The role of texture amplitude in shape from shading: evidence from a haptic matching task

The pattern of illumination on an undulating surface can be used to infer its 3-D form (shape from shading). But the recovery of shape would be invalid if the shading actually arose from reflectance variation. When a corrugated surface is painted with an albedo texture, the variation in local mean luminance (LM) due to shading is accompanied by a similar modulation in texture amplitude (AM). This is not so for reflectance variation, nor for roughly textured surfaces. We used a haptic matching technique to show that modulations of texture amplitude play a role in the interpretation of shape from shading. Observers were shown plaid stimuli comprising LM and AM combined in-phase (LM+AM) on one oblique and in anti-phase (LM-AM) on the other. Stimuli were presented via a modified ReachIN workstation allowing the co-registration of visual and haptic stimuli. In the first experiment, observers were asked to adjust the phase of a haptic surface, which had the same orientation as the LM+AM combination, until its peak in depth aligned with the visually perceived peak. The resulting alignments were consistent with the use of a lighting-from-above prior. In the second experiment, observers were asked to adjust the amplitude of the haptic surface to match that of the visually perceived surface. Observers chose relatively large amplitude settings when the haptic surface was oriented and phase-aligned with the LM+AM cue. When the haptic surface was aligned with the LM-AM cue, amplitude settings were close to zero. Thus the LM/AM phase relation is a significant visual depth cue, and is used to discriminate between shading and reflectance variations. [Supported by the Engineering and Physical Sciences Research Council, EPSRC].

Energy conservation measures on an industrial site

World and UK energy resources and use are reviewed and the role of energy conservation in energy policy identified. In considering various energy conservation measures, a distinction is made between energy intensive and non-intensive industries and also between direct and indirect uses of energy. Particular attention is given to the non-intensive user of energy. Energy use on one such industrial site has been studied to determine the most effective energy saving measures in the short term. Here it is estimated that over 65% of energy is consumed for indirect purposes, mainly for heating and lighting buildings. Emphasis is placed on energy auditing techniques and those energy saving measures requiring greater technical, economic and organisational resources to secure their implementation. Energy auditing techniques include the use of aerial thermography and snow formation surveys to detect heat losses. Qualitative and quantitative interpretations are carried out, but restricted mainly to evaluating building roof heat losses. From the energy auditing exercise, it is confirmed that the intermittent heating of buildings is the largest and most cost effective fuel saving measure. This was implemented on the site and a heat monitoring programme established to verify results. Industrial combined heat and power generation is investigated. A proposal for the site demonstrates that there are several obstacles to its successful implementation. By adopting an alternative financial rationale, a way of overcoming these obstacles is suggested. A useful by-product of the study is the classification of industrial sites according to the nature of industrial energy demand patterns. Finally, energy saving measures implemented on the site are quantlfied using comparative verification methods. Overall fuel savings of 13% are indicated. Cumulative savings in heating fuel amount to 26% over four years although heated area increased by approximately 25%.

Une étude générique du metteur en scène au théâtre:son émergence et son rôle moderne et contemporain

