Caffeine ingestion and cycling power output in a low or normal muscle glycogen state

Purpose Commencing selected workouts with low muscle glycogen availability augments several markers of training adaptation compared with undertaking the same sessions with normal glycogen content. However, low glycogen availability reduces the capacity to perform high-intensity (>85% of peak aerobic power (V·O2peak)) endurance exercise. We determined whether a low dose of caffeine could partially rescue the reduction in maximal self-selected power output observed when individuals commenced high-intensity interval training with low (LOW) compared with normal (NORM) glycogen availability. Methods Twelve endurance-trained cyclists/triathletes performed four experimental trials using a double-blind Latin square design. Muscle glycogen content was manipulated via exercise–diet interventions so that two experimental trials were commenced with LOW and two with NORM muscle glycogen availability. Sixty minutes before an experimental trial, subjects ingested a capsule containing anhydrous caffeine (CAFF, 3 mg-1·kg-1 body mass) or placebo (PLBO). Instantaneous power output was measured throughout high-intensity interval training (8 × 5-min bouts at maximum self-selected intensity with 1-min recovery). Results There were significant main effects for both preexercise glycogen content and caffeine ingestion on power output. LOW reduced power output by approximately 8% compared with NORM (P < 0.01), whereas caffeine increased power output by 2.8% and 3.5% for NORM and LOW, respectively, (P < 0.01). Conclusion We conclude that caffeine enhanced power output independently of muscle glycogen concentration but could not fully restore power output to levels commensurate with that when subjects commenced exercise with normal glycogen availability. However, the reported increase in power output does provide a likely performance benefit and may provide a means to further enhance the already augmented training response observed when selected sessions are commenced with reduced muscle glycogen availability. It has long been known that endurance training induces a multitude of metabolic and morphological adaptations that improve the resistance of the trained musculature to fatigue and enhance endurance capacity and/or exercise performance (13). Accumulating evidence now suggests that many of these adaptations can be modified by nutrient availability (9–11,21). Growing evidence suggests that training with reduced muscle glycogen using a “train twice every second day” compared with a more traditional “train once daily” approach can enhance the acute training response (29) and markers representative of endurance training adaptation after short-term (3–10 wk) training interventions (8,16,30). Of note is that the superior training adaptation in these previous studies was attained despite a reduction in maximal self-selected power output (16,30). The most obvious factor underlying the reduced intensity during a second training bout is the reduction in muscle glycogen availability. However, there is also the possibility that other metabolic and/or neural factors may be responsible for the power drop-off observed when two exercise bouts are performed in close proximity. Regardless of the precise mechanism(s), there remains the intriguing possibility that the magnitude of training adaptation previously reported in the face of a reduced training intensity (Hulston et al. (16) and Yeo et al.) might be further augmented, and/or other aspects of the training stimulus better preserved, if power output was not compromised. Caffeine ingestion is a possible strategy that might “rescue” the aforementioned reduction in power output that occurs when individuals commence high-intensity interval training (HIT) with low compared with normal glycogen availability. Recent evidence suggests that, at least in endurance-based events, the maximal benefits of caffeine are seen at small to moderate (2–3 mg·kg-1 body mass (BM)) doses (for reviews, see Refs. (3,24)). Accordingly, in this study, we aimed to determine the effect of a low dose of caffeine (3 mg·kg-1 BM) on maximal self-selected power output during HIT commenced with either normal (NORM) or low (LOW) muscle glycogen availability. We hypothesized that even under conditions of low glycogen availability, caffeine would increase maximal self-selected power output and thereby partially rescue the reduction in training intensity observed when individuals commence HIT with low glycogen availability.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.

Factors influencing the impact of primary and secondary prevention strategies for cervical cancer among Queensland women

