The impact of cyclin D1 mRNA isoforms, morphology and p53 in mantle cell lymphoma: p53 alterations and blastoid morphology are strong predictors of a high proliferation index.

BACKGROUND: Mantle cell lymphoma is a clinically heterogeneous disease characterized by overexpression of cyclin D1 protein. Blastoid morphology, high proliferation, and secondary genetic aberrations are markers of aggressive behavior. Expression profiling of mantle cell lymphoma revealed that predominance of the 3'UTR-deficient, short cyclin D1 mRNA isoform was associated with high cyclin D1 levels, a high "proliferation signature" and poor prognosis. DESIGN AND METHODS: Sixty-two cases of mantle cell lymphoma were analyzed for cyclin D1 mRNA isoforms and total cyclin D1 levels by real-time reverse transcriptase polymerase chain reaction, and TP53 alterations were assessed by immunohistochemistry and molecular analysis. Results were correlated with proliferation index and clinical outcome. RESULTS: Predominance of the short cyclin D1 mRNA was found in 14 (23%) samples, including four with complete loss of the standard transcript. TP53 alterations were found in 15 (24%) cases. Predominance of 3'UTR-deficient mRNA was significantly associated with high cyclin D1 mRNA levels (P=0.009) and more commonly found in blastoid mantle cell lymphoma (5/11, P=0.060) and cases with a proliferation index of >20% (P=0.026). Both blastoid morphology (11/11, P<0.001) and TP53 alterations (15/15, P<0.001) were significantly correlated with a high proliferation index. A proliferation index of 10% was determined to be a significant threshold for survival in multivariate analysis (P=0.01). CONCLUSIONS: TP53 alterations are strongly associated with a high proliferation index and aggressive behavior in mantle cell lymphoma. Predominance of the 3'UTR-deficient transcript correlates with higher cyclin D1 levels and may be a secondary contributing factor to high proliferation, but failed to reach prognostic significance in this study.

Differentiation of morphology and reproductive traits in the house finch (Carpodacus mexicanus): a comparison between native and introduced populations

House Finches (CarpQdacqs mexiCAnuS) were introduced to Long Island, New York from southern'California in 1940. Apparently, an initial sample of less than 100 birds has given rise to a population that now occupies much of the eastern United States. This study was to determine if morphological and reproductive changes have taken place in introduced eastern birds, which have colonized a novel environment. A study area in Goleta, California (CAL) represented the parental population whereas for comparison, House Finches in St. Catharines, Ontario (ONT) represented the introduced population. Interlocality variation in 25 morphometric characters of 100 adult House Finches was examined statistically. Singleclassification analysis of variance revealed significant interlocality differentiation in seven characters of males and nine of females. Females showed differentiation in more limb elements than males. Analysis of character variation using discriminant and principal component analysis distinguished samples on the basis of variation in shape. Compared to CAL, aNT birds (especially females) had smaller extremities relative to certain core parts and weight. Females showed similar patterns of character covariation in each locality on the second principal component, which suggests that differentiation of the ONT population may not be solely environmentally induced. Sexual dimorphism was evident in four charaoters in aNT and five in CAL. Disoriminant analysis distinguished sex on the basis of variation in shape. Males possessed a relatively larger flying apparatus and small.er hind limbs than females. The dearee of sexual dimorphism did not vary sicnifioantly between looalities. 3 Data on reproduotive parameters were oolleoted in 1983 and 1984 in ONT, and 1984 in CAL. In 1984, Bouse Finohes began breedina approximately three months earlier in CAL than in ONT. In ONT, there was no sianifioant differenoe in mean olutoh initiation date between 1983 and 1984. In both looalities most nests oontained either four or five ea",s, and olutoh size differenoes between looalites were not signifioant. Seasonal deolines in olutch size were evident in ONT but not in CAL. Intralooality variation in e.g weight and size was not related to clutch size. E",g weiaht showed no seasonal trend in ONT, but inoreased sianifioantly with breed ina season in OAL. In both looalities e8'''' weiaht increased sipifioantly with order of layina in olutohes of four but not in clutohes of five. Eag's in ONT in 1983 and 1984 were sip.ificantly larser than in CAL in 1984. The modal inoubation period was 13 days and did not vary sip.ifioantly between localites. In both looalities nestling weiaht on the day of hatohing was oorrelated to fresh ega welaht. For muoh of the period between hatohing and 14 days post-hatoh, ONT nestlinas were signifioantly laraer than CAL nestlings in terms of weiaht. bill length, bill depth, and manus length.

