Glacier advances in northeastern Turkey before and during the global Last Glacial Maximum

Abstract Our study in the Başyayla Valley in northeastern Anatolia showed evidence of four glacier advances that built terminal and lateral moraines. Surface exposure dating of boulders on these moraines showed that the Maximum Ice Extent (MIE) was asynchronous with the global Last Glacial Maximum (LGM; 22.1 ± 4.3 thousand years; ka). The local {MIE} took place at least 57.0 ± 3.5 ka ago. The extent of the Başyayla Glacier during this advance is not known exactly because the boulders are only preserved on a lateral moraine. The next advance was prior to 41.5 ± 2.5 ka, and it descended down the valley to approximately 2320 m above sea level (m a.s.l.), with a glacier length of 5.3 km. During the early global LGM, the Başyayla Glacier extended for a distance of 4.9 km down to approx. 2430 m a.s.l. The last recorded advance occurred during the global LGM. This extension was 0.7 km smaller than the local {MIE} and its terminus reached 2490 m a.s.l. only. The exposure ages of boulders in a retreat position at an altitude of approx. 3045 m a.s.l. indicate that the valley has remained ice-free since the Lateglacial period. Therefore, the Lateglacial extent was limited to the cirque system in the uppermost part of the catchment. Furthermore, Holocene glacier oscillations seem to be either absent or restricted to solifluction in the whole catchment and to rock glacier movements in the southern tributary of the Başyayla Valley system.

Quaternary uplift rates of the Central Anatolian Plateau, Turkey: insights from cosmogenic isochron-burial nuclide dating of the Kızılırmak River terraces

The Central Anatolian Plateau (CAP) in Turkey is a relatively small plateau (300 × 400 km) with moderate average elevations of ∼1 km situated between the Pontide and Tauride orogenic mountain belts. Kızılırmak, which is the longest river (1355 km) within the borders of Turkey, flows within the CAP and slowly incises into lacustrine and volcaniclastic units before finally reaching the Black Sea. We dated the Cappadocia section of the Kızılırmak terraces in the CAP by using cosmogenic burial and isochron-burial dating methods with 10Be and 26Al as their absolute dating can provide insight into long-term incision rates, uplift and climatic changes. Terraces at 13, 20, 75 and 100 m above the current river indicate an average incision rate of 0.051 ± 0.01 mm/yr (51 ± 1 m/Ma) since ∼1.9 Ma. Using the base of a basalt fill above the modern course of the Kızılırmak, we also calculated 0.05–0.06 mm/yr mean incision and hence rock uplift rate for the last 2 Ma. Although this rate might be underestimated due to normal faulting along the valley sides, it perfectly matches our results obtained from the Kızılırmak terraces. Although up to 5–10 times slower, the Quaternary uplift of the CAP is closely related to the uplift of the northern and southern plateau margins respectively.

Late Glacial and Holocene vegetational changes on the Ulagan high-mountain plateau, Altai Mountains, southern Siberia

Three well-dated pollen diagrams from 1985 m, 2050 m, and at the tree line at 2150 m asl show the vegetational succession in the central Altai Mountains since 16 cal ka BP. Pioneer vegetation after deglaciation was recorded first at the lowest site. Subsequently, dense dry steppe vegetation developed coincident with the change from silt to organic sediments at the two lower sites, but silt lasted longer at the highest site, indicating the persistence of bare ground there. Forests of Pinus sibirica, Pinus sylvestris, Picea obovata, Larix sibirica, Abies sibirica, and Betula pendula started to develop about 12 cal ka BP with the change to a warmer and wetter climate at the beginning of the Holocene. Results indicate that the timberline did not rise above the highest site. Mesophilous dark-coniferous forests were fully developed by 9.5 cal ka BP. The role of Abies and Picea decreased by about 7.5 cal ka BP suggesting cooler climate, after which the forests changed little until today. The vegetational development in this portion of the central Altai Mountains is compatible with that described in neighbouring areas of the Altai, southern Siberia, Mongolia, and Kazakhstan.

