Occurrence of skeletal malocclusions in Brazilian patients with dentofacial deformities

Este estudo avaliou a ocorrência de más oclusões esqueléticas apresentadas pelos pacientes do Centro de Pesquisa e Tratamento das Deformidades Bucofaciais (CEDEFACE), na cidade de Araraquara, SP, Brasil. Foram avaliados prontuários de 381 pacientes com deformidades dentoesqueléticas, que fizeram tratamento combinado ortodôntico-cirúrgico no período entre 2000 e 2006. Após a seleção da amostra (método de conveniência), baseado nos dados da documentação pré e pós-cirúrgica, o número de pacientes foi reduzido para 171. Para classificação do levantamento, considerou-se a discrepância ântero-posterior (Classe I, II e III), raça, idade, gênero, ausência ou presença de assimetria, excesso vertical maxilar e biprotrusão maxilar, além de determinar em qual base óssea o procedimento cirúrgico foi realizado. As documentações dos pacientes foram analisadas por um examinador previamente calibrado pelo processo de repetição até que o método fosse considerado adequado (correlação intraclasse >0,94). A idade média dos pacientes foi de 23,59 anos (DP 6,93), a maioria do gênero feminino (102 pacientes) e leucoderma (160 pacientes). A má oclusão mais prevalente foi a Classe III (81 pacientes). A assimetria, o excesso maxilar vertical e biprotrusão maxilar estavam presentes em 54, 33, e 7 pacientes, respectivamente. Na maioria dos casos, as cirurgias para correção de deformidades dentoesqueléticas foram combinadas, envolvendo os dois maxilares. Com base nos resultados, conclui-se que a Classe III foi a deformidade esquelética mais prevalente e a Classe I a menos prevalente. em geral, a prevalência de deformidades esqueléticas foi maior entre as mulheres e a maioria dos pacientes apresentou uma combinação de problemas maxilares e mandibulares, o que interfere diretamente na decisão sobre o plano de tratamento mais adequado. Houve uma maior incidência de assimetria na Classe III esquelética; o excesso vertical ocorreu de forma semelhante na Classe II e III e a biprotrusão teve baixa incidência entre as más oclusões avaliadas.

Periodontal disease characterization in dogs with normal renal function or chronic renal failure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the length of the mouthparts of Africanized, Caucasian and Africanized/Caucasian honey bee crosses, and relationships between glossa sizeand food gathering behavior

Os comprimentos das peças que constituem o aparelho bucal, glossa, paraglossa, estipite, gálea, palpo labial, palpo maxilar, cardo, lorum, mento e pré-mento foram estudados a nível unidimensional em abelhas caucasianas, africanizadas e nos descendentes F1. Somente a paraglossa, estipite, gálea, palpo maxilar, mento e pré-mento mostraram ser diferentes entre esses 2 tipos de abelhas. Essas 6 variáveis foram estudadas nos descendentes F1, tendo sido utilizados 2 tipos de cruzamentos: rainhas caucasianas x machos africanizados (cruzamento 1) e rainhas africanizadas x machos caucasianos (cruzamento 2). Análises multidimensionais também foram realizadas, tendo sido obtidas as distâncias generalizadas de Mahalanobis (D2) entre os parentais e os descendentes F1. Tanto nas análises unidimensionais como nas multidimensionais houve aparente dominância das abelhas africanizadas, mas o número de genes não pôde ser conhecido porque só havia a geração F1 e não houve controle da heterozigosidade das 2 colônias parentais. Os cálculos dos coeficientes de correlações de Spearman mostraram que as abelhas com glossae mais longas coletaram mais xarope de açúcar e voaram mais lentamente da colônia para a fonte de alimento.