Since the introduction of the National Human Papillomavirus Vaccine Program (NHPVP) in 2007, few studies have assessed women's knowledge, beliefs and attitudes towards cervical screening and human papillomavirus (HPV) vaccination in Australia. It is imperative to ascertain this, as substantial changes are anticipated to the National Cervical Screening Program (NCSP) through a process called 'the Renewal', to ensure any changes that are introduced will be acceptable and well understood by women. The objectives of this study were to describe Queensland women's current knowledge of cervical cancer/screening and HPV, their beliefs and attitudes towards Pap smears and the HPV vaccine and seek their advice on effective methods for communicating changes to the NCSP in their communities. This research was a descriptive-exploratory study that incorporated a combination of qualitative and quantitative methods within the context of the Health Belief Model (HBM). A computer-assisted telephone interview (CATI) survey of 1002 Queensland women was conducted in Phase 1 of the study. During Phase 2 of the study, 23 focus groups were conducted throughout Queensland to gather in-depth information about women's knowledge, awareness and acceptance about cervical cancer prevention strategies. This study found high levels of awareness of HPV (over 60%) and the HPV vaccine (over 86%) amongst Queensland women. However, it also identified considerable uncertainty amongst participants about perceived susceptibility to cervical cancer, especially, the link between cervical cancer, HPV and sexual activity. Women also had limited understanding of the benefit of the Pap smear as a preventative strategy, with many women thinking the main purpose of the Pap smear was for the early detection of cancer. Despite high awareness of HPV, women participating in this study also had significant knowledge deficits about their susceptibility to HPV and the severity of HPV infection. Queensland women had high levels of awareness of the HPV vaccine, which was most commonly via the media. High acceptance of the HPV vaccine was found amongst participants although awareness of the full benefits of vaccination was not evident with little acknowledgement that the quadrivalent vaccine used in the NHPVP would also prevent genital warts. Extensive barriers to having Pap smears, including physical and psychological discomfort, were identified and the most common barriers to vaccination were concerns about side effects and a lack of information upon which to make a decision about consent. Women described enablers for screening participation, such as reminder systems and practitioner characteristics, and expressed positive views towards self collected testing as an enabler, particularly for women who did not attend screening. As this study was conducted with Queensland women it may therefore not be representative of women from other parts of Australia and as participants were more likely to report they were regular screeners than Queensland women overall, these results may not be representative of women least likely to participate in cervical screening. The use of self-reported cervical screening history may also have led to over-reporting of screening status and previous abnormalities by participants. This study reveals significant gaps in Queensland women's knowledge that require effective communication strategies to address. Recommendations from this study highlight the need for increased community education to raise awareness about primary and secondary cervical cancer prevention strategies, training of cervical screening providers in sensitive examination techniques, a reduction in costs associated with screening, the exploration of alternative service models and communication plans that incorporate methods women trust and recommend for disseminating information about changes to the NCSP. This study is the first large study to explore women's perceptions of the Pap smear and barriers to screening, their knowledge about HPV and their attitudes towards the HPV vaccine in Queensland, since the introduction of the NHPVP. It highlights considerable uncertainty about many aspects of cervical cancer and primary and secondary prevention strategies available in Australia and identified many barriers to cervical screening and concerns about HPV vaccination. These knowledge gaps and barriers need to be taken into account and addressed within the context of anticipated changes to the NCSP to ensure benefits are maximised for women in future primary and secondary cervical cancer prevention strategies in the Australian context.

"You’ve modelled and now what?" : Exploring determinants of process model re-use

Business process modelling as a practice and research field has received great attention over recent years. Organizations invest significantly into process modelling in terms of training, tools, capabilities and resources. The return on this investment is a function of process model re-use, which we define as the recurring use of process models to support organizational work tasks. While prior research has examined re-use as a design principle, we explore re-use as a behaviour, because evidence suggest that analysts’ re-use of process models is indeed limited. In this paper we develop a two-stage conceptualization of the key object-, behaviour- and socioorganization-centric factors explaining process model re-use behaviour. We propose a theoretical model and detail implications for its operationalization and measurement. Our study can provide significant benefits to our understanding of process modelling and process model use as key practices in analysis and design.

The need for legislative reform of the privity doctrine in commercial contracts in Malaysia : a comparative analysis

