)/p(2) = 10, 50, 100, respectively), and for the planar shock-spherical interface interaction with Ms=1.2 and p(1)/p(2) = 14.28are presented. The effect of Atwood number and multi-mode initial perturbation on the R-M instability are studied. Multi-collisions of the reflected shock with the interface is a main reason of nonlinear development of the interface instability and formation of the spike-bubble structures In simulation with double mode perturbation vortex merging and second instability are found. After second instability the small vortex structures near the interface produced. It is important factor for turbulent mixing.

Protected species aerial survey data collection and analysis in waters underlying the R-5306A airspace: final report submitted to US Marine Corps, MCAS Cherry Point

To be in compliance with the Endangered Species Act and the Marine Mammal Protection Act, the United States Department of the Navy is required to assess the potential environmental impacts of conducting at-sea training operations on sea turtles and marine mammals. Limited recent and area-specific density data of sea turtles and dolphins exist for many of the Navy’s operations areas (OPAREAs), including the Marine Corps Air Station (MCAS) Cherry Point OPAREA, which encompasses portions of Core and Pamlico Sounds, North Carolina. Aerial surveys were conducted to document the seasonal distribution and estimated density of sea turtles and dolphins within Core Sound and portions of Pamlico Sound, and coastal waters extending one mile offshore. Sea Surface Temperature (SST) data for each survey were extracted from 1.4 km/pixel resolution Advanced Very High Resolution Radiometer remote images. A total of 92 turtles and 1,625 dolphins were sighted during 41 aerial surveys, conducted from July 2004 to April 2006. In the spring (March – May; 7.9°C to 21.7°C mean SST), the majority of turtles sighted were along the coast, mainly from the northern Core Banks northward to Cape Hatteras. By the summer (June – Aug.; 25.2°C to 30.8°C mean SST), turtles were fairly evenly dispersed along the entire survey range of the coast and Pamlico Sound, with only a few sightings in Core Sound. In the autumn (Sept. – Nov.; 9.6°C to 29.6°C mean SST), the majority of turtles sighted were along the coast and in eastern Pamlico Sound; however, fewer turtles were observed along the coast than in the summer. No turtles were seen during the winter surveys (Dec. – Feb.; 7.6°C to 11.2°C mean SST). The estimated mean surface density of turtles was highest along the coast in the summer of 2005 (0.615 turtles/km², SE = 0.220). In Core and Pamlico Sounds the highest mean surface density occurred during the autumn of 2005 (0.016 turtles/km², SE = 0.009). The mean seasonal abundance estimates were always highest in the coastal region, except in the winter when turtles were not sighted in either region. For Pamlico Sound, surface densities were always greater in the eastern than western section. The range of mean temperatures at which turtles were sighted was 9.68°C to 30.82°C. The majority of turtles sighted were within water ≥ 11°C. Dolphins were observed within estuarine waters and along the coast year-round; however, there were some general seasonal movements. In particular, during the summer sightings decreased along the coast and dolphins were distributed throughout Core and Pamlico Sounds, while in the winter the majority of dolphins were located along the coast and in southeastern Pamlico Sound. Although relative numbers changed seasonally between these areas, the estimated mean surface density of dolphins was highest along the coast in the spring of 2006 (9.564 dolphins/km², SE = 5.571). In Core and Pamlico Sounds the highest mean surface density occurred during the autumn of 2004 (0.192 dolphins/km², SE = 0.066). The estimated mean surface density of dolphins was lowest along the coast in the summer of 2004 (0.461 dolphins/km², SE = 0.294). The estimated mean surface density of dolphins was lowest in Core and Pamlico Sounds in the summer of 2005 (0.024 dolphins/km², SE = 0.011). In Pamlico Sound, estimated surface densities were greater in the eastern section except in the autumn. Dolphins were sighted throughout the entire range of mean SST (7.60°C to 30.82°C), with a tendency towards fewer dolphins sighted as water temperatures increased. Based on the findings of this study, sea turtles are most likely to be encountered within the OPAREAs when SST is ≥ 11°C. Since sea turtle distributions are generally limited by water temperature, knowing the SST of a given area is a useful predictor of sea turtle presence. Since dolphins were observed within estuarine waters year-round and throughout the entire range of mean SST’s, they likely could be encountered in the OPAREAs any time of the year. Although our findings indicated the greatest number of dolphins to be present in the winter and the least in the summer, their movements also may be related to other factors such as the availability of prey. (PDF contains 28 pages)

