Diurnal effects on spearmint oil yields and composition

'Native'spearmint (Mentha spicata L.) is one of the two spearmint species grown commercially in the United States and other countries for essential oil production. The two major constituents of spearmint oil are carvone and limonene. It is not known if the essential oil yield (content) and composition of spearmint oil are affected by diurnal variation, and when it would be the best time for harvesting flowering spearmints within a 24h period. Therefore, the objective of this study was to evaluate the effect of diurnal variation on yield and composition of spearmint 'Native'essential oil for the environmental conditions of Northern Wyoming, at elevation 1170 m above the sea level. The experiment was conducted on a 3-year old well established spearmint plantation. The harvest times were every 2 h within a 24-h period: 7:00 AM, 9:00 AM, 11:00AM, 1:00 PM, 3:00 PM, 5:00 PM, 7:00 PM, 9:00 PM, 11:00 PM, 1:00 AM, 3:00 AM, and 5:00 AM. Essential oil yield varied from 0.96 to 1.47 g of oil per 100 g of dry herbage; the maximum oil yield was obtained at 9:00 AM and the minimum at 7:00 PM. The concentration of carvone in the oil varied from 44.1% (at 1:00 PM) to 66.4% (at 9:00 PM) of the total oil. However, the yield of carvone (a function of oil yield and carvone concentration in the oil) was the highest at 3:00 AM and the lowest at 1:00 PM. The concentration of limonene (10.7-15.8% of the oil) was the highest at 7:00 PM and the lowest at 1:00 PM, whereas the yield of limonene was the highest at 9:00 PM. For best essential oil yields, flowering spearmint should be harvested at around 9:00 AM. However, to obtain oil with high carvone concentration, spearmint should be harvested at 9:00 PM. Harvests at 1:00 PM would result in spearmint oil with low concentrations of both carvone and limonene, and hence, should be avoided. (C) 2014 Elsevier B.V. All rights reserved.

Glycaspis brimblecombei Moore, 1964 (Hemiptera: Psyllidae) on eucalyptus: oviposition non-preference and antibiosis

Forest plantations with Eucalyptus spp. (L'H,r) in Brazil are highly yielding. However, this activity is more and more threatened due to interactions with phytophagous insects, especially by exotic species, such as the red gum lerp psyllid Glycaspis brimblecombei Moore (Hemiptera: Psyllidae). This study aimed to evaluate the resistance in eucalyptus against the psyllid in oviposition and biological development assays, attempting to identify potential genotypes resistant to the pest for forest plantations. In addition, we tested the hypothesis of that concentration of total phenolics and lignin, and amount of epicuticular wax were associated with the expression of resistance. Results showed that there was variation in the levels of resistance among the genotypes assessed. Oviposition non-preference was observed on Eucalyptus citriodora (Hook) in free-choice and no-choice tests, and Clone FP10 was least preferred in the no-choice test. The genotypes E. citriodora and Clone FP6 provided 100 % nymphal mortality, and Clones FP7 and FP9 also affected negatively the G. brimblecombei development by lengthening the duration of the nymphal stage and reducing adult emergence. Clone FP6 had higher concentration of total phenolics and larger contact angle formed between the water droplet and leaf surface, which may be associated with thicker layer of epicuticular wax on the leaves, and one of the causes of high nymphal mortality. Thus, the use of the resistant genotypes of eucalyptus screened against G. brimblecombei is a promising and viable alternative for forest plantations infested with this pest.

Functional and phylogenetic diversity of scattered trees in an agricultural landscape: Implications for conservation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phytoseiidae (Acari: Mesostigmata) from rubber tree crops in the State of Bahia, Brazil, with description of two new species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biological control of Glycaspis brimblecombei (Hemiptera: Aphalaridae) in eucalyptus plantations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of surface application of calcium-magnesium silicate and gypsum on soil fertility and sugarcane yield

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Infestação da mosca-negra-dos-citros (Aleurocanthus woglumi Ashby) em pomares de citros, em sistemas de plantio convencional e agroflorestal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of removal of a non-native tree species Mimosa caesalpiniifolia Benth. on the regenerating plant communities in a tropical semideciduous forest under restoration in Brazil

Exotic species are used to trigger facilitation in restoration plantings, but this positive effect may not be permanent and these species may have negative effects later on. Since such species can provide a marketable product (firewood), their harvest may represent an advantageous strategy to achieve both ecological and economic benefits. In this study, we looked at the effect of removal of a non-native tree species (Mimosa caesalpiniifolia) on the understory of a semideciduous forest undergoing restoration. We assessed two 14-year-old plantation systems (modified taungya agroforestry system; and mixed plantation using commercial timber and firewood tree species) established at two sites with contrasting soil properties in São Paulo state, Brazil. The experimental design included randomized blocks with split plots. The natural regeneration of woody species (height ≥0.2 m) was compared between managed (all M. caesalpiniifolia trees removed) and unmanaged plots during the first year after the intervention. The removal of M. caesalpiniifolia increased species diversity but decreased stand basal area. Nevertheless, the basal area loss was recovered after 1 year. The management treatment affected tree species regeneration differently between species groups. The results of this study suggest that removal of M. caesalpiniifolia benefited the understory and possibly accelerated the succession process. Further monitoring studies are needed to evaluate the longer term effects on stand structure and composition. The lack of negative effects of tree removal on the natural regeneration indicates that such interventions can be recommended, especially considering the expectations of economic revenues from tree harvesting in restoration plantings.