Numerical modelling of the impact of climate change on the morphology of Saint-Lawrence tributaries

Cette thèse examine les impacts sur la morphologie des tributaires du fleuve Saint-Laurent des changements dans leur débit et leur niveau de base engendrés par les changements climatiques prévus pour la période 2010–2099. Les tributaires sélectionnés (rivières Batiscan, Richelieu, Saint-Maurice, Saint-François et Yamachiche) ont été choisis en raison de leurs différences de taille, de débit et de contexte morphologique. Non seulement ces tributaires subissent-ils un régime hydrologique modifié en raison des changements climatiques, mais leur niveau de base (niveau d’eau du fleuve Saint-Laurent) sera aussi affecté. Le modèle morphodynamique en une dimension (1D) SEDROUT, à l’origine développé pour des rivières graveleuses en mode d’aggradation, a été adapté pour le contexte spécifique des tributaires des basses-terres du Saint-Laurent afin de simuler des rivières sablonneuses avec un débit quotidien variable et des fluctuations du niveau d’eau à l’aval. Un module pour simuler le partage des sédiments autour d’îles a aussi été ajouté au modèle. Le modèle ainsi amélioré (SEDROUT4-M), qui a été testé à l’aide de simulations à petite échelle et avec les conditions actuelles d’écoulement et de transport de sédiments dans quatre tributaires du fleuve Saint-Laurent, peut maintenant simuler une gamme de problèmes morphodynamiques de rivières. Les changements d’élévation du lit et d’apport en sédiments au fleuve Saint-Laurent pour la période 2010–2099 ont été simulés avec SEDROUT4-M pour les rivières Batiscan, Richelieu et Saint-François pour toutes les combinaisons de sept régimes hydrologiques (conditions actuelles et celles prédites par trois modèles de climat globaux (MCG) et deux scénarios de gaz à effet de serre) et de trois scénarios de changements du niveau de base du fleuve Saint-Laurent (aucun changement, baisse graduelle, baisse abrupte). Les impacts sur l’apport de sédiments et l’élévation du lit diffèrent entre les MCG et semblent reliés au statut des cours d’eau (selon qu’ils soient en état d’aggradation, de dégradation ou d’équilibre), ce qui illustre l’importance d’examiner plusieurs rivières avec différents modèles climatiques afin d’établir des tendances dans les effets des changements climatiques. Malgré le fait que le débit journalier moyen et le débit annuel moyen demeurent près de leur valeur actuelle dans les trois scénarios de MCG, des changements importants dans les taux de transport de sédiments simulés pour chaque tributaire sont observés. Ceci est dû à l’impact important de fortes crues plus fréquentes dans un climat futur de même qu’à l’arrivée plus hâtive de la crue printanière, ce qui résulte en une variabilité accrue dans les taux de transport en charge de fond. Certaines complications avec l’approche de modélisation en 1D pour représenter la géométrie complexe des rivières Saint-Maurice et Saint-François suggèrent qu’une approche bi-dimensionnelle (2D) devrait être sérieusement considérée afin de simuler de façon plus exacte la répartition des débits aux bifurcations autour des îles. La rivière Saint-François est utilisée comme étude de cas pour le modèle 2D H2D2, qui performe bien d’un point de vue hydraulique, mais qui requiert des ajustements pour être en mesure de pleinement simuler les ajustements morphologiques des cours d’eau.

