Polyaniline/layered zirconium phosphate nanocomposites: Secondary-like doped polyaniline obtained by the layer-by-layer technique

In the present work, nanocomposites of polyaniline (PANI) and layered alpha-Zr(HPO4)(2).H2O (alpha-ZrP) were prepared using two different approaches: (i) the in situ aniline polymerization in the presence of the layered inorganic material and (ii) the layer-by-layer (LBL) assembly using an aqueous solution of the polycation emeraldine salt (ES-PANI) and a dispersion of exfoliated negative slabs of alpha-ZrP. These materials were characterized spectroscopically using mainly resonance Raman scattering at four exciting radiations and electronic absorption in the UV-VIS-NIR region. Structural and textural characterizations were carried out using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The polymer obtained by the in situ aniline polymerization is located primarily in the external surface of the inorganic material although aniline monomers were intercalated between alpha-ZrP interlayer regions before oxidative polymerization. Through resonance Raman spectroscopy, it was observed that the formed polymer has semiquinone units (ES-PANI) and also azo bonds (-N = N-), showing that this method results in a polymer with a different structure from the usual ""head-to-tail"" ES-PANI. The LBL assembly of pre-formed ES-PANI and exfoliated alpha-ZrP particles produces homogeneous films with reproducible deposition from layer to layer, up to 20 bilayers. Resonance Raman (lambda(0) = 632.8 nm) spectrum of PANI/ZrP LBL film shows an enhancement in the intensity of the polaronic band at 1333 cm(-1) (nu C-N center dot+) and the decrease of the band intensity at 1485 cm(-1) compared to bulk ES-PANI. Its UV-VIS-NIR spectrum presents an absorption tail in the NIR region assigned to delocalized free charge carrier. These spectroscopic features are characteristic of highly conductive secondary doped PANI suggesting that polymeric chains in PANI/ZrP LBL film have a more extended conformation than in bulk ES-PANI.

Tailored Media for Homogeneous Cellulose Chemistry: Ionic Liquid/Co-Solvent Mixtures

Co-solvents can minimize two of the major problems associated with the use of ionic liquids (ILs) as solvents for homogeneous derivatization of cellulose: high viscosity and limited miscibility with non-polar reagents or reaction products. Thus, the effects of 18 solvents and 3 binary solvent mixtures on cellulose solutions in three ILs were systematically studied with respect to the solution phase behavior. The applicable limits of these mixtures were evaluated and general guidelines for the use of co-solvents in cellulose chemistry could be advanced: Appropriate co-solvents should have EN T values (normalized empirical polarity) > 0.3, very low ``acidity`` (alpha < 0.5), and relatively high ""basicity`` (beta >= 0.4). Moreover, novel promising co-solvents and binary co-solvent mixtures were identified.

Simple telemedicine for developing regions: Camera phones and paper-based microfluidic devices for real-time, off-site diagnosis

This article describes a prototype system for quantifying bioassays and for exchanging the results of the assays digitally with physicians located off-site. The system uses paper-based microfluidic devices for running multiple assays simultaneously, camera phones or portable scanners for digitizing the intensity of color associated with each colorimetric assay, and established communications infrastructure for transferring the digital information from the assay site to an off-site laboratory for analysis by a trained medical professional; the diagnosis then can be returned directly to the healthcare provider in the field. The microfluidic devices were fabricated in paper using photolithography and were functionalized with reagents for colorimetric assays. The results of the assays were quantified by comparing the intensities of the color developed in each assay with those of calibration curves. An example of this system quantified clinically relevant concentrations of glucose and protein in artificial urine. The combination of patterned paper, a portable method for obtaining digital images, and a method for exchanging results of the assays with off-site diagnosticians offers new opportunities for inexpensive monitoring of health, especially in situations that require physicians to travel to patients (e.g., in the developing world, in emergency management, and during field operations by the military) to obtain diagnostic information that might be obtained more effectively by less valuable personnel.

