Modeling crash types: New insights into the effects of covariates on crashes at rural intersections

Many studies focused on the development of crash prediction models have resulted in aggregate crash prediction models to quantify the safety effects of geometric, traffic, and environmental factors on the expected number of total, fatal, injury, and/or property damage crashes at specific locations. Crash prediction models focused on predicting different crash types, however, have rarely been developed. Crash type models are useful for at least three reasons. The first is motivated by the need to identify sites that are high risk with respect to specific crash types but that may not be revealed through crash totals. Second, countermeasures are likely to affect only a subset of all crashes—usually called target crashes—and so examination of crash types will lead to improved ability to identify effective countermeasures. Finally, there is a priori reason to believe that different crash types (e.g., rear-end, angle, etc.) are associated with road geometry, the environment, and traffic variables in different ways and as a result justify the estimation of individual predictive models. The objectives of this paper are to (1) demonstrate that different crash types are associated to predictor variables in different ways (as theorized) and (2) show that estimation of crash type models may lead to greater insights regarding crash occurrence and countermeasure effectiveness. This paper first describes the estimation results of crash prediction models for angle, head-on, rear-end, sideswipe (same direction and opposite direction), and pedestrian-involved crash types. Serving as a basis for comparison, a crash prediction model is estimated for total crashes. Based on 837 motor vehicle crashes collected on two-lane rural intersections in the state of Georgia, six prediction models are estimated resulting in two Poisson (P) models and four NB (NB) models. The analysis reveals that factors such as the annual average daily traffic, the presence of turning lanes, and the number of driveways have a positive association with each type of crash, whereas median widths and the presence of lighting are negatively associated. For the best fitting models covariates are related to crash types in different ways, suggesting that crash types are associated with different precrash conditions and that modeling total crash frequency may not be helpful for identifying specific countermeasures.

Do walking and leisure-time physical activity protect against arthritis in older women?

Objective: To examine the prospective dose–response relationships between both leisure-time physical activity (LTPA) and walking with self-reported arthritis in older women. Design, setting and participants: Data came from women aged 73–78 years who completed mailed surveys in 1999, 2002 and 2005 for the Australian Longitudinal Study on Women’s Health. Women reported their weekly minutes of walking and moderate to vigorous physical activities. They also reported on whether they had been diagnosed with, or treated for, arthritis since the previous survey. General estimating equation analyses were performed to examine the longitudinal relationship between LTPA and arthritis and, for women who reported walking as their only physical activity, the longitudinal relationship between walking and arthritis. Women who reported arthritis or a limited ability to walk in 1999 were excluded, resulting in data from 3613 women eligible for inclusion in these analyses. Main results: ORs for self-reported arthritis were lowest for women who reported “moderate” levels of LTPA (OR 0.78; 95% CI 0.67 to 0.92), equivalent to 75 to <150 minutes of moderate-intensity LTPA per week. Slightly higher odds ratios were found for women who reported “high” (OR 0.81; 95% CI 0.69 to 0.95) or “very high” (OR 0.84; 95% CI 0.72 to 0.98) LTPA levels, indicating no further benefit from increased activity. For women whose only activity was walking, an inverse dose–response relationship between walking and arthritis was seen. Conclusions: The results support an inverse association between both LTPA and walking with self-reported arthritis over 6 years in older women who are able to walk.

Secure tracking for critical applications : communications, GPS and future Galileo services

Tracking/remote monitoring systems using GNSS are a proven method to enhance the safety and security of personnel and vehicles carrying precious or hazardous cargo. While GNSS tracking appears to mitigate some of these threats, if not adequately secured, it can be a double-edged sword allowing adversaries to obtain sensitive shipment and vehicle position data to better coordinate their attacks, and to provide a false sense of security to monitoring centers. Tracking systems must be designed with the ability to perform route-compliance and thwart attacks ranging from low-level attacks such as the cutting of antenna cables to medium and high-level attacks involving radio jamming and signal / data-level simulation, especially where the goods transported have a potentially high value to terrorists. This paper discusses the use of GNSS in critical tracking applications, addressing the mitigation of GNSS security issues, augmentation systems and communication systems in order to provide highly robust and survivable tracking systems.