The theatre director (metteur en scene in French) is a relatively new figure in theatre practice. It was not until the I820s that the term 'mise en scene' gained currency. The term 'director' was not in general use until the I880s. The emergence and the role of the director has been considered from a variety of perspectives, either through the history of theatre (Allevy, Jomaron, Sarrazac, Viala, Biet and Triau); the history of directing (Chinoy and Cole, Boll, Veinstein, Roubine); semiotic approaches to directing (Whitmore, Miller, Pavis); the semiotics of performance (De Marinis); generic approaches to the mise en scene (Thomasseau, Banu); post-dramatic approaches to theatre (Lehmann); approaches to performance process and the specifics of rehearsal methodology (Bradby and Williams, Giannachi and Luckhurst, Picon-Vallin, Styan). What the scholarly literature has not done so far is to map the parameters necessarily involved in the directing process, and to incorporate an analysis of the emergence of the theatre director during the modem period and consider its impact on contemporary performance practice. Directing relates primarily to the making of the performance guided by a director, a single figure charged with the authority to make binding artistic decisions. Each director may have her/his own personal approaches to the process of preparation prior to a show. This is exemplified, for example, by the variety of terms now used to describe the role and function of directing, from producer, to facilitator or outside eye. However, it is essential at the outset to make two observations, each of which contributes to a justification for a generic analysis (as opposed to a genetic approach). Firstly, a director does not work alone, and cooperation with others is involved at all stages of the process. Secondly, beyond individual variation, the role of the director remains twofold. The first is to guide the actors (meneur de jeu, directeur d'acteurs, coach); the second is to make a visual representation in the performance space (set designer, stage designer, costume designer, lighting designer, scenographe). The increasing place of scenography has brought contemporary theatre directors such as Wilson, Castellucci, Fabre to produce performances where the performance space becomes a semiotic dimension that displaces the primacy of the text. The play is not, therefore, the sole artistic vehicle for directing. This definition of directing obviously calls for a definition of what the making of the performance might be. The thesis defines the making of the performance as the activity of bringing a social event, by at least one performer, providing visual and/or textual meaning in a performance space. This definition enables us to evaluate four consistent parameters throughout theatre history: first, the social aspect associated to the performance event; second, the devising process which may be based on visual and/or textual elements; third, the presence of at least one performer in the show; fourth, the performance space (which is not simply related to the theatre stage). Although the thesis focuses primarily on theatre practice, such definition blurs the boundaries between theatre and other collaborative artistic disciplines (cinema, opera, music and dance). These parameters illustrate the possibility to undertake a generic analysis of directing, and resonate with the historical, political and artistic dimensions considered. Such a generic perspective on the role of the director addresses three significant questions: an historical question: how/why has the director emerged?; a sociopolitical question: how/why was the director a catalyst for the politicisation of theatre, and subsequently contributed to the rise of State-funded theatre policy?; and an artistic one: how/why the director has changed theatre practice and theory in the twentieth-century? Directing for the theatre as an artistic activity is a historically situated phenomenon. It would seem only natural from a contemporary perspective to associate the activity of directing to the function of the director. This is relativised, however, by the question of how the performance was produced before the modern period. The thesis demonstrates that the rise of the director is a progressive and historical phenomenon (Dort) rather than a mere invention (Viala, Sarrazac). A chronological analysis of the making of the performance throughout theatre history is the most useful way to open the study. In order to understand the emergence of the director, the research methodology assesses the interconnection of the four parameters above throughout four main periods of theatre history: the beginning of the Renaissance (meneur de jeu), the classical age (actor-manager and stage designer-manager), the modern period (director) and the contemporary period (director-facilitator, performer). This allows us properly to appraise the progressive emergence of the director, as well as to make an analysis of her/his modern and contemporary role. The first chapter argues that the physical separation between the performance space and its audience, which appeared in the early fifteenth-century, has been a crucial feature in the scenographic, aesthetic, political and social organisation of the performance. At the end of the Middle Ages, French farces which raised socio-political issues (see Bakhtin) made a clear division on a single outdoor stage (treteau) between the actors and the spectators, while religious plays (drame fiturgique, mystere) were mostly performed on various outdoor and opened multispaces. As long as the performance was liturgical or religious, and therefore confined within an acceptable framework, it was allowed. At the time, the French ecclesiastical and civil authorities tried, on several occasions, to prohibit staged performances. As a result, practitioners developed non-official indoor spaces, the Theatre de fa Trinite (1398) being the first French indoor theatre recognized by scholars. This self-exclusion from the open public space involved breaking the accepted rules by practitioners (e.g. Les Confreres de fa Passion), in terms of themes but also through individual input into a secular performance rather than the repetition of commonly known religious canvases. These developments heralded the authorised theatres that began to