Eclogitic diamonds from variable crustal protoliths in the northeastern Siberian craton: trace elements and coupled δ13C – δ18O signatures in diamonds and garnet inclusions

Diamonds of eclogitic assemblages are dominant in the placer diamond deposits of the northeastern Siberian platform. In this study we present new trace elements and stable isotopes (δ13C and δ18O) data for alluvial diamonds and their garnet inclusions from this locality. Cr-rich garnets of peridotitic affinity in the studied diamonds have a narrow range of δ18O values from 5.7‰ to 6.2‰, which is largely overlapping with the accepted mantle range. This narrow range suggests that the garnet inclusions showing different REE patterns and little variations in oxygen isotopes may have formed by different processes involving fluid/melts that, however, were in oxygen isotopic equilibrium with the mantle. The trace element composition of the eclogitic garnet inclusions supports a crustal origin for at least the high-Ca garnets, which show flat HREE patterns and in some cases a positive Eu-anomaly. High-Ca eclogitic garnets generally show heavier oxygen isotope compositions (δ18O 6.5–9.6‰) than what is observed in low-Ca garnets (δ18O 5.7–7.4‰). The variability in oxygen isotopes and trace elements is suggested to be inherited from contrasting crustal protoliths. The relationship between the high δ18O values of inclusions and the low δ13C values of the host diamonds implies that the high-Ca garnet inclusions were derived from intensely hydrated (e.g., δ18O > 7‰) and typically oxidised basaltic rock close to the seawater interface, and that the carbon for diamonds was closely associated with this protolith.

Addition of magnesium sulphate to ropivacaine for spinal analgesia in dogs undergoing tibial plateau levelling osteotomy

The aim of this blinded, randomised, prospective clinical trial was to determine whether the addition of magnesium sulphate to spinally-administered ropivacaine would improve peri-operative analgesia without impairing motor function in dogs undergoing orthopaedic surgery. Twenty client-owned dogs undergoing tibial plateau levelling osteotomy were randomly assigned to one of two treatment groups: group C (control, receiving hyperbaric ropivacaine by the spinal route) or group M (magnesium, receiving a hyperbaric combination of magnesium sulphate and ropivacaine by the spinal route). During surgery, changes in physiological variables above baseline were used to evaluate nociception. Arterial blood was collected before and after spinal injection, at four time points, to monitor plasma magnesium concentrations. Post-operatively, pain was assessed with a modified Sammarco pain score, a Glasgow pain scale and a visual analogue scale, while motor function was evaluated with a modified Tarlov scale. Assessments were performed at recovery and 1, 2 and 3 h thereafter. Fentanyl and buprenorphine were administered as rescue analgesics in the intra- and post-operative periods, respectively. Plasma magnesium concentrations did not increase after spinal injection compared to baseline. Group M required less intra-operative fentanyl, had lower Glasgow pain scores and experienced analgesia of longer duration than group C (527.0 ± 341.0 min vs. 176.0 ± 109.0 min). However, in group M the motor block was significantly longer, which limits the usefulness of magnesium for spinal analgesia at the investigated dose. Further research is needed to determine a clinically effective dose with shorter duration of motor block for magnesium used as an additive to spinal analgesic agents.

Use of a perineural coiled catheter at the sciatic nerve in dogs after tibial plateau levelling osteotomy – preliminary observations