Alterações no perfil dos lábios de pacientes submetidos a avanços maxilares em cirurgia ortognática do tipo Le Fort I

A literatura que descreve os resultados das correções cirúrgicas nos tecidos moles é limitada, pois apresenta significativa variação e não oferece conclusões definitivas. O propósito desse artigo é estudar retrospectivamente os efeitos das cirurgias ortognáticas maxilares tipo Le Fort I nos lábios superiores e inferiores de pacientes adultos e discutir os potenciais problemas envolvidos com a metodologia aplicada. Foram estudados 19 pacientes brancos de 19 a 42 anos de idade, sendo 10 homens e 9 mulheres, submetidos a cirurgias maxilares no Centro de Pesquisa e Tratamento das Deformidades Buco-Faciais - CEDEFACE (Araraquara, SP). A grande maioria dos casos apresentou, no mínimo, uma discrepância significativa, seja ântero-posterior ou vertical, reforçando a sua indicação cirúrgica. As alterações nos tecidos moles foram significativas quando as movimentações horizontais ou verticais da base óssea maxilar foram significativas, com uma relação de aproximadamente 0,6:1 entre as alterações ântero-posteriores do lábio superior e a movimentação da base óssea. Alterações verticais na maxila, sem significativas alterações horizontais, não foram suficientes para aumentar verticalmente o lábio superior. Ocorreram alterações ântero-posteriores do lábio inferior em conseqüência do deslocamento anterior e inferior da maxila, o que permitiu um melhor selamento labial. Alterações verticais não foram quantificadas no lábio inferior.

Efeitos dentoesqueléticos produzidos pelo aparelho de Herbst na dentadura mista

OBJETIVO: o objetivo desta pesquisa clínica prospectiva foi avaliar as alterações cefalométricas dentárias e esqueléticas produzidas pelo aparelho de Herbst em jovens com má oclusão de Classe II, 1ª divisão durante a dentadura mista. METODOLOGIA: trinta jovens (15 do gênero masculino e 15 do feminino) com idade média inicial de 9 anos e 10 meses foram tratados com o aparelho de Herbst por um período de 12 meses. Para a comparação dos grupos utilizou-se uma amostra controle de 30 jovens (15 do gênero masculino e 15 do feminino) Classe II, 1ª divisão, com idade média inicial de 9 anos e 8 meses, que foram mantidos sem tratamento durante 12 meses. Para cada jovem foram utilizadas duas telerradiografias em norma lateral, obtidas ao início e no final do período de acompanhamento. Utilizou-se um método convencional de avaliação cefalométrica e o método proposto por Pancherz. RESULTADOS E CONCLUSÕES: os resultados deste estudo demonstraram que os efeitos do aparelho de Herbst produzidos na dentadura mista foram primariamente de natureza dentoalveolar. Os incisivos inferiores foram inclinados para vestibular e os superiores foram retruídos; também houve uma extrusão significante dos molares inferiores, enquanto os superiores sofreram restrição de desenvolvimento no sentido vertical. Não houve diferença significante de restrição do crescimento anterior da maxila entre os dois grupos. No sentido vertical da face, a altura facial ântero-inferior se comportou de forma similar, não demonstrando alteração significante entre os grupos. O tratamento com o aparelho de Herbst produziu um aumento modesto, porém, significante no comprimento da mandíbula comparado ao grupo controle. Este aumento, entretanto, foi de menor magnitude que aquele observado em pacientes adolescentes utilizando o mesmo protocolo de tratamento. A correção do overjet (Herbst) ocorreu devido a 22% de alterações esqueléticas e 78% de alterações dentárias. A correção da relação molar ocorreu devido a 27% de alterações esqueléticas e 73% de alterações dentárias.

Miniplacas de ancoragem no tratamento da mordida aberta anterior

INTRODUÇÃO: o relato de caso apresentado descreve um tratamento ortodôntico auxiliado por miniplacas, de uma paciente adulta que apresentava mordida aberta anterior acentuada, rotação horária da mandíbula, biprotrusão e ausência de selamento labial. Após a extração dos primeiros molares e retração dentária superior e inferior, associada ao controle vertical propiciado pelas placas, ocorreu uma pequena rotação anti-horária da mandíbula e a correção da mordida aberta anterior, com significativa melhora facial. OBJETIVO: o presente relato corrobora as evidências atuais quanto à eficiência do uso de miniplacas de titânio como ancoragem temporária, especialmente em situações de correções de grande amplitude, envolvendo um problema vertical.