emerge from the mid-sixteenth century, which in some cases were subsidised in their construction. The construction of authorised indoor theatres associated with the development of printing led to a considerable increase in the production of dramatic texts for the stage. Profoundly affecting the reception of the dramatic text by the audience, the distance between the stage and the auditorium accompanied the changing relationship between practitioners and spectators. This distance gave rise to a major development of the role of the actor and of the stage designer. The second chapter looks at the significance of both the actor and set designer in the devising process of the performance from the sixteenth-century to the end of the nineteenth-century. The actor underwent an important shift in function in this period from the delivery of an unwritten text that is learned in the medieval oral tradition to a structured improvisation produced by the commedia dell 'arte. In this new form of theatre, a chef de troupe or an experienced actor shaped the story, but the text existed only through the improvisation of the actors. The preparation of those performances was, moreover, centred on acting technique and the individual skills of the actor. From this point, there is clear evidence that acting began to be the subject of a number of studies in the mid-sixteenth-century, and more significantly in the seventeenth-century, in Italy and France. This is revealed through the implementation of a system of notes written by the playwright to the actors (stage directions) in a range of plays (Gerard de Vivier, Comedie de la Fidelite Nuptiale, 1577). The thesis also focuses on Leoni de' Sommi (Quatro dialoghi, 1556 or 1565) who wrote about actors' techniques and introduced the meneur de jeu in Italy. The actor-manager (meneur de jeu), a professional actor, who scholars have compared to the director (see Strihan), trained the actors. Nothing, however, indicates that the actor-manager was directing the visual representation of the text in the performance space. From the end of the sixteenth-century, the dramatic text began to dominate the process of the performance and led to an expansion of acting techniques, such as the declamation. Stage designers carne from outside the theatre tradition and played a decisive role in the staging of religious celebrations (e.g. Actes des Apotres, 1536). In the sixteenth-century, both the proscenium arch and the borders, incorporated in the architecture of the new indoor theatres (theatre a l'italienne), contributed to create all kinds of illusions on the stage, principally the revival of perspective. This chapter shows ongoing audience demands for more elaborate visual effects on the stage. This led, throughout the classical age, and even more so during the eighteenth-century, to grant the stage design practitioner a major role in the making of the performance (see Ciceri). The second chapter demonstrates that the guidance of the actors and the scenographic conception, which are the artistic components of the role of the director, appear to have developed independently from one another until the nineteenth-century. The third chapter investigates the emergence of the director per se. The causes for this have been considered by a number of scholars, who have mainly identified two: the influence of Naturalism (illustrated by the Meiningen Company, Antoine, and Stanislavski) and the invention of electric lighting. The influence of the Naturalist movement on the emergence of the modem director in the late nineteenth-century is often considered as a radical factor in the history of theatre practice. Naturalism undoubtedly contributed to changes in staging, costume and lighting design, and to a more rigorous commitment to the harmonisation and visualisation of the overall production of the play. Although the art of theatre was dependent on the dramatic text, scholars (Osborne) demonstrate that the Naturalist directors did not strictly follow the playwright's indications written in the play in the late nineteenth-century. On the other hand, the main characteristic of directing in Naturalism at that time depended on a comprehensive understanding of the scenography, which had to respond to the requirements of verisimilitude. Electric lighting contributed to this by allowing for the construction of a visual narrative on stage. However, it was a master technician, rather than an emergent director, who was responsible for key operational decisions over how to use this emerging technology in venues such as the new Bayreuth theatre in 1876. Electric lighting reflects a normal technological evolution and cannot be considered as one of the main causes of the emergence of the director. Two further causes of the emergence of the director, not considered in previous studies, are the invention of cinema and the Symbolist movement (Lugne-Poe, Meyerhold). Cinema had an important technological influence on the practitioners of the Naturalist movement. In order to achieve a photographic truth on the stage (tableau, image), Naturalist directors strove to decorate the stage with the detailed elements that would be expected to be found if the situation were happening in reality. Film production had an influence on the work of actors (Walter). The filmmaker took over a primary role in the making of the film, as the source of the script, the filming process and the editing of the film. This role influenced the conception that theatre directors had of their own work. It is this concept of the director which influenced the development of the theatre director. As for the Symbolist movement, the director's approach was to dematerialise the text of the playwright, trying to expose the spirit, movement, colour and rhythm of the text. Therefore, the Symbolists disengaged themselves from the material aspect of the production, and contributed to give greater artistic autonomy to the role of the director. Although the emergence of the director finds its roots amongst the Naturalist practitioners (through a rigorous attempt to provide a strict visual interpretation of the text on stage), the Symbolist director heralded the modem perspective of the making of performance. The emergence of the director significantly changed theatre practice and theory. For instance, the rehearsal period became a clear