Geoprocessing journey-to-work data : delineating commuting regions in Dalarna, Sweden

Delineation of commuting regions has always been based on statistical units, often municipalities or wards. However, using these units has certain disadvantages as their land areas differ considerably. Much information is lost in the larger spatial base units and distortions in self-containment values, the main criterion in rule-based delineation procedures, occur. Alternatively, one can start from relatively small standard size units such as hexagons. In this way, much greater detail in spatial patterns is obtained. In this paper, regions are built by means of intrazonal maximization (Intramax) on the basis of hexagons. The use of geoprocessing tools, specifically developed for the processing ofcommuting data, speeds up processing time considerably. The results of the Intramax analysis are evaluated with travel-to-work area constraints, and comparisons are made with commuting fields, accessibility to employment, commuting flow density and network commuting flow size. From selected steps in the regionalization process, a hierarchy of nested commuting regions emerges, revealing the complexity of commuting patterns.

Biophysical Regions of Maine

http://digitalcommons.colby.edu/atlasofmaine2009/1016/thumbnail.jpg

Essays on the general equilibrium effects of barriers to trade on economic growth, foreign trade and the location of economic activity in Brazil

This work presents a fully operational interstate CGE model implemented for the Brazilian economy that tries to quantify both the role of barriers to trade on economic growth and foreign trade performance and how the distribution of the economic activity may change as the country opens up to foreign trade. Among the distinctive features embedded in the model, modeling of external scale economies, port efficiency and land-maritime transport costs provides an innovative way of dealing explicitly with theoretical issues related to integrated regional systems. In order to illustrate the role played by the quality of infrastructure and geography on the country‟s foreign and interregional trade performance, a set of simulations is presented where barriers to trade are significantly reduced. The relative importance of trade policy, port efficiency and land-maritime transport costs for the country trade relations and regional growth is then detailed and quantified, considering both short run as well as long run scenarios. A final set of simulations shed some light on the effects of liberal trade policies on regional inequality, where the manufacturing sector in the state of São Paulo, taken as the core of industrial activity in the country, is subjected to different levels of external economies of scale. Short-run core-periphery effects are then traced out suggesting the prevalence of agglomeration forces over diversion forces could rather exacerbate regional inequality as import barriers are removed up to a certain level. Further removals can reverse this balance in favor of diversion forces, implying de-concentration of economic activity. In the long run, factor mobility allows a better characterization of the balance between agglomeration and diversion forces among regions. Regional dispersion effects are then clearly traced-out, suggesting horizontal liberal trade policies to benefit both the poorest regions in the country as well as the state of São Paulo. This long run dispersion pattern, on one hand seems to unravel the fragility of simple theoretical results from recent New Economic Geography models, once they get confronted with more complex spatially heterogeneous (real) systems. On the other hand, it seems to capture the literature‟s main insight: the possible role of horizontal liberal trade policies as diversion forces leading to a more homogeneous pattern of interregional economic growth.

Regional subsidies and industrial prospects of lagging regions

Large and sustained differences in economic performance across regions of developing countries have long provided motivation for fiscal incentives designed to encourage firm entry in lagging areas. Empirical evidence in support of these policies has, however, been weak at best. This paper undertakes a direct evaluation of the most prominent fiscal incentive policy in Brazil, the Fundos Constitucionais de Financiamento (Constitutional Funds). In doing so, we exploit valuable features of the Brazilian Ministry of Labor's RAIS data set to address two important elements of firm location decisions that have the potential to bias an assessment of the Funds: (i) firm “family structure” (in particular, proximity to headquarters for vertically integrated firms), and (ii) unobserved spatial heterogeneity (with the potential to confound the effects of the Funds). We find that the pull of firm headquarters is very strong relative to the Constitutional Funds for vertically integrated firms, but that, with non-parametric controls for time invariant spatial heterogeneity, the Funds provide statistically and economically significant incentives for firms in many of the targeted industries.

