870 resultados para K32 - Environmental, Health, and Safety Law
Resumo:
NORM (Naturally Occurring Radioactive Material) Waste Policies for the nation's oil and gas producing states have been in existence since the 1980's, when Louisiana was the first state to develop a NORM regulatory program in 1989. Since that time, expectations for NORM Waste Policies have evolved, as Health, Safety, Environment, and Social responsibility (HSE & SR) grows increasingly important to the public. Therefore, the oil and gas industry's safety and environmental performance record will face challenges in the future, about its best practices for managing the co-production of NORM wastes. ^ Within the United States, NORM is not federally regulated. The U.S. EPA claims it regulates NORM under CERCLA (superfund) and the Clean Water Act. Though, there are no universally applicable regulations for radium-based NORM waste. Therefore, individual states have taken responsibility for developing NORM regulatory programs, because of the potential radiological risk it can pose to man (bone and lung cancer) and his environment. This has led to inconsistencies in NORM Waste Policies as well as a NORM management gap in both state and federal regulatory structures. ^ Fourteen different NORM regulations and guidelines were compared between Louisiana and Texas, the nation's top two petroleum producing states. Louisiana is the country's top crude oil producer when production from its Federal offshore waters are included, and fourth in crude oil production, behind Texas, Alaska, and California when Federal offshore areas are excluded. Louisiana produces more petroleum products than any state but Texas. For these reasons, a comparative analysis between Louisiana and Texas was undertaken to identify differences in their NORM regulations and guidelines for managing, handling and disposing NORM wastes. Moreover, this analysis was undertaken because Texas is the most explored and drilled worldwide and yet appears to lag behind its neighboring state in terms of its NORM Waste Policy and developing an industry standard for handling, managing and disposing NORM. As a result of this analysis, fourteen recommendations were identified.^
Resumo:
Personnel involved in natural or man-made disaster response and recovery efforts may be exposed to a wide variety of physical and mental stressors that can exhibit long-lasting and detrimental psychopathological outcomes. In a disaster situation, huge numbers of "secondary" responders can be involved in contaminant clean-up and debris removal and can be at risk of developing stress-related mental health outcomes. The Occupational Safety and Health Administration (OSHA) worker training hierarchy typically required for response workers, known as "Hazardous Waste Operations and Emergency Response" (HAZWOPER), does not address the mental health and safety concerns of workers. This study focused on the prevalence of traumatic stress experienced by secondary responders that had received or expressed interest in receiving HAZWOPER training through the National Institute of Environmental Health Sciences Worker Education and Training Program (NIEHS WETP). ^ The study involved the modification of two preexisting and validated survey tools to assess secondary responder awareness of physical, mental, and traumatic stressors on mental health and sought to determine if a need existed to include traumatic stress-related mental health education in the current HAZWOPER training regimen. The study evaluated post-traumatic stress disorder (PTSD), resiliency, mental distress, and negative effects within a secondary responder population of 176 respondents. Elevated PTSD levels were seen in the study population as compared to a general responder population (32.9% positive vs. 8%-22.5% positive). Results indicated that HAZWOPER-trained disaster responders were likely to test positive for PTSD, whereas, untrained responders with no disaster experience and responders who possessed either training or disaster experience only were likely to test PTSD negative. A majority (68.75%) of the population tested below the mean resiliency to cope score (80.4) of the average worker population. Results indicated that those who were trained only or who possessed both training and disaster work experience were more likely to have lower resiliency scores than those with no training or experience. There were direct correlations between being PTSD positive and having worked at a disaster site and experiencing mental distress and negative effects. However, HAZWOPER training status does not significantly correlate with mental distress or negative effect. ^ The survey indicated clear support (91% of respondents) for mental health education. The development of a pre- and post-deployment training module is recommended. Such training could provide responders with the necessary knowledge and skills to recognize the symptomology of PTSD, mental stressors, and physical and traumatic stressors, thus empowering them to employ protective strategies or seek professional help if needed. It is further recommended that pre-deployment mental health education be included in the current HAZWOPER 24- and 40-hour course curriculums, as well as, consideration be given towards integrating a stand-alone post-deployment mental health education training course into the current HAZWOPER hierarchy.^