work in progress, a platform for both developing practitioners' techniques and staging the show. This chapter explores and contrasts several practitioners' methods based on the two aspects proposed for the definition of the director (guidance of the actors and materialisation of a visual space). The fourth chapter argues that the role of the director became stronger, more prominent, and more hierarchical, through a more political and didactic approach to theatre as exemplified by the cases of France and Germany at the end of the nineteenth-century and through the First World War. This didactic perspective to theatre defines the notion of political theatre. Political theatre is often approached by the literature (Esslin, Willett) through a Marxist interpretation of the great German directors' productions (Reinhardt, Piscator, Brecht). These directors certainly had a great influence on many directors after the Second World War, such as Jean Vilar, Judith Molina, Jean-Louis Barrault, Roger Planchon, Augusto Boal, and others. This chapter demonstrates, moreover, that the director was confirmed through both ontological and educational approaches to the process of making the performance, and consequently became a central and paternal figure in the organisational and structural processes practiced within her/his theatre company. In this way, the stance taken by the director influenced the State authorities in establishing theatrical policy. This is an entirely novel scholarly contribution to the study of the director. The German and French States were not indifferent to the development of political theatre. A network of public theatres was thus developed in the inter-war period, and more significantly after the Second World War. The fifth chapter shows how State theatre policies establish its sources in the development of political theatre, and more specifically in the German theatre trade union movement (Volksbiihne) and the great directors at the end of the nineteenth-century. French political theatre was more influenced by playwrights and actors (Romain Rolland, Louise Michel, Louis Lumet, Emile Berny). French theatre policy was based primarily on theatre directors who decentralised their activities in France during both the inter-war period and the German occupation. After the Second World War, the government established, through directors, a strong network of public theatres. Directors became both the artistic director and the executive director of those institutionalised theatres. The institution was, however, seriously shaken by the social and political upheaval of 1968. It is the link between the State and the institution in which established directors were entangled that was challenged by the young emerging directors who rejected institutionalised responsibility in favour of the autonomy of the artist in the 1960s. This process is elucidated in chapter five. The final chapter defines the contemporary role of the director in contrasting thework of a number of significant young theatre practitioners in the 1960s such as Peter Brook, Ariane Mnouchkine, The Living Theater, Jerzy Grotowski, Augusto Boal, Eugenio Barba, all of whom decided early on to detach their companies from any form of public funding. This chapter also demonstrates how they promoted new forms of performance such as the performance of the self. First, these practitioners explored new performance spaces outside the traditional theatre building. Producing performances in a non-dedicated theatre place (warehouse, street, etc.) was a more frequent practice in the 1960s than before. However, the recent development of cybertheatre questions both the separation of the audience and the practitioners and the place of the director's role since the 1990s. Secondly, the role of the director has been multifaceted since the 1960s. On the one hand, those directors, despite all their different working methods, explored western and non-western acting techniques based on both personal input and collective creation. They challenged theatrical conventions of both the character and the process of making the performance. On the other hand, recent observations and studies distinguish the two main functions of the director, the acting coach and the scenographe, both having found new developments in cinema, television, and in various others events. Thirdly, the contemporary director challenges the performance of the text. In this sense, Antonin Artaud was a visionary. His theatre illustrates the need for the consideration of the totality of the text, as well as that of theatrical production. By contrasting the theories of Artaud, based on a non-dramatic form of theatre, with one of his plays (Le Jet de Sang), this chapter demonstrates how Artaud examined the process of making the performance as a performance. Live art and autobiographical performance, both taken as directing the se(f, reinforce this suggestion. Finally, since the 1990s, autobiographical performance or the performance of the self is a growing practical and theoretical perspective in both performance studies and psychology-related studies. This relates to the premise that each individual is making a representation (through memory, interpretation, etc.) of her/his own life (performativity). This last section explores the links between the place of the director in contemporary theatre and performers in autobiographical practices. The role of the traditional actor is challenged through non-identification of the character in the play, while performers (such as Chris Burden, Ron Athey, Orlan, Franko B, Sterlac) have, likewise, explored their own story/life as a performance. The thesis demonstrates the validity of the four parameters (performer, performance space, devising process, social event) defining a generic approach to the director. A generic perspective on the role of the director would encompass: a historical dimension relative to the reasons for and stages of the 'emergence' of the director; a socio-political analysis concerning the relationship between the director, her/his institutionalisation, and the political realm; and the relationship between performance theory, practice and the contemporary role of the director. Such a generic approach is a new departure in theatre research and might resonate in the study of other collaborative artistic practices.