Study of stress distribution with finite element method in a root with prefabricated threaded split shaft post - Part I

A finite element analysis was carried out to study the role of prefabricated threaded split shaft post (Flexi-Post) on dentinal stress in pulpless tooth. Three dimensional plane strain model of mesio-distal section of a human maxillary central incisor without restoration was analysed with the MSC/NASTRAN (MacNeal/ Schwendler) general purpose finite analysis program was executed on a microcomputer. The model as discretized into 48.954 axisymmetric finite elements defined by 10.355 nodes. Each element was assigned unique elastic properties to represent the materials modeled. Homogeneity, isotropy and linear elasticity were assume for all material. A simulation of static load of 100N was applied to the incisal edge of the post; vertical. Maximal principal stresses and von Mises equivalent stress were calculated. Using the element analysis model employed in this study, the following can be concluded concerning threaded split shaft post (Flexi-Post): Maximum principal stresses in dentin were located at cervical place and at the post apex. The apical threads of the post not redirecting stresses away from the root.

Effect of rotary or manual instrumentation, with or without a calcium hydroxide/1% chlorhexidine intracanal dressing, on the healing of experimentally induced chronic periapical lesions

Objective. To evaluate the healing of experimentally induced chronic periapical lesions in dogs at 30, 75, and 120 days after root canal instrumentation with rotary NiTi files or manual K-files, with or without a calcium hydroxide/1% chlorhexidine paste intracanal dressing.Study design. The second, third, and fourth mandibular premolars and the second and third maxillary premolars of 5 dogs (12 to 18 months of age, weighing 8 to 15 kg) were selected for treatment (a total of 82 root canals). After pulp removal, the root canals were left exposed to the oral cavity for 7 days to allow microbial contamination, after which the root canals were sealed with ZOE cement until periapical lesions were confirmed with radiography. Group I and II teeth were instrumented with manual K-files using the crown-down technique. In group III and IV teeth, NiTi rotary files were used. The apical delta was perforated by using #20 to #30 K-files at the length of the tooth, thus creating a standardized apical opening. The apical stop was enlarged to size 70, with 2.5% sodium hypochlorite irrigation at each file change. Teeth in groups II and IV were dressed with calcium hydroxide (Ca(OH)(2))/1% chlorhexidine (CHX) paste for 15 days before root filling. Group I and III teeth did not receive an intracanal dressing. The access openings of the teeth were permanently restored with silver amalgam condensed on a glass ionomer cement base. Pairs of standardized periapical radiographs were taken at the beginning of the treatment (0 days) and at 30, 75, and 120 days after filling.Results. There was no significant difference in the rate of radiographic healing of the periapical lesions between manual and rotary instrumentation. Radiographs taken at 120 days showed that the treatment with Ca(OH)(2)/1% CHX paste resulted in a significant reduction in mean size of the periapical lesions in comparison to single-session treatment. These findings were also true for histologic observations.Conclusion. The findings support the hypothesis that, regardless of the instrumentation technique (manual or rotary), the use of an intracanal dressing is important in the endodontic treatment of dog's teeth with experimentally induced chronic periapical lesions.

Analysis of the crown fractures and crown-root fractures due to dental trauma assisted by the Integrated Clinic from 1992 to 2002

The purpose of this study was to analyze crown fractures and crown-root fractures due to dentoalveolar trauma, treated in the Integrated Clinic comprehensive dental care at Aracatuba School of Dentistry (UNESP), from January 1992 to July 2002. The data were obtained from files of trauma cases. on the analysis period, 293 patients had crown fractures or crown-root fractures, in 605 teeth. Sixty-nine percent were males and 31% were females. Adolescents between 11 and 18 years old were the most prevalent group (41.6%) and the maxillary arch was the most commonly traumatized (83%). The most commonly affected tooth was the maxillary central incisor (58.3%). The most frequent causes were falls from bicycles (30.8%). It was concluded that the reality of the local service is similar to the published data.

