Factors affecting the strength of denture repairs: Topics of interest

Fracture of dentures is a common clinical finding in daily prosthodontic practice, resulting in great inconvenience to both patient and dentist. A satisfactory repair should be cost-effective, simple to perform, and quick; it should also match the original color and not cause distortion to the existing denture. Different repair materials, surface designs, and mechanical and chemical surface treatments have been recommended in order to obtain stronger repairs. This article reviews some of the available literature with regard to the most important factors that may influence the strength of denture repairs. © 2007 by The American College of Prosthodontists.

A simplified reflectometric method for the rapid determination of dipyrone in pharmaceutical formulations

This paper describes a simple, portable and environmentally friendly method for the rapid determination of dipyrone in pharmaceuticals by using diffuse reflectance spectroscopy. The proposed method is based on the reflectance measurements of the orange compound produced from the spot test reaction between dipyrone and p-dimethylaminocinnamaldehyde (p-DAC), in acid medium, using a filter paper as solid support. Experimental design methodologies were used to optimize the measurement conditions. All reflectance measurements were carried out at 510 nm and the linear range was from 1.42 × 10-4-2.85 × 10-3 mol L-1, with a correlation coefficient of 0.999. The limit of detection (LOD) and the limit of quantification (LOQ) were 1.20 × 10-5 mol L-1 and 4.00 × 10-5 mol L-1, respectively. The intraday precision and interday precision were studied for 10 replicate analyses of 7.90 × 10-4 mol L-1 dipyrone solution. The coefficients of variation were 1.1 and 0.9%, respectively. The proposed method was applied successfully to the determination of dipyrone in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95% confidence level. ©2007 Sociedade Brasileira de Química.

Determination of atenolol in pharmaceutical formulations by diffuse reflectance spectroscopy

A simple analytical method for quantification of atenolol in pharmaceutical formulations by diffuse reflectance spectroscopy is described. The method is based on the reaction, on the filter paper surface, between the drug and p-chloranil producing a colored compound. The best reaction conditions were obtained with 20 μL of atenolol solution and 20 μL of p-chloranil. All reflectance measurements were carried out at 550 nm and the linear range was from 1.13×10-2 to 7.88×10-2 mol L-1 (r = 0.9992). The limit of detection was 2.80 × 10-3 mol L-1. The proposed method was successfully applied to analysis of different commercial brands of pharmaceutical formulations and the results obtained by the proposed method were in good agreement with those obtained using the British Pharmacopoeia method.

Fatores relacionados à adesão das drogarias e farmácias de Tatuí-SP no projeto Farmácias Notificadoras

Pharmacovigilance is accomplished by voluntary notification of suspected adverse reactions, medication errors, and deviations from quality, by users and health professionals, through the filling in of forms that are sent to a data bank. To broaden the sources of notifications, the National Health Surveillance Agency (ANVISA), in partnership with the Regional Pharmacy Council (CRF) and Center for Health Surveillance (CVS) of each state, introduced the scheme of Notifying Pharmacies. The present study was aimed at determining the factors influencing the decision of drugstores and private pharmacies in Tatuí/SP in 2007, to join this project A descriptive, observational survey of knowledge, attitude and practice (KAP) was applied to volunteer pharmacists in the town. The results showed that the professionals are awave of pharmacovigilance, (95.24%) and have attitude (95.24%). However, practice is limited (6.0%). Based on this information we concluded that the low support of the project was due to lack of time, interest and no information about the benefits to society of such activity and a lack of support from the pharmacists' organizations. This situation is expected to change with the current introduction of a professional profile, the fusion of professional bodies and the promotion of social awareness on pharmacovigilance.

América Latina y el Caribe: la propiedad intelectual después de los tratados de libre comercio

Incluye Bibliografía

Atitudes em relação à Bioestatística de discentes e docentes da Faculdade de Ciências Farmacêuticas de Araraquara-UNESP

In this study, the attitudes of students and teachers at the Faculty of Pharmaceutical Sciences of Araraquara (UNESP University) towards Biostatistics were assessed. The Survey of Attitudes Toward Statistics (SATS) scale was used as the measuring instrument. The reproducibility of the scale was estimated by Cohen's Kappa (κ) coefficient with linear weighting and its internal consistency by Cronbach's alpha coefficient (α). The individuals were first placed in two groups, according to their positive or negative attitude toward Statistics; then, the association of their attitude with the variables of interest was tested by the chi-squared (χ 2) test at a significance level of 5%. The sample consisted of 272 undergraduate students, 83 graduate students and 24 teachers, predominantly female (78.2%). Among the students, 67.5% participated in the scientific research initial training program. Reproducibility and internal consistency of the scale were adequate (κ=0.7093; α=0.9334). Most of the subjects (74.4%) had a positive attitude toward Statistics. Significant association was found between attitude and functional activity (p=0.0204), the course taken (p=0.0316) and effort (p=0.0002). Thus, it was concluded that the great majority of the participants had a positive attitude towards Biostatistics and that undergraduate students and those who reported good performance in Biostatistics showed a significantly higher proportion of positive attitude than the other students.