Multiview photometric stereo

This paper addresses the problem of obtaining complete, detailed reconstructions of textureless shiny objects. We present an algorithm which uses silhouettes of the object, as well as images obtained under changing illumination conditions. In contrast with previous photometric stereo techniques, ours is not limited to a single viewpoint but produces accurate reconstructions in full 3D. A number of images of the object are obtained from multiple viewpoints, under varying lighting conditions. Starting from the silhouettes, the algorithm recovers camera motion and constructs the object's visual hull. This is then used to recover the illumination and initialize a multiview photometric stereo scheme to obtain a closed surface reconstruction. There are two main contributions in this paper: First, we describe a robust technique to estimate light directions and intensities and, second, we introduce a novel formulation of photometric stereo which combines multiple viewpoints and, hence, allows closed surface reconstructions. The algorithm has been implemented as a practical model acquisition system. Here, a quantitative evaluation of the algorithm on synthetic data is presented together with complete reconstructions of challenging real objects. Finally, we show experimentally how, even in the case of highly textured objects, this technique can greatly improve on correspondence-based multiview stereo results.

Self-calibrated, multi-spectral photometric stereo for 3D face capture

This paper addresses the problem of obtaining 3d detailed reconstructions of human faces in real-time and with inexpensive hardware. We present an algorithm based on a monocular multi-spectral photometric-stereo setup. This system is known to capture high-detailed deforming 3d surfaces at high frame rates and without having to use any expensive hardware or synchronized light stage. However, the main challenge of such a setup is the calibration stage, which depends on the lights setup and how they interact with the specific material being captured, in this case, human faces. For this purpose we develop a self-calibration technique where the person being captured is asked to perform a rigid motion in front of the camera, maintaining a neutral expression. Rigidity constrains are then used to compute the head's motion with a structure-from-motion algorithm. Once the motion is obtained, a multi-view stereo algorithm reconstructs a coarse 3d model of the face. This coarse model is then used to estimate the lighting parameters with a stratified approach: In the first step we use a RANSAC search to identify purely diffuse points on the face and to simultaneously estimate this diffuse reflectance model. In the second step we apply non-linear optimization to fit a non-Lambertian reflectance model to the outliers of the previous step. The calibration procedure is validated with synthetic and real data.

Clinical evaluation of a multifocal aspheric diffractive intraocular lens

Aim: To evaluate the performance of an aspheric diffractive multifocal acrylic intraocular lens (IOL), ZMB00 1-Piece Tecnis. Setting: Five sites across Europe. Methods: Fifty-two patients with cataracts (average age 68.5±10.5 years, 35 female) were bilaterally implanted with the aspheric diffractive multifocal IOL after completing a questionnaire regarding their optical visual symptoms, use of visual correction and their visual satisfaction. The questionnaire was completed again 4-6 months after surgery along with measures of uncorrected and best-corrected distance and near visual acuity, under photopic and mesopic lighting, reading ability, defocus curve testing and ocular examination for adverse events. Results: The residual refractive error was 0.01±0.47D with 56% of eyes within ±0.25D and 97% within ±1.0D. Uncorrected visual acuity was 0.02±0.10logMAR at distance and 0.15±0.30 logMAR at near, only reducing to 0.07±0.10logMAR at distance and 0.21±0.25logMAR at near in mesopic conditions.The defocus curve showed a near addition between 2.5-3.0 D allowing a reading acuity of 0.08±0.13 logMAR, with a range of clear vision <0.3 logMAR of ∼4.0 D. The average reading speed was 121.4±30.8 words per minute. Spectacle independence was 100% for distance and 88% for near, with high levels of satisfaction reported. Overall rating of vision without glasses could be explained (r=0.760) by preoperative best-corrected distance acuity, postoperative reading acuity and postoperative uncorrected distance acuity in photopic conditions (p<0.001). Only two minor adverse events occurred. Conclusions: The ZMB00 1-Piece Tecnis multifocal IOL provides a good visual outcome at distance and near with minimal adverse effects.

Incremental tensor biased discriminant analysis:a new color-based visual tracking method

Most existing color-based tracking algorithms utilize the statistical color information of the object as the tracking clues, without maintaining the spatial structure within a single chromatic image. Recently, the researches on the multilinear algebra provide the possibility to hold the spatial structural relationship in a representation of the image ensembles. In this paper, a third-order color tensor is constructed to represent the object to be tracked. Considering the influence of the environment changing on the tracking, the biased discriminant analysis (BDA) is extended to the tensor biased discriminant analysis (TBDA) for distinguishing the object from the background. At the same time, an incremental scheme for the TBDA is developed for the tensor biased discriminant subspace online learning, which can be used to adapt to the appearance variant of both the object and background. The experimental results show that the proposed method can track objects precisely undergoing large pose, scale and lighting changes, as well as partial occlusion. © 2009 Elsevier B.V.