Predicting dry eye using non-invasive techniques of tear film surface assessment

PURPOSE. To measure tear film surface quality in healthy and dry eye subjects using three noninvasive techniques of tear film quality assessment and to establish the ability of these noninvasive techniques to predict dry eye. METHODS. Thirty four subjects participated in the study, and were classified as dry eye or normal, based on standard clinical assessments. Three non-invasive techniques were applied for measurement of tear film surface quality: dynamic-area high-speed videokeratoscopy (HSV), wavefront sensing (DWS) and lateral shearing interferometry (LSI). The measurements were performed in both natural blinking conditions (NBC) and in suppressed blinking conditions (SBC). RESULTS. In order to investigate the capability of each method to discriminate dry eye subjects from normal subjects, the receiver operating curve (ROC) was calculated and then the area under the curve (AUC) was extracted. The best result was obtained for the LSI technique (AUC=0.80 in SBC and AUC=0.73 in NBC), which was followed by HSV (AUC=0.72 in SBC and AUC=0.71 in NBC). The best result for DWS was AUC=0.64 obtained for changes in vertical coma in suppressed blinking conditions, while for normal blinking conditions the results were poorer. CONCLUSIONS. Non-invasive techniques of tear film surface assessment can be used for predicting dry eye and this can be achieved in natural blinking as well as suppressed blinking conditions. In this study, LSI showed the best detection performance, closely followed by the dynamic-area HSV. The wavefront sensing technique was less powerful, particularly in natural blinking conditions.

Lateral shearing interferometry, dynamic wavefront sensing, and high-speed videokeratoscopy for noninvasive assessment of tear film surface characteristics : a comparitive study

There are several noninvasive techniques for assessing the kinetics of tear film, but no comparative studies have been conducted to evaluate their efficacies. Our aim is to test and compare techniques based on high-speed videokeratoscopy (HSV), dynamic wavefront sensing (DWS), and lateral shearing interferometry (LSI). Algorithms are developed to estimate the tear film build-up time TBLD, and the average tear film surface quality in the stable phase of the interblink interval TFSQAv. Moderate but significant correlations are found between TBLD measured with LSI and DWS based on vertical coma (Pearson's r2=0.34, p<0.01) and higher order rms (r2=0.31, p<0.01), as well as between TFSQAv measured with LSI and HSV (r2=0.35, p<0.01), and between LSI and DWS based on the rms fit error (r2=0.40, p<0.01). No significant correlation is found between HSV and DWS. All three techniques estimate tear film build-up time to be below 2.5 sec, and they achieve a remarkably close median value of 0.7 sec. HSV appears to be the most precise method for measuring tear film surface quality. LSI appears to be the most sensitive method for analyzing tear film build-up.

'I am smart and I am not joking': Aiming high in the middle years of schooling

In this paper, we draw on accounts from students to inform a Middle Schooling movement that has been variously described as "arrested", "unfinished" and "exhausted". We propose that if the Middle Schooling movement is to understand the changing worlds of students and develop new approaches in the middle years of schooling, then it is important to draw on the insights that individual students can provide by conducting research with "students-as-informants". The early adolescent informants to this paper report high hopes for their futures (despite their lower socio-economic surroundings), which reinforces the importance of supporting successful learner identities and highlights the role of schooling in the decline of adolescent student aspirations. However, their insights did not stop at the individual learner, with students also identifying cultural and structural constraints to reform. As such, we argue that students may be both an important resource for inquiry into individual school reform and for the Middle Schooling movement internationally.

