Autoclave Cure Simulation of Composite Structures Applying Implicit and Explicit FE

Simulation of the autoclave manufacturing technique of composites can yield a preliminary estimation of induced residual thermal stresses and deformations that affect component fatigue life, and required tolerances for assembly. In this paper, an approach is proposed to simulate the autoclave manufacturing technique for unidirectional composites. The proposed approach consists of three modules. The first module is a Thermo-chemical model to estimate the temperature and the degree of cure distributions in the composite part during the cure cycle. The second and third modules are a sequential stress analysis using FE-Implicit and FE-Explicit respectively. User-material subroutine is used to model the Viscoelastic properties of the material based on theory of micromechanics.

Virtual Manufacturing of Composite Structures Applying Implicit and Explicit FE Techniques

Virtual manufacturing of composites can yield an initial early estimation of the induced residual thermal stresses that affect component fatigue life, and deformations that affect required tolerances for assembly. Based on these estimation, the designer can make early decisions, which can help in reducing cost, regarding changes in part design or material properties. In this paper, an approach is proposed to simulate the autoclave manufacturing technique for unidirectional composites. The proposed approach consists of three modules. The first module is a Thermochemical model to estimate temperature and the degree of cure distributions in the composite part during the cure cycle. The second and third modules are stress analysis using FE-Implicit and FE-Explicit respectively. User-material subroutine will be used to model the Viscoelastic properties of the material based on micromechanical theory. Estimated deformation of the composite part can be corrected during the autoclave process by modifying the process-tool design. The deformed composite surface is sent to CATIA for design modification of the process-tool.

Magneto-optical trapping and background-free imaging for atoms near nanostructured surfaces

We demonstrate a combined magneto-optical trap and imaging system that is suitable for the investigation of cold atoms near surfaces. In particular, we are able to trap atoms close to optically scattering surfaces and to image them with an excellent signal-to-noise ratio. We also demonstrate a simple magneto-optical atom cloud launching method. We anticipate that this system will be useful for a range of experimental studies of novel atom-surface interactions and atom trap miniaturization.

Imagining intergroup contact reduces implicit prejudice

Recent research has demonstrated that imagining intergroup contact can be sufficient to reduce explicit prejudice directed towards out-groups. In this research, we examined the impact of contact-related mental imagery on implicit prejudice as measured by the implicit association test. We found that, relative to a control condition, young participants who imagined talking to an elderly stranger subsequently showed more positive implicit attitudes towards elderly people in general. In a second study, we demonstrated that, relative to a control condition, non-Muslim participants who imagined talking to a Muslim stranger subsequently showed more positive implicit attitudes towards Muslims in general. We discuss the implications of these findings for furthering the application of indirect contact strategies aimed at improving intergroup relations.

Citizenship Attributes as the Basis for Intergroup Differentiation:Implicit and Explicit Intergroup Evaluations

Recent research (e.g. Barnes, Auburn & Lee, 2004) suggests that citizenship opportunities and resources may be afforded or denied to individuals according to their group memberships. We consider how the generic processes of intergroup differentiation by which groups are socially devalued and excluded can reflect divergent conceptualizations of citizenship among different groups. As part of a wider investigation of social exclusion, a combination of methods was used to investigate the relative intergroup perceptions of residents from more and less affluent areas in Limerick city, Ireland. Participants (n=214) completed the implicit association test and rated a fictional character on a series of citizenship-relevant dimensions. All participants displayed negative
implicit associations with designated disadvantaged areas in Limerick. The results of the explicit prejudice assessment illustrated that these negative associations are matched by a lower overall attribution of positive characteristics to residents from these areas relative to residents from a more affluent area. On examination of each group’s relative rating of traits, residents from less affluent
areas appear doubly disadvantaged as they are devalued in terms of both outgroup and ingroup understandings of citizenship attributes.

Lichen-induced biomodification of calcareous surfaces: Bioprotection versus biodeterioration

Studies demonstrate the active and passive capability of lichens to inhibit or retard the weathering of calcareous surfaces. Lichen coverage may actively protect a surface through shielding by the thallus and the binding and waterproofing of the rock surface and subsurface by fungal hyphae. Passive protection of rock surfaces may be induced by the formation of an insoluble encrustation, such as calcium oxalate, at the lichen-rock interface. Recent research suggests that the decay of hyphae, induced by changes in microenvironmental conditions, necrosis, parasitism or the natural physiological traits of particular lichen species, may expose a chemically and physically weakened substrate to dissolution triggering relatively rapid weathering-related surface lowering. Consequently, certain epilithic crustose and endolithic lichens may induce a period of surface stability throughout the course of their lifespan, followed by a phase of instability and rapid episodic microtopographical evolution after death and decay. A series of conceptual models is proposed to illustrate this idea over short (single lichen lifespan) and long (multiple lichen lifespans) timescales. The models suggest that the microscale biogeomorphological system of lichen-rock interaction is underpinned by nonlinear dynamical system theory as it exhibits dynamical instability and is consequently difficult to predict over a long timescale. Dominance by biodeterioration or bioprotection may be altered by changes in lichen species or in environmental conditions over time.

