Memphis law journal.

Editor and proprietor: M. B. Trezevant.

Memphis /

[I] Memphis I, 1908, by W.M.F. Petrie and J.H. Walker.--[II] The Palace of Apries (Memphis II) 1909.--[III] Meydum and Memphis III, 1910, by Petrie, E. Mackay, and G. Wainwright.--[IV] Roman portraits and (Memphis IV) 1911.--[V] Tarkhan I and Memphis V, 1912.--[VI] Riqqeh and Memphis VI, 1913, by R. Engelbach and W.M.F. Petrie, 1915.

The influence of ad model ethnicity and self-referencing on attitudes evidence from New Zealand

This paper examines consumers self-referencing as a mechanism for explaining ethnicity effects in advertising. Data was collected from a 2 (model ethnicity: Asian, white) x 2 (product stereotypicality: stereotypical, non-stereotypical) experiment. Measured independent variables included participant ethnicity and self-referencing. Results shows that (1) Asian exhibit greater self-referencing of Asian models than whites do; (2) self-referencing mediates ethnicity effects on attitude ( ie, attitude towards the model, attitude toward the add, brand attitude, and purchase intentions); (3) high self-referencing Asian have more favourable attitude towards the add and purchase intentions than low self referencing Asians; and (4) Asian models advertising atypical products generate more self-referencing and more favourable attitudes toward the model, A, and purchase intentions for both Asians and whites.

Anterior vertebral stapling for the fusionless correction of scoliosis

Fusionless scoliosis surgery is an emerging treatment for idiopathic scoliosis as it offers theoretical advantages over current forms of treatment. Currently the treatment options for idiopathic scoliosis are observation, bracing and fusion. While brace treatment is non-invasive, and preserves the growth, motion, and function of the spine, it does not correct deformity and is only modestly successful in preventing curve progression. In adolescents who fail brace treatment, surgical treatment with an instrumented spinal fusion usually results in better deformity correction but is associated with substantially greater risk. Furthermore in younger patients requiring surgical treatment, fusion procedures are known to adversely effect the future growth of the chest and spine. Fusionless treatments have been developed to allow effective surgical treatment of patients with idiopathic scoliosis who are too young for fusion procedures. Anterior vertebral stapling is one such fusionless treatment which aims to modulate the growth of vertebra to allow correction of scoliosis whilst maintaining normal spinal motion The Mater Misericordiae Hospital in Brisbane has begun to use anterior vertebral stapling to treat patients with idiopathic scoliosis who are too young for fusion procedures. Currently the only staple approved for clinical use is manufactured by Medtronic Sofamor Danek (Memphis, TN). This thesis explains the biomechanical and anatomical changes that occur following anterior vertebral staple insertion using in vitro experiments performed on an immature bovine model. Currently there is a paucity of published information about anterior vertebral stapling so it is hoped that this project will provide information that will aid in our understanding of the clinical effects of staple insertion. The aims of this experimental study were threefold. The first phase was designed to determine the changes in the bending stiffness of the spine following staple insertion. The second phase was designed to measure the forces experienced by the staple during spinal movements. The third and final phase of testing was designed to describe the structural changes that occur to a vertebra as a consequence of staple insertion. The first phase of testing utilised a displacement controlled testing robot to compare the change in stiffness of a single spinal motion segment following staple insertion for the three basic spinal motions of flexion-extension, lateral bending, and axial rotation. For the second phase of testing strain gauges were attached to staples and used to measure staple forces during spinal movement. In the third and final phase the staples were removed and a testing specimen underwent micro-computed tomography (CT) scanning to describe the anatomical changes that occur following staple insertion. The displacement controlled testing showed that there was a significant decrease in bending stiffness in flexion, extension, lateral bending away from the staple, and axial rotation away from the staple following staple insertion. The strain gauge measurements showed that the greatest staple forces occurred in flexion and the least in extension. In addition, a reduction in the baseline staple compressive force was seen with successive loading cycles. Micro-CT scanning demonstrated that significant damage to the vertebral body and endplate occurred as a consequence of staple insertion. The clinical implications of this study are significant. Based on the findings of this project it is likely that the clinical effect of the anterior vertebral staple evaluated in this project is a consequence of growth plate damage (also called hemiepiphysiodesis) causing a partial growth arrest of the vertebra rather than simply compression of the growth plate. The surgical creation of a unilateral growth arrest is a well established treatment used in the management of congenital scoliosis but has not previously been considered for use in idiopathic scoliosis.