Resumo:
On-orbit exposures can come from numerous factors related to the space environment as evidenced by almost 50 years of environmental samples collected for water analysis, air analysis, radiation analysis, and physiologic parameters. For astronauts and spaceflight participants the occupational exposures can be very different from those experienced by workers performing similar tasks in workplaces on Earth, because the duration of the exposure could be continuous for very long orbital, and eventually interplanetary, missions. The establishment of long-term exposure standards is vital to controlling the quality of the spacecraft environment over long periods. NASA often needs to update and revise its prior exposure standards (Spacecrafts Maximum Allowable Concentrations (SMACs)). Traditional standards-setting processes are often lengthy, so a more rapid method to review and establish standards would be a substantial advancement in this area. This project investigates use of the Delphi method for this purpose. ^ In order to achieve the objectives of this study a modified Delphi methodology was tested in three trials executed by doctoral students and a panel of experts in disciplines related to occupational safety and health. During each test/trial modifications were made to the methodology. Prior to submission of the Delphi Questionnaire to the panel of experts a pilot study/trial was conducted using five doctoral students with the goals of testing and adjusting the Delphi questionnaire to improve comprehension, work out any procedural issues and evaluate the effectiveness of the questionnaire in drawing the desired responses. The remainder of the study consisted of two trials of the Modified Delphi process using 6 chemicals that currently have the potential of causing occupational exposures to NASA astronauts or spaceflight participants. To assist in setting Occupational Exposure Limits (OEL), the expert panel was established consisting of experts from academia, government and industry. Evidence was collected and used to create close-ended questionnaires which were submitted to the Delphi panel of experts for the establishment of OEL values for three chemicals from the list of six originally selected (trial 1). Once the first Delphi trial was completed, adjustments were made to the Delphi questionnaires and the process above was repeated with the remaining 3 chemicals (trial 2). ^ Results indicate that experience in occupational safety and health and with OEL methodologies can have a positive effect in minimizing the time experts take in completing this process. Based on the results of the questionnaires and comparison of the results with the SMAC already established by NASA, we conclude that use of the Delphi methodology is appropriate for use in the decision-making process for the selection of OELs.^
Resumo:
Accurate quantitative estimation of exposure using retrospective data has been one of the most challenging tasks in the exposure assessment field. To improve these estimates, some models have been developed using published exposure databases with their corresponding exposure determinants. These models are designed to be applied to reported exposure determinants obtained from study subjects or exposure levels assigned by an industrial hygienist, so quantitative exposure estimates can be obtained. ^ In an effort to improve the prediction accuracy and generalizability of these models, and taking into account that the limitations encountered in previous studies might be due to limitations in the applicability of traditional statistical methods and concepts, the use of computer science- derived data analysis methods, predominantly machine learning approaches, were proposed and explored in this study. ^ The goal of this study was to develop a set of models using decision trees/ensemble and neural networks methods to predict occupational outcomes based on literature-derived databases, and compare, using cross-validation and data splitting techniques, the resulting prediction capacity to that of traditional regression models. Two cases were addressed: the categorical case, where the exposure level was measured as an exposure rating following the American Industrial Hygiene Association guidelines and the continuous case, where the result of the exposure is expressed as a concentration value. Previously developed literature-based exposure databases for 1,1,1 trichloroethane, methylene dichloride and, trichloroethylene were used. ^ When compared to regression estimations, results showed better accuracy of decision trees/ensemble techniques for the categorical case while neural networks were better for estimation of continuous exposure values. Overrepresentation of classes and overfitting were the main causes for poor neural network performance and accuracy. Estimations based on literature-based databases using machine learning techniques might provide an advantage when they are applied to other methodologies that combine `expert inputs' with current exposure measurements, like the Bayesian Decision Analysis tool. The use of machine learning techniques to more accurately estimate exposures from literature-based exposure databases might represent the starting point for the independence from the expert judgment.^