User���s Guide to ADMB2R: A Set of AD Model Builder Output Routines Compatible with the R Statistics Language

ADMB2R is a collection of AD Model Builder routines for saving complex data structures into a file that can be read in the R statistics environment with a single command.1 ADMB2R provides both the means to transfer data structures significantly more complex than simple tables, and an archive mechanism to store data for future reference. We developed this software because we write and run computationally intensive numerical models in Fortran, C++, and AD Model Builder. We then analyse results with R. We desired to automate data transfer to speed diagnostics during working-group meetings. We thus developed the ADMB2R interface to write an R data object (of type list) to a plain-text file. The master list can contain any number of matrices, values, dataframes, vectors or lists, all of which can be read into R with a single call to the dget function. This allows easy transfer of structured data from compiled models to R. Having the capacity to transfer model data, metadata, and results has sharply reduced the time spent on diagnostics, and at the same time, our diagnostic capabilities have improved tremendously. The simplicity of this interface and the capabilities of R have enabled us to automate graph and table creation for formal reports. Finally, the persistent storage in files makes it easier to treat model results in analyses or meta-analyses devised months—or even years—later. We offer ADMB2R to others in the hope that they will find it useful. (PDF contains 30 pages)

User���s Guide to C2R: A Set of C Language Output Routines Compatible with the R Statistics Language

C2R is a collection of C routines for saving complex data structures into a file that can be read in the R statistics environment with a single command.1 C2R provides both the means to transfer data structures significantly more complex than simple tables, and an archive mechanism to store data for future reference. We developed this software because we write and run computationally intensive numerical models in Fortran, C++, and AD Model Builder. We then analyse results with R. We desired to automate data transfer to speed diagnostics during working-group meetings. We thus developed the C2R interface to write an R data object (of type list) to a plain-text file. The master list can contain any number of matrices, values, dataframes, vectors or lists, all of which can be read into R with a single call to the dget function. This allows easy transfer of structured data from compiled models to R. Having the capacity to transfer model data, metadata, and results has sharply reduced the time spent on diagnostics, and at the same time, our diagnostic capabilities have improved tremendously. The simplicity of this interface and the capabilities of R have enabled us to automate graph and table creation for formal reports. Finally, the persistent storage in files makes it easier to treat model results in analyses or meta-analyses devised months—or even years—later. We offer C2R to others in the hope that they will find it useful. (PDF contains 27 pages)

User���s Guide to For2R: A Module of Fortran 95 Output Routines Compatible with the R Statistics Language

For2R is a collection of Fortran routines for saving complex data structures into a file that can be read in the R statistics environment with a single command.1 For2R provides both the means to transfer data structures significantly more complex than simple tables, and an archive mechanism to store data for future reference. We developed this software because we write and run computationally intensive numerical models in Fortran, C++, and AD Model Builder. We then analyse results with R. We desired to automate data transfer to speed diagnostics during working-group meetings. We thus developed the For2R interface to write an R data object (of type list) to a plain-text file. The master list can contain any number of matrices, values, dataframes, vectors or lists, all of which can be read into R with a single call to the dget function. This allows easy transfer of structured data from compiled models to R. Having the capacity to transfer model data, metadata, and results has sharply reduced the time spent on diagnostics, and at the same time, our diagnostic capabilities have improved tremendously. The simplicity of this interface and the capabilities of R have enabled us to automate graph and table creation for formal reports. Finally, the persistent storage in files makes it easier to treat model results in analyses or meta-analyses devised months—or even years—later. We offer For2R to others in the hope that they will find it useful. (PDF contains 31 pages)

Collecção das Leis da Republica dos Estados Unidos do Brazil de 1896

Parte 1 - Atos do Poder Legislativo