This thesis commences with the proposition that the first limb of the doctrine of privity causes injustice to third party beneficiaries in Malaysia, particularly in commercial contracts. The doctrine of privity has been the subject of criticism by the judiciary and academic commentators in common law jurisdictions, mainly directed at the first limb of the doctrine, whereby only parties to a contract can sue and be sued. The first limb prevents a third party from enforcing benefits conferred on them by those contracts thereby resulting in third parties suffering loss and injustice to those parties. In several common law countries, such as England, Australia, New Zealand and Singapore, legislative reform of the doctrine has occurred. The legislative reform has abrogated to a significant extent the doctrine of privity in commercial contracts. Malaysia is a common law country, where the doctrine of privity is still applied to contracts. An analysis of Malaysian case law demonstrates that the most affected third party beneficiaries are those seeking to enforce insurance and construction contracts. While a small number of other third parties to commercial contracts, such as agreements to pay for work done, sale and purchase agreements and tenancy agreements are also affected, the detriment is not as significant. As a consequence, this thesis focuses primarily on the impact of the doctrine of privity on commercial contracts in the areas of insurance and construction in Malaysia The thesis aims to recommend appropriate reforms to address the injustices arising from the privity doctrine for third parties seeking to obtain the benefit of insurance and construction contracts, which may also benefit third parties to other types of commercial contracts. While the Malaysian insurance, consumer protection, negotiable instruments and agency laws allow third party beneficiaries to enforce benefits in contracts, the rights are found to be inadequate. As not all third parties seeking to enforce an insurance or construction contract can rely upon the legislation, the injustice arising from the doctrine of privity remains and needs to be addressed. To achieve this aim, a comparative analysis of the rights of third party beneficiaries under insurance and construction contracts in Malaysia, Australia and England is undertaken. The results of the analysis are used to identify appropriate elements for a legislative framework guided by the three essential criteria for effective law reform developed in the thesis. The three criteria are certainty, public interest and justice. The thesis recommends first the enactment of general legislation applicable to all commercial contracts including insurance contracts. Secondly, the thesis recommends specific targeted legislation to address the injustice faced by third party beneficiaries in construction contracts.

The health effects of temperature : current estimates, future projections, and adaptation strategies

Climate change is expected to be one of the biggest global health threats in the 21st century. In response to changes in climate and associated extreme events, public health adaptation has become imperative. This thesis examined several key issues in this emerging research field. The thesis aimed to identify the climate-health (particularly temperature-health) relationships, then develop quantitative models that can be used to project future health impacts of climate change, and therefore help formulate adaptation strategies for dealing with climate-related health risks and reducing vulnerability. The research questions addressed by this thesis were: (1) What are the barriers to public health adaptation to climate change? What are the research priorities in this emerging field? (2) What models and frameworks can be used to project future temperature-related mortality under different climate change scenarios? (3) What is the actual burden of temperature-related mortality? What are the impacts of climate change on future burden of disease? and (4) Can we develop public health adaptation strategies to manage the health effects of temperature in response to climate change? Using a literature review, I discussed how public health organisations should implement and manage the process of planned adaptation. This review showed that public health adaptation can operate at two levels: building adaptive capacity and implementing adaptation actions. However, there are constraints and barriers to adaptation arising from uncertainty, cost, technologic limits, institutional arrangements, deficits of social capital, and individual perception of risks. The opportunities for planning and implementing public health adaptation are reliant on effective strategies to overcome likely barriers. I proposed that high priorities should be given to multidisciplinary research on the assessment of potential health effects of climate change, projections of future health impacts under different climate and socio-economic scenarios, identification of health cobenefits of climate change policies, and evaluation of cost-effective public health adaptation options. Heat-related mortality is the most direct and highly-significant potential climate change impact on human health. I thus conducted a systematic review of research and methods for projecting future heat-related mortality under different climate change scenarios. The review showed that climate change is likely to result in a substantial increase in heatrelated mortality. Projecting heat-related mortality requires understanding of historical temperature-mortality relationships, and consideration of future changes in climate, population and acclimatisation. Further research is needed to provide a stronger theoretical framework for mortality projections, including a better understanding of socioeconomic development, adaptation strategies, land-use patterns, air pollution and mortality displacement. Most previous studies were designed to examine temperature-related excess deaths or mortality risks. However, if most temperature-related deaths occur in the very elderly who had only a short life expectancy, then the burden of temperature on mortality would have less public health importance. To guide policy decisions and resource allocation, it is desirable to know the actual burden of temperature-related mortality. To achieve this, I used years of life lost to provide a new measure of health effects of temperature. I conducted a time-series analysis to estimate years of life lost associated with changes in season and temperature in Brisbane, Australia. I also projected the future temperaturerelated years of life lost attributable to climate change. This study showed that the association between temperature and years of life lost was U-shaped, with increased years of life lost on cold and hot days. The temperature-related years of life lost will worsen greatly if future climate change goes beyond a 2 °C increase and without any adaptation to higher temperatures. The excess mortality during prolonged extreme temperatures is often greater than the predicted using smoothed temperature-mortality association. This is because sustained period of extreme temperatures produce an extra effect beyond that predicted by daily temperatures. To better estimate the burden of extreme temperatures, I estimated their effects on years of life lost due to cardiovascular disease using data from Brisbane, Australia. The results showed that the association between daily mean temperature and years of life lost due to cardiovascular disease was U-shaped, with the lowest years of life lost at 24 °C (the 75th percentile of daily mean temperature in Brisbane), rising progressively as temperatures become hotter or colder. There were significant added effects of heat waves, but no added effects of cold spells. Finally, public health adaptation to hot weather is necessary and pressing. I discussed how to manage the health effects of temperature, especially with the context of climate change. Strategies to minimise the health effects of high temperatures and climate change can fall into two categories: reducing the heat exposure and managing the health effects of high temperatures. However, policy decisions need information on specific adaptations, together with their expected costs and benefits. Therefore, more research is needed to evaluate cost-effective adaptation options. In summary, this thesis adds to the large body of literature on the impacts of temperature and climate change on human health. It improves our understanding of the temperaturehealth relationship, and how this relationship will change as temperatures increase. Although the research is limited to one city, which restricts the generalisability of the findings, the methods and approaches developed in this thesis will be useful to other researchers studying temperature-health relationships and climate change impacts. The results may be helpful for decision-makers who develop public health adaptation strategies to minimise the health effects of extreme temperatures and climate change.

