A laboratory-scale experiment and a numerical simulation of unusual spiral plumes in a High-Prandtl-number fluid, links supplementary material

We experimentally and numerically investigated the generation of plumes from a local heat source (LHS) and studied the interaction of these plumes with cellular convective motion (CCM) in a rectangular cavity filled with silicon oil at a Prandtl number (Pr) of approximately two thousand. The LHS is generated using a 0.2-W green laser beam. A roll-type CCM is generated by vertically heating one side of the cavity. The CCM may lead to the formation of an unusual spiral convective plume that resembles a vertical Archimedes spiral. A similar plume is obtained in a direct numerical simulation. We discuss the physical mechanism for the formation of a spiral plume and the application of the results to mantle convection problems. We also estimate the Reynolds (Re) and Rayleigh (Ra) numbers and apply self-similarity theory to convection in the Earth's mantle. Spiral plumes can be used to interpret mantle tomography results over the last decade.

FDI and Export Participation of Local Firms in Africa: The Case of the Kenyan Garment Industry

FDI in the garment sector has been the single case of large-scale manufacturing investment in African low-income countries since the 1990s. While FDI has triggered the development of local industries in many developing countries, it has not yet been realized in Africa. This paper describes the spillover process in the Kenyan garment industry and investigates the background of local firms' behavior through firm interviews and simulation of expected profits in export market. It shows that credit constraint, rather than absorptive capacity, is a primary source of inactive participation in export opportunity. Only firms which afford additional production facilities without sacrificing stable domestic supply may be motivated to start exporting. However, in comparison with successful Asian exporters, those firms were not as motivated as Asian firms due to the large gap in expected profits.

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Generating Scale-free Networks with Adjustable Clustering Coefficient Via Random Walks

This paper presents an algorithm for generating scale-free networks with adjustable clustering coefficient. The algorithm is based on a random walk procedure combined with a triangle generation scheme which takes into account genetic factors; this way, preferential attachment and clustering control are implemented using only local information. Simulations are presented which support the validity of the scheme, characterizing its tuning capabilities.

Heterogeneity of atmosfpheric ammonia at the landscape scale and consequences for environmental impact assessment.

We examined the consequences of the spatial heterogeneity of atmospheric ammonia (NH3) by measuring and modelling NH3 concentrations and deposition at 25 m grid resolution for a rural landscape containing intensive poultry farming, agricultural grassland, woodland and moorland. The emission pattern gave rise to a high spatial variability of modelled mean annual NH3 concentrations and dry deposition. Largest impacts were predicted for woodland patches located within the agricultural area, while larger moorland areas were at low risk, due to atmospheric dispersion, prevailing wind direction and low NH3 background. These high resolution spatial details are lost in national scale estimates at 1 km resolution due to less detailed emission input maps. The results demonstrate how the spatial arrangement of sources and sinks is critical to defining the NH3 risk to semi-natural ecosystems. These spatial relationships provide the foundation for local spatial planning approaches to reduce environmental impacts of atmospheric NH3.

Caracterización de la agitación local y la respuesta oscilatoria de un buque mediante el uso de técnicas de visión artificial : aplicación al análisis de los umbrales operativos en líneas de atraque y amarre

