Management of urban mobility to control climate change in cities in Spain

The need to decarbonize urban mobility is one of the main motivations for all countries to achieve reduction targets for greenhouse gas (GHG) emissions. In general, the transport modes that have experienced the most growth in recent years tend to be the most polluting. Most efforts have focused on improvements in vehicle efficiency and on the renewal of vehicle fleets; more emphasis should be placed on strategies related to the management of urban mobility and modal share. Research of individual travel that analyzes carbon dioxide (CO2) emissions and car and public transport share in daily mobility will enable better assessments of the potential of urban mobility measures introduced to limit GHG emissions produced by transport in cities. The climate change impacts of daily mobility in Spain are explored with data from two national travel surveys in 2000 and 2006, and a method for estimating the CO2 emissions associated with each journey and each surveyed individual is provided. The results demonstrate that from 2000 to 2006, daily mobility has increased and has led to a 17% increase in CO2 emissions. When these results are separated by transport mode, cars prove to be the main contributor to that increase, followed by public transport. More focus should be directed toward modal shift strategies, which take into account not only the number of journeys but also the distance traveled. These contributions have potential applications in the assessment of current and future urban transport policies related to low-carbon urban transportation.

Characterisation of laser hybrid welded dissimilar joints

The investigation addresses the over-all performance of dissimilar joints of low carbon steel and stainless steel thin sheets achieved by laser hybrid welding. First, the technological de-velopment of dissimilar laser hybrid welding of thin sheets is briefly pre-sented. Joint characterisation by means of macro and microstructural examination and hardness tests is fur-ther described. Microhardness testing was used as an alternative and effi-cient mean of assessing the changes in mechanical properties of difficult to characterize areas, like HAZ and fu-sion zone of these thin sheets Laser-GMA dissimilar welded joints. The overall tensile performance of the joint is discussed together with the weld metal strength overmatching. The ten-sile tests results indicate that in case of transversally loaded joints, the po-sitive difference in yield strength between the weld metal and the base materials (overmatching welds) may reduce the weight of the structure, without diminishing its strength.

Residual stress distribution in ferritic to austenitic steel joints made by laser welding,

In this study, autogenous laser welding was used to join thin plates of low carbon ferritic and austenitic stainless steel. Due to the differences in the thermo-physical properties of base metals, this kind of weld exhibits a complex microstructure, which frequently leads to an overall loss of joint quality. Four welded samples were prepared by using different sets of processing parameters, with the aim of minimizing the induced residual stress field. The dissimilar austenitic-ferritic joints obtained under all welding conditions were uniform and free of defects. Variations in beam position did not influence the weld geometiy, which is a typical keyhole welding. Microstructural characterization and residual strain scanning (by neutron diffraction) were used to assess the features of the joints. By varying laser beam power density and by displacing the laser beam towards the carbon steel side, an optimum combination of processing parameters was found.

Effects of soluble humic acids on the uptake of heavy metals by Vetiveria zizanioides (L.) Nash in contaminated mining soils

In the past, mining wastes were left wherever they might lie in the surroundings of the mine area. Unfortunately, inactive and abandoned mines continue to pollute our environment, reason why these sites should be restored with minimum impact. Phytoextraction is an environmental-friendly and cost-effective technology less harmful than traditional methods that uses metal hyperaccumulator or at least tolerant plants to extract heavy metals from polluted soils. One disadvantage of hyperaccumulator species is their slow growth rate and low biomass production. Vetiveria zizanioides (L.) Nash, perennial species adapted to Mediterranean climate has a strong root system which can reach up to 3 m deep, is fast growing, and can survive in sites with high metal levels (Chen et al., 2004). Due to the fact that metals in abandoned mine tailings become strongly bonded to soil solids, humic acids used as chelating agents could increase metal bioavailability (Evangelou et al., 2004; Wilde et al., 2005) and thereby promote higher accumulation in the harvestable parts of the plant. The objective of this study was to examine the performance of humic acid assisted phytoextraction using Vetiveria zizanioides (L.) Nash in heavy metals contaminated soils.

Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding

The present investigation addresses the overall and local mechanical performance of dissimilar joints of low carbon steel (CS) and stainless Steel (SS) thin sheets achieved by laser welding in case of heat source displacement from the weld gap centreline towards CS. Welding was performed on a Nd:YAG laser DY033 (3300 W) in a continuos wave (CW), keyhole mode. The tensile behavior of the joint different zones assessed by using a video-image based system (VIC-2D) reveals that the residual stress field, together with the positive difference in yield between the weld metal and the base materials protects the joint from being plastically deformed. The tensile loadings of flat transverse specimens generate the strain localization and failure in CS, far away from the weld.

