Toxic effects of brake wear particles on epithelial lung cells in vitro

ABSTRACT: BACKGROUND: Fine particulate matter originating from traffic correlates with increased morbidity and mortality. An important source of traffic particles is brake wear of cars which contributes up to 20% of the total traffic emissions. The aim of this study was to evaluate potential toxicological effects of human epithelial lung cells exposed to freshly generated brake wear particles. RESULTS: An exposure box was mounted around a car's braking system. Lung cells cultured at the air-liquid interface were then exposed to particles emitted from two typical braking behaviours ("full stop" and "normal deceleration"). The particle size distribution as well as the brake emission components like metals and carbons was measured on-line, and the particles deposited on grids for transmission electron microscopy were counted. The tight junction arrangement was observed by laser scanning microscopy. Cellular responses were assessed by measurement of lactate dehydrogenase (cytotoxicity), by investigating the production of reactive oxidative species and the release of the pro-inflammatory mediator interleukin-8. The tight junction protein occludin density decreased significantly (p < 0.05) with increasing concentrations of metals on the particles (iron, copper and manganese, which were all strongly correlated with each other). Occludin was also negatively correlated with the intensity of reactive oxidative species. The concentrations of interleukin-8 were significantly correlated with increasing organic carbon concentrations. No correlation was observed between occludin and interleukin-8, nor between reactive oxidative species and interleukin-8. CONCLUSION: These findings suggest that the metals on brake wear particles damage tight junctions with a mechanism involving oxidative stress. Brake wear particles also increase pro-inflammatory responses. However, this might be due to another mechanism than via oxidative stress.

First foot prints of chemistry on the shore of the Island of Superheavy Elements

Chemistry has arrived on the shore of the Island of Stability with the first chemical investigation of the superheavy elements Cn, 113, and 114. The results of three experimental series leading to first measured thermodynamic data and qualitatively evaluated chemical properties for these elements are described. An interesting volatile compound class has been observed in the on-line experiments for the elements Bi and Po. Hence, an exciting chemical study of their heavier transactinide homologues, elements 115 and 116 is suggested.

Pupillometry: the eyes shed fresh light on the mind

Recent studies provide promising methodological advances in the use of pupillometry as on-line measurement of cognitive processes and show that visual attention allocation, mind-wandering, mental imagery, and even rhyme expectations can influence the size of the human pupil.

Particle Accelerators and Detectors for medical Diagnostics and Therapy

This Habilitationsschrift (Habilitation thesis) is focused on my research activities on medical applications of particle physics and was written in 2013 to obtain the Venia Docendi (Habilitation) in experimental physics at the University of Bern. It is based on selected publications, which represented at that time my major scientific contributions as an experimental physicist to the field of particle accelerators and detectors applied to medical diagnostics and therapy. The thesis is structured in two parts. In Part I, Chapter 1 presents an introduction to accelerators and detectors applied to medicine, with particular focus on cancer hadrontherapy and on the production of radioactive isotopes. In Chapter 2, my publications on medical particle accelerators are introduced and put into their perspective. In particular, high frequency linear accelerators for hadrontherapy are discussed together with the new Bern cyclotron laboratory. Chapter 3 is dedicated to particle detectors with particular emphasis on three instruments I contributed to propose and develop: segmented ionization chambers for hadrontherapy, a proton radiography apparatus with nuclear emulsion films, and a beam monitor detector for ion beams based on doped silica fibres. Selected research and review papers are contained in Part II. For copyright reasons, they are only listed and not reprinted in this on-line version. They are available on the websites of the journals.

The Comprehensive Assessment of Leadership for Learning: A Next Generation Formative Evaluation and Feedback System

Recent developments in federal policy have prompted the creation of state evaluation frameworks for principals and teachers that hold educators accountable for effective practices and student outcomes. These changes have created a demand for formative evaluation instruments that reflect current accountability pressures and can be used by schools to focus school improvement and leadership development efforts. The Comprehensive Assessment of Leadership for Learning (CALL) is a next generation, 360-degree on-line assessment and feedback system that reflect best practices in feedback design. Some unique characteristics of CALL include a focus on: leadership distributed throughout the school rather than as carried out by an individual leader; assessment of leadership tasks rather than perceptions of leadership practice; a focus on larger complex systems of middle and high school; and transparency of assessment design. This paper describes research contributing to the design and validation of the CALL survey instrument.