El desarrollo de actividades de carga y descarga son parte de la esencia de la naturaleza funcional de un puerto, de las cuales derivan en gran medida los ingresos del mismo y la eficiencia de la cadena logística en su conjunto. Las oscilaciones en el interior de una dársena y en un línea de atraque disminuyen la calidad de la estancia de las embarcaciones en puerto, reducen el rendimiento de la estiba de los buques y solicitan y fatigan las estructuras y los cuerpos flotantes amarrados. Si los parámetros que definen la agitación local se aproximan a regiones de fallo 0 parada, el subsistema pierde rendimiento, fiabilidad y finalmente se paralizan las operaciones, produciéndose de este modo tiempos de inactividad. Estas paradas operativas conllevan pérdidas económicas para la terminal y, consecuentemente, para el puerto. Hoy día se dispone vastas redes de monitorización destinadas a la caracterización del medio físico en el entorno de los puertos. Paralelamente, las operaciones de manipulación de cargas en las terminales se están dirigiendo hacia modelos de automatización o semi automatización, que permiten no sólo la sistematización de procesos, sino también un profundo conocimiento del flujo de tareas. En este contexto hay un déficit de información sobre cómo afectan los diferentes forzadores del medio físico al rendimiento, la seguridad funcionalidad del proceso de manipulación de carga y descarga. Esto se debe en gran medida a la falta de registros dilatados en el tiempo que permitan correlacionar todos los aspectos mencionados de un modo particularizado para cada línea de atraque y amarre de un puerto. En esta tesis se desarrolla una metodología de vídeo monitorización no intrusiva y de bajo coste basada en la aplicación de técnicas "pixel tool' y la obtención de los parámetros extrínsecos de una observación monofocal. Con ello pretende poner en valor las infraestructuras de vídeo vigilancia de los puertos y de los laboratorios de experimentación a escala reducida, con el objeto de facilitar el estudio los umbrales operativos de las áreas de atraque y amarre. The development of loading and unloading activities is an essential part of he functional nature of a port, which derive largely from he same income and the efficiency of he supply chain as a whole. The oscillations inside a dock and a mooring line diminish he quality of the stay of vessels in port reducing the performance of the stowage of ship and asking and fatigued structures and moored floating bodies. If the parameters defining the local al agitation regions are close to areas of failure or shutdown, he subsystem looses performance, reliability and eventually paralyzes the operations, thereby producing downtime. These operational stops entail economic 1osses to the terminal and, consequently for the port. Today vast networks of monitoring, aimed at he characterization of the physical environment in the vicinity of he ports, are available. In parallel, the cargo handling operations at terminals are moving towards automation or semi-automation models that allow not only the systematization of processes, but also a deep understanding of he workflow. In this context, there is a lack of information about how the different forcing agents of the physical environment affect the performance and he functional safety of the loading and unloading process. This is due largely to the lack of spread-over-time records which would allow to correlate all aspects mentioned, specifically, for each berthing and mooring of a port. This thesis develops a methodology for non-intrusive and low cost monitoring video based on the application of "pixel tool" techniques and on obtaining the extrinsic parameters of a monofocal observation. It seeks an enhancement of the video monitoring infrastructure at ports and at experimental laboratories of reduced scale, in order to facilitate the study of operational thresholds berthing and mooring areas.

Use of the energy-release rate in a 2 scale damage analysis of a bonded joint

Stress singularities appear at the extremities of an adhesive bond. They can produce a damage mechanism that we assimilate in this Note to a crack. The energy release rate permits to characterize its evolution. But a very refined mesh would be necessary for a real structure. Using an asymptotic method based on the small thickness of the bond a limit model with a different local behaviour is suggested. It leads to an approximation of the energy release rate

Methods for the analysis of multi-scale cell dynamics from fluorescence microscopy images