Colour management of InGaN/GaN based monolithic two-wavelength LEDs

The recent advancement in the growth technology of InGaN/GaN has decently positioned InGaN based white LEDs to leap into the area of general or daily lighting. Monolithic white LEDs with multiple QWs were previously demonstrated by Damilano et al. [1] in 2001. However, there are several challenges yet to be overcome for InGaN based monolithic white LEDs to establish themselves as an alternative to other day-to-day lighting sources [2,3]. Alongside the key characteristics of luminous efficacy and EQE, colour rendering index (CRI) and correlated colour temperature (CCT) are important characteristics for these structures [2,4]. Investigated monolithic white structures were similar to that described in [5] and contained blue and green InGaN multiple QWs without short-period superlattice between them and emitting at 440 nm and 530 nm, respectively. The electroluminescence (EL) measurements were done in the CW and pulse current modes. An integration sphere (Labsphere “CDS 600” spectrometer) and a pulse generator (Agilent 8114A) were used to perform the measurements. The CCT and Green/Blue radiant flux ratio were investigated at extended operation currents from 100mA to 2A using current pulses from 100ns to 100μs with a duty cycle varying from 1% to 95%. The strong dependence of the CCT on the duty cycle value, with the CCT value decreasing by more than three times at high duty cycle values (shown at the 300 mA pulse operation current) was demonstrated (Fig. 1). The pulse width variation seems to have a negligible effect on the CCT (Fig. 1). To account for the joule heating, a duty cycle more than 1% was considered as an overheated mode. For the 1% duty cycle it was demonstrated that the CCT was tuneable in three times by modulating input current and pulse width (Fig. 2). It has also been demonstrated that there is a possibility of keeping luminous flux independent of pulse width variation for a constant value of current pulse (Fig. 3).

Determining which factors influence the optimum multifocal contact lens correction for presbyopia

Presbyopia is a consequence of ageing and is therefore increasing inprevalence due to an increase in the ageing population. Of the many methods available to manage presbyopia, the use of contact lenses is indeed a tried and tested reversible option for those wishing to be spectacle free. Contact lens options to correct presbyopia include multifocal contact lenses and monovision.Several options have been available for many years with available guides to help choose multifocal contact lenses. However there is no comprehensive way to help the practitioner selecting the best option for an individual. An examination of the simplest way of predicting the most suitable multifocal lens for a patient will only enhance and add to the current evidence available. The purpose of the study was to determine the current use of presbyopic correction modalities in an optometric practice population in the UK and to evaluate and compare the optical performance of four silicone hydrogel soft multifocal contact lenses and to compare multifocal performance with contact lens monovision. The presbyopic practice cohort principal forms of refractive correction were distance spectacles (with near and intermediate vision providedby a variety of other forms of correction), varifocal spectacles and unaided distance with reading spectacles, with few patients wearing contact lenses as their primary correction modality. The results of the multifocal contact lens randomised controlled trial showed that there were only minor differences in corneal physiology between the lens options. Visual acuity differences were observed for distance targets, but only for low contrast letters and under mesopic lighting conditions. At closer distances between 20cm and 67cm, the defocus curves demonstrated that there were significant differences in acuity between lens designs (p < 0.001) and there was an interaction between the lens design and the level of defocus (p < 0.001). None of the lenses showed a clear near addition, perhaps due to their more aspheric rather than zoned design. As expected, stereoacuity was reduced with monovision compared with the multifocal contact lens designs, although there were some differences between the multifocal lens designs (p < 0.05). Reading speed did not differ between lens designs (F = 1.082, p = 0.368), whereas there was a significant difference in critical print size (F = 7.543, p < 0.001). Glare was quantified with a novel halometer and halo size was found to significantly differ between lenses(F = 4.101, p = 0.004). The rating of iPhone image clarity was significantly different between presbyopic corrections (p = 0.002) as was the Near Acuity Visual Questionnaire (NAVQ) rating of near performance (F = 3.730, p = 0.007).The pupil size did not alter with contact lens design (F = 1.614, p = 0.175), but was larger in the dominant eye (F = 5.489, p = 0.025). Pupil decentration relative to the optical axis did not alter with contact lens design (F = 0.777, p =0.542), but was also greater in the dominant eye (F = 9.917, p = 0.003). It was interesting to note that there was no difference in spherical aberrations induced between the contact lens designs (p > 0.05), with eye dominance (p > 0.05) oroptical component (ocular, corneal or internal: p > 0.05). In terms of subjective patient lens preference, 10 patients preferred monovision,12 Biofinity multifocal lens, 7 Purevision 2 for Presbyopia, 4 AirOptix multifocal and 2 Oasys multifocal contact lenses. However, there were no differences in demographic factors relating to lifestyle or personality, or physiological characteristics such as pupil size or ocular aberrations as measured at baseline,which would allow a practitioner to identify which lens modality the patient would prefer. In terms of the performance of patients with their preferred lens, it emerged that Biofinity multifocal lens preferring patients had a better high contrast acuity under photopic conditions, maintained their reading speed at smaller print sizes and subjectively rated iPhone clarity as better with this lens compared with the other lens designs trialled. Patients who preferred monovision had a lower acuity across a range of distances and a larger area of glare than those patients preferring other lens designs that was unexplained by the clinical metrics measured. However, it seemed that a complex interaction of aberrations may drive lens preference. New clinical tests or more diverse lens designs which may allow practitioners to prescribe patients the presbyopic contact lens option that will work best for them first time remains a hope for the future.