Bridging the gap between tertiary education and work : situated learning in accountancy

In professions such as teaching, health sciences (medicine, nursing), and built environment, significant work-based learning through practica is an essential element before graduation. However, there is no such requirement in professional accounting education. This paper reports the findings of an exploratory qualitative case study of the implementation of a Workplace Learning Experience Program in Accountancy at the Queensland University of Technology (QUT) in Australia. The interview-based study documents the responses of university students and graduates to this program. The study demonstrates that a 100 hour work placement in Accountancy can enhance student learning. It highlights the potential value of the application of sociocultural theories of learning, especially the concept of situated learning involving legitimate peripheral participation (Lave and Wenger 1991). This research adds to a small body of empirical accounting education literature relating to the benefits of work placements prior to graduation. The effectiveness of this short, for credit, unpaid program should encourage other universities to implement a similar work placement program as a form of pre-graduation learning in professional accounting education.

Development, implementation and evaluation of a cancer survivor self-management care plan

Aim There is a growing population of people with cancer who experience physiological and psychological effects that persist long after treatment is complete. Interventions that enhance survivors’ self-management abilities might help offset these effects. The aim of this pilot study was to develop, implement and evaluate interventions tailored to assist patients to manage post-treatment health issues effectively. Method In this pre-post intervention cohort study, participants were recruited on completion of cancer treatment. Participants recruited preimplementation, who received usual care, comprised the control group. Participants recruited later formed the intervention group. In the intervention group, the Cancer Care Coordinator developed an individualised, structured Cancer Survivor Self-management Care Plan. Participants were interviewed on completion of treatment (baseline) and at three months. Assessments concerned health needs (CaSUN), self-efficacy in adjusting and coping with cancer and health-related quality of life (FACIT-B or FACT-C). The impact of the intervention was determined by independent t-tests of change scores. Results The intervention (n = 32) and control groups (n = 35) were comparable on demographic and clinical characteristics. Sample mean age was 54 + 10 years. Cancer diagnoses were breast (82%) and colorectal (18%). Statistically significant differences (p < 0.05) indicated improvement in the intervention group for: (a) functional well-being, from the FACIT, (Control: M = −0.69, SE = 0.91; Intervention: M = 3.04, SE = 1.13); and (b) self-efficacy in maintaining social relationships, (Control: M = −0.333, SE = 0.33; Intervention: M = 0.621, SE = 0.27). No significant differences were found in health needs, other subscales of quality of life, the extent and number of strategies used in coping and adjusting to cancer and in other domains of self-efficacy. Conclusions While the results should be interpreted with caution, due to the non-randomised nature of the study and the small sample size, they indicate the potential benefits of tailored self-management interventions warrant further investigation in this context.