Study on the response of IFMIF fission chambers to mixed neutron-gamma fields: PH-2 experimental tests

The engineering design of fissionchambers as on-line radiation detectors for IFMIF is being performed in the framework of the IFMIF-EVEDA works. In this paper the results of the experiments performed in the BR2 reactor during the phase-2 of the foreseen validation activities are addressed. Two detectors have been tested in a mixedneutron-gamma field with high neutron fluence and gamma absorbed dose rates, comparable with the expected values in the HFTM in IFMIF. Since the neutron spectra in all BR2 channels are dominated by the thermal neutron component, the detectors have been surrounded by a cylindrical gadolinium screen to cut the thermal neutron component, in order to get a more representative test for IFMIF conditions. The integrated gamma absorbed dose was about 4 × 1010 Gy and the fast neutron fluence (E > 0.1 MeV) 4 × 1020 n/cm2. The fissionchambers were calibrated in three BR2 channels with different neutron-to-gamma ratio, and the long-term evolution of the signals was studied and compared with theoretical calculations

Desarrollo de una aplicación software para laboratorios remotos

Las prácticas en laboratorios forman una parte muy importante de la formación en todos los programas docentes. A pesar de esta importancia, la creación de un laboratorio no es una tarea fácil, ya que el hecho de equipar un laboratorio puede suponer un gran gasto económico, tanto inicial como posterior. Como solución, surge la educación a distancia, y en concreto los laboratorios virtuales, es decir, simulaciones de un laboratorio real utilizando modelos matemáticos. Por sus características y flexibilidad se han ido desarrollando laboratorios virtuales en el ámbito docente, pero no todas las áreas cuentan con tantas posibilidades o facilidades como en la electrónica. La mayoría de los laboratorios accesibles desde Internet que hay en la actualidad dentro de la enseñanza a distancia o formación online, son virtuales. El laboratorio que se ha desarrollado tiene como principal ventaja la realización de prácticas controlando instrumentos y circuitos reales de forma remota. El proyecto consiste en realizar un sistema software para implementar un laboratorio remoto en el área de la electrónica analógica, que pueda ser utilizado como complemento a las actividades formativas que se realizan en los laboratorios de los centros de enseñanza. El sistema completo también consta de un hardware controlado mediante buses de comunicación estándar, que permite la implementación de distintos circuitos analógicos, de tal forma que se pueda realizar prácticas sobre circuitos físicos reales. Para desarrollar un laboratorio lo más real posible, la aplicación que maneja el estudiante es un visor 3D. Con la utilización de un visor 3D lo que se pretende es tener un aumento de la realidad a la hora de realizar las prácticas de laboratorio remotamente. El sistema desarrollado cuenta con un sistema de comunicación basado en un modelo cliente-servidor: • Servidor: se encarga de procesar las acciones que realiza el cliente y controla y monitoriza los instrumentos y dispositivos del sistema hardware. • Cliente: sería el usuario final, que mediante un visor 3D comunica las acciones a realizar al servidor para que éste las procese. Practices in laboratories are a very important part of training in all educational programs. Despite this importance, the establishment of a laboratory is not an easy task, since the fact of equipping a laboratory can be a great economic budget, both initial and subsequent spending. As a solution, appears the education at distance (online), and in particular the virtual labs, namely simulations of a real laboratory by using mathematical models. Virtual laboratories in the field of teaching have been developed for its features and flexibility, but not all areas have so many possibilities or facilities as in electronics. The most accessible laboratories from the Internet that are currently accessible within the distance or e-learning (on-line) are virtual. The laboratory which has been developed has as a main advantage to make practices or exercises in the fact of controlling instruments and real circuits remotely. The project consists of making a software system in order to implement a remote laboratory in the area of analog electronics that can be used as a complement to the others training activities to be carried out. The complete system also consists of a controlled hardware by standard communication buses that allow the implementation of several analog circuits, in such a way that practices can control real physical circuits. To develop a laboratory as more realistic as possible, the application that manages the student is a 3D viewer. With the use of a 3D viewer, is intended to have an increase in reality when any student wants to access to laboratory practices remotely. The developed system has a communication system based on a model Client/Server: • Server: The system that handles actions provided by the client and controls and monitors the instruments and devices in the hardware system. • Client: The end user, which using a 3D viewer, communicates the actions to be performed at the server so that it will process them.

