Multiple ordered phases in Langmuir-Blodgett films of cadmium arachidate at elevated temperatures

Using synchrotron X-ray grazing incidence diffraction, superlattice structures have been observed to develop in Langmuir-Blodgett films of cadmium arachidate as the temperature is raised. The previously reported superstructure in the stacked lamellae at room temperature changes at about 70 degreesC and there are further changes at about 90 and 103 degreesC before the major phase transition from stacked lamellae to hexagonally packed rods occurs at 107 degreesC (Langmuir 1997, 13, 1602). Between 70 and 103 degreesC there is a 1 x 10 one-dimensional in-plane superstructure, which is commensurate with the local structure and has an interlayer shift along [01] by a distance of b (of the local structure) at lower temperatures, and a further shift at about 90 degreesC. At lower (

Dissolution of sucrose crystals in the anhydrous sorbitol melt

The dissolution of a sugar (sucrose as a model) with higher melting point was studied in a molten food polyol (sorbitol as a model) with lower melting point, both in anhydrous state. A DSC and optical examination revealed the dissolution of anhydrous sucrose crystals (mp 192 degreesC) in anhydrous sorbitol (mp 99 degreesC) liquid melt. The sucrose-sorbitol crystal mixtures at the proportions of 10, 30, 60, 100 and 150 g of sucrose per 100 g of sorbitol were heat scanned in a DSC to above melting endotherm of sorbitol but well below the onset temperature of melting of sucrose at three different temperatures 110, 130 and 150 degreesC. The heat scanning modes used were with or without isothermal holding. The dissolution of sucrose in the sorbitol liquid melt was manifested by an increase in the glass transition temperature of the melt and corresponding decrease in endothermic melting enthalpy of sucrose. At given experimental conditions, as high as 25 and 85% of sucrose dissolved in the sorbitol melt during 1 h of isothermal holding at 110 and 150 degreesC, respectively. Optical microscopic observation also clearly showed the reduction in the size of sucrose crystals in sorbitol melt during the isothermal holding at those temperatures. (C) 2003 Elsevier Science Ltd. All rights reserved.

Low temperature induced spikelet sterility in rice. II. Effects of panicle and root temperatures

Low temperatures impose restrictions on rice (Oryza sativa L.) production at high latitudes. This study is related to low temperature damage that can arise mid-season during the panicle development phase. The objective of this study was to determine whether low temperature experienced by the root, panicle, or foliage is responsible for increased spikelet sterility. In temperature-controlled glasshouse experiments, water depth, and water and air temperatures, were changed independently to investigate the effects of low temperature in the root, panicle, and foliage during microspore development on spikelet sterility. The total number of pollen and number of engorged pollen grains per anther, and the number of intercepted and germinated pollen grains per stigma, were measured. Spikelet sterility was then analysed in relation to the total number of pollen grains per spikelet and the efficiency with which these pollen grains became engorged, were intercepted by the stigma, germinated, and were involved in fertilisation. There was a significant combined effect of average minimum panicle and root temperatures on spikelet sterility that accounted for 86% of the variation in spikelet sterility. Total number of pollen grains per anther was reduced by low panicle temperature, but not by low root temperature. Whereas engorgement efficiency ( the percentage of pollen grains that were engorged) was determined by both root and panicle temperature, germination efficiency (the percentage of germinated pollen grains relative to the number of engorged pollen grains intercepted by the stigma) was determined only by root temperature. Interception efficiency (i.e. percentage of engorged pollen grains intercepted by the stigma), however, was not affected by either root or panicle temperature. Engorgement efficiency was the dominant factor explaining the variation in spikelet sterility. It is concluded that both panicle and root temperature affect spikelet sterility in rice when the plant encounters low temperatures during the microspore development stage.