End-of-life care pathways for improving outcomes in caring for the dying (Review)

Background This is an updated version of a Cochrane review first published in Issue 1, 2010 of The Cochrane Library. In many clinical areas, integrated care pathways are utilised as structured multidisciplinary care plans that detail essential steps in caring for patients with specific clinical problems. In particular, care pathways for the dying have been developed as a model to improve care of patients who are in the last days of life. The care pathways were designed with an aim of ensuring that the most appropriate management occurs at the most appropriate time and that it is provided by the most appropriate health professional. There have been sustained concerns about the safety of implementing end-of-life care pathways, particularly in the UK. Therefore, there is a significant need for clinicians and policy makers to be informed about the effects of end-of-life care pathways with a systematic review. Objectives To assess the effects of end-of-life care pathways, compared with usual care (no pathway) or with care guided by another end-of-life care pathway across all healthcare settings (e.g. hospitals, residential aged care facilities, community). In particular, we aimed to assess the effects on symptom severity and quality of life of people who are dying; those related to the care such as families, carers and health professionals; or a combination of these. Search Methods We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (Issue 6, 2013), MEDLINE, EMBASE, PsycINFO, CINAHL, review articles and reference lists of relevant articles.We conducted the original search in September 2009, and the updated search in June 2013. Selection Criteria All randomised controlled trials (RCTs), quasi-randomised trial or high-quality controlled before-and-after studies comparing use versus non-use of an end-of-life care pathway in caring for the dying. Data Collection and Analysis Two review authors assessed the results of the searches against the predetermined criteria for inclusion. Main Results The original review identified 920 titles. The updated search found 2042 potentially relevant titles (including the original 920), but no additional studies met criteria for inclusion in the review update. Authors’ Conclusions With sustained concerns about the safety of the pathway implementation and the lack of available evidence on important patient and relative outcomes, recommendations for the use of end-of-life pathways in caring for the dying cannot be made. Since the last version of this review, no new studies met criteria for inclusion in the review update. With recently documented concerns related to the potential adverse effects associated with Liverpool Care Pathway (the most commonly used end-of-life care pathway), we do not recommend decision making based on indirect or low-quality evidence. All health services using end-of-life care pathways are encouraged to have their use of the pathway, to date, independently audited. Any subsequent use should be based on carefully documented evaluations. Large RCTs or other well-designed controlled studies are urgently required for the evaluation of the use of end-of-life care pathways in caring for dying people in various clinical settings. In future studies, outcome measures should include benefits or harms concerning the outcomes of interest in this review in relation to patients, families, carers and health professionals.

Condition monitoring and operational decision making in semiconductor manufacturing

Today, the majority of semiconductor fabrication plants (fabs) conduct equipment preventive maintenance based on statistically-derived time- or wafer-count-based intervals. While these practices have had relative success in managing equipment availability and product yield, the cost, both in time and materials, remains high. Condition-based maintenance has been successfully adopted in several industries, where costs associated with equipment downtime range from potential loss of life to unacceptable affects to companies’ bottom lines. In this paper, we present a method for the monitoring of complex systems in the presence of multiple operating regimes. In addition, the new representation of degradation processes will be used to define an optimization procedure that facilitates concurrent maintenance and operational decision-making in a manufacturing system. This decision-making procedure metaheuristically maximizes a customizable cost function that reflects the benefits of production uptime, and the losses incurred due to deficient quality and downtime. The new degradation monitoring method is illustrated through the monitoring of a deposition tool operating over a prolonged period of time in a major fab, while the operational decision-making is demonstrated using simulated operation of a generic cluster tool.

Ten basic factors to identify suitable subcontractors for construction projects

With unpredictable workloads and a need for a multitude of specialized skills, many main contractors rely heavily on subcontracting to reduce their risks (Bresnen et al., 1985; Beardsworth et al., 1988). This is especially the case In Hong Kong, where the average direct labour content accounts for only around 1% of the total contract sum (Lai, 1987). Extensive usage of subcontracting is also reported in many other countries, including the UK (Gray and Flanagan, 1989) and Japan (Bennett et al., 1987). In addition, and depending upon the scale and complexity of works, it is not uncommon for subcontractors to further sublet their works to lower tier(s) subcontractors. Richter and Mitchell (1982) argued that main contractors can obtain a higher profit margin by reducing their performance costs by subcontracting work to those who have the necessary resources to perform the work more efficiently and economically. Subcontracting is also used strategically to allow firms to employ a minimum work force under fluctuating demand (Usdiken and Sözen, 1985). Through subcontracting, the risks of main contractors are also reduced, as errors in estimating or additional costs caused by delays or extra labour requirements can be absorbed by the subcontractors involved (Woon and Ofori, 2000). Despite these benefits, the quality of work can suffer when incapable or inexperienced subcontractors are employed. Additional problems also exist in the form of bid shopping, unclear accountability, and high fragmentation (Palaneeswaran et al., 2002). A recent CIB TG 23 International Conference, October 2003, Hong Kong report produced by the Hong Kong Construction Industry Review Committee (CIRC) points to development of a framework to help distinguish between capable and incapable subcontractors (Tang, 2001). This paper describes research aims at identifying and prioritising criteria for use in such a framework.

