Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model-restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability (ĥpa 2) were greater than those of the additive effect based on single individuals (ĥa 2) and within plot additive (ĥad 2). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina GG = 24.63 %, Selvíria GG = 13.63 %, and Votuporanga GG = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was GG = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test. © 2013 Springer Science+Business Media Dordrecht.

Age-related differences in time-limit performance and force platform-based balance measures during one-leg stance

Poor posture control has been associated with an increased risk of falls and mobility disability among older adults. This study was conducted to assess the test-retest reliability and sensitivity to group differences regarding the time-limit (TLimit) of one-leg standing and selected balance parameters obtained with a force platform in older and young adults. A secondary purpose was to assess the relationship between TLimit and these balance parameters. Twenty-eight healthy older adults (age: 69±5years) and thirty young adults (age: 21±4years) participated in this study. Two one-leg stance tasks were performed: (1) three trials of 30s maximum and (2) one TLimit trial. The following balance parameters were computed: center of pressure area, RMS sway amplitude, and mean velocity and mean frequency in both the anterio-posterior and medio-lateral directions. All balance parameters obtained with the force platform as well as the TLimit variable were sensitive to differences in balance performance between older and young adults. The test-retest reliability of these measures was found to be acceptable (ICC: 0.40-0.85), with better ICC scores observed for mean velocity and mean frequency in the older group. Pearson correlations coefficients (r) between balance parameters and TLimit ranged from -0.16 to -0.54. These results add to the current literature that can be used in the development of measurement tools for evaluating balance in older and young adults. © 2013 Elsevier Ltd.

Problems of load dispatching in interconnected systems

Includes bibliography

Estimação do diâmetro e rugosidade em um processo de furação utilizando multi sensores e redes neurais artificiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uma análise dos modelos de consórcio modular e condomínio industrial na indústria automobilística brasileira sob a perspectiva de estratégia de operações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic variation in native and farmed populations of Tambaqui (Colossoma macropomum) in the Brazilian Amazon: regional discrepancies in farming systems

O tambaqui, Colossoma macropomum, é a espécie de peixes mais popularmente usada para a aquicultura no Brasil, mas não há nenhum estudo comparando a variação genética entre as populações nativas e de cultivo desta espécie. No presente estudo foram analisadas sequências de DNA mitocondrial para avaliar a diversidade genética entre duas populações selvagens, um plantel de produção de alevinos, e uma amostra de estoques de piscicultura, todos da região de Santarém, no oeste do estado do Pará. Níveis similares de diversidade genética foram encontrados em todas as amostras e, surpreendentemente, o plantel mostrou expressiva representação da diversidade genética registrada em populações selvagens. Estes resultados contrastam consideravelmente com os do estudo anterior de estoques cultivados nos estados do Amapá, Pará, Piauí, Rondônia, que registrou apenas dois haplótipos, indicando uma longa história de endogamia nas matrizes utilizadas para a produção de alevinos. Os resultados dos dois estudos mostram dois cenários distintos de aquicultura do tambaqui na Amazônia, que devem ser melhor avaliados, a fim de garantir o sucesso da expansão da atividade na região, e no resto do Brasil, já que o tambaqui e seus híbridos agora são cultivados em todo o país.

Using a threaded framework to enable practical activities in Operating Systems courses

Teaching Operating Systems (OS) is a rather hard task, since being an OS designer is not a desired goal for most students and the subject demands a large amount of knowledge over system's details. To reduce the difficulty many courses are planned with laboratory practices, differing in how the practices are designed. Some try to implement next-to-real kernels, others use simulators, and even others use synthetic kernels. In this paper an approach based on synthetic kernels is described. It uses thread programming in order to establish control over the operating system components. T his approach allows the kernel to grow following the materials presented in the course. It has been successfully applied in two different courses at our University, the first one being a basic OS course and the second one an upper level course. Results from these applications are presented.

The bias in reversing the Box-Cox transformation in time series forecasting: An empirical study based on neural networks

The Box-Cox transformation is a technique mostly utilized to turn the probabilistic distribution of a time series data into approximately normal. And this helps statistical and neural models to perform more accurate forecastings. However, it introduces a bias when the reversion of the transformation is conducted with the predicted data. The statistical methods to perform a bias-free reversion require, necessarily, the assumption of Gaussianity of the transformed data distribution, which is a rare event in real-world time series. So, the aim of this study was to provide an effective method of removing the bias when the reversion of the Box-Cox transformation is executed. Thus, the developed method is based on a focused time lagged feedforward neural network, which does not require any assumption about the transformed data distribution. Therefore, to evaluate the performance of the proposed method, numerical simulations were conducted and the Mean Absolute Percentage Error, the Theil Inequality Index and the Signal-to-Noise ratio of 20-step-ahead forecasts of 40 time series were compared, and the results obtained indicate that the proposed reversion method is valid and justifies new studies. (C) 2014 Elsevier B.V. All rights reserved.