Mapping stone surface temperature fluctuations: Implications for lichen distribution and biomodification on historic stone surfaces

The exposure of historic stone to processes of lichen-induced surface biomodification is determined, first and foremost, by the bioreceptivity of those surfaces to lichen colonization. As an important component of surface bioreceptivity, spatiotemporal variation in stone surface temperature plays a critical role in the spatial distribution of saxicolous lichen on historic stone structures, especially within seasonally hot environments. The ornate limestone and tufa stairwell of the Monastery of Cartuja (1516), Granada, Spain, exhibits significant aspect-related differences in lichen distribution. Lichen coverage and
diurnal fluctuations in stone surface temperature on the stairwell were monitored and mapped, under anticyclonic conditions in summer and winter, using an infrared thermometer and Geographical Information Systems approach. This research suggests that it is not extreme high surface temperatures that
determine the presence or absence of lichen coverage on stonework. Instead, average stone surface temperatures
over the course of the year seem to play a critical role in determining whether or not surfaces are receptive to lichen colonization and subsequent biomodification. It is inferred that lichen, capable of surviving extreme surface temperatures during the Mediterranean summer in an ametabolic state, require a respite period of lower temperatures within which they can metabolize, grow and reproduce.
The higher the average annual temperature a surface experiences, the shorter the respite period for any lichen potentially inhabiting that surface. A critical average temperature threshold of approximately 21 ?C has been identified on the stairwell, with average stone surface temperatures greater than this
generally inhibiting lichen colonization. A brief visual condition assessment between lichen-covered and lichen-free surfaces on the limestone sections of the stairwell suggests relative bioprotection induced by lichen coverage, with stonework quality and sharpness remaining more defined beneath lichen-covered surfaces. The methodology employed in this paper may have further applications in the monitoring and mapping of thermal stress fatigue on historic building materials.

Regulation of arsenic mobility on basaltic glass surfaces by speciation and pH

The importance of geothermal energy as a source for electricity generation and district heating has increased over recent decades. Arsenic can be a significant constituent of the geothermal fluids pumped to the surface during power generation. Dissolved As exists in different oxidation states, mainly as As(III) and As(V), and the charge of individual species varies with pH. Basaltic glass is one of the most important rock types in many high-temperature geothermal fields. Static batch and dynamic column experiments were combined to generate and validate sorption coefficients for As(III) and As(V) in contact with basaltic glass at pH 3-10. Validation was carried out by two empirical kinetic models and a surface complexation model (SCM). The SCM provided a better fit to the experimental column data than kinetic models at high pH values. However, in certain circumstances, an adequate estimation of As transport in the column could not be attained without incorporation of kinetic reactions. The varying mobility with pH was due to the combined effects of the variable charge of the basaltic glass with the pH point of zero charge at 6.8 and the individual As species as pH shifted, respectively. The mobility of As(III) decreased with increasing pH. The opposite was true for As(V), being nearly immobile at pH 3 to being highly mobile at pH 10. Incorporation of appropriate sorption constants, based on the measured pH and Eh of geothermal fluids, into regional groundwater-flow models should allow prediction of the As(III) and As(V) transport from geothermal systems to adjacent drinking water sources and ecosystems.

Density Functional Theory Study on the Cleavage Mechanism of the Carbonyl Bond in Amides on Flat and Stepped Ru Surfaces: Hydrogen-Induced or Direct C-O Bond Breaking?

We have performed density functional theory (DFT) calculations to investigate the reaction mechanism of the cleavage of the carbonyl bond in amides on both flat and stepped Ru surfaces. The simplest amide molecule, N,N-dimethylacetamide (DMA), was used as the exemplar model molecule. Through the calculations, the most stable transition states (TSs) in all the pathways on both flat and stepped Ru surfaces are identified. Comparing the energy profiles of different reaction pathways, we find that a direct cleavage mechanism is always energetically favored as compared with an alternative hydrogen-induced mechanism on either the flat or stepped Ru surface. It is easier for the dissociation process to occur on the stepped surface than on the flat surface. However, as compared with the terrace, the superiority of step sites boosting the C-O bond dissociation is not as evident as that on CO dissociation.

Programmable motion and separation of single magnetic particles on patterned magnetic surfaces

Motion of single micrometer-sized magnetic particles on patterned magnetic surfaces is controlled by a rotating magnetic field (see Figure and cover). Patterns of thin-film magnetic elements are tailored to form transport lines. Individual particles are separated by adding junctions to the transport lines. The method can improve existing applications in biotechnology and generate new ones in life sciences.