Sentinel node detection in cervical cancer with Tc-99m-phytate

Objectives. The aim of this study was to investigate the feasibility of sentinel lymph node (SLN) identification using radioisotopic lymphatic mapping with technetium-99 m-labeled phytate in patients undergoing radical hysterectomy with pelvic lymphadenectomy for treatment of early cervical cancer.Methods. Between July 2001 and February 2003, 56 patients with cervical cancer 1160 stage I (it 53) or stage 11 (it 3) underwent sentinel lymph node detection with preoperative lymphoscintigraphy (Te-99m-labeled phytate injected into the uterine cervix, at 3, 6, 9, and 12 o'clock, at a dose of 55-74 MBq in a volume of 0.8 ml) and intratoperative lymphatic mapping with a handheld gamma probe, Radical hysterectomy was aborted in three cases because parametrial invasion was found intraoperatively and we performed only sentinel node resection. The remaining 53 patients underwent radical hysterectomy with complete pelvic lymphadenectomy, Sentinel nodes were detected using a handheld gamma-probe and removed for pathological assessment during the abdominal radical hysterectomy and pelvic lymphadenectomy.Results. One or more sentinel nodes were detected in 52 out of 56 eligible patients (92.8%). A total of 120 SLNs were detected by lymphoscintigraphy (mean 2.27 nodes per patient) and intraoperatively by gamma probe, Forty-four percent of SLNs were found in the external iliac area, 39% in the obturator region, 8.3% in interiliae region, and 6.7),) in the common iliac area. Unilateral sentinel nodes were found in thirty-one patients (59%). The remaining 21 patients (4100 had bilateral sentinel nodes, Microscopic nodal metastases were confirmed in 17 (32%) cases. In 10 of these patients, only SLNs had metastases. The 98 sentinel node.,, that were negative on hematoxylin and eosin were submitted to cytokeratin immunohistochemical analysis. Five (5.1%) micrometastases were identified with this technique. The sensitivity of the sentinel node was 82.3% (CI 95% - 56.6-96.2) and the negative predictive value was 92.1% (CI 95% 78.6 98.3) the accuracy of sentinel node in predicting the lymph node status was 94.2%,Conclusion. Preoperative lymphoscintigraphy and intraoperative lymphatic mapping with Tc-99-labeled phytate are effective in identifying sentinel nodes in patients undergoing radical hysterectomy and to select women in whom lymph node dissection call be avoided. (c) 2005 Elsevier B.V. All rights reserved.

Treatment of posterior crossbite in mixed dentition with a removable appliance: Reports of cases

A posterior crossbite malocclusion is defined as an abnormal buccolingual relationship. One or more maxillary teeth improperly occludes with one or more mandibular teeth in centric relation. This alteration develops early and is seldom self-correcting. This study is a report of the benefits of treating posterior crossbite malocclusions in mixed dentitions using removable appliances.

Comparison of accuracy between compression- and injection-molded complete dentures

Statement of problem. A clinically significant incisal pin opening may occur after processing complete dentures if a compression molding technique is used. To recover the proper vertical dimension of occlusion, a time-consuming occlusal adjustment is necessary that often destroys the anatomy of the artificial teeth. A new injection molding process claims to produce dentures that require few, if any, occlusal adjustments in the laboratory after processing.Purpose. This laboratory study compared incisal pin opening, dimensional accuracy, and laboratory working time for dentures fabricated by this new injection system with dentures constructed by the conventional compression molding technique.Material and methods. Two groups of 6 maxillary and 6 mandibular dentures were evaluated as follows: group 1 (control), Lucitone 199, compression molded with a long cure cycle; and group 2, Lucitone 199, injection molded with a long cure. Incisal pin opening was measured with a micrometer immediately after deflasking. A computerized coordinate measuring machine was used to measure dimensional accuracy of 3-dimensional variations in selected positions of artificial teeth in 4 stages of denture fabrication. Analysis of variance (ANOVA) and t tests were performed to compare the groups.Results. A significant difference was found in pin opening between groups (t test). Horizontal dimensional changes evaluated with repeated measures ANOVA revealed no significant differences between groups. However, analysis of vertical dimensional changes disclosed significant differences between the groups. There was no appreciable difference in laboratory working time for flasking and molding denture bases between the injection and compression molding techniques when polymethyl methacrylate resin was used.Conclusion. The injection molding method produced a significantly smaller incisal pin opening over the standard compression molding technique. The injection molding technique, using polymethyl methacrylate, was a more accurate method for processing dentures. There were no appreciable differences in laboratory working time between the injection and compression molding techniques.