Abordagem tecnológica da síntese de carbonato de glicerila: ensaios físico-químicos, espectroscópicos e viabilidade econômica

Este trabalho trata da proposta para a produção carbonato de glicerila como continuação de trabalho de Mestrado. Propõe-se estabelecer uma sequência para a obtenção e a purificação do produto, que envolve remoção e o aproveitamento de amônia e a remoção de eletrólitos, bem como a utilização de novos catalisadores. De maneira geral, análises espectrofotométricas demonstraram que o produto purificado apresentou características semelhantes às da especificação constante de produto já existente no mercado cedido para comparação (JEFFSOL®, Huntsman). Além disso, foi calculado o custo de produção tanto em escala laboratorial como em escala industrial. Análises de Ressonância Magnética Nuclear e Cromatografia a Gás, aliadas à Espectrofotometria no Infravermelho permitiram avaliar tanto a evolução das reações, bem como os rendimentos reacionais. Foi demonstrada a aplicabilidade das técnicas de RMN 1H e 13C para o cálculo dos rendimentos reacionais, bem como para a elucidação dos mecanismos reacionais. A partir de análises em escala laboratorial, foi possível verificar que, para as condições reacionais estudadas foram obtidas baixas conversões da glicerina e baixas seletividades para o carbonato de glicerila. E ainda, o sulfato de zinco apresentou o melhor desempenho. É importante salientar que, mesmo para baixas conversões, sua produção ainda é economicamente viável devido ao seu elevado valor de mercado. O estudo da produção em escala industrial contemplou a síntese de fluxograma de processo e posterior simulação, incluindo o dimensionamento dos principais equipamentos de processo para fins de análise econômica, via calculo de custos de capital (CAPEX) e operacionais (OPEX). Os resultados indicaram viabilidade econômica do projeto, sendo demonstrado que a implantação de uma nova unidade de produção de carbonato de glicerila pode ser bastante rentável mesmo para baixos rendimentos. O produto obtido possui diversas e interessantes aplicações cosméticas e farmacêuticas, principalmente por ser um tensoativo não iônico, de baixa toxicidade, biodegradável e produzido a partir de fontes renováveis. Assim, o carbonato de glicerila produzido é uma interessante forma de aproveitamento da glicerina proveniente da fabricação de biodiesel.

Brazilian climate policy since 2005: continuity, change and prospective. CEPS Working Document No. 373, February 2013

In the five-year period 2005-09, Brazil has dramatically reduced carbon emissions by around 25% and at the same time has kept a stable economic growth rate of 3.5% annually. This combination of economic growth and emissions reduction is unique in the world. The driver was a dramatic reduction in deforestation in the Amazonian forest and the Cerrado Savannah. This shift empowered the sustainability social forces in Brazil to the point that the national Congress passed (December 2009) a very progressive law internalising carbon constraints and promoting the transition to a low-carbon economy. The transformation in Brazil’s carbon emissions profile and climate policy has increased the potentialities of convergence between the European Union and Brazil. The first part of this paper examines the assumption on which this paper is based, mainly that the trajectory of carbon emissions and climate/energy policies of the G20 powers is much more important than the United Nations multilateral negotiations for assessing the possibility of global transition to a low-carbon economy. The second part analyses Brazil’s position in the global carbon cycle and public policies since 2005, including the progressive shift in 2009 and the contradictory dynamic in 2010-12. The final part analyses the potential for a transition to a low-carbon economy in Brazil and the impact in global climate governance.

EU Policy on Climate Change Mitigation since Copenhagen and the Economic Crisis. CEPS Working Document No. 380, 5 March 2013

The EU has long assumed leadership in advancing domestic and international climate change policy. While pushing its partners in international negotiations, it has led the way in implementing a host of domestic measures, including a unilateral and legally binding target, an ambitious policy on renewable energy and a strategy for low-carbon technology deployment. The centrepiece of EU policy, however, has been the EU Emissions Trading System (ETS), a cap-and-trade programme launched in 2005. The ETS has been seen as a tool to ensure least-cost abatement, drive EU decarbonisation and develop a global carbon market. After an initial review and revision of the ETS, to come into force in 2013, there was a belief that the new ETS was ‘future-proof’, meaning able to cope with the temporary lack of a global agreement on climate change and individual countries’ emission ceilings. This confidence has been shattered by the simultaneous ‘failure’ of Copenhagen to deliver a clear prospect of a global (top-down) agreement and the economic crisis. The lack of prospects for national caps at the international level has led to a situation whereby many member states hesitate to pursue ambitious climate change policies. In the midst of this, the EU is assessing its options anew. A number of promising areas for international cooperation exist, all centred on the need to ‘raise the ambition level’ of GHG emission reductions, notably in aviation and maritime, short-lived climate pollutions, deforestation, industrial competitiveness and green growth. Public policy issues in the field of technology and its transfer will require more work to identify real areas for cooperation.