Non-conventional applications of computerized tomography: Analysis of solid dosage forms produced by pharmaceutical industry

X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe a non-conventional application of computerized tomography: visualization and improvements in the understanding of some internal structural features of solid dosage forms. A micro-CT X-ray scanner, with a minimum resolution of 30 μm was used to characterize some pharmaceutical tablets, granules, controlled-release osmotic tablet and liquid-filled soft-gelatin capsules. The analysis presented in this work are essentially qualitative, but quantitative parameters, such as porosity, density distribution, tablets dimensions, etc. could also be obtained using the related CT techniques. © 2010 American Institute of Physics.

The problems of intellectual property in Latin America and how to address them

Includes bibliography

Recent applications of analytical techniques for quantitative pharmaceutical analysis: A review

The intension of this paper was to review and discuss some of the current quantitative analytical procedures which are used for quality control of pharmaceutical products. The selected papers were organized according to the analytical technique employed. Several techniques like ultraviolet/visible spectrophotometry, fluorimetry, titrimetry, electroanalytical techniques, chromatographic methods (thin-layer chromatography, gas chromatography and high-performance liquid chromatography), capillary electrophoresis and vibrational spectroscopies are the main techniques that have been used for the quantitative analysis of pharmaceutical compounds. In conclusion, although simple techniques such as UV/VIS spectrophotometry and TLC are still extensively employed, HPLC is the most popular instrumental technique used for the analysis of pharmaceuticals. Besides, a review of recent works in the area of pharmaceutical analysis showed a trend in the application of techniques increasingly rapid such as ultra performance liquid chromatography and the use of sensitive and specific detectors as mass spectrometers.

A simple spectrophotometry method for the determination of tetracycline and doxycycline in pharmaceutical formulations using chloramine-T

A simple, rapid, accurate and inexpensive spectrophotometric method for the determination of tetracycline and doxycycline has been developed. The method is based on the reaction between these drugs and chloramine-T in alkaline medium producing red color products with absorbance maximum at the λ=535 and 525 nm for the tetracycline and doxycycline, respectively. The best conditions for the reactions have been found using multivariate method. Beer's law is obeyed in a concentration ranges 1. 03 x 10 -5 to 3. 61 x 10 4mol L -1 and 1. 75 x 10 -5 to 3. 48 x 10 4mol L -1 for the tetracycline and doxycycline, respectively. The quantification limits were 5. 63 x 10 -6 mol L -1 and 7. 12 x 10 -7 mol L -1 for the tetracycline and doxycycline, respectively. The proposed method was successfully applied to the determination of these drugs in pharmaceutical formulations and the results obtained were in good agreement with those obtained by the comparative method at the 95% confidence level.

Development and validation of a microbiological agar assay for determination of orbifloxacin in pharmaceutical preparations

Orbifloxacin is a fluoroquinolone with broad-spectrum antimicrobial activity, and belongs to the third generation of quinolones. Regarding the quality control of medicines, a validated microbiological assay for determination of orbifloxacin in pharmaceutical formulations has not as yet been reported. For this purpose, this paper reports the development and validation of a simple, sensitive, accurate and reproducible agar diffusion method to quantify orbifloxacin in tablet formulations. The assay is based on the inhibitory effect of orbifloxacin upon the strain of Staphylococcus aureus ATCC 25923 used as test microorganism. The results were treated statistically by analysis of variance and were found to be linear (r = 0.9992) in the selected range of 16.0-64.0 μg/mL, precise with relative standard deviation (RSD) of repeatability intraday = 2.88%, intermediate precision RSD = 3.33%, and accurate (100.31%). The results demonstrated the validity of the proposed bioassay, which allows reliable orbifloxacin quantitation in pharmaceutical samples and therefore can be used as a useful alternative methodology for the routine quality control of this medicine. © 2011 by the authors; licensee MDPI, Basel, Switzerland.

