911 resultados para Metodologia sistêmica Soft
Resumo:
The objective of this study was to evaluate the use of the matrix solid-phase dispersion technique associated with purification at low temperature for the determination of pyrethroids in butter. Evaluated parameters included: sample/adsorbent ratio, type of adsorbent and extractor solvent. The optimized method was validated based on predetermined requirements. The detection limits of the pyrethroids cypermethrin and deltamethrin were 0.082 and 0.11 μg g-1, and quantification limit were 0.28 and 0.32 μg g-1, respectively, with extraction percentages near 90% and coefficients of variation less than of 10%..
Resumo:
The aim of this work is to propose a methodology to evaluate the evolution of the pore blockage of limestone during the sulfation reaction. The experiments were performed for a national limestone (dolomite) with average particle size of 545 μm in interrupted sulfation tests were conducted at seven different times and at three different temperatures of the process. The empirical data were obtained from porosimetry tests to establish BET surface area, volume and average size of pore and distribution of pore sizes of the sulfated samples. Thermogravimetric tests were performed to evaluate the preparation methodology of the samples used in the porosimetry tests.
Resumo:
This work presents the optimization of the microwave-assisted hydrothermal synthesis of [Zn(BDC)(H2O)2]n . The reactions were carried out at the fixed temperature of 120 ºC for 10, 20, 30 and 40 min. Pure crystalline [Zn(BDC)(H2O)2]n was obtained in high yield (ca. 90%) with a reaction time of 10 min. The phase obtained and its purity was confirmed by Rietveld refinement, with a final value for Rwp/Rexp equal to 1.48. Increased reaction times (20, 30 and 40 min) favored the formation of unwanted by products, resulting in mixtures of several crystalline phases.
Resumo:
This works describes the use of experimental design and surface response methodology for optimization of saponin extraction from Ampelozizyphus amazonicus. For this purpose, a method employing extraction based on maceration assisted by ultrasound technique was utilized. The following factors were studied: extraction length of time and solvent composition. The total saponin was determined by using a gravimetric method and the results expressed by their relative proportion to total crude extract. For the specific condition, 60% hydro-alcoholic solution and 18 minutes extraction length of time has shown the best results. This method can be useful for extraction of substances with biological importance
Resumo:
The influence of temperature, storage time and the addition of hydrochloride L-cysteine in the preservation of the fungicide mancozeb was studied under field conditions in the surface layer of a Cambisol collected in an area planted with cabbage in Nova Friburgo - RJ, Brazil. The results of this study showed an efficiency of up to 42% in the preservation of the fungicide in the samples treated with cysteine and stored at low temperatures compared to those not treated and kept at room temperature
Resumo:
Ajankohtaista
Resumo:
The development of analytical procedures to evaluate transesterification process is still a challenge in biodiesel production. Then, this paper shows an electroanalytical methodology to transesterification process assessment, proposing the application of nanostructured TiO2 electrodes. The results showed, for sunflower oil - methanol reaction catalyzed by KOH, a reduction peak in - 1050 mV and the gradual appearance of a second peak at - 1160 mV. This peak was observed as originated by the transesterification process and is probably related to intermediates. By measuring the intensity of this peak a kinetic profile was determined, showing that the conversion is almost finished in 2 h.
Resumo:
The present research aimed to study the parameters that affect the determination of estrogens in sewage upon the use of SPE and determination by using gas chromatography mass spectrometry (GC/MS). The study evaluated the stabilization pond technology with regard to estrogens removal. The results showed that the methodology was able to identify and quantify the estrogens E1, E2, E2-17A and EE2 in sewage. Moreover, the estrogens sometimes were not removed in the stabilization pond, showing that even the high hydraulic retention time (HRT) and high sunlight intensity were not enough to degrade these compounds completely during load peaks.
Resumo:
In this paper, we describe an educational experience involving the use of the jigsaw method on the Medicinal Chemistry course at the University of São Paulo, Brazil. The goal of this proposal was to investigate acceptance and contributions of the method to undergraduate chemistry teaching. Feedback on the jigsaw method collected from the focus groups and questionnaires showed that participants generally acknowledged the advantages of the jigsaw method in helping them learn the Medicinal Chemistry subject. Suggestions for improving the jigsaw method were also received from participants.
Resumo:
This work aimed to adapt the analysis of methemoglobin recommended by Evelyn - Malloy (visible spectrophotometry), in order to facilitate its application in the field, or to analysis in clinical laboratory, of existing sites of diflubenzuron application. The parameters changed included: centrifuge rotation speed; time between the collection of biological sample and analysis, and storage temperature of the samples; and the volume of reagents. The comparison of the rotation speed (rpm) of the reference methodology with the rpm of a "clinical centrifuge" did not reveal a statistically significant difference in the levels of methemoglobin. The time between the collection of biological sample and analysis was extended for a period of up to 48 hours for both conservation by refrigeration and ambient temperature, producing no statistically significant difference when compared to the standard duration of 2 hours. Regarding the reagents, the reference methodology already uses the volume necessary to ensure complete reaction, whereas a wider range from the recommended volume to a 5-fold reduction in comparison to the reference methodology could be used. It was concluded that the proposed changes to the methodology for adapting the analysis are applicable to studies of field / workplace exposure and ensure the reliability of results. The adapted methodology was inter-laboratory validated and the parameters changed can be selected according to the requirements of the laboratory at which the methemoglobin is to be measured.