La embriogénesis es el proceso mediante el cual una célula se convierte en un ser un vivo. A lo largo de diferentes etapas de desarrollo, la población de células va proliferando a la vez que el embrión va tomando forma y se configura. Esto es posible gracias a la acción de varios procesos genéticos, bioquímicos y mecánicos que interaccionan y se regulan entre ellos formando un sistema complejo que se organiza a diferentes escalas espaciales y temporales. Este proceso ocurre de manera robusta y reproducible, pero también con cierta variabilidad que permite la diversidad de individuos de una misma especie. La aparición de la microscopía de fluorescencia, posible gracias a proteínas fluorescentes que pueden ser adheridas a las cadenas de expresión de las células, y los avances en la física óptica de los microscopios han permitido observar este proceso de embriogénesis in-vivo y generar secuencias de imágenes tridimensionales de alta resolución espacio-temporal. Estas imágenes permiten el estudio de los procesos de desarrollo embrionario con técnicas de análisis de imagen y de datos, reconstruyendo dichos procesos para crear la representación de un embrión digital. Una de las más actuales problemáticas en este campo es entender los procesos mecánicos, de manera aislada y en interacción con otros factores como la expresión genética, para que el embrión se desarrolle. Debido a la complejidad de estos procesos, estos problemas se afrontan mediante diferentes técnicas y escalas específicas donde, a través de experimentos, pueden hacerse y confrontarse hipótesis, obteniendo conclusiones sobre el funcionamiento de los mecanismos estudiados. Esta tesis doctoral se ha enfocado sobre esta problemática intentando mejorar las metodologías del estado del arte y con un objetivo específico: estudiar patrones de deformación que emergen del movimiento organizado de las células durante diferentes estados del desarrollo del embrión, de manera global o en tejidos concretos. Estudios se han centrado en la mecánica en relación con procesos de señalización o interacciones a nivel celular o de tejido. En este trabajo, se propone un esquema para generalizar el estudio del movimiento y las interacciones mecánicas que se desprenden del mismo a diferentes escalas espaciales y temporales. Esto permitiría no sólo estudios locales, si no estudios sistemáticos de las escalas de interacción mecánica dentro de un embrión. Por tanto, el esquema propuesto obvia las causas de generación de movimiento (fuerzas) y se centra en la cuantificación de la cinemática (deformación y esfuerzos) a partir de imágenes de forma no invasiva. Hoy en día las dificultades experimentales y metodológicas y la complejidad de los sistemas biológicos impiden una descripción mecánica completa de manera sistemática. Sin embargo, patrones de deformación muestran el resultado de diferentes factores mecánicos en interacción con otros elementos dando lugar a una organización mecánica, necesaria para el desarrollo, que puede ser cuantificado a partir de la metodología propuesta en esta tesis. La metodología asume un medio continuo descrito de forma Lagrangiana (en función de las trayectorias de puntos materiales que se mueven en el sistema en lugar de puntos espaciales) de la dinámica del movimiento, estimado a partir de las imágenes mediante métodos de seguimiento de células o de técnicas de registro de imagen. Gracias a este esquema es posible describir la deformación instantánea y acumulada respecto a un estado inicial para cualquier dominio del embrión. La aplicación de esta metodología a imágenes 3D + t del pez zebra sirvió para desvelar estructuras mecánicas que tienden a estabilizarse a lo largo del tiempo en dicho embrión, y que se organizan a una escala semejante al del mapa de diferenciación celular y con indicios de correlación con patrones de expresión genética. También se aplicó la metodología al estudio del tejido amnioserosa de la Drosophila (mosca de la fruta) durante el cierre dorsal, obteniendo indicios de un acoplamiento entre escalas subcelulares, celulares y supracelulares, que genera patrones complejos en respuesta a la fuerza generada por los esqueletos de acto-myosina. En definitiva, esta tesis doctoral propone una estrategia novedosa de análisis de la dinámica celular multi-escala que permite cuantificar patrones de manera inmediata y que además ofrece una representación que reconstruye la evolución de los procesos como