Teaching motivational interviewing to medical students : a pre-post test pilot study

Objective: To test the efficacy of teaching motivational interviewing (MI) to medical students. Methods: Thirteen 4th year medical students volunteered to participate. Seven days before and 7 days after an 8-hour interactive training MI workshop, each student performed a videorecorded interview with two standardized patients: a 60 year old alcohol dependent woman and a 50 year old cigarette smoking man. Students' counseling skills were coded by two blinded clinicians using the Motivational Interviewing Treatment Integrity 3.0 (MITI). Inter-rater reliability was calculated for all interviews and a test-retest was completed in a sub-sample of 10 consecutive interviews three days apart. Difference between MITI scores before and after training were calculated and tested using non-parametric tests. Effect size was approximated by calculating the probability that posttest scores are greater than pretest scores (P*=P(Pre<Post)+1/2P(Pre=Post)), P*>1/2 indicating greater scores in posttest, P*=1/2 no effect, and P*<1/2 smaller scores in posttest. Results: Median differences between MITI scores before and after MI training indicated a general progression in MI skills: MI spirit global score (median difference=1.5, Inter quartile range=1.5, p<0.001, P*=0.90); Empathy global score (med diff=1, IQR=0.5, p<0.001, P*=0.85); Percentage of MI adherent skills (med diff=36.6, IQR=50.5, p<0.001, P*=0.85); Percentage of open questions (med diff=18.6, IQR=21.6, p<0.001, P*=0.96); reflections/ questions ratio (med diff=0.2, IQR=0.4, p<0.001, P*=0.81). Only Direction global score and the percentage of complex reflections were not significantly improved (med diff=0, IQR=1, p=0.53, P*=0.44, and med diff=4.3, IQR=24.8, p=0.48, P*=0.62, respectively). Inter-rater reliability indicated weighted kappa ranged between 0.14 for Direction to 0.51 for Collaboration and ICC ranged between 0.28 for Simple reflection to 0.95 for Closed question. Test-retests indicated weighted kappa ranged between 0.27 for Direction to 0.80 for Empathy and ICC ranged between 0.87 for Complex reflection to 0.98 for Closed question. Conclusion: This pilot study indicated that an 8-hour training in MI for voluntary 4th year medical students resulted in significant improvement of MI skills. Larger sample of unselected medical students should be studied to generalize the benefit of MI training to medical students. Interrater reliability and test-retests suggested that coders' training should be intensified.

Nine-month-olds' triangular interactive strategies with their parents' couple in low-coordination families: A descriptive study

Observing infants in triadic situations has revealed their triangular competence; namely, their ability to interact with both parents by simultaneously sharing their attention and affects with them. Infants' triangular interaction is linked with the coparenting unit's degree of coordination; in high-coordination (HC) families, parents act as a team in relation to the child, thus drawing clear and flexible boundaries with them; in low-coordination (LC) families, parents either avoid direct interaction with each other and include the child in their unit or join together against the child and exclude him or her, thus drawing inconsistent boundaries with the child. We explored the interactive strategies of LC 9-month-olds (n = 15) with those of their parents, comparing them with HC parents (n = 23) in two conditions: playing with both parents at the same time and witnessing their parents' dialogue. LC infants' affects were less positive; they addressed fewer positive triangular bids to their parents and tended to use a less triangular interactive mode. Thus, LC infants had fewer opportunities than did HC infants to acquire skills necessary for coping with triangular interaction. L'observation de nourrissons dans des situations triadiques a révélé leur compétence triangulaire, c'est-à-dire la capacité à interagir avec les deux parents en partageant simultanément leur attention et leurs affects avec eux. L'interaction triangulaire des nourrissons est liée au degré de coordination de l'unité de coparentage. Dans les familles à coordination élevée (abrégé HC en anglais, CE en français), les parents agissent en relation à l'enfant en tant qu'équipe, et établissent donc des limites claires et flexibles avec les enfants. Dans les familles à coordination faible (abrégé LC en anglais, CF en français), les parents évitent soit l'interaction directe l'un avec l'autre et incluent l'enfant dans leur unité, ou bien ils se liguent contre l'enfant et l'excluent, établissant donc des limites contradictoires avec l'enfant. Nous explorons les stratégies interactives de bébés de 9 mois CF avec celle de leurs parents, en les comparant avec des parents CE (N = 23) dans deux conditions: le jeu avec les deux parents au même moment et l'observation du dialogue des parents. Les affects des bébés CF étaient moins positifs. Les bébés se tournaient moins triangulairement vers leurs parents et avaient tendance à utiliser un mode interactif moins triangulaire. Les bébés CF avaient donc moins de chances que les bébés CE d'acquérir les compétences nécessaires pour faire face avec une interaction triangulaire.

