The influence of handrim design on the contact forces on hands'surface: a preliminary study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nonlinear angle control of a sectioned airfoil by using shape memory alloys

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Numerical tests of an adaptive sectioned airfoil actuated by shape memory alloys

The main objective of this work is to illustrate an application of angular active control in a sectioned airfoil using shape memory alloys. In the proposed model, one wants to establish the shape of the airfoil profile based on the determination of an angle between its two sections. This angle is obtained by the effect of the shape memory of the alloy by passing an electric current that modifies the temperature of the wire through the Joule effect, changing the shape of the alloy. This material is capable of converting thermal energy into mechanical energy and once permanently deformed, the material can return to its original shape by heating. Due to the presence of nonlinear effects, especially in the mathematical model of the alloy, this work proposes the application of a control system based on fuzzy logic. Through numerical tests, the performance of the fuzzy controller is compared with an on-off controller applied in a sectioned airfoil model.

Shape-independent expansion for the 3S1 - 3D1 mixing parameter

A low-energy shape-independent expansion is suggested for the function tan(2εBB)/(2k2), where εBB is the Blatt-Biedenharn mixing parameter for the 3S1 - 3D1 channel. This expansion allows an evaluation of the mixing parameter εBB from a knowledge of the deuteron asymptotic D to S ratio, pion mass and other low-energy observables, such as the scattering lengths, deuteron binding etc., of the nucleon-nucleon system. We demonstrate that the correct long range behavior of the tensor potential is essential for a realistic reproduction of εBB.

Quality and dose optimization in hand computed radiography

The objective of the present study was to optimize a radiographic technique for hand examinations using a computed radiography (CR) system and demonstrate the potential for dose reductions compared with clinically established technique. An exposure index was generated from the optimized technique to guide operators when imaging hands. Homogeneous and anthropomorphic phantoms that simulated a patient's hand were imaged using a CR system at various tube voltages and current settings (40-55 kVp, 1.25-2.8 mAs), including those used in clinical routines (50 kVp, 2.0 mAs) to obtain an optimized chart. The homogeneous phantom was used to assess objective parameters that are associated with image quality, including the signal difference-to-noise ratio (SdNR), which is used to define a figure of merit (FOM) in the optimization process. The anthropomorphic phantom was used to subjectively evaluate image quality using Visual Grading Analysis (VGA) that was performed by three experienced radiologists. The technique that had the best VGA score and highest FOM was considered the gold standard (GS) in the present study. Image quality, dose and the exposure index that are currently used in the clinical routine for hand examinations in our institution were compared with the GS technique. The effective dose reduction was 67.0%. Good image quality was obtained for both techniques, although the exposure indices were 1.60 and 2.39 for the GS and clinical routine, respectively.

Tradução para o português brasileiro, adaptação transcultural e validação do 3D Assessment of Hand Function

Pós-graduação em Bases Gerais da Cirurgia - FMB

The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.

Aeroelastic Analysis of a Typical Section Using of Shape memory wire actuator

Shape memory alloys (SMAs) provide a compact and effective actuation for a variety of mechanical systems. In this paper, a numerical simulation study of a three degree of-freedom airfoil, subjected to two-dimensional incompressible inviscid flow using a SMA is presented. SMA wire actuators are used to control the flap movement of a wing section. Through the thermo-mechanical constitutive equation of the SMA proposed by Brison, we simulate numerically the behavior of a double SMA wire actuator. Two SMA actuators are used: one to move the flap down and the other to move the flap up. Through the numerical results conducted in the present study, the behavior and characteristics of an SMA actuator with two SMA wires are shown the effectiveness of the SMA actuator. In conclusion, this paper shows the feasibility of using SMA wire actuators for flap movement, with success

Evaluation of discomfort in manual activities using hand mapping: the influence of age

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Use of Factor Analysis in the Development of Hand Sizes for Glove Design

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female subjects. Eliminating redundant measurements reduced the data to forty-six essential measurements. Factor analysis grouped the variables to form three factors. The factors were used to generate hand sizes by using percentiles along each factor axis. Two different sizing systems were created. The first system contains 125 sizes for male and female. The second system contains 7 sizes for males and 14 sizes for females. The sizing systems were compared to another hand sizing system that was created using the ANSUR database indicating that the systems created using factor analysis provide better fit.