los ven las células, en lugar de como son observados desde el microscopio. Esta metodología por tanto permite nuevas formas de análisis y comparación de embriones y tejidos durante la embriogénesis a partir de imágenes in-vivo. ABSTRACT The embryogenesis is the process from which a single cell turns into a living organism. Through several stages of development, the cell population proliferates at the same time the embryo shapes and the organs develop gaining their functionality. This is possible through genetic, biochemical and mechanical factors that are involved in a complex interaction of processes organized in different levels and in different spatio-temporal scales. The embryogenesis, through this complexity, develops in a robust and reproducible way, but allowing variability that makes possible the diversity of living specimens. The advances in physics of microscopes and the appearance of fluorescent proteins that can be attached to expression chains, reporting about structural and functional elements of the cell, have enabled for the in-vivo observation of embryogenesis. The imaging process results in sequences of high spatio-temporal resolution 3D+time data of the embryogenesis as a digital representation of the embryos that can be further analyzed, provided new image processing and data analysis techniques are developed. One of the most relevant and challenging lines of research in the field is the quantification of the mechanical factors and processes involved in the shaping process of the embryo and their interactions with other embryogenesis factors such as genetics. Due to the complexity of the processes, studies have focused on specific problems and scales controlled in the experiments, posing and testing hypothesis to gain new biological insight. However, methodologies are often difficult to be exported to study other biological phenomena or specimens. This PhD Thesis is framed within this paradigm of research and tries to propose a systematic methodology to quantify the emergent deformation patterns from the motion estimated in in-vivo images of embryogenesis. Thanks to this strategy it would be possible to quantify not only local mechanisms, but to discover and characterize the scales of mechanical organization within the embryo. The framework focuses on the quantification of the motion kinematics (deformation and strains), neglecting the causes of the motion (forces), from images in a non-invasive way. Experimental and methodological challenges hamper the quantification of exerted forces and the mechanical properties of tissues. However, a descriptive framework of deformation patterns provides valuable insight about the organization and scales of the mechanical interactions, along the embryo development. Such a characterization would help to improve mechanical models and progressively understand the complexity of embryogenesis. This framework relies on a Lagrangian representation of the cell dynamics system based on the trajectories of points moving along the deformation. This approach of analysis enables the reconstruction of the mechanical patterning as experienced by the cells and tissues. Thus, we can build temporal profiles of deformation along stages of development, comprising both the instantaneous events and the cumulative deformation history. The application of this framework to 3D + time data of zebrafish embryogenesis allowed us to discover mechanical profiles that stabilized through time forming structures that organize in a scale comparable to the map of cell differentiation (fate map), and also suggesting correlation with genetic patterns. The framework was also applied to the analysis of the amnioserosa tissue in the drosophila’s dorsal closure, revealing that the oscillatory contraction triggered by the acto-myosin network organized complexly coupling different scales: local force generation foci, cellular morphology control mechanisms and tissue geometrical constraints. In summary, this PhD Thesis proposes a theoretical framework for the analysis of multi-scale cell dynamics that enables to quantify automatically mechanical patterns and also offers a new representation of the embryo dynamics as experienced by cells instead of how the microscope captures instantaneously the processes. Therefore, this framework enables for new strategies of quantitative analysis and comparison between embryos and tissues during embryogenesis from in-vivo images.