The analgesic effects of peripheral nerve blocks can be prolonged with the placement of perineural catheters allowing repeated injections of local anaesthetics in humans. The objectives of this study were to evaluate the clinical suitability of a perineural coiled catheter (PCC) at the sciatic nerve and to evaluate pain during the early post-operative period in dogs after tibial plateau levelling osteotomy. Pre-operatively, a combined block of the sciatic and the femoral nerves was performed under sonographic guidance (ropivacaine 0.5%; 0.3 mL kg−1 per nerve). Thereafter, a PCC was placed near the sciatic nerve. Carprofen (4 mg kg−1 intravenously) was administered at the end of anaesthesia. After surgery, all dogs were randomly assigned to receive four injections of ropivacaine (group R; 0.25%, 0.3 mL kg−1) or NaCl 0.9% (group C; 0.3 mL kg−1) every 6 h through the PCC. Pain was assessed by use of a visual analogue scale (VAS) and a multi-dimensional pain score (4Avet) before surgery (T-1), for 390 min (T0, T30, T60, T120, T180, T240, T300, T360 and T390) as well as 1 day after surgery (Day 1). Methadone (0.1 mg kg−1) was administered each time the VAS was ≥40 mm or the 4Avet was ≥5. At T390 dogs received buprenorphine (0.02 mg kg−1). Data were compared using Mann–Whitney rank sum tests and repeated measures analysis of variance. Regardless of group allocation, 55% of dogs required methadone. VAS was significantly lower at T390 (P = 0.003), and at Day 1 (P = 0.002) and so was 4Avet at Day 1 (P = 0.012) in group R than in group C. Bleeding occurred in one dog at PCC placement and PCC dislodged six times of 47 PCCs placed. Minor complications occurred with PCC but allowed four repeated administrations of ropivacaine or saline over 24 h in 91.5% of the cases.

Synchronous Holocene climatic oscillations recorded on the Swiss Plateau and at timberline in the Alps

Eight synchronous pre-Roman cold phases were found at 9600–9200, 8600–8150, 7550–6900, 6600– 6200, 5350–4900, 4600–4400, 3500–3200 and 2600–2350 radiocarbon years BP by reconstructing past climate at two sites on the Swiss Plateau and at timberline in the Alps. The cooling events during the early-and mid-Holocene represent temperature values similar to today, and apparently the onset of cooling events represents a deviation from today's mean annual temperature of about 1°C and is triggered at a 1000-year periodicity. At Wallisellen-Langachermoos (440 m), a former oligotrophic lake near Zürich, the correlation between sum mertime lake levels and the seed production of the amphi-Atlantic aquatic plantNajas flexilis was used to reconstruct lake levels over a 3000-year period during the first part of the Holocene. At Lake Seedorf on the western Swiss Plateau (609 m) the sedimentological, palynological and macrofossil record revealed fluctuations of lake levels for the complete Holocene. From Lago Basso in the southern Alps (2250 m, Val San Giacomo near Splügen Pass, Northern Italy) the terrestrial plant macrofossils – especiallyPinus cembra andLarix – allowed the reconstruction of timberline fluctuations controlled by climate. A similar climatic pattern was found at Gouillé Rion pond in the central Swiss Alps (2343 m, Val d'Hérémence) with plant macrofossils and pollen concentrations and percentages. We postulate that these climatic events are detectable throughout central Europe by independent methods in combination with precise AMS-radiocarbon datings on terrestrial plant remains. Our data fit other proxy records of regional climatic change, such as cool intervals from Greenland ice cores, glacier movements in the Swiss and Austrian Alps, and dendro-densitometry on subfossil wood, as well as the palaeoclimatic data from the Jura Mountains of France obtained by sedimentological analyses. Thus our data indicate that the Northern Hemisphere climate was less stable during the Holocene than previously believed.

Effects of Strand Geometry on Selected Properties of Long-Stand Structural Composite Lumber Made from Northeastern Hardwoods