Serious Games in Economics

The European Leonardo da Vinci Transfer of Innovation project “Teacher training to improve attractiveness and quality of management education through the simulation tool ‘Emerald Forest’” which emphases on using the computer simulation tool for increasing attractiveness of teaching and learning in economics is presented in this paper. The observation of using computer systems and especially serious games in education is provided as well. “Education is not the filling of a pail, but the lighting of a fire” - William Butler Yeats

Large-scale data for multiple-view stereopsis

The seminal multiple-view stereo benchmark evaluations from Middlebury and by Strecha et al. have played a major role in propelling the development of multi-view stereopsis (MVS) methodology. The somewhat small size and variability of these data sets, however, limit their scope and the conclusions that can be derived from them. To facilitate further development within MVS, we here present a new and varied data set consisting of 80 scenes, seen from 49 or 64 accurate camera positions. This is accompanied by accurate structured light scans for reference and evaluation. In addition all images are taken under seven different lighting conditions. As a benchmark and to validate the use of our data set for obtaining reasonable and statistically significant findings about MVS, we have applied the three state-of-the-art MVS algorithms by Campbell et al., Furukawa et al., and Tola et al. to the data set. To do this we have extended the evaluation protocol from the Middlebury evaluation, necessitated by the more complex geometry of some of our scenes. The data set and accompanying evaluation framework are made freely available online. Based on this evaluation, we are able to observe several characteristics of state-of-the-art MVS, e.g. that there is a tradeoff between the quality of the reconstructed 3D points (accuracy) and how much of an object’s surface is captured (completeness). Also, several issues that we hypothesized would challenge MVS, such as specularities and changing lighting conditions did not pose serious problems. Our study finds that the two most pressing issues for MVS are lack of texture and meshing (forming 3D points into closed triangulated surfaces).

Understanding and improving the manufacturing and changeover process in Saudi Arabian business - a multiple case study approach

The importance of the changeover process in the manufacturing industry is becoming widely recognised. Changeover is a complete process of changing between the manufacture of one product to manufacture of an alternative product until specified production and quality rates are reached. The initiatives to improve changeover exist in industry, as better changeover process typically contribute to improved quality performance. A high-quality and reliable changeover process can be achieved through implementation of continuous or radical improvements. This research examines the changeover process of Saudi Arabian manufacturing firms because Saudi Arabia’s government is focused on the expansion of GDP and increasing the number of export manufacturing firms. Furthermore, it is encouraging foreign manufacturing firms to invest within Saudi Arabia. These initiatives, therefore, require that Saudi manufacturing businesses develop the changeover practice in order to compete in the market and achieve the government’s objectives. Therefore, the aim of this research is to discover the current status of changeover process implementation in Saudi Arabian manufacturing businesses. To achieve this aim, the main objective of this research is to develop a conceptual model to understand and examine the effectiveness of the changeover process within Saudi Arabian manufacturing firms, facilitating identification of those activities that affect the reliability and high-quality of the process. In order to provide a comprehensive understanding of this area, this research first explores the concept of quality management and its relationship to firm performance and the performance of manufacturing changeover. An extensive body of literature was reviewed on the subject of lean manufacturing and changeover practice. A research conceptual model was identified based on this review, and focus was on providing high-quality and reliable manufacturing changeover processes during set-up in a dynamic environment. Exploratory research was conducted in sample Saudi manufacturing firms to understand the features of the changeover process within the manufacturing sector, and as a basis for modifying the proposed conceptual model. Qualitative research was employed in the study with semi-structured interviews, direct observations and documentation in order to understand the real situation such as actual daily practice and current status of changeover process in the field. The research instrument, the Changeover Effectiveness Assessment Tool (CEAT) was developed to evaluate changeover practices. A pilot study was conducted by examining the CEAT, proposed for the main research. Consequently, the conceptual model was modified and CEAT was improved in response to the pilot study findings. Case studies have been conducted within eight Saudi manufacturing businesses. These case studies assessed the implementation of manufacturing changeover practice in the lighting and medical products sectors. These two sectors were selected based on their operation strategy which was batch production as well as the fact that they fulfilled the research sampling strategy. The outcomes of the research improved the conceptual model, ultimately to facilitate the firms’ adoption and rapid implementation of a high-quality and reliability changeover during the set-up process. The main finding of this research is that Quality’s factors were considering the lowest levels comparing to the other factors which are People, Process and Infrastructure. This research contributes to enable Saudi businesses to implement the changeover process by adopting the conceptual model. In addition, the guidelines for facilitating implementation were provided in this thesis. Therefore, this research provides insight to enable the Saudi manufacturing industry to be more responsive to rapidly changing customer demands.