Wavelet based approaches and high resolution methods for complex process models

Many industrial processes and systems can be modelled mathematically by a set of Partial Differential Equations (PDEs). Finding a solution to such a PDF model is essential for system design, simulation, and process control purpose. However, major difficulties appear when solving PDEs with singularity. Traditional numerical methods, such as finite difference, finite element, and polynomial based orthogonal collocation, not only have limitations to fully capture the process dynamics but also demand enormous computation power due to the large number of elements or mesh points for accommodation of sharp variations. To tackle this challenging problem, wavelet based approaches and high resolution methods have been recently developed with successful applications to a fixedbed adsorption column model. Our investigation has shown that recent advances in wavelet based approaches and high resolution methods have the potential to be adopted for solving more complicated dynamic system models. This chapter will highlight the successful applications of these new methods in solving complex models of simulated-moving-bed (SMB) chromatographic processes. A SMB process is a distributed parameter system and can be mathematically described by a set of partial/ordinary differential equations and algebraic equations. These equations are highly coupled; experience wave propagations with steep front, and require significant numerical effort to solve. To demonstrate the numerical computing power of the wavelet based approaches and high resolution methods, a single column chromatographic process modelled by a Transport-Dispersive-Equilibrium linear model is investigated first. Numerical solutions from the upwind-1 finite difference, wavelet-collocation, and high resolution methods are evaluated by quantitative comparisons with the analytical solution for a range of Peclet numbers. After that, the advantages of the wavelet based approaches and high resolution methods are further demonstrated through applications to a dynamic SMB model for an enantiomers separation process. This research has revealed that for a PDE system with a low Peclet number, all existing numerical methods work well, but the upwind finite difference method consumes the most time for the same degree of accuracy of the numerical solution. The high resolution method provides an accurate numerical solution for a PDE system with a medium Peclet number. The wavelet collocation method is capable of catching up steep changes in the solution, and thus can be used for solving PDE models with high singularity. For the complex SMB system models under consideration, both the wavelet based approaches and high resolution methods are good candidates in terms of computation demand and prediction accuracy on the steep front. The high resolution methods have shown better stability in achieving steady state in the specific case studied in this Chapter.

Critical analysis of high particle number emissions from accelerating compressed natural gas buses

Compressed natural gas (CNG) engines are thought to be less harmful to the environment than conventional diesel engines, especially in terms of particle emissions. Although, this is true with respect to particulate matter (PM) emissions, results of particle number (PN) emission comparisons have been inconclusive. In this study, results of on-road and dynamometer studies of buses were used to derive several important conclusions. We show that, although PN emissions from CNG buses are significantly lower than from diesel buses at low engine power, they become comparable at high power. For diesel buses, PN emissions are not significantly different between acceleration and operation at steady maximum power. However, the corresponding PN emissions from CNG buses when accelerating are an order of magnitude greater than when operating at steady maximum power. During acceleration under heavy load, PN emissions from CNG buses are an order of magnitude higher than from diesel buses. The particles emitted from CNG buses are too small to contribute to PM10 emissions or contribute to a reduction of visibility, and may consist of semivolatile nanoparticles.

Strengthening of circular hollow steel tubular sections using high modulus CFRP sheets

This paper describes the behaviour of very high strength (VHS) circular steel tubes strengthened by carbon fibre reinforced polymer (CFRP) and subjected to axial tension. A series of tests were conducted with different bond lengths and number of layers. The distribution of strain through the thickness of CFRP layers and along CFRP bond length was studied. The strain was found to generally decrease along the CFRP bond length far from the joint. The strain through the thickness of the CFRP layers was also found to decrease from bottom to top layer. The effective bond length for high modulus CFRP was established. Finally empirical models were developed to estimate the maximum load for a given CFRP arrangement.