Utilização de ultrassom na conservação de suco de laranja : efeito sobre características físico-químicas, enzimáticas, microbiológicas e sensoriais

O consumo de suco de frutas vem aumentando no Brasil. Entre 2002 e 2009 o consumo de sucos, sejam eles concentrados, em pó, sucos ou néctares, aumentou em 21%. Devido ao seu sabor agradável e doce, e ao seu valor nutricional, o suco de laranja é o suco mais comum fabricado pela indústria de processamento de bebidas. Diversos fatores podem afetar a qualidade do suco de laranja. A microbiota típica presente no suco de laranja pode ser proveniente de várias etapas de sua produção. Em relação às enzimas, a pectinametilesterase (PME) é a principal causadora de alterações em suco laranja. A pasteurização e a esterilização comercial são os métodos de conservação mais comuns utilizados para inativar enzimas e micro-organismos, porém podem causar efeitos adversos em relação às características sensoriais (cor, sabor, aroma, e outros) dos produtos. A tecnologia de ultrassom vem sendo estudada recentemente como uma forma de conservar os alimentos sem causar efeitos indesejáveis como os provocados pelos tratamentos térmicos. O objetivo deste trabalho foi avaliar a utilização da tecnologia de ultrassom e de ultrassom aliado a temperaturas brandas, como forma de conservar suco de laranja. Para isto, foram analisadas a contagem de mesófilos totais e bolores e leveduras, a atividade da pectinametilesterase, o teor de vitamina C, a cor, o pH, o teor de sólidos solúveis e a estabilidade em relação à turbidez. Ainda, avaliou-se a aceitação sensorial de suco de laranja submetido à termossonicação. Os resultados foram comparados com os obtidos para o suco natural e o suco pasteurizado. Utilizou-se um ultrassom de 40 kHz, associado às temperaturas de 25 ºC, 30 ºC, 40 ºC, 50 ºC e 60 ºC durante 10 minutos. Os tratamentos utilizando ultrassom a 50 ºC e 60 ºC foram capazes de reduzir a contagem de bolores e leveduras e de mesófilos totais, apresentando uma redução de 3 ciclos logarítmicos. Resultado similar foi encontrado quando realizado o tratamento térmico a 90 ºC por 30 segundos. Observou-se que a aplicação da termossonicação permitiu uma redução significativa na atividade de PME e uma menor perda de vitamina C. O tratamento que apresentou melhor redução na atividade de PME foi utilizando ultrassom 40 kHz com temperatura de 60 ºC. Em relação ao ácido ascórbico, quanto menor a temperatura utilizada em conjunto com a sonicação, menor foi a perda deste composto. O teor de sólidos solúveis, o pH e a cor do suco não foram alterados ao longo do processamento. Avaliando a aceitabilidade do suco, verificou-se que a cor não foi influenciada por nenhum tratamento. Em relação ao aroma, sabor e aceitação global o suco submetido a termossonicação obteve aceitação sensorial superior à encontrada para o suco pasteurizado. Concluiu-se então que a utilização da termossonicação como uma forma de conservação para suco de laranja é viável.

Cobertura permanente de solo com leguminosas herbáceas perenes no cultivo de bananeiras no médio Vale do Jequitinhonha