Adubação fosfatada em variedades de cana-de-açúcar cultivadas em ambiente restritivo de cerrado

Pós-graduação em Agronomia - FEIS

Avaliação de plantadora de cana-de-açúcar com sulcador de desarme automático e rotação da esteira distribuidora

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do manejo do solo em atributos químicos, físicos e microbiológicos dos córregos Jaboticabal e Cerradinho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Greenhouse gas balance associated with sugarcane production in South-Central Brazil, considering the management and expansion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ensaios não-destrutivos de propagação de ondas em toras e madeira serrada de Pinus. taeda L.

In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on condition. P. taeda L wood (43 years old trees) from Horto Florestal of Manduri (latitude 230 00’ south, longitude 400 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better ju regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, cons right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences between the velocity of stress waves at juvenile wood, mature wood and pith regions. Keywords: stress wave method, velocity 17 destrutivos de propagação da propagação de ondas de tensão em toras e madeira serrada de taeda L. Hernando Alfonso Lara Palma - Universidade Estadual Paulista Faculdade de Ciências Agronômicas – FCA/UNESP – Botucatu - SP, e-mail: awballarin@fca.unesp.br Luiz Antonio Vasques Hellmeister - Universidade Estadual Paulista - Faculdade de Arquitetura, FAAC/UNESP – Bauru - SP, e-mail: hellmeister@faac.unesp.br Este trabalho teve como objetivo analisar a influência do tipo de lenho, da posição da tora ao longo do fuste e das dimensões das peças desdobradas, na velocidade de as de tensão (Stress wave method), na condição de madeira verde. P. taeda L., originária de árvores de plantio do Horto Florestal de SP., com idade aproximada de 43 anos, pela facilidade de identificação dos anéis imento e demarcação das regiões de madeira adulta e madeira juvenil. Foram amostradas 6 árvores distintas, escolhidas ao acaso do talhão selecionado. De cada árvore foram retiradas 4 toras com comprimento de 2,5 m cada. Foram demarcadas nas toras a ha central (8 cm de espessura) e 4 tábuas laterais (espessura comercial de 2,5 cm), sendo duas à esquerda e duas à direita da prancha central. Foram avaliadas as relações existentes entre as velocidades de propagação das ondas de tensão na madeira íntegra (toras) e desdobrada (pranchas e tábuas), na condição de madeira verde, nas três regiões distintas do lenho: medula, madeira adulta e madeira juvenil. A análise comparativa dos resultados revelou a concordância entre as velocidades antes e após o desdobr madeira. Houve diferenciação estatisticamente significativa entre as velocidades de propagação das ondas de tensão nos lenhos adulto, juvenil e na medula. -destrutivos, método das ondas de tensão, Pinus taeda stress wave tests on green logs and lumber of Pinus taeda In this paper it was evaluated the influence of the relative position of logs on the trees, the type of wood (juvenile and mature wood and pith) and the dimension of sawed wood elements on the velocity of propagation of stress waves into the material on L wood (43 years old trees) from Horto Florestal of Manduri (latitude 19’ west and altitude de 700 m) São Paulo State, Brazil were used, considering its easy growth rings visualization and the better juvenile and mature wood regions definition. Six trees were randomly chosen in the plantation. Trees were sawed into 4 logs (2,5 m long each. In each log it was delimited the central board (80mm tick) region and the lateral boards (25mm tick) regions, considering 2 boards on the left and 2 at the right hand. It were evaluated relation between velocity of stress waves on logs and the correspondent lumber (central and lateral boards), on green condition, on the three main region of the elements (mature wood, juvenile wood and pith). Comparative analyses of results obtained revealed the concordance between velocities of stress waves in the material before and after the its mechanical processing. It was also revealed statistical differences ty of stress waves at juvenile wood, mature wood and pith regions

Chuva e banco de sementes do solo em diferentes sistemas de restauração ecológica da floresta estacional semidecidual

Pós-graduação em Ciência Florestal - FCA

Avaliação de falhas na brotação da cana-de-açúcar em função da disponibilidade hídrica

The sugarcane is a crop of annual cycle, where its large water demand is not always full, causing stand gaps in the sprouting of ratoons. Thus, this study aimed to assess the stand gaps in the first and second ratoon sugarcane under seven levels of water deficit. The experiment was conducted in the Center of Agricultural Sciences of the Federal University of Alagoas in the period of 22 February 2010 to 20 February 2012. The stand gaps depending on water depths ranged from 11.2 (25% ETo) to 16.8% (100% ETo) in the first ratoon and from 24.8 (0% ETo) to 32.8% (100% ETo) on second ratoon. The average size of stand gaps ranged from 0.60 to 0.68 m in the first ratoon and from 0.70 to 0.74 m on second ratoon. The average distance to find a stand gap ranged from 16.8 to 29.5 m in the first ratoon and from 6.5 to 10.9 m in the second ratoon. The percentage of gaps and the average size of the gaps in the sprouting of ratoon increase with the age of the sugarcane plantation and the average distance between gaps decreases. The use of irrigation in the culture of sugarcane increase the percentage of gaps, but because these spaces are filled with culms of other sugarcane clumps and were irrigated with larger water depths, the agricultural productivity of the culture increases. The depths of irrigation decreases the average distance between gaps with more intensity in the first than in the second ratoon.