Adaptive control system based on lineal control theory for the path-following problem of a car-like mobile robot

The objective of this paper is to design a path following control system for a car-like mobile robot using classical linear control techniques, so that it adapts on-line to varying conditions during the trajectory following task. The main advantages of the proposed control structure is that well known linear control theory can be applied in calculating the PID controllers to full control requirements, while at the same time it is exible to be applied in non-linear changing conditions of the path following task. For this purpose the Frenet frame kinematic model of the robot is linearised at a varying working point that is calculated as a function of the actual velocity, the path curvature and kinematic parameters of the robot, yielding a transfer function that varies during the trajectory. The proposed controller is formed by a combination of an adaptive PID and a feed-forward controller, which varies accordingly with the working conditions and compensates the non-linearity of the system. The good features and exibility of the proposed control structure have been demonstrated through realistic simulations that include both kinematics and dynamics of the car-like robot.

Lateral impact sensor for measuring firmness of fruits in an experimental packing line.

Different parameters are used to quantify the maturity of fruits at or near harvest (shape, color, flesh texture and internal composition). Flesh firmness is a critical handling parameter for fruits such as peach, pear and apple. Results of previous studies conducted by different researchers have shown that impact techniques can be used to evaluate firmness of fruits. A prototype impact system for firmness sorting of fruits was developed by Chen and Ruiz-Altisent (Chen et al, 1996). This sensor was mounted and tested successfully on a 3 m section of a commercial conveyor belt (Chen et al, 1998). This is a further development of the on-line impact system for firmness sorting of fruits. The design of the sensor has been improved and it has been mounted on a experimental fruit packing line (Ortiz-Cañavate et al 1999).

Energy Management and Optimization for Video Decoders based on Functional-oriented Reconfiguration

In recent years, the increasing sophistication of embedded multimedia systems and wireless communication technologies has promoted a widespread utilization of video streaming applications. It has been reported in 2013 that youngsters, aged between 13 and 24, spend around 16.7 hours a week watching online video through social media, business websites, and video streaming sites. Video applications have already been blended into people daily life. Traditionally, video streaming research has focused on performance improvement, namely throughput increase and response time reduction. However, most mobile devices are battery-powered, a technology that grows at a much slower pace than either multimedia or hardware developments. Since battery developments cannot satisfy expanding power demand of mobile devices, research interests on video applications technology has attracted more attention to achieve energy-efficient designs. How to efficiently use the limited battery energy budget becomes a major research challenge. In addition, next generation video standards impel to diversification and personalization. Therefore, it is desirable to have mechanisms to implement energy optimizations with greater flexibility and scalability. In this context, the main goal of this dissertation is to find an energy management and optimization mechanism to reduce the energy consumption of video decoders based on the idea of functional-oriented reconfiguration. System battery life is prolonged as the result of a trade-off between energy consumption and video quality. Functional-oriented reconfiguration takes advantage of the similarities among standards to build video decoders reconnecting existing functional units. If a feedback channel from the decoder to the encoder is available, the former can signal the latter changes in either the encoding parameters or the encoding algorithms for energy-saving adaption. The proposed energy optimization and management mechanism is carried out at the decoder end. This mechanism consists of an energy-aware manager, implemented as an additional block of the reconfiguration engine, an energy estimator, integrated into the decoder, and, if available, a feedback channel connected to the encoder end. The energy-aware manager checks the battery level, selects the new decoder description and signals to build a new decoder to the reconfiguration engine. It is worth noting that the analysis of the energy consumption is fundamental for the success of the energy management and optimization mechanism. In this thesis, an energy estimation method driven by platform event monitoring is proposed. In addition, an event filter is suggested to automate the selection of the most appropriate events that affect the energy consumption. At last, a detailed study on the influence of the training data on the model accuracy is presented. The modeling methodology of the energy estimator has been evaluated on different underlying platforms, single-core and multi-core, with different characteristics of workload. All the results show a good accuracy and low on-line computation overhead. The required modifications on the reconfiguration engine to implement the energy-aware manager have been assessed under different scenarios. The results indicate a possibility to lengthen the battery lifetime of the system in two different use-cases.