A mathematical approach to simulate spatio-temporal patterns of an insect-pest, the corn rootworm Diabrotica speciosa (Coleoptera: Chrysomelidae) in intercropping systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

First all-sky search for continuous gravitational waves from unknown sources in binary systems

We present the first results of an all-sky search for continuous gravitational waves from unknown spinning neutron stars in binary systems using LIGO and Virgo data. Using a specially developed analysis program, the TwoSpect algorithm, the search was carried out on data from the sixth LIGO science run and the second and third Virgo science runs. The search covers a range of frequencies from 20 Hz to 520 Hz, a range of orbital periods from 2 to similar to 2,254 h and a frequency-and period-dependent range of frequency modulation depths from 0.277 to 100 mHz. This corresponds to a range of projected semimajor axes of the orbit from similar to 0.6 x 10(-3) ls to similar to 6,500 ls assuming the orbit of the binary is circular. While no plausible candidate gravitational wave events survive the pipeline, upper limits are set on the analyzed data. The most sensitive 95% confidence upper limit obtained on gravitational wave strain is 2.3 x 10(-24) at 217 Hz, assuming the source waves are circularly polarized. Although this search has been optimized for circular binary orbits, the upper limits obtained remain valid for orbital eccentricities as large as 0.9. In addition, upper limits are placed on continuous gravitational wave emission from the low-mass x-ray binary Scorpius X-1 between 20 Hz and 57.25 Hz.

Projeto de mapeamento do lead time de uma empresa multinacional do ramo sucroalcooleira: estudo de caso

Facing the competitive current market, increases the growing managerial commitment to minimize the frequent occurrence of service failures that characterized the past. Given the fact that the supply of a product in the correct location and on time, undamaged and correctly billed market requirement becomes framed the present work. Based on a case study, supported in parallel bibliographical references in the literature in a company of sugar and alcohol sector, the survey aims to measure and evaluate the real-time delivery from suppliers in order to ensure the best level of service to the company in question by suppliers, by reducing idle time of delivery, since the control system does not supply the pre-established and / or observed above, thus obtaining a better management and supply of replacement material. To assist the work, developed a project in the company in question in order to analyze and identify applications of concepts of lead time along the supply chain through an exploratory study in order to provide a beneficial outcome to the company through monitoring and performance of its suppliers, which will enable an aid to future decision-making

Uma análise das estratégias de manufatura adotadas por seis montadoras da indústria automobilística mundial

The Brazilian automotive industry has undergone profound changes during the 90’s decade, as a consequence of the market opening up through the liberation of automobile imports. The exposure of the Brazilian domestic market to competition with imported products of high quality and lower prices indicated the need for significant changes in those auto industries operating in this country, with the intention of making them competitive. To achieve these objectives management and production concepts were adopted, such as: the just-in-time philosophy; lean manufacturing; outsourcing; reengineering and increasing the rate of automation in both production and management systems. These changes helped to increase productivity and, in turn, reduced the level of employment in the sector, especially in activities where the required qualification levels were low. Despite this modernization, the Brazilian companies have committed themselves to meet the specific needs of the Brazilian market. The objective of this paper is to analyze and present manufacturing strategies from six manufacturers of automotive vehicles: Toyota in Japan, Fiat in Italy, Volkswagen in Brazil and Germany and General Motors in the U.S. and Brazil. The predominant method of research was from reviewing relevant literature, whereas the empirical data was analyzed qualitatively. The article seeks to identify the manufacturing strategies adopted by manufacturers located in the above countries, electing one automotive manufacturer to represent each country. The research demonstrated that the processes for production of automobiles in four plants located in, the U.S. (GM); Italy (Fiat); Japan (Toyota) and Germany (VW) are similar to those adopted in Brazilian industrial plants of the same companies (GM and VW), with differences of operations only in the business strategies adopted by each of them.

Metacommunity organisation, spatial extent and dispersal in aquatic systems: patterns, processes and prospects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The two faces of leuconostoc mesenteroides in food systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adoption of lean thinking practices at Brazilian auto part companies

The objective of this study is to analyze the adoption of lean thinking practices at Brazilian auto part companies. For such, a survey was conducted at 75 sector companies. The results reveal that among all practices, the “systematic search for continuous improvement" obtained the highest implementation average. In terms of correlation, interdependence was observed among all Lean Manufacturing variables, most especially between LM5 (Kanban) and LM6 (Just-in-Time). This correlation can be explained by the importance of Kanban systems when implementing Just-inTime.