The impact of airport shopping environments and dwell time on consumer spending

This article provides new insight into how the ambience and design of shopping environments impact onspending behaviour. Environmental cues in a retail area influence emotional states of by-passers, which in turn influence spending levels. Past research suggested that this effect only applies to shops with moderate arousal level. Also, several studies failed to confirm a relationship between emotions and spending levels. This is surprising, since high arousal environments (e.g., amusement parks, sports stadiums and airports) often feature a wide range of retail outlets. Based on survey data collected in a live airport shopping area, this study finds a relationship between pleasure emotions associated with the retail area and recalled consumer spending, but also the time available for shopping (which in an airport is constrained). Also, visitors’ emotional state was influenced by the ambience (e.g., cleanliness, noise levels, lighting) as well as the design (e.g., easy wayfinding, seating areas) of the retail area. Shopper’s arousal levels did not explain variations in spending level. Implications for researchers and managers are discussed as well as suggestions for future research.

Optimization models for selecting bus stops for accessibility improvements for people with disabilities

Bus stops are key links in the journeys of transit patrons with disabilities. Inaccessible bus stops prevent people with disabilities from using fixed-route bus services, thus limiting their mobility. The Americans with Disabilities Act (ADA) of 1990 prescribes the minimum requirements for bus stop accessibility by riders with disabilities. Due to limited budgets, transit agencies can only select a limited number of bus stop locations for ADA improvements annually. These locations should preferably be selected such that they maximize the overall benefits to patrons with disabilities. In addition, transit agencies may also choose to implement the universal design paradigm, which involves higher design standards than current ADA requirements and can provide amenities that are useful for all riders, like shelters and lighting. Many factors can affect the decision to improve a bus stop, including rider-based aspects like the number of riders with disabilities, total ridership, customer complaints, accidents, deployment costs, as well as locational aspects like the location of employment centers, schools, shopping areas, and so on. These interlacing factors make it difficult to identify optimum improvement locations without the aid of an optimization model. This dissertation proposes two integer programming models to help identify a priority list of bus stops for accessibility improvements. The first is a binary integer programming model designed to identify bus stops that need improvements to meet the minimum ADA requirements. The second involves a multi-objective nonlinear mixed integer programming model that attempts to achieve an optimal compromise among the two accessibility design standards. Geographic Information System (GIS) techniques were used extensively to both prepare the model input and examine the model output. An analytic hierarchy process (AHP) was applied to combine all of the factors affecting the benefits to patrons with disabilities. An extensive sensitivity analysis was performed to assess the reasonableness of the model outputs in response to changes in model constraints. Based on a case study using data from Broward County Transit (BCT) in Florida, the models were found to produce a list of bus stops that upon close examination were determined to be highly logical. Compared to traditional approaches using staff experience, requests from elected officials, customer complaints, etc., these optimization models offer a more objective and efficient platform on which to make bus stop improvement suggestions.

The impact of eliminating extraneous sound and light on students' achievement: An empirical study

The impact of eliminating extraneous sound and light on students’ achievement was investigated under four conditions: Light and Sound controlled, Sound Only controlled, Light Only controlled and neither Light nor Sound controlled. Group, age and gender were the control variables. Four randomly selected groups of high school freshmen students with different backgrounds were the participants in this study. Academic achievement was the dependent variable measured on a pretest, a posttest and a post-posttest, each separated by an interval of 15 days. ANOVA was used to test the various hypotheses related to the impact of eliminating sound and light on student learning. Independent sample T tests on the effect of gender indicated a significant effect while age was non- significant. Follow up analysis indicated that sound and light are not potential sources of extraneous load when tested individually. However, the combined effect of sound and light seems to be a potential source of extrinsic load. The findings revealed that the performance of the Sound and Light controlled group was greater during the posttest and post-posttest. The overall performance of boys was greater than that of girls. Results indicated a significant interaction effect between group and gender on treatment subjects. However gender alone was non-significant. Performance of group by age had no significant interaction and age alone was non-significant in the posttest and post-posttest. Based on the results obtained sound and light combined seemed to be the potential sources of extraneous load in this type of learning environment. This finding supports previous research on the effect of sound and light on learning. The findings of this study show that extraneous sound and light have an impact on learning. These findings can be used to design better learning environments. Such environments can be achieved with different electric lighting and sound systems that provide optimal color rendering, low glare, low flicker, low noise and reverberation. These environments will help people avoid unwanted distraction, drowsiness, and photosensitive behavior.