Evaluation on service quality of railway timetable

From the business viewpoint, the railway timetable is a list of the products presented by the railway transportation operators to the customers, specifying the schedules of all the train services on a railway line or network. In order to evaluate the quality of the train service schedules, a number of indices are proposed in this paper. These indices primarily take the passengers’ needs, such as waiting time, transfer time and transport capacity into consideration. Delay rate is usually used in post-evaluation. In this study, we propose to give an evaluation on the probability that the scheduled train services are likely to be delayed and the recovery ability of the timetable after delay has occurred. The evaluation identifies the possible problems in the services, such as excessive waiting time, non-seamless transfer, and high possibility of delay. This paper also discusses the improvement of these problems through certain adjustments on the timetable. The indices for evaluation and the adjustment method on timetable are then applied to a case study on the Hu-Ning-Hang railway in China, followed by the discussions of the merits of the proposed indices for timetable evaluation and possible improvement.

Centrally supported online surveys for research at QUT

We describe the introduction, service growth, benefits and holistic support approach of a centrally supported universitywide online survey tool for researchers at QUT. The online survey service employs the Key Survey software, and has grown into a significant service for QUT researchers since being introduced in 2009. Key benefits of the approach include the ability of QUT to handle important issues relating to data such as security, privacy, integrity, archiving & disposal. The service also incorporates a workflow process that enhances the institution’s ability to ensure survey quality control through controlled approval and pilot testing before any survey is widely released. An important issue is that a tool like this can make it very easy to do very poor research very quickly while creating lots of data, due to the absence of a rigorous methodology designed to reduce errors and collect accurate, comprehensive, timely data. With this in mind, a holistic approach to service provision and support has been taken, which has included the introduction of an integrated system of seminars, tools and workshops to get researchers thinking about the quality of their research while becoming operational quickly. The system of seminars, workshops, checks and approvals we have put in place at QUT is designed to ensure better quality outcomes for QUT’s research and the individual researchers concerned.

Accountability through high-stakes testing and curriculum change

The motivation for secondary school principals in Queensland, Australia, to investigate curriculum change coincided with the commencement in 2005 of the state government’s publication of school exit test results as a measure of accountability. Aligning the schools’ curriculum with the requirements of high-stakes testing is considered by many academics and teachers as negative outcome of accountability for reasons such as ‘teaching to the test’ and narrowing the curriculum. However, this article outlines empirical evidence that principals are instigating curriculum change to improve published high-stakes test results. Three principals in this study offered several reasons as to why they wished to implement changes to school curricula. One reason articulated by all three was the pressures of accountability, particularly through the publication of high-stakes test data which has now become commonplace in education systems of many Western Nations.

Use of lifts and refuge floors for fire evacuation in high rise apartment buildings

If current population and accommodation trends continue, Australian cities will, in the future, have noticeable numbers of apartment buildings over 60 storeys high. With an aging population it follows that a significant proportion of those occupying these buildings will be senior citizens, many of whom will have some form of disability. For these occupants a fire emergency in a high rise building presents a serious problem. Currently lifts cannot be used for evacuation and going down 60 storeys in a fire isolated staircase would be physically impossible for many. Therefore, for many, the temptation to remain in one’s unit will be very strong. With an awareness of this behaviour trend in older residents, many researchers have, in recent years, explored the possible wider use of lifts in a fire emergency. So far the use of lifts for evacuation has been approved for a small number of buildings but wide acceptance of this solution is still to be achieved. This paper concludes that even in high-rise apartment buildings where lifts are approved for evacuation, architects should design the building with alternative evacuation routes and provide suitable safe refuge areas for those who cannot use the stairs when the lifts are unavailable.