Standing together for reproducibility in large-scale computing: report on reproducibility@XSEDE

This is the final report on reproducibility@xsede, a one-day workshop held in conjunction with XSEDE14, the annual conference of the Extreme Science and Engineering Discovery Environment (XSEDE). The workshop's discussion-oriented agenda focused on reproducibility in large-scale computational research. Two important themes capture the spirit of the workshop submissions and discussions: (1) organizational stakeholders, especially supercomputer centers, are in a unique position to promote, enable, and support reproducible research; and (2) individual researchers should conduct each experiment as though someone will replicate that experiment. Participants documented numerous issues, questions, technologies, practices, and potentially promising initiatives emerging from the discussion, but also highlighted four areas of particular interest to XSEDE: (1) documentation and training that promotes reproducible research; (2) system-level tools that provide build- and run-time information at the level of the individual job; (3) the need to model best practices in research collaborations involving XSEDE staff; and (4) continued work on gateways and related technologies. In addition, an intriguing question emerged from the day's interactions: would there be value in establishing an annual award for excellence in reproducible research? Overview

Cartografía local y sistemas de información geográfica participativos como herramientas de consolidación de la identidad local en la planificación urbana y territorial

Una de las características de la cartografía y SIG Participativos (SIGP) es incluir en sus métodos a la sociedad civil para aportar contenidos cualitativos a la información de sus territorios. Sin embargo no sólo se trata de datos, sino de los efectos que pueden tener estas prácticas sobre el territorio y su sociedad. El acceso a esa información se ve reducida en contraste con el incremento de información difundida a través de servicios de visualización, geoinformación y cartografía on-line. Todo esto hace que sea necesario el análisis del alcance real de las metodologías participativas en el uso de Información Geográfica (IG) y la comparación desde distintos contextos geográficos. También es importante conocer los beneficios e inconvenientes del acceso a la información para el planeamiento; desde la visibilidad de muchos pueblos desapercibidos en zonas rurales y periféricas, hasta la influencia en programas de gobierno sobre la gestión del territorio pasando por el conocimiento local espacial. El análisis se centró en los niveles de participación de la sociedad civil y sus grados de accesibilidad a la información (acceso y uso), dentro del estudio de los SIGP, Participatory Mapping, además se estudió de los TIG (Tecnologías de Información Geográfica), cartografías on-line (geoweb) y plataformas de geovisualización espacial, como recursos de Neocartografía. En este sentido, se realizó un trabajo de campo de cartografía participativa en Bolivia, se evaluaron distintos proyectos SIGP en países del norte y sur (comparativa de contextos en países en desarrollo) y se analizaron los resultados del cruce de las distintas variables.(validación, accesibilidad, verificación de datos, valor en la planificación e identidad) La tesis considera que ambos factores (niveles de participación y grado de accesibilidad) afectan a la (i) validación, verificación y calidad de los datos, la (ii) valor analítico en la planificación, y al (iii) modelo de identidad de un lugar, y que al ser tratados de forma integral, constituyen el valor añadido que los SIGP pueden aportar para lograr una planificación efectiva. Asimismo se comprueba, que la dimensión participativa en los SIGP varía según el contexto, la centralización de sus actores e intereses sectoriales. La información resultante de las prácticas SIGP tiende a estar restringida por la falta de legislaciones y por la ausencia de formatos estándar, que limitan la difusión e intercambio de la información. Todo esto repercute en la efectividad de una planificación estratégica y en la viabilidad de la implementación de cualquier proyecto sobre el territorio, y en consecuencia sobre los niveles de desarrollo de un país. Se confirma la hipótesis de que todos los elementos citados en los SIGP y mapeo participativo actuarán como herramientas válidas para el fortalecimiento y la eficacia en la planificación sólo si están interconectadas y vinculadas entre sí. Se plantea una propuesta metodológica ante las formas convencionales de planificación (nueva ruta del planeamiento; que incluye el intercambio de recursos y determinación participativa local antes de establecer la implementación), con ello, se logra incorporar los beneficios de las metodologías participativas en el manejo de la IG y los SIG (Sistemas de Información Geográfica) como instrumentos estratégicos para el desarrollo de la identidad local y la optimización en los procesos de planeamiento y estudios del territorio. Por último, se fomenta que en futuras líneas de trabajo los mapas de los SIGP y la cartografía participativa puedan llegar a ser instrumentos visuales representativos que transfieran valores identitarios del territorio y de su sociedad, y de esta manera, ayudar a alcanzar un mayor conocimiento, reconocimiento y valoración de los territorios para sus habitantes y sus planificadores. ABSTRACT A feature of participatory mapping and PGIS is to include the participation of the civil society, to provide qualitative information of their territories. However, focus is not only data, but also the effects that such practices themselves may have on the territory and their society. Access to this information is reduced in contrast to the increase of information disseminated through visualization services, geoinformation, and online cartography. Thus, the analysis of the real scope of participatory methodologies in the use of Geographic Information (GI) is necessary, including the comparison of different geographical contexts. It is also important to know the benefits and disadvantages of access to information needed for planning in different contexts, ranging from unnoticed rural areas and suburbs to influence on government programs on land management through local spatial knowledge. The analysis focused on the participation levels of civil society and the degrees of accessibility of the information (access and use) within the study of Participatory GIS (PGIS). In addition, this work studies GIT (Geographic Information Technologies), online cartographies (Geoweb) and platforms of spatial geovisualization, as resources of Neocartography. A participatory cartographic fieldwork was carried out in Bolivia. Several PGIS projects were evaluated in Northern and Southern countries (comparatively with the context of developing countries), and the results were analyzed for each these different variables. (validation, accessibility, verification,value, identity). The thesis considers that both factors (participation levels and degree of accessibility) affect the (i) validation, verification and quality of the data, (ii) analytical value for planning, and (iii) the identity of a place. The integrated management of all the above cited criteria constitutes an added value that PGISs can contribute to reach an effective planning. Also, it confirms the participatory dimension of PGISs varies according to the context, the centralization of its actors, and to sectorial interests. The resulting information from PGIS practices tends to be restricted by the lack of legislation and by the absence of standard formats, which limits in turn the diffusion and exchange of the information. All of this has repercussions in the effectiveness of a strategic planning and in the viability of the implementation of projects about the territory, and consequentially in the land development levels. The hypothesis is confirmed since all the described elements in PGISs and participatory mapping will act as valid tools in strengthening and improving the effectivity in planning only if they are interconnected and linked amongst themselves. This work, therefore, suggests a methodological proposal when faced with the conventional ways of planning: a new planning route which includes the resources exchange and local participatory determination before any plan is established -. With this, the benefits of participatory methodologies in the management of GI and GIS (Geographic Information Systems) is incorporated as a strategic instrument for development of local identity and optimization in planning processes and territory studies. Finally, the study outlines future work on PGIS maps and Participatory Mapping, such that these could eventually evolve into visual representative instruments that transfer identity values of the territory and its society. In this way, they would contribute to attain a better knowledge, recognition, and appraisement of the territories for their inhabitants and planners.