A região da Caatinga é caracterizada pelas altas temperaturas durante o ano e má distribuição das chuvas. Em virtude desses fatores de clima regional, tem-se a necessidade de adoção por práticas que elevem à eficiência e sustentabilidade agrícola local. Assim, objetivou-se avaliar a aptidão de leguminosas herbáceas perenes como cobertura permanente de solo no cultivo de bananeira. Foram conduzidos três experimentos, para avaliação das leguminosas, utilizou-se um delineamento experimental em blocos casualizados, com quatro repetições, em esquema de parcelas subdivididas no espaço e para algumas variáveis, sub-subdividida no tempo, sendo: Fator “A” os dois diferentes ambientes de plantio: municípios de Itaobim/MG e Virgem da Lapa/MG; Fator “B”, nas subparcelas, dois manejos de cobertura do solo e para algumas variáveis, três manejos, constituídos pelas leguminosas: cudzu tropical (Pueraria phaseoloides) calopogônio (Calopogonium mucunoides) e solo descoberto (solo capinado); Fator “C” épocas de coleta de dados. Para avaliação das bananeiras, foram dois experimentos em blocos casualizados, com quatro repetições, em esquema de parcelas sudivididas no espaço, sendo: nas parcelas, fator “A” constituído por três manejos de cobertura do solo, pelas leguminosas: cudzu tropical e o calopogônio, e solo descoberto (solo capinado); fator “B”, nas subparcelas, plantas de bananeiras em três idades morfofisiológicas (diferentes ciclos e tamanhos); Para algumas variáveis que foram submetidas a coletas periódicas, utilizou-se o esquema de parcelas subsubdivididas no tempo, acrescentando-se o fator “C”, datas das coletas nas sub-subparcelas, tendo como referência os dias após semeadura (DAS) das leguminosas. Foram avaliadas as seguintes variáveis: taxa de cobertura do solo; potencial de deposição de folhas e a ciclagem de nutrientes; capacidade de inibição da vegetação espontânea; conservação da temperatura e promoção da retenção de umidade do solo. Também foi avaliado o crescimento vegetativo e produtividade das bananeiras. Como resultados principais, notou-se que as leguminosas proporcionaram eficiente cobertura do solo, o calopogônio apresentou o maior acúmulo de N, P, K, e Ca, via deposição de material senescente, tal como maior inibição das plantas espontâneas nos pomares de bananeiras. Essa cobertura também promoveu uma eficiente redução da temperatura do solo, possibilitando menor variação térmica nas camadas de maior concentração radicular da bananeira, e consequentemente, obtendo maior acúmulo de umidade no solo. As bananeiras cultivadas sobre coberturas vivas de solo apresentaram aumento gradativo no crescimento e peso de cacho. Os resultados reforçam o potencial uso dessas espécies na fruticultura, principalmente em regiões de severas restrições hídricas, como forma de adubação e otimização de diversos processos biológicos em seu ambiente de cultivo.

Elaboração e análise de extrato hidrossolúvel de gergelim (Sesamum indicum)

O objetivo do presente estudo foi elaborar e caracterizar um extrato hidrossolúvel à base de gergelim para ser usado como possível substituto do leite de vaca e extrato de soja. Foi proposto um modelo de cinética de absorção de água durante a etapa de maceração no qual estimou o tempo ideal de batimento do gergelim macerado e se essa etapa influencia no rendimento do produto. Posteriormente com o objetivo de saber a influência do tempo de batimento (0,45 min a 14,55 min) e a concentração do extrato (1,925% a 23,07%) foram avaliadas através de um delineamento composto central rotacional (DCCR), ou seja, um delineamento 22 incluindo 4 ensaios nas condições axiais e 5 repetições no ponto central, totalizando 13 experimentos. Para todos os ensaios do delineamento realizou-se análises de viscosidade, cor, sólidos solúveis totais e rendimento. As mesmas análises foram realizadas em amostras comerciais de leite de vaca e extrato hidrossolúvel de soja com o intuito de comparação. Após a realização dessa etapa foi possível à seleção de algumas amostras para elaboração do extrato hidrossolúvel de gergelim e então realizou-se análises físico-químicas (proteína, cinzas, lipídios, carboidratos) e determinou-se a capacidade antioxidante por ABTS e teor de compostos fenólicos de tais amostras. Quanto à análise de rendimento não houve diferença significativa da quantidade de extrato obtido em diferentes temperaturas de maceração pelo teste de Tukey (p> 0,05). O DCCR foi realizado no programa Statistica e selecionaram-se os ensaios 1, 2, 6, 7, PC (ponto central) que foram as amostras que mais se assemelharam com as amostras comerciais estudadas. Nessas amostras realizou-se as análises físico-químicas além de capacidade antioxidante e compostos fenólicos. O conteúdo de sólidos totais na amostra 6 foi superior as demais amostras, diferindo estatisticamente das demais amostras (p> 0,05). Já para o teor de lipídios, cinzas e proteínas encontrados nas amostras 6 e PC foram maiores que as demais amostras, enquanto a amostra 7 exibiu o menor teor de lipídios e proteínas, considerando que o teor de cinzas das amostras 1, 2 e 7 foram estatisticamente iguais. O teor de carboidratos calculado por diferença foi superior nas amostras 1, 2 e 7 e com o menor valor na amostra 6. Os valores de capacidade antioxidante e compostos fenólicos não se diferenciaram estatisticamente entre si ao nível de 5% de probabilidade. Concluiu-se portanto que a etapa de maceração não influenciou no rendimento do produto final. A partir das análises físico-químicas pode-se concluir que o extrato hidrossolúvel de gergelim em determinadas amostras apresentou um melhor desempenho quanto ao valor nutricional comparado ao extrato de soja.

