Observation of the antimatter helium-4 nucleus

High-energy nuclear collisions create an energy density similar to that of the Universe microseconds after the Big Bang(1); in both cases, matter and antimatter are formed with comparable abundance. However, the relatively short-lived expansion in nuclear collisions allows antimatter to decouple quickly from matter, and avoid annihilation. Thus, a high-energy accelerator of heavy nuclei provides an efficient means of producing and studying antimatter. The antimatter helium-4 nucleus ((4)(He) over bar), also known as the anti-alpha ((alpha) over bar), consists of two antiprotons and two antineutrons (baryon number B = -4). It has not been observed previously, although the alpha-particle was identified a century ago by Rutherford and is present in cosmic radiation at the ten per cent level(2). Antimatter nuclei with B -1 have been observed only as rare products of interactions at particle accelerators, where the rate of antinucleus production in high-energy collisions decreases by a factor of about 1,000 with each additional antinucleon(3-5). Here we report the observation of (4)<(He) over bar, the heaviest observed antinucleus to date. In total, 18 (4)(He) over bar counts were detected at the STAR experiment at the Relativistic Heavy Ion Collider (RHIC; ref. 6) in 10(9) recorded gold-on-gold (Au+Au) collisions at centre-of-mass energies of 200 GeV and 62 GeV per nucleon-nucleon pair. The yield is consistent with expectations from thermodynamic(7) and coalescent nucleosynthesis(8) models, providing an indication of the production rate of even heavier antimatter nuclei and a benchmark for possible future observations of (4)(He) over bar in cosmic radiation.

Energy and system size dependence of phi meson production in Cu plus Cu and Au plus Au collisions

We study the beam-energy and system-size dependence of phi meson production (using the hadronic decay mode phi -> K(+) K(-)) by comparing the new results from Cu + Cu collisions and previously reported Au + Au collisions at root s(NN) = 62.4 and 200 GeV measured in the STAR experiment at RHIC. Data presented in this Letter are from mid-rapidity (vertical bar y vertical bar < 0.5) for 0.4 < p(T) < 5 GeV/c. At a given beam energy, the transverse momentum distributions for phi mesons are observed to be similar in yield and shape for Cu + Cu and Au + Au colliding systems with similar average numbers of participating nucleons. The phi meson yields in nucleus-nucleus collisions, normalized by the average number of participating nucleons, are found to be enhanced relative to those from p + p collisions. The enhancement for phi mesons lies between strange hadrons having net strangeness = 1 (K(-) and <(A)over bar>) and net strangeness = 2 (Xi). The enhancement for phi mesons is observed to be higher at root s(NN) = 200 GeV compared to 62.4 GeV. These observations for the produced phi(s (s) over bar) mesons clearly suggest that, at these collision energies, the source of enhancement of strange hadrons is related to the formation of a dense partonic medium in high energy nucleus-nucleus collisions and cannot be alone due to canonical suppression of their production in smaller systems. (C) 2009 Elsevier B.V. All rights reserved.

Group 11 (Cu, Ag, Au) promotion of 15%Co/Al(2)O(3) Fischer-Tropsch synthesis catalysts

Co/Al(2)O(3) Fischer-Tropsch synthesis catalysts promoted with different quantities of Group 11 metals (Cu, Ag, Au) were characterized and tested. The presence of relatively small quantities of such metals enhanced Co reducibility and, in the cases of Ag and Au, improved the surface Co metal active site densities. EXAFS experiments with the most loaded catalyst samples show that only Co-Co and Me-Me (Me = Cu, Ag and Au) coordination could be observed. This suggests that the greater fraction of the metals form different phases. However, the reduction promoting effect of the Group 11 metal is severely hampered once the catalyst receives a mild passivation treatment following primary reduction. An explanation in terms of promoter segregation during primary reduction is proposed. At lower promoter levels (0.83%Ag and 1.51%Au) and higher Ag levels (2.76%), significant gains in Co active site densities were achieved resulting in improved CO conversion levels relative to the unpromoted catalyst. Moreover, slight decreases in light product (e.g., CH(4)) selectivity and slight increases in C(5)+ selectivity were achieved. At high Au loading (5.05%), however, too much Au was loaded which, although significantly increasing the fraction of Co reduced, blocked Co surface sites and resulted in decreased Co conversion rates. While Cu facilitated Co reduction, the increased fraction of reduced Co did not translate to improved active site densities. It appears that a fraction of Cu tended to cover the rim of Co clusters, resulting in decreases in CO conversion rates and detrimental increases in light product selectivity. (C) 2009 Elsevier B.V. All rights reserved.