Assessment of transcript reconstruction methods for RNA-seq.

We evaluated 25 protocol variants of 14 independent computational methods for exon identification, transcript reconstruction and expression-level quantification from RNA-seq data. Our results show that most algorithms are able to identify discrete transcript components with high success rates but that assembly of complete isoform structures poses a major challenge even when all constituent elements are identified. Expression-level estimates also varied widely across methods, even when based on similar transcript models. Consequently, the complexity of higher eukaryotic genomes imposes severe limitations on transcript recall and splice product discrimination that are likely to remain limiting factors for the analysis of current-generation RNA-seq data.

An evaluation of new parsimony-based versus parametric inference methods in biogeography: a case study using the globally distributed plant family Sapindaceae

Aim  Recently developed parametric methods in historical biogeography allow researchers to integrate temporal and palaeogeographical information into the reconstruction of biogeographical scenarios, thus overcoming a known bias of parsimony-based approaches. Here, we compare a parametric method, dispersal-extinction-cladogenesis (DEC), against a parsimony-based method, dispersal-vicariance analysis (DIVA), which does not incorporate branch lengths but accounts for phylogenetic uncertainty through a Bayesian empirical approach (Bayes-DIVA). We analyse the benefits and limitations of each method using the cosmopolitan plant family Sapindaceae as a case study.Location  World-wide.Methods  Phylogenetic relationships were estimated by Bayesian inference on a large dataset representing generic diversity within Sapindaceae. Lineage divergence times were estimated by penalized likelihood over a sample of trees from the posterior distribution of the phylogeny to account for dating uncertainty in biogeographical reconstructions. We compared biogeographical scenarios between Bayes-DIVA and two different DEC models: one with no geological constraints and another that employed a stratified palaeogeographical model in which dispersal rates were scaled according to area connectivity across four time slices, reflecting the changing continental configuration over the last 110 million years.Results  Despite differences in the underlying biogeographical model, Bayes-DIVA and DEC inferred similar biogeographical scenarios. The main differences were: (1) in the timing of dispersal events - which in Bayes-DIVA sometimes conflicts with palaeogeographical information, and (2) in the lower frequency of terminal dispersal events inferred by DEC. Uncertainty in divergence time estimations influenced both the inference of ancestral ranges and the decisiveness with which an area can be assigned to a node.Main conclusions  By considering lineage divergence times, the DEC method gives more accurate reconstructions that are in agreement with palaeogeographical evidence. In contrast, Bayes-DIVA showed the highest decisiveness in unequivocally reconstructing ancestral ranges, probably reflecting its ability to integrate phylogenetic uncertainty. Care should be taken in defining the palaeogeographical model in DEC because of the possibility of overestimating the frequency of extinction events, or of inferring ancestral ranges that are outside the extant species ranges, owing to dispersal constraints enforced by the model. The wide-spanning spatial and temporal model proposed here could prove useful for testing large-scale biogeographical patterns in plants.