Effect of the Impact Conditions on the Mechanical Properties of Injection-Molded Parts

This work focused on the study of the impact event on molded parts in the framework of automotive components. The influence of the impact conditions and processing parameters on the mechanical behavior of talc-filled polypropylene specimens was analyzed. The specimens were lateral-gate discs produced by injection molding, and the mechanical characterization was performed through instrumented falling weight impact tests concomitantly assisted with high-speed videography. Results analyzed using the analysis of variance (ANOVA) method have shown that from the considered parameters, only the dart diameter and test temperature have significant influence on the falling weight impact properties. Higher dart diameter leads to higher peak force and peak energy results. Conversely, higher levels of test temperatures lead to lower values of peak force and peak energy. By means of high-speed videography, a more brittle fracture was observed for experiments with higher levels of test velocity and dart diameter and lower levels of test temperature. The injection-molding process conditions assessed in this study have an influence on the impact response of moldings, mainly on the deformation capabilities of the moldings.

Higher-order lazy functional slicing

Program slicing is a well known family of techniques intended to identify and isolate code fragments which depend on, or are depended upon, specific program entities. This is particularly useful in the areas of reverse engineering, program understanding, testing and software maintenance. Most slicing methods, and corresponding tools, target either the imperative or the object oriented paradigms, where program slices are computed with respect to a variable or a program statement. Taking a complementary point of view, this paper focuses on the slicing of higher-order functional programs under a lazy evaluation strategy. A prototype of a Haskell slicer, built as proof-of-concept for these ideas, is also introduced

Shape and size of jatropha beans (Jatropha curcas L.) during drying at different temperatures

This study was carried out to study the physical properties of the jatropha beans over the drying under six air conditions, based on measurements of roundness, sphericity, volume, superficial area, projected area and surface/volume ratio. Jatropha beans with moisture content around 0.61 (decimal d.b.) were subjected to thin-layer drying in oven with forced-air circulation under six temperature conditions (36, 45, 60, 75, 90 and 105 °C) and relative humidity of 31.7; 19.6; 9.4; 4.8; 2.6 and 1.5% respectively, until reaching the moisture content of 0.11 ± 0.006 (decimal d. b.). The results showed that the necessary time for jatropha beans to reach the moisture content of 0.11 ± 0.006 (decimal d.b.) were 1.5; 2.25; 3.0; 4.75; 6.75 and 12.0 h for the drying temperatures of 105, 90, 75, 60, 45 and 36 °C, respectively; and the reduction in the moisture content as well as the drying conditions promoted changes in the shape and reduced the size of the jatropha beans.

Cold storage of peaches cv. Aurora grown in the Zona da Mata Mineira, Minas Gerais State, Brazil

This study aimed to evaluate the postharvest behavior of peach cv. Aurora 1 harvested in the Zona da Mata region of Minas Gerais in two ripening stages and kept under different storage temperatures. Fruits on mid-ripe and fully ripe stages were stored at three temperatures: 5.6 ± 1.57 °C and 72.8 ± 3.8% RH; 10.4 ± 0.5 °C and 95.8 ± 5.5% RH; 21.04 ± 1.63 °C and 96.9 ± 2.6% RH up to 28 storage days (SD) . During storage, fruits stored at 21.04 ± 1.63 °C were evaluated every two days until 8 SD, and every four days for fruits stored at other temperatures. The harvest day was assigned as day zero. The variables evaluated were CO2 production, color of the pericarp and pulp, fresh mass loss, flesh firmness, total soluble solids, titratable acidity, contents of ascorbic acid and carotenoids. The fresh mass loss increased during storage, peaking at 5.6 °C. The reduction in ascorbic acid content was higher in fully ripe fruits at all temperatures. Mid-ripe fruits reached the end of the storage period with better quality. The temperature of 10.4 °C was the most efficient in keeping postharvest quality of peach cv. Aurora 1 harvested in the Zona da Mata region.