Consequences of crown fractures with pulpal exposure: histopathological evaluation in dogs

When a crown fracture involving pulpal exposure is produced, the therapeutic treatment to be applied depends to a great extent on the general histopathological condition of the exposed pulp. Hence, the objective of this study was to evaluate histopathological and bacteriological changes occurring in dental tissue and periradicular tissue of crown-fractured teeth with pulpal exposure. Twenty-four anterior teeth (central and lateral incisors) from the maxillary teeth of four young, adult Mongrel dogs were used. At 48 and 72 h after performing the crown fractures, the animals were sacrificed and the results evaluated. Both observation periods revealed the existence of an area of superficial inflammation with the formation of hyperplastic tissue towards the external surface. Intense neutrophilic infiltrate was observed below it. Mean depth of inflammation was greater at 48 h (4633.33 mum) than at 72 h (3933.33 mum), perhaps coinciding with the bigger pulp chamber opening (x1332.14 mum at 48 h vs. x479.52 mum at 72 h). Upon approaching the cervical portion, the inflammation became less. Bacterial contamination was constant in all the cases evaluated, worsening the histopathological findings with exposure time. This study demonstrates that when a crown fracture with pulpal exposure is produced, the success in treating it depends partly on how quickly therapeutic treatment is administered.

Comparative study of the Frankel (FR-2) and bionator appliances in the treatment of Class II malocclusion

The purpose of this investigation was to compare the dentoalveolar and skeletal cephalometric changes produced by the Frankel (FR-2) and bionator appliances in persons with Class 11 malocclusion. Lateral cephalograms were available for 66 patients of both sexes, who were divided into 3 groups of 22. The control group included untreated Class 11 children, with an initial mean age of 8 years 7 months; they were followed without treatment for 13 months. The FR-2 appliance group had an initial mean age of 9 years; those children were treated for a mean period of 17 months. The bionator group initially had a mean age of 10 years 8 months; on average, they were treated for 16 months. The results demonstrated no significant changes in maxillary growth during the evaluation period. Both appliances showed statistically significant increases in mandibular growth and mandibular protrusion, with greater increases in patients treated in the bionator group. Both experimental groups showed an improvement in the maxillomandibular relationship. There were no significant changes in growth direction, while the bionator group had a greater increase in posterior facial height. Both appliances produced similar labial tipping and protrusion of the lower incisors, lingual inclination, retrusion of the upper incisors, and a significant increase in mandibular posterior dentoalveolar height. The major treatment effects of bionator and FR-2 appliances were dentoalveolar, with a smaller, but significant, skeletal effect.

Periodontal changes in patients undergoing radiotherapy

Background: the purpose of this study was to evaluate changes in the periodontium in patients who received head and neck radiation therapy.Methods: Periodontal clinical parameters (probing depth, clinical attachment level, gingival recession, plaque index, and bleeding on probing) were assessed on 27 patients before and 6 to 8 months following radiation therapy in the head and neck area.Results: the greatest changes occurred in clinical attachment level: overall, 70.3% of the patients showed a loss, with 92% evincing loss in the mandible. Attachment loss was directly related to the field of radiation and was greater when the jaws were actually included in the irradiated area.Conclusion: Periodontal status should be evaluated prior to and following radiation therapy in the oral-maxillary-facial region to help ensure that periodontal health is maintained in oncology patients.