Estudio de los factores que condicionan, a escala local, la presencia de Epidendrum rhopalostele (Orchidaceae): Implicaciones para su conservación

El análisis de los factores que determinan el establecimiento y supervivencia de orquídeas epífitas, incluyen: a) las condiciones microambientales de los bosques que las mantienen, b) preferencias por las características de los hospederos donde crecen, c) limitación en la dispersión de semillas, d) interacciones planta-planta, y e) asociaciones micorrízicas para la germinación y resultan esenciales para el desarrollo de estrategias para la conservación y manejo de este grupo de plantas. Este trabajo ha evaluado la importancia de estos factores en Epidendrum rhopalostele, orquídea epífita del bosque de niebla montano, a través de los análisis de los patrones espaciales de los árboles que la portan y de la propia orquídea, a escala de población, estudios de asociación y métodos moleculares. Estos últimos han consistido en el uso de marcadores AFLP para el análisis de la estructura genética de la orquídea y en la secuenciación-clonación de la región ITS para la identificación de los hongos micorrízicos asociados. El objetivo de esta tesis es, por tanto, una mejor comprensión de los factores que condicionan la presencia de orquídeas epífitas en los remanentes de bosque de niebla montano y una evaluación de las implicaciones para la conservación y mantenimiento de sus hábitats y la permanencia de sus poblaciones. El estudio fue realizado en un fragmento de bosque de niebla montano de sucesión secundaria situado al este de la Cordillera Real, en los Andes del sur de Ecuador, a 2250 m.s.n.m y caracterizado por una pendiente marcada, temperatura media anual de 20.8°C y precipitación anual de 2193 mm. En este fragmento se mapearon, identificaron y caracterizaron todos los árboles presentes con DBH > 1 cm y todos los individuos de Epidendrum rhopalostele. Así mismo se tomaron muestras de hoja para obtener ADN de todas las orquídeas registradas y muestras de raíces de individuos con flor de E. rhopalostele, uno por cada forófito, para el análisis filogenético de micorrizas. Análisis espaciales de patrones de puntos basados en la K de Ripley y la distancia al vecino más cercano fueron usados para los árboles, forófitos y la población de E. rhopalostele. Se observó que la distribución espacial de árboles y forófitos de E. rhopalostele no es aleatoria, ya que se ajusta a un proceso agregado de Poisson. De ahí se infiere una limitación en la dispersión de las semillas en el fragmento estudiado y en el establecimiento de la orquídea. El patrón de distribución de la población de E. rhopalostele en el fragmento muestra un agrupamiento a pequeña escala sugiriendo una preferencia por micro-sitios para el establecimiento de la orquídea con un kernel de dispersión de las semillas estimado de 0.4 m. Las características preferentes del micro-sitio como tipos de árboles (Clusia alata y árboles muertos), tolerancia a la sombra, corteza rugosa, distribución en los dos primeros metros sugieren una tendencia a distribuirse en el sotobosque. La existencia de una segregación espacial entre adultos y juveniles sugiere una competencia por recursos limitados condicionada por la preferencia de micro-sitio. La estructura genética de la población de E. rhopalostele analizada a través de Structure y PCoA evidencia la presencia de dos grupos genéticos coexistiendo en el fragmento y en los mismos forófitos, posiblemente por eventos de hibridización entre especies de Epidendrum simpátricas. Los resultados del análisis de autocorrelación espacial efectuados en GenAlex confirman una estructura genético-espacial a pequeña escala que es compatible con un mecanismo de dispersión de semillas a corta distancia ocasionada por gravedad o pequeñas escorrentías, frente a la dispersión a larga distancia promovida por el viento generalmente atribuida a las orquídeas. Para la identificación de los micobiontes se amplificó la región ITS1-5.8S-ITS2, y 47 secuencias fueron usadas para el análisis filogenético basado en neighborjoining, análisis bayesiano y máximum-likelihood que determinó que Epidendrum rhopalostele establece asociaciones micorrízicas con al menos dos especies diferentes de Tulasnella. Se registraron plantas que estaban asociadas con los dos clados de hongos encontrados, sugiriendo ausencia de limitación en la distribución del hongo. Con relación a las implicaciones para la conservación in situ resultado de este trabajo se recomienda la preservación de todo el fragmento de bosque así como de las interacciones existentes (polinizadores, micorrizas) a fin de conservar la diversidad genética de esta orquídea epífita. Si fuere necesaria una reintroducción se deben contemplar distancias entre los individuos en cada forófito dentro de un rango de 0.4 m. Para promover el reclutamiento y regeneración de E. rhopalostele, se recomienda que los forófitos correspondan preferentemente a árboles muertos o caídos y a especies, como Clusia alata, que posean además corteza rugosa, sean tolerantes a la sombra, y en el