Reverse immigration

This book (256 pages, written in Korean) is a critical essay that reviews, questions, and criticises Korean and Eastern immigrants’ thinking and behaviour styles in Australia from their cultural perspectives, and discuss and proposes a creative cultural dimension for their better life in a multicultural context. Multiculturalism is not supportive of Eastern cultures because of individualistic collection of cultures, while transculturalism facilitates nurture of their culture in a community-oriented way within multicultural circumstances. Korean and Eastern immigrants, sharing oriental cultural systems and values, should approach to the Australian multicultural context with transculturalism which allows creating new cultural values in collaboration with and by participation into local communities. ------------------------------------------------------------ Many Eastern immigrants live in their own ethnic communities without or less interacting with Australian (communities). The author defines this phenomenon as “reverse immigration”. Reverse immigration refers to re-immigrating to their ethnic community in Australia or to their birth country despite they did not anticipate that this would happen to them before immigration to Australia. The author argues that Easterners’ collectivistic culture often devalues individuality and vice versa. Cultural clash between West and East often forces the immigrants to choose reverse immigration because of their lack of understanding of Western culture and their cultural characteristics such as low individuality, high power distance, and high uncertainty avoidance. For example, a vague boundary between individualist and collectivist in a collectivistic context (within their ethnic group) often leads to maladjustment to local communities and enhancement of cultural conservatism. The author proposes that the cultural clash can be overcome by cross-cultural activities named “transculturalism”. To Eastern immigrants, transculturalism can be achieved by acculturation of their two predominant cultures, the third-person perspective and generalised others. In a multicultural context, the former refers to the ability to share another person's feelings and emotions as if they were your own, and the latter does the ability to manage community and public expectations. When both cultural values are used for quality interactions between East and West, they allow Eastern immigrants to be more creative and critical and Australian to be more socially inclusive and culturally tolerant. With these discussions, the author discusses cultural differences throughout the book with four topics (chapters) and proposes transculturalism as a solution to the reverse immigration. ------------------------------------------------------------ Chapter 1 criticises Koreans’ attitudes and methods towards learning English that is less pragmatic and practical, but more likely to be a scholarly study. The author explains that Koreans’ non-pragmatic towards learning English has been firmly built based on their traditional systems and values that Koreans view English as a discipline and an aim of academic achievements rather than a means of communication. Within their cultural context, English can be perceived as more than a language, but something like vastly superior to their language and culture. Their collectivistic culture regards English as an unreachable and heterogeneous one that may threaten their cultural identity, so that “scholarly studying” is only the way to achieve (not learn) it. This discourages the immigrants to engage and involve in daily dialogues by “using” English as a second language. The author further advises the readers to be aware of Eastern collectivistic culture in communication and interaction that sometimes completely reverses private and public topics in a Western context. This leads them to feel that they have no content to talk to natives. ------------------------------------------------------------ Chapter 2 compares between Korea and Australia in terms of their educational systems and values, and proposes how Eastern overseas students can achieve critical and creative thinking within a Western educational setting. Interestingly, this chapter includes an explanation of why Eastern overseas students easily fail assessments including essay writing, oral presentations and discussions. One of the reasons the author explains is that Eastern students are not familiar to criticise others and think creatively, especially when they recognise that their words and ideas may harm the collectivistic harmony. Western educational systems focuses on enhancement of individuality such as self-confidence, self-esteem, and self-expression, while Eastern educational systems foster group-oriented values such as interpersonal relationship, and strong moral and spiritual values. Yet, the author argues that the collectivistic approach to criticism and creativity is often more critical and creative than Western individuals when they know what they are supposed to do for a group (or a community). Therefore, Eastern students need to think their cultural merits and demerits by using an individual perspective rather than generalised others’ perspective. The latter often discourages individual participation in a community, and the generalised others in a Western culture is weaker than Eastern. Furthermore, Western educational systems do not educate students to transform (loose) their individuality to fit into a group or a community. Rather they cultivate individuality for community prosperity. ------------------------------------------------------------ Chapter 3 introduces various cases of reverse immigration in workplaces that many