A biomechanical analysis of growing rods used in the management of early onset scoliosis

INTRODUCTION Managing spinal deformities in young children is challenging, particularly early onset scoliosis (EOS). Surgical intervention is often required if EOS has been unresponsive to conservative treatment particularly with rapidly progressive curves. An emerging treatment option for EOS is fusionless scoliosis surgery. Similar to bracing, this surgical option potentially harnesses growth, motion and function of the spine along with correcting spinal deformity. Dual growing rods are one such fusionless treatment, which aims to modulate growth of the vertebrae. The aim of this study was to ascertain the extent to which semiconstrained growing rods (Medtronic, Sofamor, Danek, Memphis, TN) with a telescopic sleeve component, reduce rotational constraint on the spine compared with standard "constrained / rigid" rods and hence potentially provide a more physiological mechanical environment for the growing spine. METHODS Six 40-60kg English Large White porcine spines served as a model for the paediatric human spine. Each spine was dissected into a 7 level thoracolumbar multi-segment unit (MSU), removing all non-ligamentous soft tissues and leaving 3cm of ribs either side. Pure nondestructive axial rotation moments of ±4Nm at a constant rotation rate of 8deg.s-1 were applied to the mounted MSU spines using a biaxial Instron testing machine. Displacement of each vertebral level was captured using a 3D motion tracking system (Optotrak 3020, Northern Digital Inc, Waterloo, ON). Each spine was tested in an un-instrumented state first and then with appropriately sized semi-constrained growing rods and rigid rods in alternating sequence. The rods were secured by multi-axial pedicle screws (Medtronic CD Horizon) at levels 2 and 6 of the construct. The range of motion (ROM), neutral zone (NZ) size and stiffness (Nm.deg-1) were calculated from the Instron load-displacement data and intervertebral ROM was calculated through a MATLAB algorithm from Optotrak data. RESULTS Irrespective of the order of testing, rigid rods significantly reduced the total ROM compared with semi-constrained rods (p<0.05) with in a significantly stiffer spine for both left and right axial rotation (p<0.05). Analysing the intervertebral motion within the instrumented levels 2-6, rigid rods showed reduced ROM compared with semi-constrained growing rods and compared with un-instrumented motion segments. CONCLUSION Semi-constrained growing rods maintain similar stiffness in axial rotation to un-instrumented spines, while dual rigid rods significantly reduce axial rotation. Clinically the effect of semi-constrained growing rods as observed in this study is that they would be expected to allow growth via the telescopic rod components while maintaining the axial flexibility of the spine, which may reduce occurrence of the crankshaft phenomenon.

A biomechanical analysis of growing rods used in the management of early onset scoliosis