Resumo:
An exposure system was constructed to evaluate the performance of a personal organic vapor dosimeter (3520 OVM) at ppb concentrations of nine selected target volatile organic compounds (VOCs). These concentration levels are generally encountered in community air environments, both indoor and outdoor. It was demonstrated that the chamber system could provide closely-controlled conditions of VOC concentrations, temperature and relative humidity (RH) required for the experiments. The target experimental conditions included combinations of three VOC concentrations (10, 20 and 200 $\rm\mu g/m\sp3),$ three temperatures (10, 25 and 40$\sp\circ$C) and three RHs (12, 50 and 90% RH), leading to a total of 27 exposure conditions. No backgrounds of target VOCs were found in the exposure chamber system. In the exposure chamber, the variation of the temperature was controlled within $\pm$1$\sp\circ$C, and the variation of RH was controlled within $\pm$1.5% at 12% RH, $\pm$2% at 50% RH and $\pm$3% at 90% RH. High-emission permeation tubes were utilized to generate the target VOCs. Various patterns of the permeation rates were observed over time. The lifetimes and permeation rates of the tubes differed by compound, length of the tube and manufacturer. By carefully selecting the source and length of the tubes, and closely monitoring tube weight loss over time, the permeation tubes can be used for delivering low and stable concentrations of VOCs during multiple days.^ The results of this study indicate that the performance of the 3520 OVM is compound-specific and depends on concentration, temperature and humidity. With the exception of 1,3-butadiene under most conditions, and styrene and methylene chloride at very high relative humidities, recoveries were generally within $\pm$25% of theory, indicating that the 3520 OVM can be effectively used over the range of concentrations and environmental conditions tested with a 24-hour sampling period. Increasing humidities resulted in increasing negative bias from full recovery. Reverse diffusion conducted at 200 $\rm\mu g/m\sp3$ and five temperature/humidity combinations indicated severe diffusion losses only for 1,3-butadiene, methylene chloride and styrene under increased humidity. Overall, the results of this study do not support the need to employ diffusion samplers with backup sections for the exposure conditions tested. ^
Resumo:
Real time Tritium concentrations in air in two chemical forms, HT and HTO, coming from an ITER-like fusion reactor as source were coupled the European Centre Medium Range Weather Forecast (ECMWF) numerical model with the Lagrangian Atmospheric-particle dispersion model FLEXPART. This tool was analyzed in nominal tritium discharge operational reference and selected incidental conditions affecting the Western Mediterranean Basin during 45 days during summer 2010 together with surface “wind observations” or weather data based in real hourly observations of wind direction and velocity providing a real approximation of the tritium behavior after the release to the atmosphere from a fusion reactor. From comparison with NORMTRI - a code using climatologically sequences as input - over the same area, the real time results have demonstrated an apparent overestimation of the corresponding climatologically sequence of Tritium concentrations in air outputs, at several distances from the reactor. For this purpose two development patterns were established. The first one was following a cyclonic circulation over the Mediterranean Sea and the second one was based on the plume delivered over the Interior of the Iberian Peninsula and Continental Europe by another stabilized circulation corresponding to a High Pressure System. One of the important remaining activities defined then, was the qualification tool. In order to validate the model of ECMWF/FLEXPART we have developed of a new complete data base of tritium concentrations for the months from November 2010 to March 2011 and defined a new set of four patterns of HT transport in air, in each case using real boundary conditions: stationary to the North, stationary to the South, fast and very fast displacement. Finally the differences corresponding to those four early patterns (each one in assessments 1 and 2) has been analyzed in terms of the tuning of safety related issues and taking into account the primary phase o- - f tritium modeling, from its discharge to the atmosphere to the deposition on the ground, will affect to the complete tritium environmental pathway altering the chronic dose by absorption, reemission and ingestion both from elemental tritium, HT and from the oxide of tritium, HTO