The undergraduate level (1st study cycle) as a fundamental platform/standard for the development of Urban and Regional Planning in higher education programs

LUDA is a research project of Key Action 4 "City of Tomorrow & Cultural Heritage" of the programme "Energy, Environment and Sustainable Development" within the Fifth Framework Programme of the European Commission

Higher education of tourism in Spain and its adaptation to the European higher education area

The international tourism system has deeply undergone structural changes in the last decades which not remain outside the subsystem higher education in tourism, especially in the European case. This article has two objectives: firstly, describes the European higher education area and the objectives, skills and subjects taught in the main Spanish universities that offer higher education in tourism. On the other hand, in the light of knowledge that researchers' descriptive models, provide experience of the implementation of European credit and thorough a deeply review of the literature on the topic higher education in tourism, to propose strategies that will enable other tourism higher education systems approach to the European reality. These policy proposals are aimed at agents and elements from higher education in tourism subsystem and they specifically include: the institutions providing education in tourism, the curriculum, the teaching methods, teachers and students.

What factors of satisfaction and motivation are affecting the development of the academic career in Portuguese higher education institutions?

An important constituent group and a key resource of higher education institutions (HEIs) is the faculty or academic staff. The centrality of the faculty role makes it a primary sculptor of institutional culture and has implications for the quality of the institution and therefore has a major role in achieving the objectives of the institution. Demand for academic staff in higher education has been increasing and may be expected to continue to increase. Moreover the performance of academic staff as teachers and researchers determines much of the student satisfaction and has an impact on student learning. There are many factors that serve to undermine the commitment of academics to their institutions and careers. Job satisfaction is important in revitalizing staff motivation and in keeping their enthusiasm alive. Well motivated academic staff can, with appropriate support, build a national and international reputation for themselves and the institution in the professional areas, in research and in publishing. This paper aims to identify the issues and their impacts on academic staff job satisfaction and motivation within Portuguese higher education institutions reporting an ongoing study financed by the European Union through the Portuguese Foundation for Science and Technology.

Variation of magnetic properties in sedimentary rocks hosting the Foum Zguid dyke (southern Morocco): Combined effects of re-crystallization and Fe-metasomatism

The effects of dyke intrusion on the magnetic properties of host sedimentary rocks are still poorly understood. Therefore, we have evaluated bulk magnetic parameters of standard palaeomagnetic samples collected along several sections across the sediments hosting the Foum Zguid dyke in southern Morocco. The study has been completed with the evaluation of the magnetic fabric after laboratory application of sequential heating experiments. The present study shows that: (1) close to Fourn Zguid dykes, the variations of the bulk magnetic parameters and of the magnetic fabric is strongly related with re-crystallization and Fe-metasomatism intensity. (2) The thermal experiments on AMS of samples collected farther from the dyke and, thus, less affected by heating during dyke emplacement, indicate that 300-400 degrees C is the minimum experimental temperature necessary to trigger appreciable transformations of the pre-existing magnetic fabrics. For temperatures higher than ca. 580 degrees C, the magnetic fabric transformations are fully realized, with complete transposition of the initial fabric to a fabric similar to that of samples collected close to the dyke. Therefore, measured variations of the magnetic fabric can be used to evaluate re-crystallization temperatures experienced by the host sedimentary rock during dyke emplacement. The distinct magnetic behaviour observed along the cross-sections strongly suggests that samples collected farther from the dyke margins did not experience thermal episodes with temperatures higher than 300 degrees C after dyke emplacement. (3) AMS data shows a gradual variation of the magnetic fabric with distance from the dyke margin, from sub-horizontal K-3 away from the dyke to vertical K3 close to the dyke. Experimental heating shows that heat alone can be responsible for this strong variation. Therefore, such orientation changes should not be unequivocally interpreted as the result of a stress field (resulting from the emplacement of the dyke, for instance). (4) Magnetic studies prove to be a very sensitive tool to assess rock magnetic transformations, thermally and chemically induced by dyke intrusion in hosting sediments.