Review of The Bible at Qumran: Text, Shape, and Interpretation, edited by Peter W. Flint

Review of The Bible at Qumran: Text, Shape, and Interpretation, edited by Peter W. Flint. Studies in the Dead Sea Scrolls and Related Literature. Grand Rapids, MI: Eerdmans, 2001. Pp. xv + 266. Price: $22.00. ISBN 0-8028-4630-0. This volume is another contribution to the Eerdmans series Studies in the Dead Sea Scrolls and Related Literature. The essays are loosely gathered around the topic "The Bible at Qumran," and the editor has divided the articles into two groups. Part 1, "The Scriptures, the Canon, and the Scrolls," includes articles by J.A. Sanders, B.W. Waltke, E. Ulrich, C.A. Evans, and the editor, P.W. Flint. The contributors to Part 2, "Biblical Interpretation and the Dead Sea Scrolls," are J.C. VanderKam, C.A. Evans, J.E. Bowley, J.M. Scott, M.G. Abegg, and R.W. Wall. Unlike other volumes of collected essays in this series, which have highlighted the work of a single author or published the proceedings of a particular conference, this collection has a more disparate origin. Some contributions were given as papers at the Dead Sea Scrolls Institute of Trinity Western University (Bowley, Ulrich, VanderKam and Wall), one (Waltke) is reprinted from The New International Dictionary of Old Testament Theology and Exegesis (Grand Rapids: Zondervan, 1997), and the rest (Abegg, Evans, Flint, Sanders and Scott) were invited for the volume.

Complexo Epidendrum secundum como modelo de estudo multidisciplinar na delimitação de espécies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological patterns and community organization in leaf-litter ant assemblages

We present a new approach to determine the number and composition of guilds, using the hyperdiverse leaf-litter ant fauna as a model, based on appropriate morphological variables and species co-occurrence null models to describe the complex assemblages of interacting Species Community structure at the 1-m(2) scale. We obtained 18 linear morphometric measures from 949 workers of 171 leaf-litter ant species (18762 measurements) surveyed in four Atlantic Forest localities to test whether the assemblages are morphologically structured; the morphological characters were selected to indicate diet and foraging habits. Principal components analysis was used to characterize the morphospace and to describe the guild structure (number of species and composition). The guild proportionality assembly rule (significant tendency toward constant proportion of species in guilds) was assessed at the 1-m(2) scale. Our analysis indicates that the division of leaf-litter ants into guilds is based mainly on microhabitat distribution in the leaf-litter, body size and shape, eye size, and phylogeny. The same guild scheme applied to four more sites shows that different Atlantic Forest areas have the same leaf-fitter ant guilds. The guild proportionality assembly rule was confirmed for most guilds, Suggesting that there are guild-specific limitations on species coexistence within assemblages; on the other hand, in a few cases the variance in guild proportion was greater than expected under the null assumptions. Other studies on ant functional group classification are partially supported by our quantitative morphological analysis. Our results, however, imply that there are more compartments than indicated in previous models, particularly among cryptic species (confined to soil and litter) and tropical climate specialists. We argue that a general null model for the analysis of species association based oil morphology can reveal objectively defined groups and may thus contribute to a robust theory to explain community structure in general and have important consequences on studies of litter ant community ecology in particular.

A new species of the neotropical catfish genus Trichomycterus (Siluriformes : Trichomycteridae) representing a new body shape for the family

Trichomycterus crassicaudatus is described as a new species from the Rio Iguacu basin in southern Brazil. The new species has an exceptionally deep posterior region of the body (caudal peduncle depth 22.8-25.4% SL), resulting in an overall shape which distinguishes it at once from all other members of the Trichomycteridae. The caudal fin of the species is broad-based and forked, a shape also distinguishing it from all other species in the family. A number of autapomorphic modifications of T. crassicaudatus are associated with the deepening of the caudal region, including an elongation of the hemal and neural spines of the vertebrae at the middle of the caudal peduncle. Phylogenetic relationships of the new species are yet unresolved, but it shares a similar color pattern and a thickening of caudal-fin procurrent rays with T. stawiarski, a poorly-known species also from the Rio Iguacu basin. Coloration and body shape also include similarities with T. lewi from Venezuela.

Investigating South American biogeographic history using patterns of skull shape variation on Cerdocyon thous (Mammalia: Canidae)

Patterns of geographic variation of the canid Cerdocyon thous have historically been obscured by its remarkable intraspecific morphological variability. The observed distribution is highly associated with phytophysiognomy, a feature considered highly dynamic along geological time. In the present study, we tested whether vegetation distribution during the Holocene Glacial Maximum of South America (HGM) explains the patterns of morphological variation within Cerdocyon thous. The species was divided in groups according to paleohabitats that could support their presence during the HGM, and then tested for differences in skull morphometrics. The results obtained demonstrate that the climatic changes during the HGM influenced the population structure of this species, resulting in the establishment of geographical groups with different degrees of morphological cohesion. Higher morphological cohesion found in the Northern group might be explained by the marked discontinuity between its geographical range and the rest of the species`distribution. The Eastern and Southern morphological divergence is less striking and, although this could be related to past vegetation distribution, the disappearance of those barriers leads to a population structure that could be slowly breaking down. (C) 2009 The Linnean Society of London, Biological Journal of the Linnean Society, 2009, 98, 77-84.