Seeing the Whole Elephant in the Room: A Holistic approach to ebooks

This presentation was offered as part of the CUNY Library Assessment Conference, Reinventing Libraries: Reinventing Assessment, held at the City University of New York in June 2014.

Kriminalitetens geografi : vardagsbrottslighetens spatiala fördelning i Borlänge

The aim of this thesis is to describe and analyze the geographical distribution of everyday criminality in the town of Borlänge during the year 2002 and to analyze which measures to be taken in the physical social planning to decrease this everyday criminality there. The term everyday criminality is here to be understood as those categories of crime that appear most frequently in the records of reports to the police every year. Here two kinds of crime have been in focus, thefts from cars and office burglary.In fulfilling this aim two main questions have been answered. The first one is how the everyday criminality was distributed geographically in the town of Borlänge during the year 2002. The second one is which measures to be taken in the physical social planning to decrease this everyday criminality in the town of Borlänge.In order to answer the first question a spatial autocorrelation analysis, Local Moran LISA has been used. This method is based on the measurement Moran´s I and shows the spatial autocorrelation for every single location. To answer the second question three different theories of crime prevention through environmental design have been studied and applied in the analysis. These are Jane Jacobs’ ideas about ”the living city”, Oscar Newman´s ideas about ”defensible space” and Ronald V. Clarke´s theories about crime prevention.The major conclusions that can be drawn from this thesis are that the risk of being exposed to thefts from cars, during the analyzed time period, was highest in Centrum and Hagalund and their surroundings. The lowest risk of being exposed to this type of crime was found in Domnarvet and Islingby, during the year 2002. The highest risk of being a victim of the crime office burglary was found in Hagalund and its surroundings and in the single area of Kvarnsveden. The corresponding lowest risk was found in Lergärdet and its surroundings and in Norra Backa and Kupolen. The measures that should be taken in order to decrease these types of criminality can be divided into overall changes and place-specific changes. When it comes to the crime thefts from cars a more attractive central business district, a better view of parking lots from nearby buildings, dividing of larger parking lot zones into smaller ones, migration of hidden parking lots and stronger access control to parking lots where problems with this kind of crime have occurred have been suggested as overall changes. The corresponding place-specific changes are to remove vegetation that is blocking the view, better lighting and to put up signs with information about increased risk of exposure to crime at parking lots with the most problems. To decrease the amount of office burglaries overall changes as to create a better view of the area from nearby surroundings, move bigger office compartments or divide them into smaller units, rebuild characteristic buildings and increase security by strengthening the access control to offices with these kinds of problems could be useful. Finally there are possibilities to decrease office burglary by using place-specific measures as surveillance cameras combined with signs containing information about these, high fences and better lighting around the buildings where a higher risk of being exposed to this kind of criminality is present.