immigrants return to their country or their ethnic community after many trials for acculturation. Reverse immigration is unexpected and not planned before immigration, so that its emotional embarrassment increases such severe social loneliness. Most Eastern immigrant workers have tried to adjust themselves in this new cultural environment at the early stages of immigration. However, their cultural features of collectivism, high power distance, high uncertainty avoidance, and long-term oriented cultures suppress individual initiative and eliminate the space for experiments in ways of acculturation. The author argues that returning to their ethnic community (physically and psychologically) leads to two significant problems: their distorted parenting and becoming more conservatives. The former leads the first generation of immigrants to pressure their children to pursue extrinsic or materialist values, such as financial success, fame and physical appearance, rather than on intrinsic values, while the latter refers to their isolated conservative characters because of their remoteness from the changes of their own country. The author also warns that their ethnic and religious groups actively strengthens immigrants’ social loneliness and systematically discourages immigrants’ interests and desire to be involving into local communities. The ethnic communities and leaders have not been interacting with Australian local communities and, as a result, are eager to conserve outdated cultural systems values. Even they have a tendency to weed out those people who wish to settle down within Australian local communities. They believe that those people can threaten their community’s survival and continuity. ------------------------------------------------------------ Chapter 4 titled multiculturalism argues that Korean and Eastern immigrants should more precisely understand Australia as a multicultural society in a way of collaboratively creating new cultural values. The author introduces multiculturalism with its definitions and history in Australia and argues the limitations of multiculturalism from an Easterner’s perspective. With well known tragedies of the second generations of U.S. immigrants, Cho Seung-Hui, a university student, massacred 32 people on the Virginia Tech before committing suicide and Hidal Hassan, an Army psychiatrist, killed 13 people at Fort Hood and the responses of ethnic community, the author explains that their mental illness may be derived from their parents’ (or ethnic group) culturally isolated attitude and socially static viewpoint of U.S. (Western system and values). The author insists that multiculturalism may restrict Eastern immigrants’ engagement and involvement in local communities. Multiculturalism has been systematically and historically developed based on Western systems and cultural values. In other words, multiculturalism requires high self-confidence and self-esteem that Eastern immigrants less prioritise them. It has been generally known that Easterners put more weight on human relationship than Westerners, but the author claims that this is not true. Within an individualistic culture, Westerners are more interested in building person-to-person connections and relationships. While Easterners are more interested in how individuals can achieve a sense of belonging within a group and a community. Therefore, multiculturalism is an ideology which forces Eastern immigrants to discard their strong desire to be part of a group and does not give a sense of belonging. In a consequence, the author advises that Eastern immigrants should aim towards “transculturalism” which allows them to actively participate in and contribute to their multicultural community. Transculturalism does not ask Easterners to discard their cultural values, but enables them to be a collectivistic individualist (a community leader) who is capable of developing new cultural values in a more creative and productive way. Furthermore, transculturalism encourages Western Australians in a multicultural context to collaborate with ethnic minorities to build a better community.

The role of bricolage and resource constraints in high potential sustainability ventures

Sustainability decisions and their impacts may be among the greatest challenges facing the world in the 21st century (Davos 2000). Apart from adaptation on the part of established organizations these challenges are arguably going to require solutions developed by new actors However, young ventures have only recently begun generating research interest within sustainability literature (Shepherd et al. 2009). In particular, little is known about resource behaviours of these ventures and how they adapt to substantial resource constraints. One promising theory that has been identified as a way that some entrepreneurs manage constraints is bricolage: a construct defined as “making do by applying combinations of the resources at hand to new problems and opportunities” (Baker and Nelson 2005: 333). Bricolage may be critical as the means of continued venture success as these ventures are frequently developed in severe resource constraint, owing to higher levels of technical sophistication (Rothaermel and Deeds 2006). Further, they are often developed by entrepreneurs committed to personal and social goals of resourcefulness, including values that focus on conservation rather than consumption of resources (Shepherd et al. 2009). In this paper, using seven novel cases of high potential sustainability firms from CAUSEE we consider how constraints impact resource behaviours and further illustrate and extend bricolage domains previously developed by Baker and Nelson (2005) with recommendations for theory and practice provided.