Processo alternativo de catch-up em indústrias intensivas em recursos naturais: uma análise empírica da trajetória tecnológica da indústria de bioetanol de cana-de-açúcar no Brasil

Esta tese diz respeito ao desenvolvimento tecnológico e inovação em indústrias intensivas em recursos naturais no contexto de economias emergentes. A tese explora como a acumulação de capacidades tecnológicas e os mecanismos de aprendizagem influenciaram a trajetória tecnológica na indústria de bioetanol de cana-de-açúcar no Brasil, durante o período de meados da década de 1970 a 2014. Muito se avançou na compreensão do processo de catch-up tecnológico de empresas e indústrias de economias emergentes. Contudo, essas pesquisas geralmente exploram o processo de catch-up tecnológico relacionado às trajetórias tecnológicas já mapeadas pelos líderes mundiais em indústrias de manufatura e transformação. Parte desses estudos ignora que o desenvolvimento de atividades industriais poderia ocorrer em indústrias intensivas em recursos naturais. Além disso, indústrias intensivas em recursos naturais são geralmente encapsuladas como commodities e low-tech, caracterizadas por uma limitada oportunidade de aprendizagem tecnológica e acumulação de capacidades tecnológicas. Entretanto, o processo de industrialização em indústrias intensivas em recursos naturais em regiões como a América Latina ainda é pouco compreendido e são escassas as pesquisas que investigam o processo de catch-up tecnológico em nível de indústria, com raras exceções. Baseando-se em evidências da indústria de bioetanol do Brasil, esta pesquisa explora um processo de catch-up tecnológico que tem recebido pouca atenção na literatura. Esta pesquisa adotou um desenho qualitativo com base em uma estratégia de estudo de caso em nível de indústria, com extensivo trabalho de campo e coleta de evidências empíricas de primeira mão com cobertura de longo prazo em 20 organizações. Esta pesquisa encontrou que: (1) a evolução da trajetória tecnológica da indústria de bioetanol no Brasil caracterizou-se pela abertura de uma direção distinta daquela mapeada por líderes tecnológicos existentes. Esse processo de desvio qualitativo da trajetória tecnológica dominante iniciou durante os primeiros estágios de desenvolvimento tecnológico. Assim, a indústria percorreu uma trajetória de entrada precoce em path-creating; (2) a evolução dessa trajetória tecnológica não se deu de maneira homogenia. Foram encontrados três padrões relativamente distintos de acumulação de capacidades tecnológicas para funções (ou áreas) tecnológicas específicas: feedstock, processos agrícolas e processos industriais. Nas funções de feedstock e processos industriais, houve acumulação de capacidades tecnológicas de liderança mundial, enquanto na função processos agrícolas a acumulação de capacidades tecnológicas não evoluiu além do nível intermediário; (3) essas capacidades foram acumuladas de forma dispersa entre os atores da indústria (empresas produtoras, institutos de pesquisa, universidades, fornecedores, empresas de biotecnologia etc.) e possibilitaram a abertura de oportunidades de exploração de novos negócios, ainda que modestamente aproveitadas; e (4) a sutil heterogeneidade encontrada nos padrões de acumulação de capacidades tecnológicas foi influenciada pela combinação de mecanismos de aprendizagem tecnológica utilizados pela indústria ao longo do tempo. Por fim, constatou-se também que essa trajetória tecnológica contribuiu para gerar implicações significativas e foi também influenciada por fatores outros. Não obstante, esses resultados merecem esforço de investigação mais sistemático, uma vez que foram examinados aqui de forma superficial. Concluiu-se, portanto, que posições tecnológicas relevantes, especialmente por indústrias de economias emergentes, podem ser alcançadas por meio de trajetórias tecnológicas que não se baseiam, necessariamente, em tecnologias dominantes, já exploradas por líderes mundiais, de economias avançadas. Assim, os processos alternativos de catch-up podem ser altamente relevantes para a obtenção de progresso industrial. Ademais, a pesquisa concluiu que as indústrias intensivas em recursos naturais oferecem oportunidades para inovações significativas, e podem ser protagonistas nesse processo de catch-up alternativo, particularmente no contexto de países abundantes em recursos naturais. Assim sendo, esta pesquisa contribui para gerar novas evidências e explicações que nos ajudem a ampliar a noção de alternativas para o desenvolvimento industrial e econômico no contexto de economias emergentes. No debate sobre desenvolvimento industrial e econômico, as trajetórias tecnológicas alternativas, bem como as indústrias intensivas em recursos naturais, deveriam receber uma atenção especial por parte de decisores de políticas públicas e de ações empresariais.