Socialantropologiska teorier applicerbara på solenergiteknik : Del 2 Diskussion av mikro- och makroperspektiv

Denna skrift färdigställdes i augusti -96. De metoder som redogörs för i rapporten har använts i ett socialantropologiskt translokalt fältarbete som pågått periodvis under loppet av en fyraårsperiod. Dessa metoder, liksom de teorier som tas upp här, är utvalda för att användas i en kommande doktorsavhandling om försöken att integrera solenergiteknik i det svenska samhället (Solenergiteknik diskuteras emellertid inte explicit i denna rapport. För en närmare redogörelse av det pågående avhandlingsarbetet se Socialantropologisk studie av solenergiteknikers införande i Sverige. Projektpresentation oktober 1995, arbetshandling SERC). Jag förespråkar i rapporten en användning av begreppen nätverk och process som metod- och analysredskap. Jag för också fram en kulturteori som utgör en samlad syn på de teoretiska begreppen kultur, struktur och process. Dikotomin mellan individ och samhälle försvagas här kraftigt, både genom mitt sätt att använda kulturbegreppet och genom min användning av begreppet struktur .Denna kulturteori inbegriper såväl idémässiga, sociala som materiella förhållanden och är samtidigt en teori om förändring. Jag framför här också ett förslag till två lämpliga målsättningar för att föra socialantropologiska mikro- och makroperspektiv närmare varandra. Den ena målsättningen innebär att man vid teoretiska mer generaliserande beskrivningar av förhållanden i världen bör sträva mot att uttrycka sig så att dessa beskrivningar också blir applicerbara på specifika fältarbeten. Detta innebär både att de begrepp som används ska vara bra redskap att tänka med för antropologen i fält, och att de makroteoretiska resonemang som förs i allt högre utsträckning bygger på fältarbeten som på varierande sätt inkluderar globala skeenden. Den andra målsättningen gäller fältarbetet och beskrivningen av detta. Här menar jag att också fältarbeten behöver planeras, utföras och presenteras så att sådana fältarbeten tillsammans kan ingå i det makroantropologiska projektet att skapa underlag för makroteorier om förhållanden i världen. Min avsikt är att i mitt eget avhandlingsarbete använda mig av teoretiska begrepp och metodologiska tillvägagångssätt som överensstämmer med dessa två målsättningar.

Provning av ackumulatorsystem för solvärmeanläggningar

Inom projektet provades 10 konfigurationer av samma ackumulatortank. Tankarna utsattes under kontrollerade förhållanden för en 6-dagars testcykel. Under testet tillfördes varje tank värme från en (simulerad) solfångare och, i den mån det behövdes, tillsatsvärme från elpatronen. Väderförhållanden under de sex dagarna var två fina, en växlande, två dåliga och ytterligare en växlande dag i nämnd följd. De flesta systemkonfigurationer klarade sig under de soliga dagarna utan energitillskott från elpatronen och förmådde dessutom att lagra värnlen så att även tappningar på följande dag med "växlande" väder kunde ske utan el-tillskott. De molniga dagarna behövde alla systemkonfigurationer el-tillskott. Solvärmesystemens täckningsgrad varierade mellan 36,5 % för det sämsta systemet till 70, 3 % för det bästa. En ackumulatortank med två seriekopplade tappvarmvattenvärmeväxIare (en i botten för förvärmning och en i tankens övre del för slutvärmning) ger betydligt bättre resultat än en tank med bara en enda sådan värmeväxlare. Tankens volym var i de utförda provningarna 750 liter, solfångarstorleken 10 m2 och lasten 13 kWh per dag. För dessa förutsättningar ger en yttre solvärmeväxlare inga mätbara fördelar gentemot en tillräcklig stor inbyggd värmeväxlare. De gjorda försöken visar, att alla tankkonfigurationerna visar dålig skiktning. Ett fortsatt arbete bör göras för att minska omblandningen i tanken vid både inladdning och uttag av värme.