área del sotobosque con menor luminosidad. Además es conveniente que las orquídeas en su distribución vertical estén ubicadas en los primeros metros. En conclusión, la limitación en la dispersión, las características del micro-sitio, las interacciones intraespecíficas y con especies congenéricas simpátricas y las preferencias micorrízicas condicionan la presencia de esta orquídea epífita en este tipo de bosque. ABSTRACT The analysis of factors that determine the establishment and survival of epiphytic depends on factors such as a) microenvironmental conditions of forest, b) preference for host characteristics where orchids grow, c) seed dispersal limitation, d) plant-plant interaction, e) priority mycorrhizal associations for germination, are essential for the development of strategies for management and conservation. This work evaluated the importance of these factors in Epidendrum rhopalostele, an epiphytic orchid of montane cloud forest through the analysis of spatial patterns of host trees and the orchid, in a more specific scale, with association studies and molecular methods, including AFLPs for orchid population genetic structure and the sequencing of the ITS region for associated mycorrhizal fungi. The aim of this thesis is to understand the factors that condition the presence of epiphytic orchids in the remnants of montane cloud forest and to assess the implications for the conservation and preservation of their habitats and the persistence of the orchid populations. The study was carried out in a fragment of montane cloud forest of secondary succession on the eastern slope of Cordillera Real in the Andes of southern Ecuador, located at 2250 m a.s.l. characterized by a steep slope, mean annual temperature of 20.8°C and annual precipitation of 2193 mm. All trees with DBH > 1 cm were mapped, characterized and identified. All E. rhopalostele individuals present were counted, marked, characterized and mapped. Leaf samples of all orchid individuals were collected for DNA analysis. Root samples of flowering E. rhopalostele individuals were collected for phylogenetic analysis of mycorrhizae, one per phorophyte. Spatial point pattern analysis based on Ripley`s K function and nearest neighbor function was used for trees, phorophytes and orchid population. We observed that spatial distribution of trees and phorophytes is not random, as it adjusts to a Poisson cluster process. This suggests a limitation for seed dispersal in the study fragment that is affecting orchid establishment. Furthermore, the small-scale spatial pattern of E. rhopalostele evidences a clustering that suggests a microsite preference for orchid establishment with a dispersal kernel of 0.4 m. Microsite features such as types of trees (dead trees or Clusia alata), shade tolerance trees, rough bark, distribution in the first meters suggest a tendency to prefer the understory for their establishment. Regarding plant-plant interaction a spatial segregation between adults and juveniles was present suggesting competition for limited resources conditioned for a microsite preference. Analysis of genetic structure of E. rhopalostele population through Structure and PCoA shows two genetic groups coexisting in this fragment and in the same phorophyte, possibly as a result of hybridization between sympatric species of Epidendrum. Our results of spatial autocorrelation analysis develop in GenAlex confirm a small-scale spatial-genetic structure within the genetic groups that is compatible with a short-distance dispersal mechanism caused by gravity or water run-off, instead of the long-distance seed dispersal promoted by wind generally attributed to orchids. For mycobionts identification ITS1-5.8S-ITS2 rDNA region was amplified. Phylogenetic analysis was performed with neighborjoining, Bayesian likelihood and maximum-likelihood for 47 sequences yielded two Tulasnella clades. This orchid establishes mycorrhizal associations with at least two different Tulasnella species. In some cases both fungi clades were present in same root, suggesting no limitation in fungal distribution. Concerning the implications for in situ conservation resulting from this work, the preservation of all forest fragment and their interactions (pollinators, mycorrhiza) is recommended to conserve the genetic diversity of this species. If a reintroduction were necessary, distances between individuals in each phorophyte within a range of 0.4 m, are recommended. To promote recruitment and regeneration of E. rhopalostele it is recommended that phorophytes correspond to dead or fallen trees or species, such as Clusia alata. Trees that have rough bark and are shade tolerant are also recommended. Furthermore, regarding vertical distribution, it is also convenient that orchids are located in the first meter (in understory, area with less light). In conclusion, limitation on seed dispersal, microsite characteristics, plant-plant interactions or interaction with cogeneric sympatric species and mycorrhizal preferences conditioned the presence of this epiphytic orchid in this fragment forest.

