[A descriptive epidemiological study on canine babesiosis in the Lake Geneva region]

A descriptive study was carried out in the district of the Lake Geneva between March 1, 2005 and August 31,2006 to assess the incidence and prevalence of canine babesiosis, to genotype the Babesia species occurring, to assess the most frequently clinical signs found and to address the potential of autochthonous transmission. This included a data assessment on the different tick-populations occurring in the area and on the prevalence of Babesia-DNA in these ticks. A total of 56 veterinary practices participated in the study. By blood smear and PCR, Babesia canis canis was found in 12 out of 21 cases with suspected babesiosis. In an additional 13th case, the parasite could only be detected by PCR. All autochthonous cases originated from the Western part of the Lake Geneva region. Clinical signs in affected dogs included inappetence, apathy, anemia, fever, hemoglobinuria and thrombocytopenia. There were no risk factors with regard to age, sex and breed. Most cases were diagnosed during the spring periods of 2005 and 2006 (11 cases) and two cases in autumn 2005, coinciding with the main activity period of Dermacentor reticulatus, the main vector of B. canis canis. A total of 495 ticks were collected on patients by the veterinarians, 473 were identified as Ixodes sp., 7 as Rhipicephalus sanguineus and 15 as Dermacentor reticulatus. While Ixodes sp. was found in the whole study area, D. reticulatus and R. sanguineus occurred only in the Western part till Lausanne. PCR and sequencing yielded B. canis canis positivity in 3 D. reticulatus specimen, these three ticks were collected from two different dogs both suffering from babesiosis. All R. sanguineus were negative by Babesia-PCR. Global warming, ecological changes in the potential habitat of ticks, increasing host- and vector-populations and increasing mobility of dog owners may be responsible for an emergence situation of infection risk for Babesia spp. by time. E.g., Dermacentor reticulatus has become autochtonously prevalent already till Lausanne in the Lake Geneva region, and further surveillance is suggested to tackle this problem.

Coronary artery stent geometry and in-stent contrast attenuation with 64-slice computed tomography

We aimed at assessing stent geometry and in-stent contrast attenuation with 64-slice CT in patients with various coronary stents. Twenty-nine patients (mean age 60 +/- 11 years; 24 men) with 50 stents underwent CT within 2 weeks after stent placement. Mean in-stent luminal diameter and reference vessel diameter proximal and distal to the stent were assessed with CT, and compared to quantitative coronary angiography (QCA). Stent length was also compared to the manufacturer's values. Images were reconstructed using a medium-smooth (B30f) and sharp (B46f) kernel. All 50 stents could be visualized with CT. Mean in-stent luminal diameter was systematically underestimated with CT compared to QCA (1.60 +/- 0.39 mm versus 2.49 +/- 0.45 mm; P < 0.0001), resulting in a modest correlation of QCA versus CT (r = 0.49; P < 0.0001). Stent length as given by the manufacturer was 18.2 +/- 6.2 mm, correlating well with CT (18.5 +/- 5.7 mm; r = 0.95; P < 0.0001) and QCA (17.4 +/- 5.6 mm; r = 0.87; P < 0.0001). Proximal and distal reference vessel diameters were similar with CT and QCA (P = 0.06 and P = 0.03). B46f kernel images showed higher image noise (P < 0.05) and lower in-stent CT attenuation values (P < 0.001) than images reconstructed with the B30f kernel. 64-slice CT allows measurement of coronary artery in-stent density, and significantly underestimates the true in-stent diameter compared to QCA.

Three dimensional finite element simulation of polymer melting and flow in a single-screw extruder : optimization of screw channel geometry

Single-screw extrusion is one of the widely used processing methods in plastics industry, which was the third largest manufacturing industry in the United States in 2007 [5]. In order to optimize the single-screw extrusion process, tremendous efforts have been devoted for development of accurate models in the last fifty years, especially for polymer melting in screw extruders. This has led to a good qualitative understanding of the melting process; however, quantitative predictions of melting from various models often have a large error in comparison to the experimental data. Thus, even nowadays, process parameters and the geometry of the extruder channel for the single-screw extrusion are determined by trial and error. Since new polymers are developed frequently, finding the optimum parameters to extrude these polymers by trial and error is costly and time consuming. In order to reduce the time and experimental work required for optimizing the process parameters and the geometry of the extruder channel for a given polymer, the main goal of this research was to perform a coordinated experimental and numerical investigation of melting in screw extrusion. In this work, a full three-dimensional finite element simulation of the two-phase flow in the melting and metering zones of a single-screw extruder was performed by solving the conservation equations for mass, momentum, and energy. The only attempt for such a three-dimensional simulation of melting in screw extruder was more than twenty years back. However, that work had only a limited success because of the capability of computers and mathematical algorithms available at that time. The dramatic improvement of computational power and mathematical knowledge now make it possible to run full 3-D simulations of two-phase flow in single-screw extruders on a desktop PC. In order to verify the numerical predictions from the full 3-D simulations of two-phase flow in single-screw extruders, a detailed experimental study was performed. This experimental study included Maddock screw-freezing experiments, Screw Simulator experiments and material characterization experiments. Maddock screw-freezing experiments were performed in order to visualize the melting profile along the single-screw extruder channel with different screw geometry configurations. These melting profiles were compared with the simulation results. Screw Simulator experiments were performed to collect the shear stress and melting flux data for various polymers. Cone and plate viscometer experiments were performed to obtain the shear viscosity data which is needed in the simulations. An optimization code was developed to optimize two screw geometry parameters, namely, screw lead (pitch) and depth in the metering section of a single-screw extruder, such that the output rate of the extruder was maximized without exceeding the maximum temperature value specified at the exit of the extruder. This optimization code used a mesh partitioning technique in order to obtain the flow domain. The simulations in this flow domain was performed using the code developed to simulate the two-phase flow in single-screw extruders.

Descriptive Statistics and Linear Regression

This morning Dr. Battle will introduce descriptive statistics and linear regression and how to apply these concepts in mathematical modeling. You will also learn how to use a spreadsheet to help with statistical analysis and to create graphs.