Brytmånens utformning vid trädfällning - Jämförande studier av böjmotstånd och gångjärnseffekt : Designing felling hinge in tree felling - Comparative studies of bending resistance and hinge effect

Vid trädfällning med motorsåg sparar man en så kallad brytmån som skall fungera som ett gång¬järn när trädet fälls. Om brytmånen går av tidigt finns en risk att trädet faller okontrolle¬rat. De rekommendationer som finns säger att brytmånens bredd skall göras proportionell mot trädets diameter. Genom att teoretiskt och praktiskt undersöka vilka krafter brytmånen utsätts för och vad den håller för har det varit möjligt att dra vissa slutsatser om hur en bra brytmån skall se ut. Ett viktigt resultat är att en bred brytmån (över 30-40 mm) är mycket trög att böja och inte fungerar i det avseendet att den går av redan vid små böjningar. Teoretiska be¬räkningar och praktiska försök visar att en relativt smal brytmån håller för belastningen vid rakt motlut även på stora träd. Som ny rekommendationen föreslås att brytmånens bredd inte bör vara mer än 30 mm. Av försöken kan man också dra slutsatsen att frusen ved är stel och brister tidigt, varför svår¬fällda träd inte bör fällas när veden är fryst.A felling hinge is used when felling trees by help of chain saw. If the hinge breaks early in the fall of the tree there is a great risk that the tree will fall without control. Present recommenda¬tions in Sweden say that the thickness of the felling hinge shall be made in proportion to the stem diameter. By use of theoretical and practical examinations of the forces stressing the felling hinge, and the strength of the wood itself, it has been possible to draw conclusions regarding the correct design of a felling hinge. One important result is that a thick felling hinge (over 30-40 mm) is very hard to bend and does not work well as it looses most of its strength already at a small forward bending angel. Theoretical calculations and practical tests show that a relatively narrow felling hinge will manage very well the forces when felling trees with lean opposite to the felling direction even for large trees. Our new recommendation is that the thickness of the felling hinge in normal Swedish conditions should not exceed 30 mm. Through the studies it can also be seen that frozen, brittle wood breaks at small bending angels. For that reason particularly difficult trees not should be felled when the wood is frozen.

Differences in the Effects of Social Context on Emotional Responding

This study compares the effects of social cues on emotional experiences of men and women. Literature suggests that emotional responses are influenced by the presence and expressiveness of other individuals (Hess, Banse, & Kappas, 1995; Jacobs, Manstead, & Fischer, 2001; Fridlund, 1991). We examined whether social cues influence the experience of emotions differently for men and women. Research on gender differences in self-construal (Cross & Madson, 1997) led us to expect that women’s own emotional reactions would be more sensitive to emotional cues from other individuals than men’s.

Investigation of Iron (III) desferrioxamine B oxalate ligand exchange by UV-vis spectroscopy: the next step in developing a quantitative analytical method for measuring bioavailable iron in marine ecosystems

To date there are no analytical techniques designed to exclusively measure bioavailable iron in marine environments. The goal of this research is to develop such a technique by isolating the bioavailable iron using the terrestrial siderophore desferrioxamine B (DFB). This project contained many challenging aspects, but the specific goal of this study was to develop a robust analytical technique for quantification of Fe(III)-DFB complexes at nanomolar concentrations. Past work showed that oxalate (Ox) promotes photodissociation of Fe(III)-DFB to Fe(Il), and we are specifically interested in the mechanism of this process. A model was developed using known thermodynamic constants for Fe(III)-DFB and Fe(III) oxalato complexes and adjusting for ionic strength. The model was confirmed by monitoring the UV-VIS absorbance of the system at a variety of oxalate concentrations and pH. The model did not include ternary complexes. Next., the rate of Fe(1I) production during UV irradiation was examined. The results showed that the rate of Fe(II) production was based entirely on the [Fe(Ox)?]3- speciation, and that reoxidation of Fe(II) occurred via reactive oxygen intermediates. This reoxidation could be avoided by either decreasing the oxygen concentration or by adding a Fe(II) stabilizing reagent, such as ferrozine. Further studies need to be done to confirm that these results apply at sub nanomolar concentrations, and the issue of Fe(II) reoxidation at lower Fe concentrations needs to be addressed.