You'd better bet on the ETS. Bruegel Policy Brief 2013/02, April 2013

The issue: The European Union's emissions trading system (ETS), introduced in 2005, is the centerpiece of EU decarbonisation efforts and the biggest emissions trading scheme in the world. After a peak in May 2008, the price of ETS carbon allowances started to collapse, and industry, civil society and policymakers began to think about how to ‘repair the ETS’. However, the ETS is an effective and efficient tool to mitigate greenhouse gas emissions, and although prices have not been stable, it has evolved to cover more sectors and greenhouse gases, and to become more robust and less distorting. Prices are depressed because of an interplay of fundamental factors and a lack of confidence in the system. Policy challenge The ETS must be stabilised by reinforcing the credibility of the system so that the use of existing low-carbon alternatives (for example burning gas instead of coal) is incentivised and investment in low-carbon assets is ensured. Further-more, failure to reinvigorate the ETS might compromise the cost-effective synchronisation of European decarbonisation efforts across sectors and countries. To restore credibility and to ensure long-term commitment to the ETS, the European Investment Bank should auction guarantees on the future emission allowance price.This will reduce the risk for low-carbon investments and enable stabilisation of the ETS until a compromise is found on structural measures to reinforce it in order to achieve the EU's long-term decarbonisation targets.

When and how to support renewables? Letting the data speak. Bruegel Working Paper 2014/01, February 2014

Low-carbon energy technologies are pivotal for decarbonising our economies up to 2050 while ensuring secure and affordable energy. Consequently, innovation that reduces the cost of low-carbon energy would play an important role in reducing transition costs. We assess the two most prominent innovation policy instruments (i) public research, development and demonstration (RD&D) subsidies and (ii) public deployment policies. Our results indicate that both deployment and RD&D coincide with increasing knowledge generation and the improved competitiveness of renewable energy technologies. We find that both support schemes together have a greater effect that they would individually, that RD&D support is unsurprisingly more effective in driving patents and that timing matters. Current wind deployment based on past wind RD&D spending coincides best with wind patenting. If we look into competitiveness we find a similar picture, with the greatest effect coming from deployment. Finally, we find significant cross-border effects, especially for winddeployment. Increased deployment in one country coincides with increased patenting in nearby countries. Based on our findings we argue that both deployment and RD&D support are needed to create innovation in renewable energy technologies. However, we worry that current support is unbalanced. Public spending on deployment has been two orders of magnitude larger (in 2010 about €48 billion in the five largest EU countries in 2010) than spending on RD&D support (about €315 million). Consequently, basing the policy mix more on empirical evidence could increase the efficiency of innovation policy targeted towards renewable energy technologies.

The Potential Evolution of the European Energy System to 2020 and 2050. CEPS Working Document No. 392, 26 March 2014

This paper assesses the impact of decarbonisation of the energy sector on employment in Europe. Setting the stage for such an assessment, the paper provides an analysis of possible pathways to decarbonise Europe’s energy system, taking into account EU greenhouse gas emissions reduction targets for 2020 and 2050. It pays particular attention to various low-carbon technologies that could be deployed in different regions of the EU. It concludes that efficiency and renewables play a major role in any decarbonisation scenario and that the power sector is the main enabler for the transition to a low-carbon economy in Europe, despite rising electricity demand. The extent of the decline in the share of fossil fuels will largely depend on the existence of carbon capture and storage (CCS), which remains a major source of uncertainty.

German companies strengthen their cooperation with Russian gas suppliers. OSW Commentary No. 64, 2011-10-24

Germany’s decision to give up the use of nuclear energy will force it to find a conventional low-carbon energy source as a replacement; in the short term, in addition to coal, this is likely to be gas. Due to their continued high debt and the losses associated with the end of atomic power, German companies will not be able to spend large funds on investing in conventional energy. First of all, they will aim to raise capital and repay their debts. The money for this will come from selling off their less profitable assets; this will include sales on the gas market. This will create opportunities for natural gas exporters and extraction companies such as Gazprom to buy back some of the German companies’ assets (electricity companies, for example). The German companies will probably continue to seek to recover the costs incurred in the investment projects already underway, such as Nord Stream, the importance of which will grow after Russian gas imports increase. At the same time, because of their debts, the German companies will seek to minimise their investment costs by selling some shares on the conventional energy market, to Russian corporations among others; the latter would thus be able to increase their stake in the gas market in both Western (Germany, Great Britain, the Benelux countries) and Central Europe (Poland, the Czech Republic). It is possible that while establishing the details of cooperation between the Russian and German companies, Russia will try to put pressure on Germany to give up competing projects such as Nabucco. However, a well-diversified German energy market should be able to defend itself against attempts to increase German dependence on Russian gas supplies and the dictates of high prices.