Residual delay maps unveil global patterns of atmospheric nonlinearity and produce improved local forecasts

We use residual-delay maps of observational field data for barometric pressure to demonstrate the structure of latitudinal gradients in nonlinearity in the atmosphere. Nonlinearity is weak and largely lacking in tropical and subtropical sites and increases rapidly into the temperate regions where the time series also appear to be much noisier. The degree of nonlinearity closely follows the meridional variation of midlatitude storm track frequency. We extract the specific functional form of this nonlinearity, a V shape in the lagged residuals that appears to be a basic feature of midlatitude synoptic weather systems associated with frontal passages. We present evidence that this form arises from the relative time scales of high-pressure versus low-pressure events. Finally, we show that this nonlinear feature is weaker in a well regarded numerical forecast model (European Centre for Medium-Range Forecasts) because small-scale temporal and spatial variation is smoothed out in the grided inputs. This is significant, in that it allows us to demonstrate how application of statistical corrections based on the residual-delay map may provide marked increases in local forecast accuracy, especially for severe weather systems.

Observation via one-dimensional 13Calpha NMR of local conformational substates in thermal unfolding equilibria of a synthetic analog of the GCN4 leucine zipper.

Synthesis of a 33-residue, capped leucine zipper analogous to that in GCN4 is reported. Histidine and arginine residues are mutated to lysine to reduce the unfolding temperature. CD and ultracentrifugation studies indicate that the molecule is a two-stranded coiled coil under benign conditions. Versions of the same peptide are made with 99% 13Calpha at selected sites. One-dimensional 13C NMR spectra are assigned by inspection and used to study thermal unfolding equilibria over the entire transition from 8 to 73 degrees C. Spectra at the temperature extremes establish the approximate chemical shifts for folded and unfolded forms at each labeled site. Resonances for each amino acid appear at both locations at intermediate T, indicating that folded and unfolded forms interconvert slowly (> >2 ms) on the NMR time scale. Moreover, near room temperature, the structured form's resonance is double at several, but not all, sites, indicating at least two slowly interconverting, structured, local conformational substates. Analysis of the dynamics is possible. For example, near room temperature at the Val-9, Ala-24, and Gly-31 positions, the equilibrium constant for interconversion of the two structured forms is near unity and the time scale is > or= 10-20 ms.

E-Book Usage on a Global Scale: Patterns, Trends, and Opportunities

This study examines worldwide usage of over 600,000 e-books from Ebook Library (EBL) and ebrary. Using multiple modes of analysis, the study shows that there are variations in usage by geographic region as well as by subject. The study examines usage in relation to availability of titles, different types of usage per session, usage of the top ten percent of titles, and intensive and extensive use. These patterns can be used for benchmarking and as a model for local e-book studies.

Local probe of fractional edge states of S=1 Heisenberg spin chains

Spin chains are among the simplest physical systems in which electron-electron interactions induce novel states of matter. Here we propose to combine atomic scale engineering and spectroscopic capabilities of state of the art scanning tunnel microscopy to probe the fractionalized edge states of individual atomic scale S=1 spin chains. These edge states arise from the topological order of the ground state in the Haldane phase. We also show that the Haldane gap and the spin-spin correlation length can be measured with the same technique.

On the Result of Invariance of the Closure Set of the Real Projections of the Zeros of an Important Class of Exponential Polynomials

In this paper we provide the proof of a practical point-wise characterization of the set RP defined by the closure set of the real projections of the zeros of an exponential polynomial P(z) = Σn j=1 cjewjz with real frequencies wj linearly independent over the rationals. As a consequence, we give a complete description of the set RP and prove its invariance with respect to the moduli of the c′ js, which allows us to determine exactly the gaps of RP and the extremes of the critical interval of P(z) by solving inequations with positive real numbers. Finally, we analyse the converse of this result of invariance.

Fine-scale estimations of bioclimatic change in the Valencia region, Spain

Recent advances in statistical downscaling have allowed the reconstruction of temperatures for the complete 1948–2011 period in a spatial resolution of 90 m and without gaps for the Valencian Community (Spain) and bordering areas. It presently enables analyses in this region, which allows the determination of recent temperature changes at subregional and local scales. The present work focuses on obtaining the thermicity index according to Rivas-Martínez, a well-known indicator of different thermotypes associated with bioclimatic horizons. The change in this index, which has happened in the region between 1948 and 2011, was calculated by generating fine-scale maps of the potential extension of different thermotypes. The results show a greater regression for the thermotypes in a finicolous position, e.g. Orotemperate, Supratemperate and Supramediterranean horizons, which herein indicate greater potential vulnerability in climate change. In the absence of, and given the need for, such fine-scale information, this work should be useful for specialized researchers to spatially limit the potentially most vulnerable biotopes to climate change.