INTRODUCTION Managing spinal deformities in young children is challenging, particularly early-onset scoliosis (EOS). Any progressive spinal deformity particularly in early life presents significant health risks for the child and a challenge for the treating surgeon. Surgical intervention is often required if EOS has been unresponsive to conservative treatment particularly with rapidly progressive curves. An emerging treatment option particularly for EOS is fusionless scoliosis surgery. Similar to bracing this surgical option potentially harnesses growth, motion and function of the spine along with correcting spinal deformity. Dual growing rods is one such fusionless treatment, which aims to modulate growth of the vertebrae. The aim of this study was to ascertain the extent to which semi-constrained growing rods (Medtronic, Memphis, TN) with a telescopic sleeve component, reduce rotational constraint on the spine compared with standard rigid rods and hence potentially provide a more physiological mechanical environment for the growing spine. METHODS Six 40-60kg English Large White porcine spines served as a model for the paediatric human spine. Each spine was dissected into 7 level thoracolumbar multi-segment unit (MSU) spines, removing all non-ligamentous soft tissues. Appropriately sized semi-constrained growing rods and rigid rods were secured by multi-axial screws (Medtronic) prior to testing in alternating sequences for each spine. Pure nondestructive moments of +/4Nm at a constant rotation rate of 8deg/s was applied to the mounted MSU spines. Displacement of each level was captured using an Optotrak (Northern Digital Inc, Waterloo, ON). The range of motion (ROM), neutral zone (NZ) size and stiffness (Nm/deg) were calculated from the Instron load-displacement data and intervertebral ROM was calculated through a MATLAB algorithm from Optotrak data. RESULTS Irrespective of sequence order rigid rods significantly reduced the total ROM (deg) than compared to semi-constrained rods (p<0.05) and resulted in a significantly stiffer (Nm/deg) spine for both left and right axial rotation testing (p<0.05). Analysing the intervertebral motion within the instrumented levels, rigid rods showed reduced ROM (Deg) than compared to semi-constrained growing rods and the un-instrumented (UN-IN) test sequences. CONCLUSION The semi-constrained growing rods maintained rotation similar to UN-IN spines while the rigid rods showed significantly reduced axial rotation across all instrumented levels. Clinically the effect of semi-constrained growing rods evaluated in this study is that they will allow growth via the telescopic rod components while maintaining the axial rotation ability of the spine, which may also reduce the occurrence of the crankshaft phenomenon.

Growing rod analysis for the fusionless correction of early onset scoliosis (EOS)

Managing spinal deformities in young children is challenging, particularly early onset scoliosis (EOS). Surgical intervention is often required if EOS has been unresponsive to conservative treatment particularly with rapidly progressive curves. An emerging treatment option for EOS is fusionless scoliosis surgery. Similar to bracing, this surgical option potentially harnesses growth, motion and function of the spine along with correcting spinal deformity. Dual growing rods are one such fusionless treatment, which aims to modulate growth of the vertebrae. The aim of this study was to ascertain the extent to which semi-constrained growing rods (Medtronic Sofamor Danek Memphis, TN, USA) with a telescopic sleeve component, reduce rotational constraint on the spine compared with standard rigid rods and hence potentially provide a more physiological mechanical environment for the growing spine. This study found that semi-constrained growing rods would be expected to allow growth via the telescopic rod components while maintaining the axial flexibility of the spine and the improved capacity for final correction.

The High Court of Australia and the Marlboro Man: The Battle Over the Plain Packaging of Tobacco Products

In 2012, the High Court of Australia handed down a landmark decision on the plain packaging of tobacco products. This chapter considers the historic ruling in the case of JT International SA v Commonwealth; British American Tobacco Australasia Ltd v Commonwealth. This chapter explores several themes in the decision. First, it highlights the historical work by the High Court of Australia on the role of health regulation, the use of health warnings, and tobacco control. Second, the chapter considers the High Court of Australia's view that intellectual property law promotes the public interest.Third, it explores the High Court of Australia’s analysis of the constitutional law on acquisition of property on just terms. Finally, this chapter contends that the High Court of Australia's ruling on plain packaging of tobacco products will spark an 'Olive Revolution' — and will encourage superior courts and policy-makers to follow suit.

Baron de Hirsch Fund records undated, 1870-1991.