EU Policies and Cluster Developments of Hydrogen Communities. Bruges European Economic Research (BEER) Papers 14/December 2008

This study takes on the issue of political and socio-economic conditions for the hydrogen economy as part of a future low carbon society in Europe. It is subdivided into two parts. A first part reviews the current EU policy framework in view of its impact on hydrogen and fuel cell development. In the second part an analysis of the regional dynamics and possible hydrogen and fuel cell clusters is carried out. The current EU policy framework does not hinder hydrogen development. Yet it does not constitute a strong push factor either. EU energy policies have the strongest impact on hydrogen and fuel cell development even though their potential is still underexploited. Regulatory policies have a weak but positive impact on hydrogen. EU spending policies show some inconsistencies. Regions with a high activity level in HFC also are generally innovative regions. Moreover, the article points out certain industrial clusters that favours some regions' conditions for taking part in the HFC development. However, existing hydrogen infrastructure seems to play a minor role for region's engagement. An overall well-functioning regional innovation system is important in the formative phase of an HFC innovation system, but that further research is needed before qualified policy implications can be drawn. Looking ahead the current policy framework at EU level does not set clear long term signals and lacks incentives that are strong enough to facilitate high investment in and deployment of sustainable energy technologies. The likely overall effect thus seems to be too weak to enable the EU hydrogen and fuel cell deployment strategy. According to our analysis an enhanced EU policy framework pushing for sustainability in general and the development of hydrogen and fuel cells in particular requires the following: 1) A strong EU energy policy with credible long term targets; 2) better coordination of EU policies: Europe needs a common understanding of key taxation concepts (green taxation, internalisation of externalities) and a common approach for the market introduction of new energy technologies; 3) an EU cluster policy as an attempt to better coordinate and support of European regions in their efforts to further develop HFC and to set up the respective infrastructure.

System Costs of Variable Renewable Energy in the European Union. Bruges European Economic Policy (BEEP) Briefings 37/2015

To shift to a low-carbon economy, the EU has been encouraging the deployment of variable renewable energy sources (VRE). However, VRE lack of competitiveness and their technical specificities have substantially raised the cost of the transition. Economic evaluations show that VRE life-cycle costs of electricity generation are still today higher than those of conventional thermal power plants. Member States have consequently adopted dedicated policies to support them. In addition, Ueckerdt et al. (2013) show that when integrated to the power system, VRE induce supplementary not-accounted-for costs. This paper first exposes the rationale of EU renewables goals, the EU targets and current deployment. It then explains why the LCOE metric is not appropriate to compute VRE costs by describing integration costs, their magnitude and their implications. Finally, it analyses the consequences for the power system and policy options. The paper shows that the EU has greatly underestimated VRE direct and indirect costs and that policymakers have failed to take into account the burden caused by renewable energy and the return of State support policies. Indeed, induced market distortions have been shattering the whole power system and have undermined competition in the Internal Energy Market. EU policymakers can nonetheless take full account of this negative trend and reverse it by relying on competition rules, setting-up a framework to collect robust EU-wide data, redesigning the architecture of the electricity system and relying on EU regulators.

General responses of Thoracosphaera heimii grown under a range of pCO2

Ocean acidification is considered a major threat to marine ecosystems and may particularly affect calcifying organisms such as corals, foraminifera and coccolithophores. Here we investigate the impact of elevated pCO2 and lowered pH on growth and calcification in the common calcareous dinoflagellate Thoracosphaera heimii. We observe a substantial reduction in growth rate, calcification and cyst stability of T. heimii under elevated pCO2. Furthermore, transcriptomic analyses reveal CO2 sensitive regulation of many genes, particularly those being associated to inorganic carbon acquisition and calcification. Stable carbon isotope fractionation for organic carbon production increased with increasing pCO2 whereas it decreased for calcification, which suggests interdependence between both processes. We also found a strong effect of pCO2 on the stable oxygen isotopic composition of calcite, in line with earlier observations concerning another T. heimii strain. The observed changes in stable oxygen and carbon isotope composition of T. heimii cysts may provide an ideal tool for reconstructing past seawater carbonate chemistry, and ultimately past pCO2. Although the function of calcification in T. heimii remains unresolved, this trait likely plays an important role in the ecological and evolutionary success of this species. Acting on calcification as well as growth, ocean acidification may therefore impose a great threat for T. heimii.