Rehabilitation of Concrete Pavements Utilizing Rebblization and Crack and Seat Methods, June 2005

Deterioration in portland cement concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. However, the design of structural overlay thickness for cracked and seated and rubblized pavements is difficult as the resulting structure is neither a “true” rigid pavement nor a “true” flexible pavement. Existing design methodologies use the empirical procedures based on the AASHO Road Test conducted in 1961. But, the AASHO Road Test did not employ any fractured slab technique, and there are numerous limitations associated with extrapolating its results to HMA overlay thickness design for fractured PCC pavements. The main objective of this project is to develop a mechanistic-empirical (ME) design approach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program. A partial validation of the design method with reference to an instrumented trial project (IA-141, Polk County) in Iowa is provided in this report. Tensile strain values at the bottom of the HMA layer collected from the FWD testing at this project site are in agreement with the results obtained from the developed computer program.

Evaluation of Transverse Joint Forming Methods for PCC Pavement, January 2006

The members of the Iowa Concrete Paving Association, the National Concrete Pavement Technology Center Research Committee, and the Iowa Highway Research Board commissioned a study to examine alternative ways of developing transverse joints in portland cement concrete pavements. The present study investigated six separate variations of vertical metal strips placed above and below the dowels in conventional baskets. In addition, the study investigated existing patented assemblies and a new assembly developed in Spain and used in Australia. The metal assemblies were placed in a new pavement and allowed to stay in place for 30 days before the Iowa Department of Transportation staff terminated the test by directing the contractor to saw and seal the joints. This report describes the design, construction, testing, and conclusions of the project.

Evaluation of U.S. and European Concrete Pavement Noise Reduction Methods, July 2006

Highway noise is one of the most pressing of the surface characteristics issues facing the concrete paving industry. This is particularly true in urban areas, where not only is there a higher population density near major thoroughfares, but also a greater volume of commuter traffic (Sandberg and Ejsmont 2002; van Keulen 2004). To help address this issue, the National Concrete Pavement Technology Center (CP Tech Center) at Iowa State University (ISU), Federal Highway Administration (FHWA), American Concrete Pavement Association (ACPA), and other organizations have partnered to conduct a multi-part, seven-year Concrete Pavement Surface Characteristics Project. This document contains the results of Part 1, Task 2, of the ISU-FHWA project, addressing the noise issue by evaluating conventional and innovative concrete pavement noise reduction methods. The first objective of this task was to determine what if any concrete surface textures currently constructed in the United States or Europe were considered quiet, had long-term friction characteristics, could be consistently built, and were cost effective. Any specifications of such concrete textures would be included in this report. The second objective was to determine whether any promising new concrete pavement surfaces to control tire-pavement noise and friction were in the development stage and, if so, what further research was necessary. The final objective was to identify measurement techniques used in the evaluation.

Integrative Review: Concepts And Methods Used In Nursing


Integrative review (IR) has an international reputation in nursing research and evidence-based practice. This IR aimed at identifying and analyzing the concepts and methods recommended to undertaking IR in nursing. Nine information resources,including electronic databases and grey literature were searched. Seventeen studies were included. The results indicate that: primary studies were mostly from USA; it is possible to have several research questions or hypotheses and include primary studies in the review from different theoretical and methodological approaches; it is a type of review that can go beyond the analysis and synthesis of findings from primary studies allowing exploiting other research dimensions, and that presents potentialities for the development of new theories and new problems for research. Conclusion: IR is understood as a very complex type of review and it is expected to be developed using standardized and systematic methods to ensure the required rigor of scientific research and therefore the legitimacy of the established evidence.