Contains Deed of Trust, By-Laws, Annual Reports, Corporation Minutes (1909, 1913-1919, 1923-1924, 1926-1933), Minutes of the Board of Trustees (1893, 1899, 1907, 1910, 1915-1916, 1918, 1923, 1926-1927, 1930-1933), and the minutes, correspondence, and reports of the various national and local committees. Financial materials include income and expenditure records (1891-1933), audits (1919-1923, 1926-1928), the records of agricultural loans and mortgages, bond and real estate holdings, and bequests. Includes also correspondence and other materials regarding the establishment of the Fund, correspondence of and other papers concerning the Baron and Baroness de Hirsch, and several histories of the Fund. Included in the wide range of activities are material on the work of the Agriculture Bureau and the Jewish Agriculture Society, Housing, English Classes, Immigration (including monthly reports for several ports of entry 1885-1916) and Immigrant Aid, German Refugee Aid in the early years of the Holocaust, Kings Park, N.Y. Test Farm, the Laundry Project, Peekskill Farm, Public Baths, Student Loans, the Baron de Hirsch Trade School, and the Woodbine Colony and Baron De Hirsch Agricultural & Industrial School. Contains also materials on the Colonization attempts made in Colorado, Connecticut, Florida, Louisiana, Michigan, Minnesota, North Dakota, New Jersey, New York, Pennsylvania, South Dakota, Galveston, Texas, The Southwest, Washington, Canada, and Mexico.

Foreign Capital and Finland : Central government's first period of reliance on international financial markets, 1862-1938

The main objective of the study is to evaluate the Finnish central government s foreign borrowing between the years 1862 and 1938. Most of this period was characterised by deep capital market integration that bears resemblance to the liberal world financial order at the turn of the millennium. The main aim is to analyse the credit risk associated with the state and its determination by evaluating the world financial market centres perception of Finland. By doing this, the study is also expected to provide an additional dimension to Finland s political and economic history by incorporating into the research the assessments of international capital markets regarding Finland during a period that witnessed profound political and economic changes in Finnish society. The evaluation of the credit risk mainly relies on exchange-rate risk free time series of the state s foreign bonds. They have been collected from quotations in the stock exchanges in Helsinki, Hamburg, Paris and London. In addition, it investigates Finland s exposure to short-term debt and Moody s credit ratings assigned to Finland. The study emphasises the importance of the political risk. It suggests that the hey-day of the state s reliance on foreign capital markets took place during last few decades of the 19th century when Finland enjoyed a wide autonomy in the Russian Empire and prudently managed its economy, highlighted in Finland s adherence to the international gold standard. Political confrontations in Finland and, in particular, in Russia and the turbulence of the world financial system prevented the return of this beneficial position again. Through its issuance of foreign bonds the state was able to import substantial amounts of foreign capital, which was sorely needed to foster economic development in Finland. Moreover, the study argues that the state s presence in the western capital markets not only had economic benefits, but it also increased the international awareness of Finland s distinct and separate status in the Russian Empire and later underlined its position as an independent republic.

Peftjauawybast, king of Nen-nesut : genealogy, art history, and the chronology of late libyan Egypt

This paper argues in detail for the identification of Peftjauawybast, King of Nen-nesut (fl. 728/720 BC ), with Peftjauawybast, High Priest of Ptah in Memphis (fl. c. 790–780 BC2), known from the Apis stela of year 28 of Shoshenq III. This identification ties in with a significant lowering of the accepted dates for the kings from Shoshenq III, Osorkon III and Takeloth III to Shoshenq V, and the material culture associated with them. Such a shift seems to be supported by stylistic and genealogical evidence. As a consequence, it is further suggested that the Master of Shipping at Nen-nesut, Pediese i, was perhaps related by descent and marriage to the family of the High Priests of Memphis and King Peftjauawybast.

Sex ratios of Metapenaeus kutchensis George, George and Rao, 1963 and Parapenaeopsis sculptilis (Heller, 1862) in the Gulf of Kachchh, Western India

Sex ratio data of two species of penaeid prawns Metapenaues kutchensis George, George and Rao, 1963 and Parapenaeopsis sculptilis (Heller, 1862), occurring in the Gulf of Kachchh, were statistically analysed. A preponderance of females was observed in both the species and the ratio of male to female for both years combined for M. kutchensis and P. sculptilis was found to be 1:15 and 1:2.7, respectively. Chi-square analysis revealed significant difference in the sex ratio of the two species.