La morphologie du pluriel nominal du persan d’après la théorie Whole Word Morphology

Ce mémoire présente une étude de la morphologie de ce qui est généralement appelé le pluriel nominal du persan (parler de Téhéran) dans le cadre d’une théorie de la morphologie basée sur le mot : Whole Word Morphology, développée par Ford et Singh (1991). Ce modèle lexicaliste adopte une position plus forte que les modèles proposés par Aronoff (1976) et Anderson (1992) en n’admettant aucune opération morphologique sur des unités plus petites que le mot. Selon cette théorie, une description morphologique consiste en l’énumération des Stratégies de Formation de Mots (SFM), licencées chacunes par au moins deux paires de mots ayant la même covariation formelle et sémantique. Tous les SFM suit le même schéma. Nous avons répertorié 49 SFM regroupant les pluriels et les collectifs. Nous constatons qu’il est difficile de saisir le pluriel nominal du persan en tant que catégorie syntaxique et que les différentes « marques du pluriel » présentées dans la littérature ne constituent pas un ensemble homogène : elles partagent toutes un sens de pluralité qui cependant varie d’une interprétation référentielle à une interprétation collective non-référentielle. Cette étude vise la déscription de la compétence morphologique, ce qui ne dépend d’aucune considération extralinguistique. Nous argumentons notamment contre la dichotomie arabe/persan généralement admise dans la littérature. Nous avons également fourni des explications quant à la production des pluriels doubles et avons discuté de la variation supposée du fait d’un choix multiple de « marques du pluriel ».

Effect of modeling methods on the body and head-neck-trunck moments of inertia calculations in individuals of different morphology

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Sagittal sacro-pelvic morphology and spino-pelvic balance in pediatric lumbosacral spondylolisthesis : development of a postural model = Morphologie sacro-pelvienne et équilibre spino-pelvien sagittal dans le spondylolisthésis lombosacré pédiatrique : développement d'un modèle postural

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

EPDM/CIIR Blends: Compatibility, Morphology and Physical Properties

A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.

Mathematical Morphology on Hypergraphs Using Vertex-Hyperedge Correspondence

The focus of this paper is to develop computationally efficient mathematical morphology operators on hypergraphs. To this aim we consider lattice structures on hypergraphs on which we build morphological operators. We develop a pair of dual adjunctions between the vertex set and the hyperedge set of a hypergraph , by defining a vertex-hyperedge correspondence. This allows us to recover the classical notion of a dilation/erosion of a subset of vertices and to extend it to subhypergraphs of . This paper also studies the concept of morphological adjunction on hypergraphs for which both the input and the output are hypergraphs

Vegetative and reproductive morphology of Kallymenia patens (Kallymeniaceae, Rhodophyta) in the Mediterranean Sea

Reproductive morphology of the Mediterranean red alga Kallymenia patens is described for the first time, confirming its position in the genus. K. patens is characterized by a non-procarpic female reproductive apparatus, carpogonial branch systems consisting of supporting cells bearing both three-celled carpogonial branches and subsidiary cells that lack a hypogynous cell and carpogonium; fusion cells develop numerous connecting filaments, and tetrasporangia are scattered over the thallus and are probably cruciately divided. Old fertile spathulate specimens of K. patens are morphologically similar to K. spathulata, but they can be distinguished by the length of spathulated proliferations (up to 0.6 cm and 6 cm, respectively), the length of inner cortical cells (up to 70 and 30 μm, respectively), and the gonimoblast location (in proliferations from the perennial part of the blade and over all the thallus surface, respectively)

Human morphology from morphology

The purpose of this article is to explain the grammatical rules of the Nomina Anatomica. Meanwhile, there is a new synchronic formulation to the Nomina Anatomica, according to systematic cases and Latin declinations with applications to the entity of the human body, and very important indications about the diachronic grammar. Therefore, the morphologic grammar plays a very important role to the interpretations of Human Anatomy

The morphology and reproductive structures of Mediterranean species of the genus Nemastoma J. Agardh, nom. cons. (Nemastomataceae, Nemastomatales): Nemastoma dichotomum and N. dumontioides

The morphology and reproductive structures of Mediterranean species of the genus Nemastoma J. Agardh, nom. cons. (Nemastomataceae, Nemastomatales): Nemastoma dichotomum and N. dumontioides