Resumo:
Objetivou-se verificar o efeito da luz sobre o crescimento micelial de Fusarium moniliforme em meio de cultura contendo fungicidas, o melhor regime luminoso e a variável a ser utilizada para detectar o patógeno em sementes tratadas de milho (Zea mays), e o efeito do tratamento sobre a qualidade sanitária e fisiológica das sementes. Os fungicidas avaliados foram fludioxonil + metalaxil-m (três concentrações), difenoconazole, acibenzolar-S-metílico e captan + tiabendazole. Para avaliação do crescimento micelial, os fungicidas foram adicionados em meio de cultura, nas concentrações de 100, 10 e 1 æg/ml. Incubaram-se as placas sob temperatura de 20±2 ºC e três condições de luz: escuro contínuo, luz branca e luz próxima da ultra violeta (12h de luz/12 de escuro). Para verificar o efeito da luz na avaliação das sementes tratadas, utilizou-se o método do papel de filtro com congelamento; a sanidade foi avaliada pelas variáveis incidência e severidade. Duas amostras de sementes tratadas foram submetidas aos testes de sanidade, germinação, emergência em casa de vegetação e frio, para verificar o efeito do tratamento sobre a qualidade sanitária e fisiológica. O teste in vitro indicou que a luz branca diminuiu o efeito dos ingredientes ativos fludioxonil + metalaxil-m (7,5 g + 11,51 g/l e 25 g + 10 g/l) e captan + tiabendazole; no teste de sanidade não se observou esse efeito. A severidade foi mais sensível para discriminar a eficiência dos fungicidas. Os resultados obtidos, avaliando-se as amostras de sementes tratadas, demonstraram que: F. moniliforme não afeta a qualidade fisiológica dessas sementes; o fungicida que ofereceu controle do patógeno na semente, acima de 90%, foi captan + tiabendazole, seguido de fludioxonil + metalaxil-m (97,2 g + 147,86 g/l); Pythium sp. foi controlado por captan + tiabendazole e por fludioxonil + metalaxil-m nas três concentrações.
Resumo:
A indução de resistência sistêmica mediada por rizobactérias promotoras do crescimento de plantas foi avaliada para a ferrugem do eucalipto (Eucalyptus spp.) causada por Puccinia psidii. Para isso, mudas com cerca de 80 dias de idade, previamente enraizadas em substrato tratado com diferentes isolados de rizobactérias foram inoculadas com uma suspensão de inóculo de P. psidii ajustada para 2 x 10(4) urediniósporos/ml. As plantas inoculadas foram mantidas em câmara de nevoeiro com nebulização intermitente a 25 ºC, no escuro por 24 h, e posteriormente transferidas para câmara de crescimento a 22 ºC, com fotoperíodo de 12 h e intensidade luminosa de 40 mmoles.s-1.m-2. Utilizou-se um delineamento inteiramente casualizado com quatro repetições, cada uma delas com quatro plantas. Após 13 dias da inoculação, avaliaram-se número médio de pústulas/folha, número de uredínias/amostra e número médio de esporos produzidos/uredínia. Os isolados FL2 e MF4 foram eficientes na redução da severidade da ferrugem. Além disso, o tratamento das mudas com rizobactérias, apenas uma semana antes da inoculação, com P. psidii foi menos eficiente em reduzir a severidade da doença do que o tratamento em que foram utilizadas mudas produzidas em substrato previamente rizobacterizadas, ou seja, com 80 dias. Estes resultados indicam que estes isolados de rizobactérias podem induzir maior resistência a doenças foliares diminuindo a necessidade de aplicação de fungicidas e otimizando a produção de mudas clonais de eucalipto.
Resumo:
O gene Sw-5 do tomateiro confere resistência a várias espécies de tospovírus e codifica uma proteína contendo domínios de ligação a nucleotídeos e repetições ricas em leucina. Tomateiros com Sw-5 exibem reações necróticas nas folhas inoculadas com tospovírus. Estas reações e a estrutura da proteína Sw-5 indicam que a resistência ocorre por meio do reconhecimento do patógeno e desencadeamento da resposta de hipersensibilidade. A capacidade de Sw-5 de conferir resistência a tospovírus em tabaco selvagem (Nicotiana benthamiana Domin.) foi avaliada em plantas transgênicas. Uma construção com a seqüência aberta de leitura de Sw-5 e sua região 3 não-traduzida sob controle do promotor 35S do CaMV foi utilizada para transformação de N. benthamiana via Agrobacterium tumefaciens. Plantas de progênies R1 foram inoculadas com um isolado de tospovírus e avaliadas quanto à ocorrência de reação de hipersensibilidade e resistência à infecção sistêmica. Em uma progênie com segregação 3:1 (resistente:suscetível), foi selecionada uma planta homozigota e sua progênie avaliada quanto ao espectro da resistência a tospovírus. Plantas com o transgene exibiram resposta de hipersensibilidade 48 h após a inoculação, sendo resistentes à infecção sistêmica. O fenótipo da resistência foi dependente do isolado viral e um isolado de Tomato chlorotic spot virus (TCSV) causou necrose sistêmica em todas as plantas inoculadas, enquanto que isolados de Groundnut ringspot virus (GRSV) e um isolado relacionado a Chrysanthemum stem necrosis virus (CSNV) ficaram restritos ao sítio de infecção. Comparações do espectro da resistência obtido neste trabalho com aquele observado em outros membros da família Solanaceae indicam que as vias de transdução de sinais e as respostas de defesa ativadas por Sw-5 são conservadas dentro desta família e polimorfismos genéticos nas vias de transdução de sinais ou em componentes das respostas de defesa podem resultar em diferentes níveis de resistência.