Resumo:
All activities of an organization involve risks that should be managed. The risk management process aids decision making by taking account of uncertainty and the possibility of future events or circumstances (intended or unintended) and their effects on agreed objectives. With that idea, new ISO Standard has been drawn up. ISO 31010 has been recently issued which provides a structured process that identifies how objectives may be affected, and analyses the risk in term of consequences and their probabilities before deciding on whether further treatment is required. In this lecture, that ISO Standard has been adapted to Open Pit Blasting Operations, focusing in Environmental effects which can be managed properly. Technique used is Fault Tree Analysis (FTA), which is applied in all possible scenarios, providing to Blasting Professionals the tools to identify, analyze and manage environmental effects in blasting operations. Also this lecture can help to minimize each effect, studying each case. This paper also can be useful to Project Managers and Occupational Health and Safety Departments (OH&S) because blasting operations can be evaluated and compared one to each other to determine the risks that should be managed in different case studies. The environmental effects studied are: ground vibrations, flyrock and air overpressure (airblast). Sometimes, blasting operations are carried out near populated areas where environmental effects may impose several limitations on the use of explosives. In those cases, where these factors approach certain limits, National Standards and Regulations have to be applied.
Resumo:
This article examines past and present systems requiring that a person receive permission before buying or borrowing a firearm. The article covers laws from the eighteenth century to the present. Such laws have traditionally been rare in the United States. The major exceptions are antebellum laws of the slaves states, and of those same states immediately after the Civil War, which forbade gun ownership by people of color, unless the individual had been granted government permission. Today “universal background checks” are based on a system created by former New York City Mayor Michael Bloomberg and his “Everytown” lobby. Such laws have been enacted in several states, and also proposed as federal legislation. Besides covering the private sale of firearms, they also cover most loans of firearms and the return of loaned firearms. By requiring that almost all loans and returns may only be processed by a gun store, these laws dangerously constrict responsible firearms activities, such as safety training and safe storage. Massachusetts, Connecticut, and California are among the jurisdictions which have enacted less restrictive, more effective legislation which create controls on private firearms sales, without inflicting so much harm on firearms safety.
Resumo:
Traditional measures or indicators of workplace safety performance reflect unrecognized hazards, unsafe conditions, reckless behavior, and other safety program shortcomings only after a worker is injured or falls ill. In contrast to traditional or lagging indicators, leading indicators can predict poor safety performance to ensure that safety program failings are addressed before an occupational injury or illness actually occurs. This Capstone Project identified a variety of proactive safety management practices, policies, and activities shown to have a positive impact on workplace safety as leading safety indicators. The end result is a comprehensive framework of leading safety indicators that employers can use to proactively gauge safety program performance and address unrecognized hazards, unsafe conditions, reckless behavior, and other safety program deficiencies.
Resumo:
This study was part of a larger scoping review and environmental scan conducted for Veterans Affairs Canada on the effects of operational stress injuries (OSIs) on the mental health and wellbeing of Veterans’ families. This paper focuses broadly on the relationships between combat (and/or deployment more generally), OSIs (primarily post-traumatic stress disorder (PTSD)), and the family. Based on the scoping review, the paper finds that existing research investigates the impacts of a Veteran’s OSI on the family, but also how various aspects of the family (such as family functioning, family support, etc.) can impact a Veteran living with an OSI.
Resumo:
Material prepared for a training course held at OCDM Staff College, Battle Creek, Michigan, April 23-28, 1961.
Resumo:
National Highway Traffic Safety Administration, Washington, D.C.
Resumo:
Federal Highway Administration, Environmental Division, Washington, D.C.
Resumo:
"Health and Safety."
Resumo:
"Health and Safety."