On Consumer Decision Strategies: New Approaches for Studying and Aiding Preferential Choices

This dissertation focuses on the strategies consumers use when making purchase decisions. It is organized in two main parts, one centering on descriptive and the other on applied decision making research. In the first part, a new process tracing tool called InterActive Process Tracing (IAPT) is pre- sented, which I developed to investigate the nature of consumers' decision strategies. This tool is a combination of several process tracing techniques, namely Active Information Search, Mouselab, and retrospective verbal protocol. To validate IAPT, two experiments on mobile phone purchase de- cisions were conducted where participants first repeatedly chose a mobile phone and then were asked to formalize their decision strategy so that it could be used to make choices for them. The choices made by the identified strategies correctly predicted the observed choices in 73% (Experiment 1) and 67% (Experiment 2) of the cases. Moreover, in Experiment 2, Mouselab and eye tracking were directly compared with respect to their impact on information search and strategy description. Only minor differences were found between these two methods. I conclude that IAPT is a useful research tool to identify choice strategies, and that using eye tracking technology did not increase its validity beyond that gained with Mouselab. In the second part, a prototype of a decision aid is introduced that was developed building in particular on the knowledge about consumers' decision strategies gained in Part I. This decision aid, which is called the InterActive Choice Aid (IACA), systematically assists consumers in their purchase decisions. To evaluate the prototype regarding its perceived utility, an experiment was conducted where IACA was compared to two other prototypes that were based on real-world consumer decision aids. All three prototypes differed in the number and type of tools they provided to facilitate the process of choosing, ranging from low (Amazon) to medium (Sunrise/dpreview) to high functionality (IACA). Overall, participants slightly preferred the prototype of medium functionality and this prototype was also rated best on the dimensions of understandability and ease of use. IACA was rated best regarding the two dimensions of ease of elimination and ease of comparison of alternatives. Moreover, participants choices were more in line with the normatively oriented weighted additive strategy when they used IACA than when they used the medium functionality prototype. The low functionality prototype was the least preferred overall. It is concluded that consumers can and will benefit from highly functional decision aids like IACA, but only when these systems are easy to understand and to use.

DNR Interactive Mapping: A tool for Iowa Agriculture, 2006

The planning tools you need to improve both your farming operation and Iowa’s streams and lakes are right at your fingertips. With DNR interactive mapping online, you can access a large amount of information for free and without special software.

Computational fluid dynamics of the right ventricular outflow tract and of the pulmonary artery: a bench model of flow dynamics.

OBJECTIVES: The reconstruction of the right ventricular outflow tract (RVOT) with valved conduits remains a challenge. The reoperation rate at 5 years can be as high as 25% and depends on age, type of conduit, conduit diameter and principal heart malformation. The aim of this study is to provide a bench model with computer fluid dynamics to analyse the haemodynamics of the RVOT, pulmonary artery, its bifurcation, and left and right pulmonary arteries that in the future may serve as a tool for analysis and prediction of outcome following RVOT reconstruction. METHODS: Pressure, flow and diameter at the RVOT, pulmonary artery, bifurcation of the pulmonary artery, and left and right pulmonary arteries were measured in five normal pigs with a mean weight of 24.6 ± 0.89 kg. Data obtained were used for a 3D computer fluid-dynamics simulation of flow conditions, focusing on the pressure, flow and shear stress profile of the pulmonary trunk to the level of the left and right pulmonary arteries. RESULTS: Three inlet steady flow profiles were obtained at 0.2, 0.29 and 0.36 m/s that correspond to the flow rates of 1.5, 2.0 and 2.5 l/min flow at the RVOT. The flow velocity profile was constant at the RVOT down to the bifurcation and decreased at the left and right pulmonary arteries. In all three inlet velocity profiles, low sheer stress and low-velocity areas were detected along the left wall of the pulmonary artery, at the pulmonary artery bifurcation and at the ostia of both pulmonary arteries. CONCLUSIONS: This computed fluid real-time model provides us with a realistic picture of fluid dynamics in the pulmonary tract area. Deep shear stress areas correspond to a turbulent flow profile that is a predictive factor for the development of vessel wall arteriosclerosis. We believe that this bench model may be a useful tool for further evaluation of RVOT pathology following surgical reconstructions.