COMUNICAÇÃO EM LINHA E RUÍDOS SEMÂNTICOS NA RECUPERAÇÃO DE INFORMAÇÕES EM PESQUISAS CIENTÍFICAS

O pesquisador científico necessita de informações precisas, em tempo hábil para conclusão de seus trabalhos. Com o advento da INTERNET, o processo de comunicação em linha, homem x máquina, mediado pelos mecanismos de busca, tornou-se, simultaneamente, um auxílio e uma dificuldade no processo de recuperação de informações. O pesquisador teve que adaptar-se ao modo de operar da INTERNET e incluiu conhecimentos de diferenças idiomáticas, de terminologia, além de utilizar instrumentos que lhe forneçam parâmetros para obter maior pertinência e relevância nos dados. O uso de agentes inteligentes para melhoria de resultados e a diminuição de ruídos semânticos têm sido apontados como soluções para aumento da precisão no resultado das buscas. O estudo de casos exploratório realizado analisa a pesquisa em linha a partir da teoria da informação e propõe duas formas de otimizar o processo comunicacional com vistas à pertinência e relevância dos dados obtidos: a primeira sugere a aplicação de algoritmos que utilizem o vocabulário controlado como mediador do processo de comunicação utilizando-se dos descritores para recuperação em linha. , e a segunda ressalta a importância dos agentes inteligentes no processo de comunicação homem-máquina.(AU)