Structural composite lumber (SCL) products often possess significantly higher design values than the top grades of solid lumber, making it a popular choice for both residential and commercial applications. The enhanced mechanical properties of SCL are mainly due to defect randomization and densification of the wood fiber, both largely functions of the size, shape and composition (species) of the wood element. Traditionally, SCL manufacturers have used thin, rectangular elements produced from either moderate density softwoods or low density hardwoods. Higher density hardwood species have been avoided, as they require higher pressures to adequately densify and consolidate the wood furnish. These higher pressures can lead to increased manufacturing costs, damage to the wood fiber and/or a product that is too dense, making it heavy and unreceptive to common mechanical fastening techniques. In the northeastern United States high density, diffuse-porous hardwoods (such as maple, beech and birch) are abundant. Use of these species as primary furnish for a SCL product may allow for a competitive advantage in terms of resource cost against products that rely on veneer grade logs. Proximity to this abundant and relatively inexpensive resource may facilitate entry of SCL production facilities in the northeastern United States, where currently none exist. However, modifications to current strand sizes, geometries or production techniques will likely be required to allow for use of these species. A new SCL product concept has been invented allowing for use of these high density hardwoods. The product, referred to as long-strand structural composite lumber (LSSCL), uses strands of significantly larger cross sectional areas and volumes than existing SCL products. In spite of the large strand size, satisfactory consolidation is achieved without excessive densification of the wood fiber through use of a symmetrical strand geometric cross-section. LSSCL density is similar to that of existing SCL products, but is due mainly to the inherent density of the species, rather than through densification. An experiment was designed and conducted producing LSSCL from both large (7/16”) and small (1/4”) strands, of both square and triangular geometric cross sections. Testing results indicate that the large, triangular strands produce LSSCL beams with projected design values of: Modulus of elasticity (MOEapp) – 1,750,000 psi; Allowable bending stress (Fb) – 2750 psi; Allowable shear stress (Fv) – 260 psi. Several modifications are recommended which may lead to improvement of these values, likely allowing for competition against existing SCL products.

Transition Zones of Forested Inland Wetlands in Northeastern Connecticut

Inland wetlands are valuable natural resources intimately associated with the hydrologic cycle. This study was designed to (1) investigate vegetation distribution and selected physical and chemical properties of wetland and bordering upland soils and the interface between the two, and (2) provide the ground truth necessary for the identification and delineation of deciduous wetland forests using false-color infrared (FCIR) imagery.

Paleomagnetic of basalts from the Kerguelen Plateau

Paleomagnetic measurements were performed on 106 basalt samples collected from Holes 747C, 748C, 749C, and 750B. Basalt samples were recovered from the southern portion of the Kerguelen Plateau and the transitional zone between the northern and southern plateau in the south central Indian Ocean. The ages of basalts range from 100 to 115 Ma. In addition to the preliminary shipboard measurements (Schlich, Wise, et al., 1989, doi:10.2973/odp.proc.ir.120.1989), characteristic inclinations of the magnetization were obtained using mainly stepwise thermal demagnetization of the samples. Reliable paleomagnetic results were obtained from three sites (Sites 747, 748, and 749). The paleomagnetic inclinations of Sites 747, 748, and 749 are -51°, -63°, and -62°, respectively. The considerable differences between the paleomagnetic and present inclinations of about 70° at Sites 747, 748, and 749 indicate that displacement in the direction of the geomagnetic meridian has taken place since formation of the basalt. Shallower paleomagnetic inclinations than the present inclinations at each site imply a southward movement of the sites with respect to the geomagnetic pole. By comparing the apparent polar wander path of Antarctica with the virtual geomagnetic pole (VGP) of the Southern Kerguelen Plateau, we have concluded that no major tectonic movement has taken place between the Kerguelen Plateau and Antarctica since formation of the basalt (i.e., 100-115 Ma). The angular dispersion of the VGP for the Kerguelen Plateau is calculated as 17°.

Diversity and faunal composition of benthic foraminifera in Hole 44-390A on the Blake Nose Plateau

Benthic foraminiferal assemblages are a widespread tool to understand changes in organic matter flux and bottom-water oxygenation and their relation to paleoceanographic changes in the Upper Cretaceous oceans. In this study, assemblage data (diversity, total number, and number per species and gram) from Deep Sea Drilling Project (DSDP) Site 390 (Blake Nose, western North Atlantic) were processed for the lower Maastrichtian (Globotruncana falsostuarti - Gansserina gansseri Planktic Foraminiferal Zone). These data document significant changes in nutrient flux to the sea floor as well as bottom-water oxygenation during this time interval. Parallel to the observed changes in the benthic foraminiferal assemblages the number of inoceramid shells decreases, reflecting also a significant increase in bottom-water oxygenation. We speculate, that these data could reflect the onset of a shift from warmer low-latitude to cooler high-latitude deep-water sources. This speculation will predate the major reorganization of the oceanic circulation resulting in a circulation mode similar to today at the Early/Late Maastrichtian boundary by ~1 Ma and therefore improves our understanding of Late Cretaceous paleoceanography.