Growing biodiverse carbon-rich forests

Regrowing forests on cleared land is a key strategy to achieve both biodiversity conservation and climate change mitigation globally. Maximizing these co-benefits, however, remains theoretically and technically challenging because of the complex relationship between carbon sequestration and biodiversity in forests, the strong influence of climate variability and landscape position on forest development, the large number of restoration strategies possible, and long time-frames needed to declare success. Through the synthesis of three decades of knowledge on forest dynamics and plant functional traits combined with decision science, we demonstrate that we cannot always maximize carbon sequestration by simply increasing the functional trait diversity of trees planted. The relationships between plant functional diversity, carbon sequestration rates above-ground and in the soil are dependent on climate and landscape positions. We show how to manage ‘identities’ and ‘complementarities’ between plant functional traits in order to achieve systematically maximal co-benefits in various climate and landscape contexts. We provide examples of optimal planting and thinning rules that satisfy this ecological strategy and guide the restoration of forests that are rich in both carbon and plant functional diversity. Our framework provides the first mechanistic approach for generating decision-making rules that can be used to manage forests for multiple objectives, and supports joined carbon credit and biodiversity conservation initiatives, such as Reducing Emissions from Deforestation and forest Degradation REDD+. The decision framework can also be linked to species distribution models and socio-economic models in order to find restoration solutions that maximize simultaneously biodiversity, carbon stocks and other ecosystem services across landscapes. Our study provides the foundation for developing and testing cost-effective and adaptable forest management rules to achieve biodiversity, carbon sequestration and other socio-economic co-benefits under global change.

Cross-sectional survey of the health behaviour of southeast Queensland women with cancer-treatment induced menopause : Implications for cancer and primary care nurses

Purpose Women who experience cancer treatment-induced menopause are at risk of long-term chronic morbidity. This risk can be prevented or offset with adherence to health promotion and risk reduction guidelines. The purpose of this study was to explore health behaviours in younger female survivors of cancer and the variables (quality of life and psychological distress) believed to moderate health behaviours. Design Cross-sectional survey of a convenience sample of women (n = 85) in southeast Queensland. Methods Health behaviour and health status were elicited with items from the Australian Health Survey and the Behavioural Risk Factor Surveillance System. The WHO Quality of Life (Brief) measured participants’ self-reported quality of life and their satisfaction with their health. The Brief Symptom Inventory-18 measured psychological distress. Findings Higher self-reported health status was associated with regular exercise and better quality of life. However, a substantial proportion of participants did not engage in the physical activity, dietary or cervical screening practices recommended by Australian guidelines. Conclusions The participants require education regarding the benefits of diet, exercise, weight loss and decreased alcohol intake, as well as information on future health risks and possible comorbidities. These education sessions could be addressed by a nurse-led health promotion model of care at the time of discharge or in the community.

A vibrational spectroscopic study of the arsenate mineral bayldonite (Cu,Zn)3Pb(AsO3OH)2(OH)2 : a comparison with other basic arsenates

We have studied the vibrational spectra of the mineral bayldonite, a hydroxy arsenate of copper and lead of formula Cu3Pb(AsO3OH)2(OH)2 from the type locality, the Penberthy Croft Mine, St Hilary, Mount's Bay District, Cornwall, England.and relate the spectra to the mineral structure. Raman bands at 896 and 838 cm-1are assigned to the (AsO4)3- ν1 symmetric stretching mode and the second to the (AsO4)3- ν3 antisymmetric stretching mode. It is noted that the position of the symmetric stretching mode is at a higher position than the antisymmetric stretching mode. It is proposed that the Raman bands at 889 and 845 cm-1 are symmetric and antisymmetric stretching modes of the (HOAsO3)2- units. Raman bands of bayldonite at 490 and 500 cm-1 are assigned to the (AsO4)3- ν4 bending modes. Raman bands for bayldonite are noted at 396, 408 and 429 cm-1 and are assigned to the (AsO4)3- ν2 bending modes. A comparison is made with spectra of the other basic copper arsenate minerals, namely cornubite, olivenite, cornwallite.