A simple and environmentally friendly reflectometric method for the rapid quantitative analysis of captopril in pharmaceutical formulations

This paper describes a simple, environmentally friendly and rapid quantitative spot test procedure for the determination of captopril (CPT) in bulk drug and in pharmaceutical formulations by using diffuse reflectance spectroscopy. The proposed method is based on the reflectance measurements of the orange compound (λ max 490 nm) produced by the spot test reaction between CPT and p-chloranil (CL). Under optimal conditions, calibration curves were obtained for CPT by plotting the optical density of the reflectance signal (A R) vs. the log of the mol L -1 concentration, from 6.91×10 -3 to 1.17×10 -1, with a good coefficient of determination (R 2 = 0.9992). The common excipients used as additives in pharmaceuticals do not interfere in the proposed method. The method was applied to determine CPT in commercial pharmaceutical formulations. The results obtained by the proposed method are compared favorably with those obtained by an official procedure at 95% confidence level. The method validation results showed that the sensitivity and selectivity of the methods were adequated for drug monitoring in industrial quality control laboratories. © 2011 Moment Publication.

N,N,N-trimethyl chitosan nanoparticles as a vitamin carrier system

There is considerable interest in incorporating stabilized vitamins into biopolymeric nanoparticles, especially in the development of carriers and active systems for pharmaceutical and food applications. Amongst biopolymer, chitosan is highly desirable owing to its good biocompatibility, biodegradability and ability to be chemically modified. In this paper, nanoparticles from three kinds of water-soluble derivative chitosan (N,N,N-trimethyl chitosan, TMC) have successfully been synthesized by ionic gelation with tripolyphosphate (TPP) anions. Combinations of concentrations of TMC and TPP have resulted in nanoparticles with varying sizes for which the capability for loading with vitamins was investigated. Zeta potential measurement and particle size analysis demonstrated that the size of the nanoparticles wasoptimized (196±8nm) when the lowest TMC and TPP amounts were used, i.e., 0.86mgmL -1 and 0.114mgmL -1 respectively. As the TMC and/or the TPP concentrations increase, the resulting size of the nanoparticles increases considerably. Three different vitamins (B9, B12 and C) were tested as additives and the final system characterized in relation to size, morphology, spectroscopic and zeta potential properties. In general, the incorporation of vitamins increased all the TMC-TPP original nanoparticle sizes, reaching a maximum diameter of 534±20nm when loaded with vitamin C. The presence of vitamins also decreases the zeta potential, with one exception observed when using vitamin C. The preliminary results of this study suggested that all TMC/TPP nanoparticles can be successfully used as a stable medium to incorporate and transport vitamins, with potential applications in foodstuffs. © 2011 Elsevier Ltd.

ANTIOXIDANT ACTIVITY OF ROSEMARY EXTRACT IN SOYBEAN OIL UNDER THERMOXIDATION

This study examined the antioxidant activity of lyophilized rosemary extract added to soybean oil, subjected to thermoxidation conditions and also its synergistic effect with the synthetic antioxidant tertiary butylhydroquinone (TBHQ). Soybean oil samples with no antioxidant added (SO), 3,000mg/kg rosemary extract (RE), 50mg/kg TBHQ (TBHQ), and a mixture of those two antioxidants (RE+TBHQ) were heated to 180C for 20h. After 0, 10 and 20h, the oxidative stability, total polar compounds, tocopherol content and fatty acid profile were determined. The addition of rosemary extract increased oxidative stability and resulted in a lower formation of total polar compounds and a higher retention of tocopherols. The RE treatment showed the highest amount of polyunsaturated fatty acids after 20h. There was not any synergy between TBHQ and rosemary extract in preventing oxidation of soybean oil. Rosemary extract showed a higher antioxidant potential when compared with TBHQ. PRACTICAL APPLICATIONS: Antioxidants are important ingredients in food processing because they have the capacity to protect foods, containing oils and fats, from damage caused by free radicals and reactive oxygen species. Synthetic antioxidants are widely used in the food industry; however, their utilization has been questioned because of toxicity. Therefore, there is a growing interest in the use of natural antioxidants to reduce or replace the synthetic antioxidants. Several species are used in cooking, medicine and by the pharmaceutical industry, standing out the rosemary. Being rich in compounds with high antioxidant activity, the rosemary extract can be used to replace synthetic antioxidants used in vegetable oils. © 2012 Wiley Periodicals, Inc.

Static and dynamic impacts of MERCOSUR: the case of the pharmaceutical sector

Includes bibliography