Effect of price and in-store promotion on sales: a study of distinct regions in an emerging market

Increasing competition caused by globalization, high growth of some emerging markets and stagnation of developed economies motivate Consumer Packaged Goods (CPGs) manufacturers to drive their attention to emerging markets. These companies are expected to adapt their marketing activities to the particularities of these markets in order to succeed. In a country classified as emerging market, regions are not alike and some contrasts can be identified. In addition, divergences of marketing variables effect can also be observed in the different retail formats. The retail formats in emerging markets can be segregated in chain self-service and traditional full-service. Thus, understanding the effectiveness of marketing mix not only in country aggregated level data can be an important contribution. Inasmuch as companies aim to generate profits from emerging markets, price is an important marketing variable in the process of creating competitive advantage. Along with price, promotional variables such as in-store displays and price cut are often viewed as temporary incentives to increase short-term sales. Managers defend the usage of promotions as being the most reliable and fastest manner to increase sales and then short-term profits. However, some authors alert about sales promotions disadvantages; mainly in the long-term. This study investigates the effect of price and in-store promotions on sales volume in different regions within an emerging market. The database used is at SKU level for juice, being segregated in the Brazilian northeast and southeast regions and corresponding to the period from January 2011 to January 2013. The methodological approach is descriptive quantitative involving validation tests, application of multivariate and temporal series analysis method. The Vector-Autoregressive (VAR) model was used to perform the analysis. Results suggest similar price sensitivity in the northeast and southeast region and greater in-store promotion sensitivity in the northeast. Price reductions show negative results in the long-term (persistent sales in six months) and in-store promotion, positive results. In-store promotion shows no significant influence on sales in chain self-service stores while price demonstrates no relevant impact on sales in traditional full-service stores. Hence, this study contributes to the business environment for companies wishing to manage price and sales promotions for consumer brands in regions with different features within an emerging market. As a theoretical contribution, this study fills an academic gap providing a dedicated price and sales promotion study to contrast regions in an emerging market.

Mapeamento cromossômico de genes ribossomais em espécies estuarinas da família Gerreidae Identificação de uniformidade cariotípica e sua empregabilidade com fins biotecnológicos - REPROGEN

Perciformes are dominant in the marine environment, characterized as the largest and most diverse fish group. Some families, as Gerreidae, popularly known as silver jennies, carapebas, or mojarras have a high economic potential to marine fish farming, natural explotation and game fishing. Genetic information of these species are of fundamental importance for their management and production. Despite exist over 13,000 marine fish species described, only 2% were cytogenetically analyzed and less than 1% have some reproductive characteristics known. Induced breeding, cytogenetic characterization and cryopreservation of gametes, represent important areas in applied fish studies. In this project cytogenetic analyzes were performed to acess genetic aspects of Gerreidae species, distributed in coastal and estuarine regions of Northeast Brazil. Different methods for identifying chromosomal regions were employed using conventional techniques (Ag-NORs, C-banding), staining with base-specific fluorochromes (DAPI-CMA3), and physical mapping of ribosomal genes 18S and 5S rDNA, through hybridization in situ with fluorescent probes (FISH). The six species analyzed showed remarkable chromosome conservatism. The 18S and 5S ribosomal genes when analyzed in phylogenetic perspective demonstrate varied evolutionary dynamics, suggesting ocurrence of stasis process in some groups and greater dynamism in others. Double FISH with 18S and 5S probes showed both how efficient cytotaxonomic markers in the homogeneous karyotypes of this group of species. The karyotypic pattern identified in addition to the evolutionary aspects of karyotype, are suggestive of existence of low potential of post-zygotic barrier, prompting further research to prospect for artificial interspecific hybridization of these species of commercial importance

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Estudo paramétrico da recuperação de petróleo pesado por aquecimento eletromagnético resistivo

Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding